How to lock my phone - Touch Diamond, MDA Compact IV General

I phoned a friend last night at 1am - accidently. All I did was put my Diamond in its case and it dialed out.
What do you do to get around this? Lock it? How? I've also heard that locked devices unlock on an incoming call?
Thanks,
Jon

Try pressing the standby-button on the top of your phone. This should turn your screen black and make the touchscreen unresponsive.
edit: you could also longpress the "End Call"-key so you cant press any button accidently

Related

Brightness after phone call / key unlock issues

Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
mrbofus said:
Hello everyone. I have an AT&T Tilt, and it's great so far, except for two issues:
1) After I end a phone call, the backlight seems to go off and the screen is very dim. Pressing keys does not bring the backlight back. If I power the screen off and on, the backlight comes back on and the screen is at its normal brightness.
2) I lock my AT&T Tilt using the "Device unlocked" area on my home screen, and when I unlock the phone, sometimes it asks for my PIN, and sometimes it just shows the unlock button on the screen. My settings are for a 12 hour timeout.
If anyone can shed any light on possible fixes to these issues, that would be great. Thanks!
Click to expand...
Click to collapse
I have the same issue after a phone call....
Same issue here too... it doesn't happen when on USB-power... and I don't remember it doing this before the security-Exchange policy was forced onto my phone.
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
I think this happens coz the phone goes into standby / lock mode during your phone call. Just press the on/off button to turn screen off, and press again to turn on. Now your phone will be responsive again.
Minor bug.
Or you can just scroll the volume wheel to turn it back on.
michi123 said:
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
Click to expand...
Click to collapse
thanks michi
thanks everyone for your replies. I will try the StayUnlock application.
I still don't understand my second issue though. If the bug is causing this issue, shouldn't it at least be consistent in either requiring me to type in my PIN or just hit the unlock button? I have set my phone to lock after 12 hours, so it should never ask for my PIN, just the unlock button...
I now see that people have been having the first issue since the Cingular 8125 but I have been unable to find any references to my second issue.
ATT Til and Backlight
When making a phone call, once connected, about 12 seconds later the screen goes dark regardless of the setting on the backlight. I am not using a password, and the only way to get back is to use the power button. using the phone button puts the call on hold

Accidently ending calls

Hey, I'm having some technical problems with my TyTN/Kaiser. Most times I'm in a voice call I will have the phone against my cheek like all people do, but the problem is that when I move around slighty or whatever the end button is being pressed on the touch screen by my cheek.
This is so annoying and I've read through the manual and couldn't find anything to disable touch screen in a call, so now I come to you folk
Is there any way to lock touch screen only (not buttons) in a call?
A_Cs S2U2 has some of this functionality.
My Tilt allows me to do a quick-press of the power button while on a call. That turns off my screen, but still allows me to end a call with the "hard" end button.
you could use advance config/kaiser tweak to enable fast sleep when in call that turns the screen off while still keeping it unlocked so the buttons work after a few seconds..... otherwise press the power button quickly as soon as you have made the call/answered the phone
_DrG_ said:
you could use advance config/kaiser tweak to enable fast sleep when in call that turns the screen off while still keeping it unlocked so the buttons work after a few seconds..... otherwise press the power button quickly as soon as you have made the call/answered the phone
Click to expand...
Click to collapse
Cool, this sounds alright, but when you say turns the screen off but keeps it unlocked, does that mean the end button is still pressable on the screen?
I can't believe nobody has this problem.. happens to me almost every call.
deXtrous said:
Cool, this sounds alright, but when you say turns the screen off but keeps it unlocked, does that mean the end button is still pressable on the screen?
I can't believe nobody has this problem.. happens to me almost every call.
Click to expand...
Click to collapse
When the screen goes off, either by time-out or quick press of the power button, the screen "buttons" are not enabled.
You can end the call with the red end button. Or, if you prefer... another quick press of the power button to "wake up" the screen, and you can use the soft buttons again.
gavink said:
When the screen goes off, either by time-out or quick press of the power button, the screen "buttons" are not enabled.
You can end the call with the red end button. Or, if you prefer... another quick press of the power button to "wake up" the screen, and you can use the soft buttons again.
Click to expand...
Click to collapse
Cheers! that's what I wanted to hear.
Thanks everyone else to, I think this is a wrap
deXtrous said:
I can't believe nobody has this problem.. happens to me almost every call.
Click to expand...
Click to collapse
No, I had it happen frequently in my first few weeks of ownership, but it's not happening of late. I don't know what I'm doing different, but it was a real pain.

Key lock even when the phone is ring

Hi,
I usually put my phone in my bag. When the phone is ringing, Many times I mistakenly hit the hang-up button (the red phone key) while I was trying to take the phone out of my bag. Is there any setting or tweak or software to lock the keys while the phone is ringing?
Thanks.
Hi !
Have you tried S2U2 ?
http://forum.xda-developers.com/showthread.php?t=412418
Hope this helps...
Cheers

Diamond unlocks itself, hardware problem?

Basically I had a look about here and can't see anyone else with the same issue.
I've not long had the phone and the other night I had a call quite late saying I'd been phoning them 5 times. I'd locked my phone but when I looked at it it was awake and unlocked.
I can lock my phone (hold down the end call key) but with a bit of movement to the phone it brings up the unlock screen and unlocks itself.
This also happens if I lock the phone and turn off the screen with the power button. After a little shake about the phone will turn on and unlock itself.
You can imagine the problems this can cause whilst in my pocket.
I've not messed with the firmware yet or even any registry entries, it's as it was from HTC.
I am having this same issue with mine. I hold down the End key for a few seconds to lock, it locks successfully, but if I move my finger a bit and touch any other part of the surface it unlocks almost instantly. Sometimes the lock remains, but it's more likely that it will get unlocked.
I tried using TouchLockPro, but that didn't seem to help me much (it seems like it's not even functioning, actually). I'm running A.Z.T.O.R. V7 WWE ROM.
Nick
Have you tried going to settings then hitting "key lock". On the screen that comes up check the first option "lock all buttons except power button".
Works fine for me - when I switch off screen using power button everything is locked (buttons and screen) until I hit power button again or I get an incoming call.
Mine is set to that, but it doesn't seem to have much effect.
Sometimes I will hit the power button to shut the screen off and later when I pull it out of my pocket the screen is on and something (e.g. Calendar, System Time, etc) is open. During the period it was in my pocket I received no calls or texts.
When I try to hold the end key to lock the phone, it will lock it for ~1 second and then automatically unlock it. Doing it a second or third time will usually get a lock that "sticks" (at least for a while).
There has to be a good solution for this out there, but I've tried PocketShield and TouchLockPro without luck.
Nick
Diamond unlocks itself
I have this problem as well. I went to a meeting, locked my phone and it made 20 calls to my friend abroad, so I am really pissed, it happened before but I thought it was because it got knocked in my handbag.- Please help
Also my battery life has depreciated in a big way, at first 24 hours , 4 months later I'm lucky if it's lasting 6 hours and that's without making a call. I've turned of wi-fi, 3G etc. What is happening
Use sensorlock its great if you set it to unlock when you take the stylus out and relock when u slide it back in
mancsoulja said:
Use sensorlock its great if you set it to unlock when you take the stylus out and relock when u slide it back in
Click to expand...
Click to collapse
TouchLockPro should just work. In post #5 alternatives are mentioned (and also why the built-in Windows Mobile lock is not a solution for your problem)!

its hard to answer calls on hd7 when phone is acting up

hey guys sometime when i get and incoming call my phone start acting up and i cant slide up to take the call, my screen wont respond and no hard keys to press if some one know how to fix this please let me know if not im giving this wp7 a 2nd software update a chace to get this right. ms should be a genieus when it comes to software not apple or google. you never know when a emergency call comes in and you could not get it, im so concern about this. i had enough with 6.5 now this. but the problem is that i love ms i keep coming back. ****tttt
if a soft reset doesn't fix it you could hard reset. Just make sure you make a list of installed apps to make sure you get them all back on there.
I hadn't heard of this happening before.
I had the same problem once. I just switched the display off and on again (while the phone was still ringing) and then I could take the call.
chr5s11 said:
I had the same problem once. I just switched the display off and on again (while the phone was still ringing) and then I could take the call.
Click to expand...
Click to collapse
+1 this happens from time to time.
hit the POWER button to shut of screen, this just powers of the sound and display and does not efect the incoming call.
Press the POWER button to turn the screen back on where you still see the incoming call and the screen will now respond correctly allowing you to answer.
no need to rest or anything.
xma1e said:
+1 this happens from time to time.
hit the POWER button to shut of screen, this just powers of the sound and display and does not efect the incoming call.
Press the POWER button to turn the screen back on where you still see the incoming call and the screen will now respond correctly allowing you to answer.
no need to rest or anything.
Click to expand...
Click to collapse
+1 Me too.
Is there any remedy to this issue???, i'm having the same thing

Categories

Resources