First, sorry about my english, I'm a Spanish boy (from www.htcmania.com forum) who thinks that had discovered the reason why 1800mha chinnese batterys doesn't work with GPS.
Make a test.
Start tomtom or similar program and when you got satellites, put off the back of the diamond. Suddenly, GPS reception gets out.
This is, I think after make some tests, because at the back of the diamond (not in the cover) it has two light sensors that when detect light automatically turn off the GPS antenna and makes tomtom not able to get satellites coverture.
I think that this it should be in the most important forum about Diamond to be able to argue about it.
Bye.
Att. Raul
P.D: Another time, sorry about my english level...
sensores de luz?? cuales?? en donde estan?? no logro ver donde estarian esos sensores de luz...
charly_mx said:
sensores de luz?? cuales?? en donde estan?? no logro ver donde estarian esos sensores de luz...
Click to expand...
Click to collapse
EN la parte trasera destapada, son dos circulos con unas letras que parece poner VOD, uno esta al lado de la camara, y el otro en la parte inferior izquierda.
Ponle fotos marcando esos sensores ayudará mucho. Por cierto tu inglés es de alto nivel no te tienes pq excusar
maximo88 said:
Ponle fotos marcando esos sensores ayudará mucho. Por cierto tu inglés es de alto nivel no te tienes pq excusar
Click to expand...
Click to collapse
no tengo ninguna camara para hacer una foto a la parte trasera de la diamond, si alguien es tan amable de colgar una foto de la parte de atras os enseño donde estan.
Saludos
And how about speaking english????... If it was to speak spanish you guys could as might as well stayed in your spanish forum...
Anyway...there's no light sensor on the back of the device...Those VOID stickers are covering holes which have screws underneath, so that if you damage those stickers to remove the screws, you'll loose warranty...
Also, I've spoken with HTC support, and they told me that the about those batteries, is that they produce some kind of electromagnetic interference, which cause the loss of signal...it's as simple as this...
HastaSSSS
Here is a phto off the back of my Diamond without its cover :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where do you think these sensors are ?
I confirm what s1rl4ncel0t said : these stickers VOID (not VOD) cover screws and mean that if the sticker is removed warranty is void...
I ordered a few days ago a 1900mAh battery and I'll check
s1rl4ncel0t said:
And how about speaking english????... If it was to speak spanish you guys could as might as well stayed in your spanish forum...
Anyway...there's no light sensor on the back of the device...Those VOID stickers are covering holes which have screws underneath, so that if you damage those stickers to remove the screws, you'll loose warranty...
Also, I've spoken with HTC support, and they told me that the about those batteries, is that they produce some kind of electromagnetic interference, which cause the loss of signal...it's as simple as this...
HastaSSSS
Click to expand...
Click to collapse
That is what they have told tou you, and the reason is to sell more original batteries.
Tray that, using tomtom uncover the back of the diamond and see what hapen. Then do the same but without lights in the room. Obviusly, it has to be an light sensor, can not be what I thought, but there is for sure.
Howell said:
Here is a phto off the back of my Diamond without its cover :
Where do you think these sensors are ?
I confirm what s1rl4ncel0t said : these stickers VOID (not VOD) cover screws and mean that if the sticker is removed warranty is void...
I ordered a few days ago a 1900mAh battery and I'll check
Click to expand...
Click to collapse
Yes, you have reason, but the sensor is there, I don't know where. Do that test, open tomtom and when is connected, pull off the back cover, coverage will disapear, but if you do that in a room without light, does not happen .
Rul3s said:
Yes, you have reason, but the sensor is there, I don't know where. Do that test, open tomtom and when is connected, pull off the back cover, coverage will disapear, but if you do that in a room without light, does not happen .
Click to expand...
Click to collapse
this is utter rubbish! i opened iGo8 and when i had GPS signal i took the cover off and i STILL had signal, i kept the cover off for 10 minits and NOTHING happened!!
Only happens with tomtom? wtf?
So... I decided to test by myself...
1) have the GPS fix and then remove cover
-> GPS reception becomes bad (half of previous values) and fix is gone in seconds
2) leave the cover removed and cover with hand
-> GPS reception comes back to previous values !!!
3) remove hand :
-> GPS reception becomes bad (half of previous values)
4) cover with a cloth :
-> GPS reception is still bad
So this may not be a light sensor but an electromagnetic interference is possible (and that's what HTC says) because there is metal in the cover and human body can makes such interference...
BTW : I tested and obtained the same results with TomTom 7 and Igo8 so this is NOT TT7 specific
Howell said:
So... I decided to test by myself...
1) have the GPS fix and then remove cover
-> GPS reception becomes bad (half of previous values) and fix is gone in seconds
2) leave the cover removed and cover with hand
-> GPS reception comes back to previous values !!!
3) remove hand :
-> GPS reception becomes bad (half of previous values)
4) cover with a cloth :
-> GPS reception is still bad
So this may not be a light sensor but an electromagnetic interference is possible (and that's what HTC says) because there is metal in the cover and human body can makes such interference...
BTW : I tested and obtained the same results with TomTom 7 and Igo8 so this is NOT TT7 specific
Click to expand...
Click to collapse
Did you tried without cover or nothing with lights off?? In my case GPS reception becomes good!!
Rul3s said:
Did you tried without cover or nothing with lights off?? In my case GPS reception becomes good!!
Click to expand...
Click to collapse
Sorry but light off or on without cover shows the same reception values for me...
Tested also with Copilot 7 and Sygic : same results... So IMHO we can exclude software specific issue and hypothetical light sensor too...
Related
Hi
Yesterday, while i was talking with my girl with my himalaya i was eating milk flakes. By my mistake my himalaya fell into milk, when on voice connection. Only thing which has not been into milk is microphone and dpad. I told her that my himalaya is in milk but I could talk anyway (lol). I got my himalaya out of milk, told that I must disconnect and then himalaya died. I tried to run it but all up buttons are connected (pressed) so it went into hardreset mode. I tried to run without any changes (NO, NO, NO) and it ran but all buttons without dpad and phone buttons were pressed. Today, after dry night, I tried to run. There is some changes: Digitizer failed, screen has dark stains, buttons are sometimes pressed, but I can run without HR mode.
What should I do?
PL
Siemka
Widzę niezła wtopa W każdym razie nie włączaj już telefonu dopóki go nie wyczyścisz bo tylko pogorszysz sytuację
Po pierwsz kup izopropanol(jak nie wiesz gdzie to napisz na priva), tylko uważaj na ceny bo na necie za 100ml się płaci 30zł a normalnie z 1l się płaci 5zł
Rozbierz telefon na części pierwsze, następnie weź pałeczki kosmetyczne mocz je obficie w izopropanol i czyść płytkę telefonu z zabrudzeń aż do skutku.
Ekranu nie uratujesz za bardzo już zostanie jak jest Pewnie mleko weszło między folię ekranu i tego się już nie da naprawić
Powodzenia
In english
I see you had quite an accident Dont try to turn on phone again until you clean him because situatiom might get worst
First you need to buy a isopropylene(if you dont know where to buy pm me), watch out for price this should cost 5zł for 1l
Then dismantle your hima, take cosmetic stick wet in isopropylene and clean PCB until you dont see any milk on it.
Screen is doomed, so stain is not removeable.
Good luck man
Do not swich on your device till it's totally dryed and cleaned !!!
Look here:http://forum.xda-developers.com/showthread.php?t=275788
and search/google for 'dismantle' there are instructions.
eg:http://www.mikechannon.net/
I put my himalaya into Nail polish remover water... No acetylen, just alcohol and glicol. Now it turn on - anything works except 2 things:
- No standby button (vacuumed into vacuum cleaner, lol) Must have subtitute
- Darken plames on display shown there:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to fix? Any suggestions?
As i said before, you cant fix your screen. The only thing you can do is replace with another one
Stand by button can be easly replaced with some rubber and plastic
As mj_weed said, you'll need a replacement part. I'd suggest dismantling it first and inspecting both the LCD and digitizer. It may be one or the other (or possibly both).
Taking apart the digitizer and the display!!!
TaurusBullba said:
As mj_weed said, you'll need a replacement part. I'd suggest dismantling it first and inspecting both the LCD and digitizer. It may be one or the other (or possibly both).
Click to expand...
Click to collapse
Even Moderator sometimes are wrong!
Dismantle the device and disconnect the TS/Display from the mainboard.
After that, take out the display by using a small screwdriver to remove the 2 screws fixing the display and the speaker.
After that, push the small plastic lashes on the sides of the display and take it out of the cover upwards.
Now, you should have the metal back covering a white plastic frame and the digitizer mounted on the front.
The digitizer can be carefully removed, using a razor blade.
From now on: no more dust around!!!! (to aero: no milk!!!) Ha, Ha, sorry.
It is fixed with super thin double sided soldering tape. As you have been carefully enough and didn't brake the glass part of the TS you can fix it after cleaning without the need of something new.
The display itself can be take apart with the same screwdriver opening the sides of the metal back. Don't bend the metal, it is is just clipped.
Inside there are some (1 or 2?) filmslides and the back side of the display to clean .
This should have been all. In case the digitizer is broken, I recovered one of the broken display of my 8.5! Euro Alpine. (No joke!)
The (used) replacement display, I bought at X-mas came from china.
10 Euro cost (differs on changing course) and 12 Euro shipping.
There are still some left!! It took about 14 days to arrive, so it is worth waiting, as this is still half the price of a new one!!!
Good luck, to everyone on your own DIY-experiences.
http://forum.xda-developers.com/showthread.php?t=338671
My digitizer works , even better.
aeroflyluby said:
My digitizer works , even better.
Click to expand...
Click to collapse
Good to hear, I think it's some rest of your breakfast on the milky filmslides that should cover the back of the display to brighten it via the LED at the bottom of that white frame.
You vacuumed your I/O knob? Crazy.
The next cheap XDA II I by at that big auction store, I'll send efsane in case you fix yours!!!
Luby cries.
aeroflyluby said:
Luby cries.
Click to expand...
Click to collapse
Ok. the next device will be yours as donation!
Ask Ather, we'll get that managed.
Is yous still broken (or ready to get flashed again), or do you need one as secondary device?
My himalaya can be used... as a secondary monitor, sms server, and as a brick.
No sound anyway.
I'm going to sell my guitar to buy next windows mobile phone, now it is toshiba g900 turn!
muckelmaus said:
Even Moderator sometimes are wrong!
Click to expand...
Click to collapse
Of course we can be!
I had a similar issue and unfortunately no amount of cleaning resolved it. In my situation, I needed a new LCD. Often times that's the case, that's why it's always a good idea to take it apart first and check it out for yourself. Good luck to all!
Good news, to all who like aoeroflylubys' roms, a new used device is on the way!
same thing happened to me when we had the great flood back in Oct., I was able to restore my HIMA by drying it up bt the digitizer stoped working. i tried removing the digitizer and i learned that it was jst a piece of glass that sticks above the LCD. It could be possible that some of the liquid is still stuck in the middle of the LCD and the digitizer mirror. I think it realy needs a replacement of the digitizer. what i did to my HIMA was I bought a replacement LCD from Ebay in china and it works fine now.
I'm sorry, friend.
HI aeroflyluby
I had my fall But as a final screen, you lose and I need to change it.
I've carved out. Inside a plastic sheet multi-nested.
1. When you need water to quickly remove the LCD screen of your Ecedngm out and make it dry.
2. You be careful if you never fix it. But I am a mechanic by telephone.
3. In the end, you will definitely change the screen. The monitor in my price used is very rare and expensive.
Dear admins and mods, please close this thread, as it outdated 5 month now!!
I donated a working device to luby and he became one of the most active cookers (beside
YAHAHANUVOELEGANLC) since then.
I'm still working on a cheap hima for efsane, as his roms are still present and wanted here.
It's my way to show those cockers, that their work is worthfull.
Thanks to globalization :http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=180488280008&ssPageName=STRK:MEWNX:IT
and the football world championships: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=290443901819&ssPageName=STRK:MEWNX:IT (Brasilia played at the same time, and no one looked into the internet)
I coupled a new project of mine, less then 12 euros!! (BTW my first non HTC device)
So, I am really convinced, to get a new used hima for efsane at last, to get him back to our beloved forum.
Sunday important game for us to keep on the battle!!!
VAMOS MÉXICO!!!!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let's be honest, when it comes to soccer, nobody is that much better then Mexico/Mexicans. I've seen it.
Congrats, you beat the French.
MEXICO FTW.....
Im all USA but I didnt want france to win
2-0 Mexico as winner!!!!
Now let´s go for Uruguay!
¡Qué maravilla!
Congrats, a great display, high tempo, very entertaining.
Best of luck vs Uruguay, I think Mexico will win 2-1 (& you should have beaten England in that pre-WC friendly )
paul c said:
¡Qué maravilla!
Congrats, a great display, high tempo, very entertaining.
Best of luck vs Uruguay, I think Mexico will win 2-1 (& you should have beaten England in that pre-WC friendly )
Click to expand...
Click to collapse
Good luck to you on Monday....
paul c said:
¡Qué maravilla!
Congrats, a great display, high tempo, very entertaining.
Best of luck vs Uruguay, I think Mexico will win 2-1 (& you should have beaten England in that pre-WC friendly )
Click to expand...
Click to collapse
Gracias!!
I hope this 2-1 too
Mi espanto es que pasara lo mismo que en el partido anterior. El problema con nuestra selecc no parece ser tanto armar las jugadas sino darle al balón la última patada aparte como que hay mucho sentimiento en todo ésto. Si les meten un gol se awitan y todo chafea, si meten un gol se sienten los reyes del mundo y juegan como tales
Lo mejor para la selec ahora con Urugay
g1shift said:
Let's be honest, when it comes to soccer, nobody is that much better then Mexico/Mexicans. I've seen it.
Click to expand...
Click to collapse
That's a very wise man talking
g1shift said:
Let's be honest, when it comes to soccer, nobody is that much better then Mexico/Mexicans. I've seen it.
Click to expand...
Click to collapse
naaa Germany is better and brazil rocks
Diamond_dawg said:
naaa Germany is better and brazil rocks
Click to expand...
Click to collapse
Wanna fight, dude!? I won't let you talk like that to my dear and close friend
Naa, just kidding. I don't think we (Mexico) are even in the top 10
LauraAmerica said:
Wanna fight, dude!? I won't let you talk like that to my dear and close friend
Naa, just kidding. I don't think we (Mexico) are even in the top 10
Click to expand...
Click to collapse
G1shift your friend?
Diamond_dawg said:
G1shift your friend?
Click to expand...
Click to collapse
Nah, I just support any good comment about Mexico
LauraAmerica said:
Nah, I just support any good comment about Mexico
Click to expand...
Click to collapse
Mexico are Poo, na just kidding
There probly alot better than England
LauraAmerica said:
Wanna fight, dude!? I won't let you talk like that to my dear and close friend
Naa, just kidding. I don't think we (Mexico) are even in the top 10
Click to expand...
Click to collapse
Perhaps, but hope dies last
Thanks for voting for México!
Where are you from?
Querétaro!
Only one word to say : french team was "awful"...
Only two things to say: French team was excellent
LauraAmerica said:
Only two things to say: French team was excellent
Click to expand...
Click to collapse
LoL, hopefuly we also kick spain's butt tomorrow
Mr. Clown said:
LoL, hopefuly we also kick spain's butt tomorrow
Click to expand...
Click to collapse
You have all our support, dude
Apple loses iPad lawsuit to tiny Spanish tablet maker
Interestingly, the complaint Apple lodged apparently concerned the same design right that it asserted in its fight against Samsung, winning two injunctions in Germany against the Galaxy Tab 10.1 and the Galaxy Tab 7.7.
Click to expand...
Click to collapse
Seems like Samsung should have hired a better Lawyer in Germany
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.nt-k.com/productos/tableta
the spec are very decent
CPU TI OMAP CORTEX A8
Velocidad 1Ghz
Soporte Juegos 3D/MAP/DYNAMIC PIC.
MEMORIA 512Mb DDR2
NAND FLASH 4GB U 8GB (DEPENDIENDO MODELO) Soporte T-FLASH Maximo 32Gb
WIFI IEEE820.11 B/G/N Wireless
USB Mini USB (OTG)
Conector Estandart USB 2.0
CAMARA Camara Central Delantera 2Mpx
AUDIO 3,5mm Mini Jack - Auriculares
Sonido Estereo CODEC (12S)
2 X Altavoces Internos Estereo
Potencia Reservada Auriculares8Ω 1W
Frecuencia Rango FO~20Khz
PANTALLA Tamaño: 7 Pulgadas
Resolucion: WGA 1024 x 600
Operativa: Panel Capacitativo Multitactil
OTROS Tamaño: 194 x 118 x 15,1 mm
Color: Negro - Frontal/Purpura - Interior
Peso: 370g Bateria Incluida
Bateria Recambiable por el Usuario de 3000Mha de Lithium-Ion
ACCESORIOS 1 x Adaptador de corriente DC 5V 0,35A
1 x Bateria Recambiable de 3000Mha LI-Io
1 x Cargador de Coche ( Solo para el Modelo con GPS y Modelo HDSPA)
hahahaha
awesome
Looks cool
Oh god, Apple sewed them? That side view looks nothing like an iPad.
Thank god they didn't win. That would have literally forced me to pack my bags and leave Earth.
Stop stifling competition, Apple!
Does that thing have a CRT? Looks shaped at the back to contain a CRT.
MartyLK said:
Does that thing have a CRT? Looks shaped at the back to contain a CRT.
Click to expand...
Click to collapse
If any tablet is within 2 inches of the depth of an iPad, Apple will bring criminal charges against you.
Didn't you get that memo?
MartyLK said:
Does that thing have a CRT? Looks shaped at the back to contain a CRT.
Click to expand...
Click to collapse
that's the back of the tablet
AllGamer said:
that's the back of the tablet
-imgsnip-
Click to expand...
Click to collapse
Thanks for adding that extra picture! That shows it off much better. The second picture certainly is an odd angle.
Can Samsung now cite this as case law?
They never won the case, the lawsuit was dismissed.
cobraboy85 said:
hahahaha
awesome
Click to expand...
Click to collapse
You mean JAJAJAJAJAJA!
excelente!
from Reuters: Apple loses tablet case against small Spanish firm
it's pretty solid evidence
Hope they win the lawsuit and get a massive payout from the morons at cappuccino (I know how it's spelt you iTwats). Hopefully the Samsung case follows the same pattern and Samsung wins the appeal and then make crapple pay through the nose for loss of revenue until Steve Jobs rotting corpse turns in his grave.
[TUT]How to disassemble the LG Optimus Black P970
1. We see 7 screw.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. We need to unscrew all.
3. in a visible hole we need to put flat screwdriver and rorate.
4. We are inside phone
5. We need to detach marked parts (ignore polish words, it's not important)
6. Now we undermine motherboard (carefully!)
7. We see phone without motherboard
8. Motherboard from the bottom
9. Motherboard from the top
10. We remove sim and usb slot by undermining with flat screwdriver.
11. We have full disassembled phone
I'm not author of this tutorial. This tutorial was written by Pawel19 from forum.android.com.pl (I asked him for permission) . I only translate this tutorial to english language (sorry for my bad english, but I have hope everyone understand what I and Pawel19 mean).
Video founded on youtube by Irchok (I mean he found), created by dcredi: http://www.youtube.com/watch?v=Ya-1YCkJb7k&feature=colike
Link to original tutorial: http://forum.android.com.pl/f359/instrukcja-demontaa-u-lg-p970-161262/
sorry if i am rude whats the use of this
Many people are searching tutorial how to disassemble p970. On polish forum we have 3 topics with asking about "whare can I find tut how to disassemble p970".
Thanks for the tutorial it's really useful, I just cracked my OB screen and I will try to change it by myself.
Sent from my LG-P970 using XDA
I already done it. I had to replace my cracked glass. The worst part is that it's glued and has some hermetic parts. Be careful to not snatch the earpiece on the top while removing the glass because it is also glued :/
good post
thanks man its good to know how to mange your device in all aspects
even disassembling it
I think step 5 is missing part of the picture
Ilko said:
I already done it. I had to replace my cracked glass. The worst part is that it's glued and has some hermetic parts. Be careful to not snatch the earpiece on the top while removing the glass because it is also glued :/
Click to expand...
Click to collapse
Thanks, j'ai entendu dire qu'il faut acheter du scotch double face pour fixer la dalle tactile, tu pourrais me confirmer cela stp.
Translantion: I've heard that when you change the OB touch screen you got to buy doubled-sided tape to secure the screen, does anybody knows if this is true?
RayTheLion said:
thanks man its good to know how to mange your device in all aspects
even disassembling it
I think step 5 is missing part of the picture
Click to expand...
Click to collapse
No, this is full picture. You need to move the site to right side.
Great tutorial!! Thanks for the translation.
I hope I won't need to open my phone ever, but if the time comes it's good to have a reference point to start from.
Nice to hear it
Irochk said:
Thanks, j'ai entendu dire qu'il faut acheter du scotch double face pour fixer la dalle tactile, tu pourrais me confirmer cela stp.
Translantion: I've heard that when you change the OB touch screen you got to buy doubled-sided tape to secure the screen, does anybody knows if this is true?
Click to expand...
Click to collapse
yes, you may use some double sided adhesive tape, but only for hermetically seal the outline of the LCD screen (see the original one)
For the gluing, I used "Repair Extreme - Resiste A Tout" by Pattex. It's the best suitability, I think.
Unfortunately, it's no more dustproof because I righlty didn't seal the LCD
I have a question regarding this subject:
My OB's screen has been replaced with a replacement screen by technicians of my cellular provider. (because it suddenly stopped working)
Is it sure that the replacement screen is an original part and completely identical to the one that comes with the phone?
Ilko said:
I already done it. I had to replace my cracked glass. The worst part is that it's glued and has some hermetic parts. Be careful to not snatch the earpiece on the top while removing the glass because it is also glued :/
Click to expand...
Click to collapse
I need to replace the earspeaker of my OB ... i figured out, that i have to remove the dsplay to do so. But HOW can i do this?
Digitizer
Hi,
I need to replace the LG P970 digitizer.
Can someone help to disassembly the phone???
PLEASE
You have tutorial? What you still need? If you can't do it yourself you should pay service for it.
Ops.. few images is deleted. I will fix it soon.
schurgatzi said:
I need to replace the earspeaker of my OB ... i figured out, that i have to remove the dsplay to do so. But HOW can i do this?
Click to expand...
Click to collapse
well, I don't remember well but I think you'll have to unsolder it
sorry for the quality, it was shot with my GT540 at low brightness
Ok, I fixed screenshots. Now all should works fine.
Ilko said:
well, I don't remember well but I think you'll have to unsolder it
Click to expand...
Click to collapse
Unsolder the screen? I dont think so
I have disassambled the LG as far as the pictures in the first post show. Thats really easy and for me there was no need for an tutorial.
But to remove the speaker u need access from the backside and from the frontside of the phone. From the backside u have to unsolder the speakercables ( black and red on the left side ) and from the frontside u have to remove the speaker itself.
But to do so, u have to remove the screen first. And thats the point, i need some help.
sorry for the misunderstanding, but your sentence wasn't clear to me.
so, you could do it this way :
warm the part in an oven to weak the glue, then push off the screen on its top by the backside of the chassis
I'm considering this phone but the SD680 performance seems too low so I've been wondering if someone managed to boost it with some custom rom/ other stuff (I know this sounds vague but im not sure if this is even possible or how to do it if it is so I asked here)
I'm aware there's a model with helio G96 but its alot more expensive here
Elixirr said:
I'm considering this phone but the SD680 performance seems too low so I've been wondering if someone managed to boost it with some custom rom/ other stuff (I know this sounds vague but im not sure if this is even possible or how to do it if it is so I asked here)
I'm aware there's a model with helio G96 but its alot more expensive here
Click to expand...
Click to collapse
I've Installed Pixel Experience GSI, now using Pixel Plus UI, and I do see a better performance than MIUI. The ram management is also way better. No app closing after leaving a while or even switching between apps. Maybe the battery drops just tiny bit more than MIUI but hey, the CPU never throttles after a call with these roms
i think we need overclocked kernel
Guan Yu said:
i think we need overclocked kernel
Click to expand...
Click to collapse
Yes but Xiaomi didn't release Note 11 Series kernels yet so im not sure if thats possible, will it improve performance enough tho? Im considering the phone for playing genshin and watching stuff (the amoled screen sounds nice)
Elixirr said:
Yes but Xiaomi didn't release Note 11 Series kernels yet so im not sure if thats possible, will it improve performance enough tho? Im considering the phone for playing genshin and watching stuff (the amoled screen sounds nice)
Click to expand...
Click to collapse
bruhhh ,gpu is fine but genshin is cpu bound game and this phone have really weak single core performance
I bought this for Media watching, because of Amoled, but disappointed. No HDR in netflix or Youtube and Prime. X265 movies Stutter and lag. Only good thing is Social media browsing because of 14 hours of Screen Time.
This phone support hdr but i cant see the difference
Guan Yu said:
This phone support hdr but i cant see the difference
Click to expand...
Click to collapse
The display supports but processor can't handle HDR in 1080p.
Elixirr said:
I'm considering this phone but the SD680 performance seems too low so I've been wondering if someone managed to boost it with some custom rom/ other stuff (I know this sounds vague but im not sure if this is even possible or how to do it if it is so I asked here)
I'm aware there's a model with helio G96 but its alot more expensive here
Click to expand...
Click to collapse
you can disable thermald to prevent stutter but it get very hot
You can root and install cpu tweaker apps like 3C cpu manager and put your cpu clocks to maximum and set governer to performance that would give you some more speed that normal note 11 device but beware it will drain your battery faster and will be mildly hotter than normal stock roms.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VNGriman said:
Instalé Pixel Experience GSI, ahora uso Pixel Plus UI, y veo un mejor rendimiento que MIUI. La gestión de ram también es mucho mejor. No se cierra la aplicación después de salir un rato o incluso cambiar entre aplicaciones. Tal vez la batería baje un poco más que MIUI, pero bueno, la CPU nunca se acelera después de una llamada con estas roms.
Click to expand...
Click to collapse
the change from miui to pixel plus Ui, totally worth it