WM6.1 Wifi not working - Tilt, TyTN II, MDA Vario III General

After update to WM6.1 wifi not working anymore...
Any idea?

any information as to hows and why its not working? wont turn on, wont connect etc

I make upgrade from HTC site , it's official upgrade
When I turn on wifi , I see connection in progress , wifi not available
Can't detect any wlan , but wifi is turned on..

Thats strange in that I have the HTC WM 6.1 official ROM (and included radio - very important as the radio has to be compatible) on my TyTN II and Wifi works fine. Have you checked that the other wireless networks you say aren't showing up are still switched on? Did you perform a hard reset after flashing the new ROM? Try altering the Wifi battery/performance slider to give better performance if the Wlans you used to see are of weak signal strength.
After you get the Wlans to show up, you'll need to go through the process of entering the required passwords again as the ROM update removes all your original configuration settings/entries.

With HARD RESET now working ok!

Related

NO WIFI connection after upgrade RUU_Prodigy_2170706 FRE

Anyone has an idea how to solve this?
i have installed the new RUU_Prodigy_2170706_21707106_20710_QTEK_FRA_Ship ROM on my qteck9100 and all went fine, all works perfectly execpt WIFI
Now each time i want to connect to my wifi network its goes on a neverending seraching, trying to connect end nothing.
I tryed wiht the WAP security on, without any security , without an mac adress filter but no way to connect.
i tryed also to go back to ROM RUU_Prodigy_2080702_102_11310_QTEK_FRA_Test that worked perfectly but i have an error message saying that the rom is not compatible with the device..
suggestions are welcome
thamks
sorry cant help too much, im in the same boat, tryed two different roms now, but no go
finds the network, asks if you want to connect, then after a few mins it stops trying to connect!
Also in the available networks list, they stay available even tho some of them i passed a mile or so ago in my car!
I finally could install RUU_Wizard_1050412_WWE_101_11210_WWE ROM and with the DJVW HTC Wizard Optimizer the Wifi wrok perfectly
with the old 2.08 test and the Optimizer,the wifi connection was fine.
Maybe with this last ROm 2,17 the Optimizer don't work ..
im running Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe.html
but still not working for me, whats this, DJVW HTC Wizard Optimizer ? cheers
DJVW HTC Wizard Optimizer installed and still the same, ohwell,
I had the same problem until I adjusted the NIC power settings to favour better performance it would then connect..
I read somewhere on here that another user had to stand nearer to the AP to connect but once connected all was fine?
same issue for me ...
slurp said:
I had the same problem until I adjusted the NIC power settings to favour better performance it would then connect..
I read somewhere on here that another user had to stand nearer to the AP to connect but once connected all was fine?
Click to expand...
Click to collapse
i had the k-jam ontop of the router, and nothing
I tryed the WIFI connection in a public place with a provider called
"monzoon" and its worked fine.
As this acces is a 802.11b i start really to belive that "Wizard optimizer" do not work with the new ROM
At home with my Belkin Pre-N router that works only on mode "G" and "B+G" i still have no connection.
There is no change if i change performance setting and by the way with the piblic network i was on "best battery" and not on "best performance"

wifi signal prob

hi
i've upgraded to helmi's latest rom.
however, my wifi strength seems to be hovering ard 35-40% mark when i am near my router... any fix i can download?
thanks
dericion said:
hi
i've upgraded to helmi's latest rom.
however, my wifi strength seems to be hovering ard 35-40% mark when i am near my router... any fix i can download?
thanks
Click to expand...
Click to collapse
Is the connection dropping out?
If the connection is working fine at the required radius, don't let what the meter says concern you.
wifi
the signal did drop out when i am out of my study room where my router sits.
it used to still connect the wifi.
any help?
Sounds obvious, but have you any new electrical equipment that may be causing interference??
This was happening to me if I tried and use wifi in the Kitchen, because of the fridge!!
I used sktools to change to G mode compatibility and it stopped.. Could just be a fluke though!!
wifi
hi all
tried that but the signal still the same
wifi - wlan problem
Hi,
i've updated my VPA III (BlueAngel) with Xplode's latest R4 image. It's a very nice work xplode!
But I can't turn my wifi on. If I go to the wireless and turn on wifi like discribed in the other threads i can see the left green led (for wifi) blinking like wifi is switched on but the software says still wifi is turned off. it also doesn't work in the comm manager.
thanks
Ebo
i will describe more specific the wifi turning on procedure(you should perform it once after boot, and then use comm manager until reboot):
1. turn on wifi trough wireless manager, it turns on and the turns off by itself
2. turn on wifi from comm manager, now you can control it from comm mnager, enable disable
thank you for the datail infos but I also tried this before and whatever I try nothing helps. It keeps like I described it:
when i do your first step
1. turn on wifi trough wireless manager, it turns on and the turns off by itself
---> the left green hardware led beginns to blink like wifi is physically enabled
but i can't get any access to it and the wireless item on the today screen says still "Wi-Fi: Unavailable"
and the secon step
2. turn on wifi from comm manager, now you can control it from comm mnager, enable disable
-->seems to has simply no effect
before with an older helmi and the original vodaphone software i also had some promblems like sometimes i had to do a soft reset before i could use wlan
is there any way to debug it like a log file or this KITL!?
i also tried a new software update and I cleaned the registry hive and i've formated the storage
@xploe i use your latest release xplode R4 lazy release and at the boot screen appears
R 1.15.00
D 1337.45
G 5.35.04.WWE
dericion said:
hi
i've upgraded to helmi's latest rom.
however, my wifi strength seems to be hovering ard 35-40% mark when i am near my router... any fix i can download?
thanks
Click to expand...
Click to collapse
Can I ask did u notice this problem before you upgraded & were hoping to solve it via upgrade?.
If your wifi board is on its way out or the antenna has taken one blow two many and let go. No amount of flashing could help.
Did the problem only arise after flashing?.

Kaiser - Wifi Problem - Any solutions??

Hi everyone,
I got my new Kaiser (AT&T Tilt) last week, unlocked of course, and I have reformatted it yesterday, and since then, I am unable to get Wifi to connect to any network! The device shows me the available network and everything, but it says it's connecting to them and then it just says they're available
Any solutions? Suggestions?
-W.
TyTN X said:
Hi everyone,
I got my new Kaiser (AT&T Tilt) last week, unlocked of course, and I have reformatted it yesterday, and since then, I am unable to get Wifi to connect to any network! The device shows me the available network and everything, but it says it's connecting to them and then it just says they're available
Any solutions? Suggestions?
-W.
Click to expand...
Click to collapse
same here.... but no solutions yet....
What ROMS/Radios are you using?
Actually, a solution that would work is to power cycle the device (remove the battery for a few mins out of the device, put it back in, and run again) however, I am not sure about this solution as it may be a temporary one!
The ROM I have is:
1.57.502.2
Radio:
1.27.12.11
Any suggestions on the ROM/Radio?
-W.
just a suggestion of what works for me.......my POS router, i can only connect to it if the wifi power mode on the kaiser is set to best performance. same sh*t with the wizard and the hermes. i seriously should get a new router
i had the same issue. But today i triedd q-mobile rom, which has a different radio than before. It works now. I am finally connected to my router. I have a Tilt as well.
I've noticed variations in performance and willingness to connect to APs depending on the Radio version. On 1.27.12.32 it would sometimes connect, other times not - and take a long time! On 12.17 it connects pretty quickly to most APs. If it doesn't, I turn Wifi off, then on.
Actually, It used to connect to the same network (probably different AP) with no problems at all!
I encountered the same issue today, and even after a powercycle the same thing happened..
BiPolarXpress said:
i had the same issue. But today i triedd q-mobile rom, which has a different radio than before. It works now. I am finally connected to my router. I have a Tilt as well.
Click to expand...
Click to collapse
I had the same problems you guys had. tried to connect then would say available.
i took your advice. first i tried to install the radio that comes with the q-mobile. i couldnt install it to my phone, the screen would black out.
next i went ahead and installed the latest version of q mobile. now it works. and btw q mobile is one fast freaking rom! the screen goes from landscape to portrait in a flash!
thanks!
Mine abruptly started not connecting to any network as well. I'll try the powercycle idea. I have the AT&T standard ROM.
ranger47 said:
Mine abruptly started not connecting to any network as well. I'll try the powercycle idea. I have the AT&T standard ROM.
Click to expand...
Click to collapse
So if I powercycle it it works, except that when I try and connect to what wifi it works for a minute or so and then causes the same problems.
ok, need help with my wifi also, if I go to Wireless Lan settings it says LAN is off, and has a link to click to turn it on, I click it and it connects, shows info including signal strenth, then it disconnects.........it wont stay connected
jsnone1 said:
ok, need help with my wifi also, if I go to Wireless Lan settings it says LAN is off, and has a link to click to turn it on, I click it and it connects, shows info including signal strenth, then it disconnects.........it wont stay connected
Click to expand...
Click to collapse
I am facing the same problem. anyone help?
Hmm, sounds like the same problem I was having. See http://forum.xda-developers.com/showthread.php?t=366526
Not really a fix but a better workaround than having to reboot all of the time.
Wifi Problems with TyTn II
I have a HTC TyTn II and i have some problems with "wlan".
I cannot connect with my router.
I tried it even withouth a security key but it says connecting and for the rest nothing happens.
Ive resetted my router to default settings so everything is open but still i cannot connect my phone to the router.
My router brand is:SMCWBR14S-N2.
Details of my Phone:
Rom version: 1.56.404.6
Rom date: 08/28/07
Radio Version: 1.27.12.32
I hope you guys can help me, Thnx
Hi,SMCWBR14S n2 router the same problem for me but when i turn it to 802.b it works.
I think there is something in the mixed mode what the pda dont respect.
I have a similar problem, but with a twist.
When I'm at my parents, I can connect to their BT Homehub Wifi with no problems at all, even on power-saving wifi mode.
At my house, I have a Siemens Wifi router (from Tiascali), and I cannot connect to this (says it is available, shows signal strength, but won't successfully connect) unless I turn off the encryption/security key.
The only difference between the two networks (apart from the names) is the BTHomehub uses 64bit WEP key and the Siemens uses WPA-PSK key (AES/TKIP not specified in router setup page). I can change the key method on the Siemens to 64bit WEP, but it still won't connect. My laptop connects without problems to both networks.
Is this a problem with encryption handling by the Kaiser?
ROM: Dutty's WM6.1 WWE 29/04/08
Radio: 1.65.14.06 (tried the other radio version of Dutty's rom with same results)
Chris
edit: verfarkas, that's something I haven't trued yet - I'll give it a go when I get home tonight. That would be a nice simple fix - by default, my Siemens router has the "b" (and other suffixes) chosen automatically.
Change to best performance
I was having all of the above problems until I set my power save mode to "Best Performance". Go to settings -> Connections -> Wireless LAN

Internet Sharing problem

So I connect to internet on PC via Kaisers USB which connects to HSDPa.
Problem is that HSDPa connection disconnects aprox. every 8-10mins.
I dont know why, on my Wizard everything works fine.
Where is the problem?
Thanks.
BUMP
So, im using kaisers internet connection on mine PC (internet sharing,usb) and every 10minutes connection drops.
Where is the problem?
Thanks.
Please provide some additional information. Such as: Carrier, ROM version, and Radio version.
I frequently tether for several hours at a time and do not have an issue with disconnects, so there is probably a settings issue that will not come to life until we know a little more about your situation.
NotATreoFan said:
Please provide some additional information. Such as: Carrier, ROM version, and Radio version.
I frequently tether for several hours at a time and do not have an issue with disconnects, so there is probably a settings issue that will not come to life until we know a little more about your situation.
Click to expand...
Click to collapse
Carrier name is "VIP" , location: Europe(Croatia)
ROM: WM 6.1(nothrills)
r 1.65.14.06
g 25.81.40.02H
d 3.14.00.00
I had the same network setup on HTC Wizard and everything worked just fine...
Have you tried any other ROMs or radios? I was able to tether using the NoThrills ROM back when I was running it.
You can also try reflashing the same ROM and radio again in order to eliminate any possible problems stemming from a "bad flash".
Do you have the kaiser tweak installed?
No i didnt try any other ROM or radio..
Everything works fine on that ROM and radio ,only internet sharing is a problem..
And yes i have installed KaiserTweak.
Do you have it set to disconnect your internet?
No i didnt set to automatic dissconnection...
Maybe try another tilt or reset the phone????
huh...i've finally setup everything on this ROM and everything works very nice...so i dont want to flash another ROM (of course if this is only solution, i will..)
strange how nobody had this problem..
NoThrills is a WM6.1 ROM, and your phone would have shipped with a 6.0 based ROM since 6.1 isn't out yet. Did you have this problem prior to flashing to NoThrills?
Well i didnt try on 6.0 original rom...
I've flashed it same day i've got it..
Think i will flash some other ROM..
Any suggestions?
Thanks.
When you say that HSDPA disconnects are you sure it's disconnecting or just downgrading to idle. On my Kaiser I see that when the connection needs to pull data from the net, the icon changes to H (HSDPA) and when idle it changes to just 3G but remains connected. I can see that it remains connected because the signal icon has the 3G logo on top of it.
Cheers!
Rayan
I noticed too that when connection is idle stands 3G icon and when downloading there is H.
But yes, it just disconnects..
When I'm using connection on Kaiser(not internet sharing), it doesn't disconnects..

6.5 ROMs & 3G connection issues

Don't know if anyone else is having these issues! Kaiser shows its connected to 3G on the home screen, however if i attempt to make a call/update weather or go online in anyway the signal drops out taking a while to reconnect to gsm/gprs standard. I have had this issue with JJ's latest rom and shifu's 6.5 roms. It's kind of annoying as gprs is so slow. It isn't the Kaiser or Orange UK as 3G works fine on 6.1/6.0 roms. Any Ideas????
Should mention, i've tried most of the 1.65 and 1.71 radios, still having this issue.
Have you verified that your settings are correct, did you try re-running Connection Setup?

Categories

Resources