I can't seem to be able to find a satisfactory solution for setting the screen orientation.
Personally I don't really like to use the g-sensor for screen orientation. It doesn't seem sensitive enough and there is that delay before it rotates. Also, when holding the Diamond in my lap or resting on a table, it lies too flat for the sensor to rotate the screen. Actually, even when I hold the diamond straight up and tilt it, Opera doesn't always rotate. Sometimes shaking it a bit does the trick, but not always. Maybe I have a bad g-sensor, but I'd still prefer other solutions.
I think what would suit me best is to have a hardware button to toggle between portrait and landscape. I have tried mapping the call button using tweak 21, but it's not working with all apps, at least not with Opera (build 1938).
I'm curious about bepes Gnes, where you can pre-define screen orientation for different apps. However, AFAIK, Gnes only comes with bepes ROM and there's no CAB. Gnes could work well for me, as I always use apps where I input text (SMS, e-mail, Notes) in landscape to be able to use the wider full qwerty keyboard. Opera is trickier, as I would like to be able to change orientation there.
Are there any other options?
How have you solved this?
First, enable landscape mode using the registry tweak.
Then map the long press call button to landscape as a manual toggle button.
Works well for me.
Riker88 said:
First, enable landscape mode using the registry tweak.
Then map the long press call button to landscape as a manual toggle button.
Works well for me.
Click to expand...
Click to collapse
Problem is, when I use this in Opera, I get to thrown out to the browser tab in TF3D.
Riker88 said:
First, enable landscape mode using the registry tweak.
Then map the long press call button to landscape as a manual toggle button.
Works well for me.
Click to expand...
Click to collapse
Do you mean that this works well for you, even in Opera?
If so, what ROM and what Opera build are you using?
Any input on this would be appreciated.
Related
Is there a way to disable the screen orientation change when you slide the keyboard out on the tilt. I have a hard time using the on screen dialer and like to use the keyboard to dial however there is a good 1-2 second lag between when I slide the keyboard out and when I can start dialing. I'd like to disable the auto orientation and assign it to a button.
Thanks
I am of the same mind - that would be a great. I also prefer to use the hard dialer, and typically keep the screen in landscape so there isn't any of the delay that the change of screen orientation would cause.
I would however prefer to keep it in portrait, but as of yet I have not found a way to do that.
Has anyone discovered how this could be done?
Thanks
Steve
Sorry, my comment is: Wrong direction, you'd better solve this problem, rather than disable the keyboard screen orietation:
belgiebob said:
there is a good 1-2 second lag between when I slide the keyboard out and when I can start dialing.
Click to expand...
Click to collapse
Check here the big sticky!
Hi guys,
I am currently using Gsen to get the SMS and EMAIL screens to display in Landscape mode, this way I find it easier to type using 2 thumbs on the full qwerty keyboard. Unfortunately it's not that good as it often reverts back to portrait and then quits the SMS or EMAIL screen if you happen to move the phone too much.
Therefore I would like to know if there is a regisry key somewhere I could change to get this 2 screens to display in Landscape mode by default.
Thanks.
Look what I found...........
http://forum.xda-developers.com/showpost.php?p=2597546&postcount=8
Thanks, that's pretty close to what I need but it means you lose the use of the 'phone' button. Or does it only work witha long press?
Plus I would really like something which doesn't require any intervention.
But thanks again.
Just a little UP.
I am still struggling when using Gsen as it randomly gets back on portrait mode and kicks me out of the SMS app.
Is there a registry key which says if an app is displayed in landscape or portrait?
Cheers
I've set my Touch Diamond up with the Landscape Manila mod and have installed Flip IT (also tried Gyrator, only Flip IT triggered Landscape Manila) - both work as expected, giving me a nice landscape Today screen and rotating other applications as desired.
One big issue I've hit, though, is that on rotation from portrait to landscape, the keyboard breaks and has to be changed. By default, I use the Compact QWERTY keyboard as I prefer it in portrait mode, but when in landscape mode I would like to (and am forced to anyway) use the Full QWERTY keyboard.
Is there a way to set the keyboard to Full QWERTY when the device goes into landscape mode and Compact QWERTY when it goes into portrait mode? I had no luck with searching the entire Diamond forum.
Thanks,
Nick
P.S. For reference, I'm running A.Z.T.O.R. V7 WWE ROM.
Although it's developed for other purposes, PQzII works very well.
Thanks for the tip Obsidian, but I'm not sure I understand how this will fix the issue. It sounds like you've got it working as desired, can you give me any tips on how to set it up properly for the purpose described above?
Thanks,
Nick
It works pretty much as it is described here:
After you start the programm you see a white square in your taskbar
If you press and hold it, you'll be able to configure the settings (which icon to use and many more)
Right on the first tab "CTRL/ALT" you'll be able to choose a SIP for portrait (Port) and another one for landscape (Land)
Hit ok and you're done. The change takes a little time, so be patient.
Ah, I see, so it's still a manual solution. As it stands right now, I can use the keyboard softkey to switch successfully.
Mainly, I'm looking for a way to have the keyboards seamlessly switch when the mode changes, like on the iPhone. I wouldn't mind so much about switching actual keyboards (i.e. Compact QWERTY to Full QWERTY) physically if they would just remain displayed after the switch; right now, on switching modes, the keyboard disappears completely.
Any other ideas out there?
Thanks,
Nick
I would also like this feature as I am used to typing in the Compact Qwerty, when I switch to landscape the Compact Qwerty option disappears. Perhaps there is a registry tweak to enable it?
does anyone know of a way to disable the annoying soft keyboard popup when you are in landscape mode and have the hard keyboard out? i saw an old thread about this but wondered if any concrete solution had been found for the Raphael.
thanks!
take a look at blownfuze.org (pass/user xda/xda).
there is a nullkeyboard.
install it and select as input method, that should fix the problem
Thanks for the response... that does work; however, it isn't exactly a "smart" solution because the setting doesn't rely on the current mode (portrait versus landscape), so when you close the keyboard and switch to portrait, it does not switch out the null keyboard for a working keyboard.
not that I do a lot of typing in the portrait mode...but would be nice to have both options
thanks anyway (and I'm using that for now)
-ben
Just a simple question if anyone is willing to help
How do I keep my phone on landscape all the time?
I have tried going to "settings -> align screen -> landscape" but everytime i close my keyboard goes back to portrait mode . Some say it's due to "clear type" i turned that off and still keeps going back to portrait [I do lot of texting]
So if anyone has any ideas and would like to pass on plz 'n thanks
If you rotate the screen in closed-keyboard(portrait) to landscape,it keeps all the time in LS mode all the time after(keyboard in/out doesn't matter).. You can do it using mortscript,SPB PocketPlus or in a different way.
I have got a opera mobile 9.7 beta and when you rotate screen on landscape with this software and press home button, your screen will be still on landscape
// It is some BUG of opera, but you can use it
TomasNM said:
If you rotate the screen in closed-keyboard(portrait) to landscape,it keeps all the time in LS mode all the time after(keyboard in/out doesn't matter).. You can do it using mortscript,SPB PocketPlus or in a different way.
Click to expand...
Click to collapse
sweetz I will try to get this to work! [by using PPuls most likely] but which one would u suggest!!?
AdamiX said:
I have got a opera mobile 9.7 beta and when you rotate screen on landscape with this software and press home button, your screen will be still on landscape
// It is some BUG of opera, but you can use it
Click to expand...
Click to collapse
I tried it does not work on mine lol but thanks
And also i found program called GSen ot rotates your touch pro !
If you have sk tools (probably even the free version), use the shortcut manager to create a landscape mode shortcut, then copy it into \windows\startup. You should be good to go.
Farmer Ted said:
If you have sk tools (probably even the free version), use the shortcut manager to create a landscape mode shortcut, then copy it into \windows\startup. You should be good to go.
Click to expand...
Click to collapse
I will give this a try thanks bud
In changeScreen you have the choise which orientation you want to use by default. And you can make exceptions. For example, I hate it when bubble breaker starts a new game when I tilt my phone to far, so I've set it up in a way it only uses portrait.
Scalage said:
In changeScreen you have the choise which orientation you want to use by default. And you can make exceptions. For example, I hate it when bubble breaker starts a new game when I tilt my phone to far, so I've set it up in a way it only uses portrait.
Click to expand...
Click to collapse
nope I am running rom that are tf3d2 and I m wanting to the screen on landscape all the time, instead when i close the keyboad going back to portrait? tried everything so far no luck
amitb101 said:
nope I am running rom that are tf3d2 and I m wanting to the screen on landscape all the time, instead when i close the keyboad going back to portrait? tried everything so far no luck
Click to expand...
Click to collapse
hehe im trying to do the exact opposite
I want tf3d to be in portrait all the time, regardless of keyboard in or out.
If i figure out how, ill let you know because it should be easy then to convert to landscape only.
xternal said:
hehe im trying to do the exact opposite
I want tf3d to be in portrait all the time, regardless of keyboard in or out.
If i figure out how, ill let you know because it should be easy then to convert to landscape only.
Click to expand...
Click to collapse
any luck bud?
Nope sorry
I had another thread going and their were a few suggestons but it didnt make any difference.
why not just use screenchanger 2.8 and set default only 2 the landscape of your choice (dont know if ur right or left handed)???
if u chose "enable" and "run on startup" wouldnt that fix everything w/o out using some stupid glich?
all the programs that i have used like gsen etc, dont override the keyboard slide. It seems to have some hardwired switch which overrides all of those programs and forces landscape, and then back to portrait when you slide it back in.