I have d/l coreplayer, but it's all just a bunch of files. Is it a case of simply transferring them to the diamond whereupon I initiate the installation on the phone itself? If so where do I install to and which files do I need?
Thanks,
S.
you need to transfer the .cab file to the diamond and run it from the file explorer in the phone. If you have ie. WinRAR installed and just went with default settings, the cab. look like an archive like .zip and .rar files and therefore many people think they have to unpack it...
Two ways apps are installed on a PPC.
1. Via a CAB file (filename ends in .cab) by transferring the CAB file to the PPC and "clicking" it within file explorer.
2. Via ActiveSync app installer by running the EXE on your PC. (ActiveSync then transfers the CAB file without you having to do it.)
If you downloaded coreplayer, it should have been only one file (either a CAB file that you run on the PPC or an EXE that you run on the PC).
Related
is there an app for the alpine that lets you extract cab files from exe.files without using a pc
I think most of the .exe actually contain a Win32 installer, so I believe there is no realy way to extract the CAB from it, apart from running it on the PC.
However, most of the time you can get the CAB on the PC and install it without using ActiveSync. The Installer usually extracts the CAB to C:\Program Files\[Name of Software] or C:\Program Files\Microsoft ActiveSync\[Name of Software]. Grab it there and store it on your device, then install with CabInstaller for example.
Cheerio !
If you must go hardcore and decompress a cab on your phone, try it with a RAR decompresor. They open on the PC with winrar, but you'll lose file name & structure.
V
Sometimes the PC .exe file automatically deletes the CAB file from the PC & you won't be able to find it on the PC.
If you have an app that behaves like this, run the .exe on the PC & click on OK/Next until you get to the dialogue that asks you 'Install "AppName" using the default install directory?', just after you see the 'Retrieving Device Data' notification.
Now fire up Windows Explorer on the PC and search your \Program Files\ and \Program Files\Microsoft ActiveSync\ directories for your software developer's name. The CAB files should be inside this folder.
Note: All you need is the CAB file. If there is more than one, make sure you pick the correct Processor type ie .ARM for Himalaya or Alpine, not SH3 or MIPS. You don't need any .ini files either.
I believe most of you will know that some programs like those from Spb runs from windows desktop as an exe file, using activesync, send the cab file over to your pda, runs the cab file.
I find this very troublesome when I need to do a re-install. So I decided to find out, where is the cab file on the pda, so that I can save it for re-installation later.
The folder that cabs are sent to on your pda before the cabs are executed is in the main memory, Windows\AppMgr\Install.
So the trick is, run the installation on your desktop, when your pda ask you where to install the program, click "explore" on your activesync, navigate to Windows\AppMgr\Install in the main memory, copy the cab file there to your storage card. Next, you can continue with the installation process on the pda.
I believe this information would be useful for many people. It would be good if the moderator can put this little piece of infor somewhere that others could refer to.
Similarly, those "desktop .exe" installers leave the .cab PPC installable files in the PC either in \Program File\Microsoft ActiveSync\"developer directory" or \Program Files\"developer directory".
Thanks
Thanks for these valuable information.
You can also extract that cab from the installer files a lot of times too. Use an app such as WinRAR to extract the cab from the executable. I use that method quite frequently as well as hunting in the Activesync folder as mentioned above.
when i install a cab and exe files, i use active sync, extract the file to a folder on my tilt, open it up with my tilt, and boo yah, its installed. not so with zip and xml files. when its either one of these, however i do the same steps as above except when i open it up on my tilt it connects to internet explorer, looks like it "installs", then i get a whole bunch of wording like this:
-<wap.provisioningdoc>
-<charaxteristic
type="install">
etc., etc., etc.
but i NEVER get the program. i see ppl posting opens and loads of various other things in zip and xml format, but i can not obtain these files. What am i doing wrong??
With zip files extract one level only. Normally the zip will extract to either a CAB or an EXE.
Most EXE's you run on the PC with the device AS connected.
CAB files move (unextracted) to the PPC either main or storage card and tap to run on the device.
Sometimes you get a combination of an XML and an EXE (eg Kaiser Tweak) where you move both files to the PPC into a folder and then run the EXE on the device. These are relatively rare - most exe's run on the PC.
If you continue to have problems it is best to give a specific example of the file type and software in question.
Mike
hey guys im really sorry for creating this thread but I downloaded a .arm file to my comp and i synced to my tilt and my tilt wont open the file. how do i open a .arm file on my tilt? sorry for the n00b question. I searched google and no answer so i was hoping my fellow tilt brothers would help out a guy in the process of learning.
As far as I know .arm is not any format native to Windows Mobile / PPC applications.
Generally, when installing software on your device it will come in one of three forrmats:
1) .CAB file - This is like a specially designed zip file which you transfer to your device and run from your device. It contains all the information to install the files in the necessary locations, and generally also creates the proper shortcuts/icons.
2) .EXE file (PPC format) - This is an executable file for your PPC. It will only run on your PPC. If you try to run this from windows you will get an error (something like "not a valid win32 application"). This is what generally gets extracted from the .CAB file aboved and gets placed somewhere on your PPC.
3) .EXE file (Windows format) - This is a normal windows .EXE file and is generally a windows based installer for the program, much like a normal installation program for any Windows PC. When you run it, it often will place a .CAB file onto your device (or into the ActiveSync queue) to be installed. this type of EXE must be run from Windows XP/Vista itself and won't launch on the PPC directly.
If you are downloading a file different from the above from a vendor, they probably also provide instructions. I have not seen any program come in a format other than the above (unless they were also compressed with ZIP or RAR and needeed uncompressing first).
here is what the ext arm could mean
http://filext.com/file-extension/arm
but it could also be that you use some odd filemanager like file explore which dont show the right extentions and the file was called blabla.arm.cab
and explore is hiding the cab
use total commander
That does make sense. A lot of cabs for the arm architecture are called for example netcf.arm.cab. If you aren't using a good file explorer you are not gonna see the file extension. Do your note shoe note.pwi?
Are you sure it's .arm & not .amr? .amr is a media type file.
I find large file extension database here http://www.file-extensions.org
I have a HTC fuze from att and I m trying to install application that have a .cab ext but no respond when I unzip and copy it to my phone. It direct me to the opera website. What shall I do?
I just bought an att HTC and I want to change the today screen and batter meter to %. Everytime i download a .cab file. i tried both zipping it and putting it on the phone and leaving it unzipped and putting it on the phone but everytime i file search for the .cab file it doesnt even show up on my device. How can i do this? thanks for the help!!!!
thanks
.cab installation...
If the cab is zipped (ie. it has .zip / .rar extension), unzip it on your desktop. If you're not sure if the file is actually a .cab file, right click and select 'Properties' - you can then see the actual extension and file type.
Copy the .cab to your device. Place it somewhere obvious, so you can find it easily (ie. the root of Internal Storage). Then on your device, locate the file and tap on it to install it. If it doesn't install this way, it's either not a .cab, or it's not designed for your device