Hello
I´ve searched the forum for similar problem but havent found anything.
I have installed RealVNC on my Diamond but it cannot connect, get error "Unable to resolve ip by name: (11001)".
But if i start YouTube application and lets it connect, exit youtube then starting RealVNC it works great.
Do i have to allow internet access or something?
Greatful for help /Stefan
it sounds like it could be.
When you start VNC without already being connected to the internet, do you see the arrows moving to show a connection being made?
if not, it seems the VNC application is not initiating a network connection. this would explain why it works after opening youtube.....
Is there any settings in the RealVNC application to specify a connection to use (not used it before, i tend to use logmein)?
If not, you could always go into the com manager and turn the data connection on, before using the program.
There is no options for connection in realvnc and in com manager the dataconnection is "greyed".
When i start youtube and then go to com manager the dataconnection is on, but if i turn it off i cant turn it back on again?
Thanks for helping
so it sounds like realVNC is not initiating the data connection when it is needed.
With the diamond, you should be able to manually connect using the comm manager. the fact that it is greyed out and not switchable is a little disturbing. It sounds almost as if you have the old comm manager where you can only disconnect.
Have you installed any comm managers or done any tweaks? or is it literally out of the box and you just installed VNC?
The phone was completley orignal when i tested.
Yesterday i installed "Ruu_Signed_Duttys_Diamond_5.2.20275_V1_8_Radio_1.00.25.07_Full" and the problem is the same apart from the dataconnection doesent turn of until i turn it off manually.
When its off it says "no data connection exist" in com manager.
Related
Hi everyone,
I love my new MDA device, but there is one thing I miss about my old device. In addition to having a "connect GPRS" link in my WM2003 pocket pc phone (HP iPAQ h6315), there was also a link that said "Turn on Wi-Fi". Now on my current device (MDA), both links are missing when I click on the "G" (or "E") icon. It only says, "To connect to either the Internet or work, set up a new connection in Settings." ... as if I never set up ant connections in the first place.
I can do without the "Turn on Wi-Fi" link though, because I can turn that on by pressing the Comm Manager button, then turning on the Wi-Fi from that screen. I can't however, turn on GPRS using that screen. I have to go into Settings >> Connection >> Manage Existing Connections >> then tap-n-hold on the GPRS connection and tap "Connect".
If anyone knows of any registry tweaks to fix this, or at least a convenient workaround (like the ability to place a shortcut in the Start menu that accomplishes this, etc), that would be great!
I tried downloading RegistryWizard and playing with the GPRS-related settings there, but none of those helped.
My current device is: T-Mobile MDA (USA)
Current ROM: 2.24 custom ROM, found here:
http://forum.xda-developers.com/viewtopic.php?p=304927#304927
open the internet application(eg.PIE) directly and the GPRS will connect automatically .
to disconnect , simply press and hold down the on-hook key for more than 3 seconds.
Thanks, but I am already aware of that... also that I can use the e-mail to connect if I choose the Send/Receive option. But neither method is really that great if I want to make a GPRS connection for a program other than IE or e-mail.
Another method of connecting GPRS manually that would be nice, is in the Comm Manager. The Data Services button there is only enabled if the GPRS connection is already active, then pressing that link will end it. It would be great if that link was always enabled to allow you to connect/disconnect using only that link, much like the Wi-Fi link (also in Comm Manager) operates.
Anyone know how to do that? :wink:
Any have solution . Ihave similar problem like ingersoj.thx
nice query
I do miss that function from windows 2003se
Id love to have a connect gprs button in the same place as the disconnect button in the drop down and for the life of me I cant remember the reg change to accomplish it.
sign me in...
... i would also be interested in having this registry tweak.
i would also like this...
I want to be able to connect to the internet without opening up ie for programs like java gmail, and spb weather...
Sorry guys, but why do you disconnect in first place?
My GPRS connection is always on and I don't have that issue.
This is useful in cases that GPRS is charged. Has anyone found a solution?
Thanks
although you may pay for GPRS, when there are no apps using it, traffic will be 0 and therefor 0 cost. But, I guess battery life will be worse with GPRS on?? opinions?
I'm confused here, I have all kinds of apps which need to connect to internet. All are setup to do this if needed (and start GPRS). Don't know why I need GPRS running if I have no app who's using it.
Please enlighten me..
I am having a problem that when i connect my phone to my work PC my media net 3g quits working.
I have changed the option in advanced connections, server selection, to use media net on both options but i am still getting no 3g/edge etc. Everytime i sync my phone it tries to use my PC connection as the active internet source.
What i want is to have my phone synced but still use my phones 3g internet on the phone and my LAN for my PC.
Can anybody help me figure out why my phone's internet is replaced by my PC's?
Thanks!
Under "Connection Settings" do you have the box checked that says, "Allow wireless connetion on device when connected to the desktop"?
Yes i do. And when i partnered with active sync i selected the option to allow internet calling etc.
It has to be a background issue. Afaik all the options are correct.
After a little further reasearch it appears that when i connect my phone to the computer the proxy server is changed to my work proxy. If i over ride it to the correct cingular proxy it still does not work.
Any help on this? It's getting annoying. It worked fine for a week then just quit working.
I was wondering if there was a way to disable Media Net's automatic connecting whenever I open Internet explorer. I only use wifi for the internet. I disabled it using Kaiser tweak and that worked but then I cannot recieve MMS without MEdia Net enabled. I don't have a problem with it being enabled I just don't want it to automaticly start connecting. If it cant be disabled for everything but mms I would rather have a prompt.
Thanks.
MoDaCo NODATA
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility/
EDIT: I should have read before posting. I'm not sure about the MMS part as I don't use the NODATA program. I was just thinking on the disabling data what I did for my moms phone. Sorry.
I tried that program and it has made it easer to enable/disable MEdia Net, but If there is a way to just make it not automatically connect that would be better. I really hate being charged for the data connection when I don't want to
Has nobody else wanted to get rid of the automatic connecting?
This is the way I disabled the automatic connection on my tilt with stock at&t rom. I don't know if it will work on other kaiser models/ roms since I'm still new with windows mobile (only had the tilt for a couple of months).
go to start>settings> connections tab.
select connections, go to advanced tab.
go to select networks.
On "programs that automatically connect to the internet should connect using:"
I changed it from MEdia NET to My Work Network (since I don't use a work network it is not set up). I also switched the second option to my work network just in case.
Since "my work network" was not set up, whenever internet explorer or any other program tries to connect, it will show a "cannot connect" error unless wifi is already activated. however I can still send/recieve MMS since the MEdia net is not disabled.
If you need to use MEdia net on IE you can just switch the opiton back to media net.
I'm still fairly new to windows mobile and my tilt, and I couldn't find a way to do this after searching for days, so i just kept messing with the connections settings until i found this. This is the first time I got a chance to help someone here so I hope it's what you're looking for!
Thanks a lot, it works great!
So I thought this worked but I relized when I make Media Net not auto connect I cannot send or recieve MMS. Is there a way to only allow messaging to auto connect and then disconnect when done?
um why dont you just go to your connection settings and delete your "my connection" its not hard
If I were to do that then I cannot send/receive MMS. That is the dilemma.
go to connections and switch it to "My ISP" and delete the gprs setting from "My ISP"
Hello.I'm looking for a program which have to stop totally GPRS using.There are many programs which use GPRS by default and GPRS costs me a fortune.Is there a program which turns off GPRS entirely ?
Thank you
Sorry for my english,Im still studying it.
I've found a program,but I can't try it.After I removed WMWiFiRouter everytime when I connect the phone to the PC it recognizes it as Windows Mobile based Internet Sharing Device and ActiveSync can't connect to the phone.And the phone no more shows me the menu to choose if I want to connect to the PC through ActiveSync or (I forgot the other) and it appears Internet Sharing program.Help.
Can tell me how to restore my previous type of connection? Thank you in advance.
There is a program called nodata that will allow you to select and disable your GPRS connection. I haven't used it, but it seems to be pretty popular.
Thank you,but I have this program already,as I have written.I'm looking for a solution of the other problem that I've described previously in the topic.
Edit: I don't know exactly what I've done but I fixed it.
I've the same problem (getting no active sync anymore but internet sharing device) so maybe anybody knows how to solve it?
why don't you guys try kaiser tweak, i believe it's got some options for disabling and enabling gprs and activesync. http://www.jongma.org/KaiserTweak/
I've solved it. on my phone at least: i activated the internet sharing via bluetooth, connected, dosconencted. set it to usb and connected and disconnected again and after that active sync worked again....
but thanks for the tool, i'll try that out, too. (maybe there are some other interesting things, too ;-) )
Connecting and disconnecting worked for me too
For some reason I dont seem to be able to browse web via my mobile browser while device is connected to Activesync (USB cable)
I've checked Allow Wireless Connection and disabled high speed syncing in Conenctions USB>PC on my Xperia.
This affects email and internet data connections and apps. In internet explorer and IRIS I get a 403 error.
I have activesync as "Computer connects to Work Network"
When I disconnect from Activesync I can browse as normal.
Having gone through the usual suspects and done a search I can't seem to find anything that addresses this particular iteration of the 403 error so would gratefully accept any suggest
You don't need the "Allow Wireless Connection when connected to the desktop" ticked. (Unless you want to use WiFi on the X1 while plugged in via ActiveSync).
My ActiveSync "This computer connects to" is set to "The internet", not Work Internet.
Allow USB connections.
On the X1,
Got to Settings, Connections Tab, USB to PC.
Make sure ActiveSync (Sync with outlook) is selected, then make sure "Enable advanced network functionality" it ticked.
cheers for your reply Steve. (good collection of apps too)
These are all options I've tried already (think I've tried every combi) and I end up with the same result - as i get not data connection when i connect the USB. If I open IE or IRIS beforehand and then connect as soon as I browse a new page I get the 403.
I'm sure this didnt happen last time I tried to browse this way but have no idea what could have changed. I thought it could be a connection settings thing - IRIS has loads of options for connections and I've tried all of this, all unsuccessfully. IE doesn't appear to have any options.
Anyone know of any tweaks or reg fixes?
duplicate post
one other thing - if I go to conenction amanger and try to activate Data connection while conencted to activesync, I get sent to the Settings > Connections screen. Data connection will not activate.
I can't offer anymore help Don't know what's up with yours.
cheers anyway steve. gonna wager on a reinstall of activesync and also try on my home pc to see if this is any different.
I know GP can block using device as modem/internet sharing, but this would be different so who knows?
interestingly I've just discovered that I'm still receiving emails when this problem occurs. I wonder if something could be preventing http requests?
just to recap, this works when synced with my home PC, but when synced with my works PC I can't access http via 3g/hsdpa, nor through the PC. I can however receive emails.
As the attachment shows, the phone is connected to the HSDPA and Activesync via USB.
I've reinstalled Activesync on this PC, and experienced an intermittent connection following this - however following this short period of activity the connection halted again.