Related
I don't seem to be able to hard reset my SPV M2000!!!
I press:
-Power+Reset
-Camera and Record to get the Boot Options
-Select NO, Yes, Yes
All of this works fine, but I can't go on from there - no button press will get it to finish the hard reset (and, YES! I DID try the 'Mail' button, nothing happens!)
Any I deas?
I've upgraded to WM6 (after first downgrading to WM2003 from WM5 - same problem occured when I tried this, too!) an I have a load of the programs I installed in WM5 trying to load at startup! I also want to get rid of the Extended ROM.
Any help you guys could give? I'd be eternally grateful!
Bird
Workaround
Sort of found a workaround(ish):
As I hadn't already changed the EXTROM, then all I had to do was to install the latest official ROM from the Orange UK site. That wiped the old crap I had on my BA, then resized the EXTROM and installed WM6.
Would still love to know if anyone knows/finds a proper fix! Just in case I want to change the ROM at a later date.
Bird
Full Solution
Not tried this - don't need to at the moment -
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
But it looks like the solution to the problem - found it by ... reading the Wiki !DOH!
Bird
Some days ago, i've flashed my phone to get an "up-to-date" ROM. I chose "PDACornerIllusion 21139" of 2009.03.06. All went fine excepting the keyboard of my GPS wont work anymore (dunno why of course), so i re-flashed with another ROM.
I was surprised that my phone kept the CornerIllusion BootScreen, but i didnt care.
All of a sudden, after having soft reset the ROM i chose (the 2nd one), for an installation of some proggie. The ROM restart as brand new asking me to reset the screen, the clock, date etc... losing all my content and customizations. Then i couldnt sync with Outlook after the first sync i've done minutes ago (error code 800004005). I've decided to soft-reset the phone, and now, TF3D wont even start, (it selft tries to start several times, then gives up), AND the programs lists is all broken, no shortcuts left and the games folder is named *h1/4Eg+รง^, nothing works anymore.
I flashed with about 4 roms (including Aztor one), resulting in the same mess.
Does it have something to do with the first one "PDACornerIllusion 21139" and its still remaining BootScreen?
Can i flash my phone from its roots, to get rid of this ?
As it's maybe not the "fault" of PDACornerIllusion, i write this in this section of the Diamond general thread and made a double post at PDACornerIllusion development thread
I suggest you perform a hard reset before flashing any new rom and that you use the traditional "flash-from-PC-using-ActiveSync-connection" method to flash.
And above all I wish you luck!
What was the other ROM you flashed? I am curious.
rondol1 suggests you hard reset prior to flashing a new rom. I suggest you hard reset after flashing a new rom. Net result is probaby much the same. You could even just do a hard reset now with whatever is loaded and things will probably improve. Main thing is...whenever you flash a rom do a hard reset straight after loading it. I always do this religiously and with the exception of one recent rom I tried I have never had a problem.
First of all, thank you both for trying to suggest hints, i really appreciate it.
I've never hard reset the ROM before or after having installed a new one. I never have a problem before.
For the last 2 months, i was on NEON 1.28, then i've decided it was time to update seeing the new features of the more up-to-date ROMs
I've just reflashed it (an hour ago) with PDACornerIllusion 21139, i've hard reseted before and after. let's see how it turns out ....
I've tried NATALY, CLOUDY, MORNA & AZTOR, no luck with any of them, all died after a soft reset or after the 1st sync (reconnecting for a 2nd sync).
Maybe the problem comes from the very root of the phone (like BIOS in a PC, dunno), maybe something in there got corrupted. How to repair it if my guess exists and is it repairable?
dunnno said:
I've never hard reset the ROM before or after having installed a new one.
Click to expand...
Click to collapse
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
logger said:
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
Click to expand...
Click to collapse
completely agree with logger - hard reset after you flash any ROM. I haven't used PDACorner - so can't say for sure... but do the flash via CustomRUU once... when the new ROM is flashed... do a hard reset as soon as it's complete..
good luck!
let's see then, >>>>crossing fingers<<<<
I've had this happen a lot lately as well. Might have something to do with the newer SYS? Anyway, hard reseting hasn't always fixed it for me. However, flashing back to the Sprint stock ROM (or HTC stock for you GSM guys) then flashing a new custom ROM has always done the trick. Maybe because the stock ROMs are bigger and "clean" out the memory somehow? At any rate, flash stock and then you're good to go. No permanent damage.
no luck, after a 2nd soft-reset, the phone is asking "touch the screen to configure for the 1sy use blablabla", all data's lost again & again...
what do you mean by stock Rom ? the rom that came with my phone when i've bought it ?
I've got the same problem with the Diamond rebooting like a hard-reset. But I always did a hard-reset after a fresh install. I blamed it on the rom and tried several others, including donsalari's "Clean Basic Rom", the Gen.Y Sense 2.1 and 2.5 versions and an older Aztor rom. Same problem every time, the first reboot after changing the device locale works fine, then I set the whole phone up properly and on the next reboot it will come up as if had performed a hard reset.
Additionally, the file system on my internal storage got corrupted somehow, had to reformat. At some point, I also had the impression that data on the phone memory got lost gradually. First the Contact's numbers got replaced by some nonsense characters, then there were numbers and contacts missing, and finally I had no contacts at all. ActiveSync stopped working so I was in the middle of a trip without my phonebook...
I've got two hypotheses:
1) The Gen.Y bootloader messed with the phone (Had tried the Sense 2.5 Gen.Y rom before donsalari's)
2) Flash controller or Flash itself is broken
@dunnno: I suggest you rename the thread to something like "diamond hard-resets on 2nd reboot after rom install"
edit: oops, just realised I resurrected a very old thread... Maybe there's a fix already?
My diamond still suffers from this problem. I tried it again and again with different roms but everytime, at some point all my configuration is lost and the diamond reboots like after a fresh install. Can anyone please help?
I'm having this problem as well :|
Grr, I have to rely on my phone for so much, but it just doesn't want to work correctly.
Help is immensely appreciated.
Well, I got mine to work, I just flashed the stock HTC ROM and everything has gone back to normal. H3PO, I suggest you give that a shot if you are still having problems.
I had these problems when I first started flashing my Diamond with custom roms.
Now I always flash my carrier stock rom first, then hard reset, then flash custom rom, then hard reset and I never have any problems. I have no idea why flashing the stock rom first stops the problems but I haven't had any problems with the dozens of roms I've flashed using this method.
Also I always flash from internal storage, but others prefer using MTTY
I still have some problems with the Contact Database, but flashing some stock O2 Rom solved the "reboot as new" problem.
Hello,
I installed a cooked ROM a week ago. After a day or two I switched the phone off and when I switched it on it froze on the Touch Diamond boot screen indicating the versions.
I did a hard reset. It worked fine but after installing some ROM fixes (provided in the ROM thread) after rebooting it got stuck again.
Finally, I attempted to install a new rom, everything went fine until rebooting from the customization screen that resulted to the same problem..
Is my device problematic?
PS: Before installing the new ROM i had another cooked rom installed that worked perfectly.
I removed the SIM card, managed to boot the phone and I got an error "@[]@[]M[]@ cannot be opened . Either it is not signed with a trusted certificate or one of its components cannot be found." ([] = unprintable character)
I have the same problem, only with my htc hd2.
Was running a slightly modified close to stock rom wwe, without problem (except the occasional freeze every other day) however, after attempting to install another room with cookie's homepage customizer, my phone keept freezing after about 5 min after the customization screen.
I thought this had something to do with the apps I installed just after the rom installation process. However, after some testing the same problem occur regardless if I install just the rom.
Have also tried upgrading to another newer version rom & radio yet I encounter the same issue all the time; The screen will freeze and otherwise become non - responsive after a restart the phone may not start ( freezing on windows orange screen), or it will start the customization process anew, somehow resetting all settings and stored content. .
Is my phone messed up for good? What are my options, please help!
Cheers,
Nate.
The first time is always the hardest.
Recently I've been playing with the registry to try and lower the 'lowest volume' setting for my headset with no success. Apparently I need to change the audiopara file. I'm thinking that changing the ROM may help. So here's a few questions:
1 - If I decide to go back I can download my original ROM from here (Generic Australia R3AA013 Software Update)?
2 - Do you reckon Christians 6.5 ROM is pretty good? Do you recommend changing ROM?
3 - Does each ROM come with it's own registry etc or do they rely on stuff on the phone (does flashing the ROM remove everything?).
Thanks!
.... sorry can't post links. Feel free to recommend a good 6.5 ROM.
'Tron said:
The first time is always the hardest.
Recently I've been playing with the registry to try and lower the 'lowest volume' setting for my headset with no success. Apparently I need to change the audiopara file. I'm thinking that changing the ROM may help. So here's a few questions:
1 - If I decide to go back I can download my original ROM from here (Generic Australia R3AA013 Software Update)?
2 - Do you reckon Christians 6.5 ROM is pretty good? Do you recommend changing ROM?
3 - Does each ROM come with it's own registry etc or do they rely on stuff on the phone (does flashing the ROM remove everything?).
Thanks!
.... sorry can't post links. Feel free to recommend a good 6.5 ROM.
Click to expand...
Click to collapse
1 yes
2 best find out for yourself; the earlier the better
3 yes and no; no, the rom is replaced and most probably rilphone.dll, but radio and spl are normally untouched
cheers
Hey guys. I just got my x1 back from repairs (they fixed the nasty crack for free XD) and wanted to know if I can Hardspl again. When I put the stockspl, the page said that dont bother using this if you are gonna put hardspl back. But I had to for warranty reasons.
Anyway...can i just flash hardspl again?
Thanks in advance
T
redlite said:
Anyway...can i just flash hardspl again?
Thanks in advance
T
Click to expand...
Click to collapse
I did that 2/3 time without problem.
DrakenKorin said:
1 yes
2 best find out for yourself; the earlier the better
3 yes and no; no, the rom is replaced and most probably rilphone.dll, but radio and spl are normally untouched
cheers
Click to expand...
Click to collapse
1 - Sweet.
2 - Changing the ROM takes a bit of effort just wanna be sure it's a good move.
3 - Okay - what is the radio and spl?
Cheers.
That Energy ROM looks pretty sweet. May go for that one.
Another Question;
The 'NEW ORIGINAL X1 and X2 ROMS update 3.2.2010' thread lists all the original ROMS (in my case Generic Australia R3AA013 Software Update).
forum.xda-developers.com/showthread.php?t=475482
So could I restore my X1 to it's original ROM by downloading from the Link above?
Why would you choose to take the time to back-up your ROM if you can just download the original?
'Tron said:
The 'NEW ORIGINAL X1 and X2 ROMS update 3.2.2010' thread lists all the original ROMS (in my case Generic Australia R3AA013 Software Update).
forum.xda-developers.com/showthread.php?t=475482
So could I restore my X1 to it's original ROM by downloading from the Link above?
Why would you choose to take the time to back-up your ROM if you can just download the original?
Click to expand...
Click to collapse
1. Yes.
2. Some people flash their phones 2-3 times a day, so it's good to have something to fall back onto where everything is setup the way you want to. That being said, I don't back up my ROM, I just do a clean install every time I reflash.
harveydent said:
1. Yes.
2. Some people flash their phones 2-3 times a day, so it's good to have something to fall back onto where everything is setup the way you want to. That being said, I don't back up my ROM, I just do a clean install every time I reflash.
Click to expand...
Click to collapse
Cool, thx.
When you do a hard-reset, which I've done recently, that take your phone back to square one. So I guess what I'm trying to work out is if it's necessary to back-up the ROM. Basically I'm being lazy.
I've downloaded two ROMs to try - Christian's ROM and Firestone V6.1.
HELP:!!! my x1i phone not running
lastly , i 've installed a language supporting program , then i restart the x1i but it did not boot again , it just reach to sonyericsson logo and still there .... i've tried hard_spl and all of these stuffs one by one. but when it connect to the device -as i remember the third step- it shows the the current verion: -it does not show any thing here- and the next version , 1.00.x or something like this.
when i clicked the next button i show the progress bar on each of tow (pc and x1i) and then stay on 0% for about 3 min then it show the recovery wizard , some time it said that "lost connection" others nothing but recovery... x1i here still showing the progress bar as 0% , so i remove the battery or soft reset to go into the recovery wizard , then i shows successfull recovery ... but i don't see any respond on the x1i , it's the same status , no boot no ability to update or or ...
when i connect the x1 and go to boot loader(manually known buttons) the Win XP (mine on pc SP2) show new device and good install driver and successfull driver installion on the first time and then just shows the sound of plug in the device or plug out...;
sorry if i said too much here . just i want to make it shown to all.
thanks for all who will mention even "i 'll try to ask for you"
good to be here
'Tron said:
Cool, thx.
When you do a hard-reset, which I've done recently, that take your phone back to square one. So I guess what I'm trying to work out is if it's necessary to back-up the ROM. Basically I'm being lazy.
I've downloaded two ROMs to try - Christian's ROM and Firestone V6.1.
Click to expand...
Click to collapse
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
DrakenKorin said:
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
Click to expand...
Click to collapse
I've my person data sorted. All my contacts are stored in Windows Live - so all I need is the Windows Live app to retrieve my contacts.
I use online sync for my calendars - so no problem there. Don't care if I lose my SMS messages.
I've copied across any pictures.
I store all the .cabs for my favourite apps on my SD card.
I made some changes to the registry to try and adjust the headset volume but to no success.
So probably don't need to pack up my Rom.
I like the look of Spike's X1.5 ROM.
'Tron said:
I've my person data sorted. All my contacts are stored in Windows Live - so all I need is the Windows Live app to retrieve my contacts.
I use online sync for my calendars - so no problem there. Don't care if I lose my SMS messages.
I've copied across any pictures.
I store all the .cabs for my favourite apps on my SD card.
I made some changes to the registry to try and adjust the headset volume but to no success.
So probably don't need to pack up my Rom.
I like the look of Spike's X1.5 ROM.
Click to expand...
Click to collapse
sounds reasonable so far
you can use apps to automatize (to a degree) the restoring of personal settings/apps/progs/data/...
e.g. with user customization (UC) or sashimi
that's especially useful when often flashing an update of the already installed rom, as menu structure and general reg layout is similar (expect for certain update)
that way you can easily get most of your customization done without major effort (except of course for the one time you need to config your uc tool), right after flashing, some roms even check for uc configuration during rom customization process
about the reg edit: did the adjustment not work or the export of the changed setting?
yes i did it
DrakenKorin said:
I would advice on backing up your personal things: contacts, mail, messages, some settings if you want (like hw keybd layout...)
to back-up a rom is only useful if you change reg settings often and want to have a backup in case of system crash/failure
as you intend to change your rom once in a while a backup of one specific rom doesn't make sense you see? preserve your personal data, that does it
pim, sprite, spb, synch, myphone, ... there are many ways, read about them and decide for yourself
@truthglow did you try with your sd card taken out?
Click to expand...
Click to collapse
many thanks for you DarkenKorin...
when i use the micro sd way it stays on "loading ... " and don't gives any thing else...this thing with many roms and many pcs-but on xp- .
yesterday i got window7 and tried to connect my x1 , and the same thing become... but my pc was with no mtty ... and the microsoft active sync was not able to install on Seven...
so today i've got the mtty and i'll try after install it.
if it worked i will notify you surly.
thanks again...
and if anyone knows how to solve i thank him.
DrakenKorin said:
about the reg edit: did the adjustment not work or the export of the changed setting?
Click to expand...
Click to collapse
^ I edited the registry in an attempt to decrease the headset minimum volume (I found the minimum volume too loud for in call & listening to the radio).
I have since learnt that I need to change the audiopara file. But I don't have the expertise. So I'm hoping my new 6.5 ROM's headset volume is a little quieter .
Edit: We now have a whole Q&A Forum...
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Scabes24 said:
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Click to expand...
Click to collapse
Basically,the only clean restore would be the same ROM to the same ROM, minus PIM data.
Let's say you're running Dutty HG15 23569 and he releases HG 16 23569 with fixes, whether registry, programs whatever, you would end up restoring over the changes.
With Manila, even if you back up your own ROM and restore, its not a good idea to restore your PIM data back to Manila as its been known to cause it to crash. However PIM backup works well for this.
I'm not saying it 'won't' work, but it 'can' cause issues.
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Use pim backup!!!
you better off using PIM backup and you wont screw it up...Use mortscript to create a script to install the files you need on first boot...(XDA-UC is written in Mortscript.). Just make .reg files, .cabs and what ever else you need , edit XDA-UC to your needs and you are ready to go!
Scabes24 said:
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Click to expand...
Click to collapse
Force upgrade is for different ROM builds. I wouldn't use it.
I use a combination depending on what I am restoring.
For same ROM restoring, I use SPB Backup with PIM disabled, and Google sync (gmail as exchange server) for contacts, e-mail and calendar.
For different ROMs, I only restore Gmail, my exported registries such as my sound settings, owner info, and various other tweaks I apply and databases.
Naturally any program specific settings would be fine.
As far as registries and system files, you could be restoring something that's incompatible or an older version.
Sashimi and User Config are 2 alternatives for auto installing your stuff.
Hope this helps.
Yeah I use XDA_UC with very few configs cuz I'm never sure if certain stuff will restore correctly. I seem to have trouble with settings exporter.
How do I restore specific program configs (bsbtweaks, advanced config, Tabs) without using the UC exporter or a full restore? Can I do it with SPB?
Because I like UC but just for CABs and PIMrestore (sometimes CHTedits)..
Sorry for all the Q's, I've been flashin a lot lately and always end up doin manual config labor and soft reseting a million times. But thanks a lot for the help!
I should note that the reason I don't use the Exporter is because I used it a bit before and when I would import the settings the bottom row of quicklinks would be all mangled and everything seemed glitchy. does this mean I was doing something wrong? I'm not sure but I think I remember NRGZ28 mentioning something in the changelog about an update/fix for UC so maybe I just need to try again.
How can I tell which Hard SPL / Factory SPL I have?
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
snailspeeder said:
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
Click to expand...
Click to collapse
It should say
SPL-2.51.OliNex or 1.83.OliNex
And it depends on the error you encountered. Did you try the upgrade already?
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
snailspeeder said:
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
Click to expand...
Click to collapse
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
SPL-1.83.0000 is the stock SPL I'm pretty sure by the way
Scabes24 said:
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
Click to expand...
Click to collapse
I tried again following their "automatic flash" but then I got the error of the server being down or something. I will try again. I have flashed ROMs on other phones, but this one is giving me a bit of a problem. I also tried the Manual version, but it didn't put the phone in the bootloader mode, it kinda just stood there.
So you followed the directions like they posted? Any other hints or tips? I installed the enablerapinew too.
EDIT:
I figured it out, I am such an idiot. Thanks for your help. After installing the enable I did a soft reset. That was what I did not do. Thanks. Any recommendation on a stable ROM? I am looking at Nhathoa's
Nice, yeah NhatHoa is good. I've been using the Energy ROMs.. close-to-stock and fully loaded versions available.
begin with htc pure rom install
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Check out this thread first, it is the pre-guide to learn the basic:
forum.xda-developers.com/showthread.php?t=585457[/url]
knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Do you have Hard-SPL already?
Can't get sms dialog to automatically rotate to landscape mode
Hmm, I'm still not sure if this is the right thread to ask a general, non-rom-development topaz question... It says so in the first post, but the thread is located in the rom development section - strange...
Anyway, I'll try: I'm using the latest cookie sense 2.5 energy rom for my diamond2, but the problem existed on all previous (energy) rom versions - whatever I try to add to the touch tools' rotation manager (or g-config), I can't get the sms writing dialog (htc "threaded" or "normal" version) to automatically rotate to landscape mode when I turn my phone. Nothing happens... I have a default hard button assigned for doing that and that works flawlessly. Other apps added to g-config rotate automatically...
I'm desperate, anyone willing to help? Is there some setting I have to enable or some registry tweak to apply or something? I searched the forum but users don't seem to have any problems with that, so I must be doing something wrong...
Thanks!
About the Touch diamond 2 Resitive touch screen problems ^^; , My Lovely diamond 2 if there cold , My diamond 2 automatically Touch in the center .. , Can you help me ?