Related
http://cgi.ebay.com/Leather-Carrying-Case-for-HTC-Advantage-X7500-X7501-New_W0QQitemZ180231674522QQihZ008QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Just wondering if anyone's tried this case. It would be nice to know about the quality and fitting. I'm also very curious if that belt clip will last.
Thanks in advance!
J
hello,
I've not tried this case but I've had several with the plastic belt clip
and if you have a job that involves sitting a lot they can be fragile,
or if you do lots of manual work. I find the sewn belt loops flatter
and stronger. the krussel case is hard to beat
jay
Never used it, but i'm certain you'll soon be disappointed if you buy that case. IMO, a good case is an absolute must. You don't want your Athena falling off your hip when getting out of the car do you? This always happened with my old axim case with a plastic clip. Nutshell guarantees their case, including the steel clip or leather loop (whichever you get), for two years. Expensive though, but worth every penny to protect my athena.
http://tuff-as-nuts.com/index.asp?PageAction=VIEWPROD&ProdID=564
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
skyungjae said:
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
Click to expand...
Click to collapse
Just watch the screen. I once put my universal in a case in my trousers pocket, you guessed it the screen cracked! cost £100 to fix it. lord knows how much the athena's screen would cost, more than the machine is worth I guess.
I have one, the 2nd week the belt clip brike getting in the car. Not to mention the phone slipped right out from it twice, with my foot action as a cushion (broke a piece of th tab on the battery door) and the 2nd time was last week at the gas station. The cases are designed with crappy materials but with a bit of mod I saved mine from going into the garbage. I had to cut the back open and put a piece of plastic in it for more support against it flopping. I used a hot air gun to soften the side holders and bend them in slightly for a more snugged fit. At the end of all that the next morning I broke the plastic tab on the case going into the car. Now I still have the case using but only because I've not finished mounting the belt clip on the OEM case as yet, as i've already already cut a caller display into the case and used that strip to make a leather flap to close it. Once I find a steardy belt clip I will post pictures of the mod. If I can't find one strong enough that will not break I will go for a standard clip mounted back and stitched on for a better look.
Back to this clip, I would recommend getting it if you can do a little bit of mod on your own, but BE WARNED if you don't mod the rails on it, your liable to damage your device, when (i said when, because eventually it will) slide out.
See what I said about that ebay case, and what you should buy instead on my thread: http://forum.xda-developers.com/showthread.php?t=344605
Bottom line, run FAR, far away from that ebay case.
Tuff-as-Nuts now has an option to get a slightly larger Athena case that will accomodate the Athena+case (thanks to my having one special ordered one). You can now have it either way.
Brad Miter
Ebay Trash
I had the ebay case for one week before the clip broke. It is made of the cheapest, thinnest plastic I have ever seen. I have a Verizon phone from my employer that came with a clip similar to this one. Even though the Verizon phone is about 80% lighter than the Advantage, the clip that came with it has plastic three times thicker. After the Ebay clip broke, I started using the case with my Verizon clip. It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
LocoHarami said:
I It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
Click to expand...
Click to collapse
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Abram said:
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Click to expand...
Click to collapse
A very good, protective black leather case. No belt clip.
http://cgi.ebay.co.uk/Book-Type-Lea...hash=item120199602780&_trksid=p3911.m14.l1318
Post 12 from wajiguqu0223 reported. Completely meaningless in the context of this entire board, and my guess is its a precursor to some major spam campaign.
edit: old post 12 has been deleted. Good. (which now makes this post 12, lol)
Anyone know of a holster/case like this, I don't like the big bulky leather stuff just want something small and like to clip to my belt.
http://www.seidioonline.com/PhotoGallery.asp?ProductCode=HLHTCH2AS
Thanks
EnderWiggen said:
Anyone know of a holster/case like this, I don't like the big bulky leather stuff just want something small and like to clip to my belt.
http://www.seidioonline.com/PhotoGallery.asp?ProductCode=HLHTCH2AS
Thanks
Click to expand...
Click to collapse
This is slimmer than most other clip on holsters ... but the photographer of this ad image is stupid. Why? Well dude the Touch Pro is facing the wrong way on the clip. Seriously, how hard is it to know which way is the front and the back?
poetryrocksalot said:
This is slimmer than most other clip on holsters ... but the photographer of this ad image is stupid. Why? Well dude the Touch Pro is facing the wrong way on the clip. Seriously, how hard is it to know which way is the front and the back?
Click to expand...
Click to collapse
Umm, I think that is the correct way to holster the phone. It's holstered that way so that the screen will be protected from scratches and impact since it will be facing your body.
rogatsby said:
Umm, I think that is the correct way to holster the phone. It's holstered that way so that the screen will be protected from scratches and impact since it will be facing your body.
Click to expand...
Click to collapse
It's not a case, it's a holster, unless you're talking about a case with a holster clip. But this is a holster dude.
From what I see, the purpose of a holster is to be able to clip in on your belt so that you have fast access to the phone.
poetryrocksalot said:
It's not a case, it's a holster, unless you're talking about a case with a holster clip. But this is a holster dude.
From what I see, the purpose of a holster is to be able to clip in on your belt so that you have fast access to the phone.
Click to expand...
Click to collapse
Exactly. If you wear a holster on your belt, chances are good that while walking around, getting in and out of your chair, getting into a car, etc., the holster and phone will bump into things. That's why you wouldn't want the screen facing out. Also, when you unholser it, if the phone is facing your body (as shown in the pic), it will be facing your face. Think about it. That picture is correct.
rogatsby said:
Exactly. If you wear a holster on your belt, chances are good that while walking around, getting in and out of your chair, getting into a car, etc., the holster and phone will bump into things. That's why you wouldn't want the screen facing out. Also, when you unholser it, if the phone is facing your body (as shown in the pic), it will be facing your face. Think about it. That picture is correct.
Click to expand...
Click to collapse
Holsters are an item of convenience and quick access. Cases are what are used to protect the screen and other parts.
BTW, with Seido and your configuration of the holster, you won't get enough convenience out of that. As of matter of fact, you're going to have to unclip the holster from the phone every time you want to use it or look at notifications.
Here are some various pictures
http://www.amazon.com/BoxWave-Corporation-Samsung-i760-Holster/dp/B00119OTH4
http://store.treocentral.com/seidio-swivel-clip-holster/4A24A154.htm []
http://www.daydeal.com/product.php?productid=8553
http://www.boxwave.com/products/holsterclip/holster-clip-palmone-treo-650_442.htm
http://www.amazon.com/Sprint-Centro-Smartphone-Accessory-Bundle/dp/B0015X7RQ6
http://www.discountcell.com/cellular/pn/Blackberry_HLBB8330AS
http://www.bestcellaccessories.com/...lip-t-629-t629-6-item-ss-17221075068-1-p.html
I believe it is more important to enhance your performance than to protect your phone. In fact I think by having a convenient device you are more likely to be happy and to be productive. Productivity = more likely to get a job promotion for example. Job promotion = better money. Better money = upgrades.
Seriously those who buy chunky cases and covers are wasting their time and money and especially their comfort. Why buy shell/cases for your phone's exterior when it makes the device uncomfortable? After all we bought a luxury device. Just try to take care of your phone like a car. I mean seriously, you don't buy armor (analogous to cases for phones) for your car right?
poetryrocksalot said:
Holsters are an item of convenience and quick access. Cases are what are used to protect the screen and other parts.
BTW, with Seido and your configuration of the holster, you won't get enough convenience out of that. As of matter of fact, you're going to have to unclip the holster from the phone every time you want to use it or look at notifications.
Here are some various pictures
http://www.amazon.com/BoxWave-Corporation-Samsung-i760-Holster/dp/B00119OTH4
http://store.treocentral.com/seidio-swivel-clip-holster/4A24A154.htm []
http://www.daydeal.com/product.php?productid=8553
http://www.boxwave.com/products/holsterclip/holster-clip-palmone-treo-650_442.htm
http://www.amazon.com/Sprint-Centro-Smartphone-Accessory-Bundle/dp/B0015X7RQ6
http://www.discountcell.com/cellular/pn/Blackberry_HLBB8330AS
http://www.bestcellaccessories.com/...lip-t-629-t629-6-item-ss-17221075068-1-p.html
I believe it is more important to enhance your performance than to protect your phone. In fact I think by having a convenient device you are more likely to be happy and to be productive. Productivity = more likely to get a job promotion for example. Job promotion = better money. Better money = upgrades.
Seriously those who buy chunky cases and covers are wasting their time and money and especially their comfort. Why buy shell/cases for your phone's exterior when it makes the device uncomfortable? After all we bought a luxury device. Just try to take care of your phone like a car. I mean seriously, you don't buy armor (analogous to cases for phones) for your car right?
Click to expand...
Click to collapse
You're free to holster the phone screen out. If that's your preference, go ahead. Most holsters are leather pouch types so the screen is protected whichever way it's facing. But with this holster, you will damage the screen more likely than not if you use your configuration. In any event, even assuming everything you said is true, it would come down to a matter of personal preference. You ridiculed the photographer, but there is a reason for holstering the phone that way as I have already explained. Yes, holsters are partly for convenience. But that doesn't mean everyone would be willing to sacrifice all protection like you. Besides, the primary convenience factor, which is being able to easily access and take out your phone (without having to dig in your pockets) still exists with the photographer's configuration.
Besides, in at least one of your links, the phone (Blackberry) is holstered with the screen facing in to PROTECT THE SCREEN.
http://www.discountcell.com/cellular/pn/Blackberry_HLBB8330AS
Returning to the holster in question (the one posted by the original poster), have you bothered to read the product description? Here it is:
Seidio's Spring Clip Holster has been refined from years of customer feedback and advances in technology. A durable spring clip holds your device securely in place, and then lifts for quick access. Both the felt liner and the face-in design protect your screen from scratches and exposure to outside elements, and Seidio's signature soft touch coating provides a better feel and added grip. This holster can be worn in any one of seven different positions, ranging between horizontal and vertical.
- Spring clip lifts for easy access and removal
- Felt liner and face-in design protect the screen
- Rotating swivel belt clip with choice of seven angles
LOL you guys are too funny...I have had seidio holster for all my phones and love it, it protect it enough (screen faced in), its light and not bulky and easy access to the phone.
I'm looking at getting an X1 but I won't if I can't get a good holster for it. So far I guess no one knows?
I hope someone knows of one and posts up. I'd grab one too. (Although it almost sounds like it's illegal for a holster to actually help protect too.)
asdf204 said:
你们的Ｘ1多少钱买的？￥？？
Click to expand...
Click to collapse
I think you pressed the "chinese" key on your keyboard, its next to the caps lock!
I need to make a decision on which one to get. I really want to figure a way out on putting a belt clip on one of these, but not sure how to or what clip would work. It seems the Noreve was offered with a belt clip which was later no longer issued as it was breaking due to the weight of the case and streak in it. If anyone has one of these and worked out a way, please let me know. Thanks:
Noreve
Tuff-Luv
I have a Tuff Luv case, reviewed on here a while back, great piece of kit and very well made but no belt clip. To be honest I wouldn't trust my streak to a belt clip no matter who made it.
2devnull
Hi,
from what I have read on the forum and the net..
I can say, carrying it on a Belt (clipped) may not be the best idea.
It either goes well in your deep(er) pant pocket, or in your backpack!
from the choice, the Noreve seems much more classy than the later one.
My 2 cents!
care,
Sony
I agree. The device is to big to be trusting it to some cheap plastic belt clip. even tho I ordered the defender by otter box I know for a fact ill never use the belt clip.
The noreve looks better..plus there is a stand on the back , bit more functional
Thanks all for the input. I am surprised that many have stated that a belt clip is not desired. I must say, I have been carrying it around with the cloth pouch that came with it for the last few weeks and I really don't think I would trust not having it on my belt. This may be because I have always had a leather flip type case for all my previous phones for close to 15+ years.
The other thing is that I don't think I would trust to keep it in jeans pocket and other than work, I don't carry any sort of bag with me, so I need something that does not consume one hand.
But this is interesting feedback. I was hoping to get something more like this and not some adhesive thing. Although, they seem to only be selling a minimum quantity of 1500.
Also, Noreve seems to have this clip which I don't know if it was the one they offered before, but it looks like it is a new design. I will need to contact them to see if their streak case has the place to screw in the part that slides into the clip. But, the one with the rivets and backing plate does look a whole lot more secure.
I ordered one of these with belt clip number 01 (scroll down to look at options). They will custom make them to your dimensions if you want to put it in the case with a cover on it. I have not received mine yet, but reviews elsewhere were very good. They offer other configurations. Right now they have no listings because of the Chinese New year.
Well, it looks like the Noreve case + clip + shipping will cost USD $103. Probably twice as much as I was looking at paying.
I guess I'll be back to looking at the Otter Defender or the Tuff-Luv if I can modify it. So strange that most nice accessories for this phone is only available across the pond.
marvin02 said:
I ordered one of these with belt clip number 01 (scroll down to look at options). They will custom make them to your dimensions if you want to put it in the case with a cover on it. I have not received mine yet, but reviews elsewhere were very good. They offer other configurations. Right now they have no listings because of the Chinese New year.
Click to expand...
Click to collapse
Yes, I had first look into this. The issue I have with this other than waiting for their New Year to complete is that I am afraid of dropping the streak after taking it out of the case. With the two I was looking at and also the defender, at least they are made to stay in a case and benefit from some protection.
I don't know anymore, it is becoming frustrating. With all these price points and pros and cons, it is hard to just try them all by ordering and no place to go an try them without purchasing.
2devnull said:
Yes, I had first look into this. The issue I have with this other than waiting for their New Year to complete is that I am afraid of dropping the streak after taking it out of the case. With the two I was looking at and also the defender, at least they are made to stay in a case and benefit from some protection.
I don't know anymore, it is becoming frustrating. With all these price points and pros and cons, it is hard to just try them all by ordering and no place to go an try them without purchasing.
Click to expand...
Click to collapse
I ordered the easecase large enough so that I can leave the Otterbox Impact case on the phone and carry it in the leather case. My thinking was that I have a carry case and I still have protection when I remove it.
The best way to carry/manage using the Streak as an every day device is still evolving for me. I have spent at least 1/2 the cost of the phone on accessories.
marvin02 said:
I ordered the easecase large enough so that I can leave the Otterbox Impact case on the phone and carry it in the leather case. My thinking was that I have a carry case and I still have protection when I remove it.
The best way to carry/manage using the Streak as an every day device is still evolving for me. I have spent at least 1/2 the cost of the phone on accessories.
Click to expand...
Click to collapse
hmmm.....this is very interesting.....I know when I had my iPhone, I got this and then put it into a leather belt case, so this may actually be like the same thing. I would probably go for the commuter case however as I read the silicon is a bit different from the Impact and Defender in that it is less susceptible to lint etc.
Thanks for the idea. The cost will run it up there again to approx $70-80 and I'll have to wait about 2-3 weeks for the easecase part
2devnull,
I don't believe that there are any good inexpensive ways to carry the Streak around and protect it. I have seen reports of some people using a Nintendo DS carrying case. I looked at that and just didn't want to go that way.
What about this one?
Just found this one on Amazon
http://www.amazon.com/Zing-571-221-MPEBK1-Medium-Electronic/dp/B000E6S3TK/ref=sr_1_56?s=electronics&ie=UTF8&qid=1296433970&sr=1-56
Well, I think I'm going the Otterbox Commuter + Easecase route unless something changes by the time Easecase returns.
I too am looking for a belt leather case for my Streak as I don't like caring the device in my pocket too much. I did contact
I contacted Noreve regarding their CLIP and Case combo but here is what I got!
Is the Dell Streak case compatible with the belt clip?
Do you have a case for Dell Streak that can be clipped to a belt?
Dear Rafal,
No I am sorry.
Too heavy.
My best regards,
Michael
Innovacases | Noreve St.Tropez
Haute Couture for Mobile Devices
Click to expand...
Click to collapse
Click to expand...
Click to collapse
The Monaco Leather case has a clip. It will only hold a naked phone, even a TPU case won't let it close. More Pics
marvin02 said:
The Monaco Leather case has a clip. It will only hold a naked phone, even a TPU case won't let it close. More Pics
Click to expand...
Click to collapse
A lot of money for something that does not close and you risk taking out an unprotected Streak and dropping it. A little modification and internal size would be ideal so that you can put a protected Streak (with Impact or Commuter or even jelly) inside it.
marvin02 said:
The Monaco Leather case has a clip. It will only hold a naked phone, even a TPU case won't let it close. More Pics
Click to expand...
Click to collapse
2devnull said:
A lot of money for something that does not close and you risk taking out an unprotected Streak and dropping it. A little modification and internal size would be ideal so that you can put a protected Streak (with Impact or Commuter or even jelly) inside it.
Click to expand...
Click to collapse
The Monaco case is only useful if you use your phone with no cover/case. I had one for one day. I got it in a batch if stuff I bought and sold it the next day. It does look well made and suits someone who carries the Streak naked. It would be great for someone who carries the Streak in a purse or backpack a lot.
I have the Otterbox Defender on my phone and bought a case from eBay seller easecase. They will customize the cases to your dimensions. I will get some pics up of my easecase soon.
I offered the Monaco as a suggestion because everyone uses their phone differently and if you like going light and sleek it would be a good fit.
I stated before that I have not found any good cheap options. I got my Defender for no cost, but had to buy a group of accessories and then sell what I did not want to do that. I have more time than money so that method worked for me.
Agreed, if a purse or bag or someone who is comfortable with a naked Streak, it would be ideal - however I think I read that it does not close correctly.
2devnull said:
Agreed, if a purse or bag or someone who is comfortable with a naked Streak, it would be ideal - however I think I read that it does not close correctly.
Click to expand...
Click to collapse
The one that I had was a perfect fit for the phone with no case. The openings were aligned properly for the headphone and charging ports. If I were carrying my Streak with no other case/cover on it I would have kept it.
The Monaco case is such a good fit that even a TPU case makes the phone too big.
hey guys so i am loooking for a otterbox like case for example i want a hardcare that can with stand hard fall as i drive from a forklift and work allows me to have headphones in only one so i can hear people yell at me when i run **** over lol, but seriouly i am looking for something like the otterbox with a belt or clip holster (easy access) and access to headphone jack as well whitch the otterbox failed miserably at, i found a few hower they didn't make it for the note only the s3 seems like this phone is lacking cases in this design as well so any and all help would be greatly appreciated as i ran into a dead end.
what's the problem with the otterbox?
the headphone jack is perfectly accessible for me.
Look into Seidio CONVERT Combo, check out main review link in my signature. You get SURFACE for light use and CONVERT shell on top of it for extra protection and one of the best belt clips with lockable latch. Plus, you will get a kick stand, a soft plug/cover for headphone, micro-usb, and camera port (no strain on your cables like Otter), and when you pair up with VITREO tempered glass screen protector - it's ultimate!!! And like a said, at work use the full CONVERT suit. When you get home, strip out CONVERT layer and you got a slim SURFACE protection layer. Based on your requirement, it's the most flexible solution.
vectron said:
Look into Seidio CONVERT Combo, check out main review link in my signature. You get SURFACE for light use and CONVERT shell on top of it for extra protection and one of the best belt clips with lockable latch. Plus, you will get a kick stand, a soft plug/cover for headphone, micro-usb, and camera port (no strain on your cables like Otter), and when you pair up with VITREO tempered glass screen protector - it's ultimate!!! And like a said, at work use the full CONVERT suit. When you get home, strip out CONVERT layer and you got a slim SURFACE protection layer. Based on your requirement, it's the most flexible solution.
Click to expand...
Click to collapse
so here is the deal i have the active w/o a hoster what would i need to get the convert combo without buyingh the whole combo as it would be like buying 3 cases trying to be smart with my money if you get it or would i just be better off buying the whole thing..??
Convert is intended to work with surface only. Search on Amazon to get a good deal.
vectron said:
Convert is intended to work with surface only. Search on Amazon to get a good deal.
Click to expand...
Click to collapse
http://www.amazon.com/gp/aw/d/B00B588CVK/ref=mw_dp_img_5?in=5&is=&qid=1376108015&sr=8-1 that what you are describing?
Bfitz26 said:
http://www.amazon.com/gp/aw/d/B00B588CVK/ref=mw_dp_img_5?in=5&is=&qid=1376108015&sr=8-1 that what you are describing?
Click to expand...
Click to collapse
That's the one. Funny when you read reviews for this case all are 4/5 stars except for one 1-star review posted clearly by Otterbox employee lol!
vectron said:
That's the one. Funny when you read reviews for this case all are 4/5 stars except for one 1-star review posted clearly by Otterbox employee lol!
Click to expand...
Click to collapse
Lol yup the only bad review I am seeing is that the actual clip is a bad design it doesn't clip properly or is too hard to get out that us my most used feature of a case some even reported that the clip went out in a few months so I am very skeptical before buying may go to the mall first to try this out cause in am Def not paying 75 dollars retail for this case
Bfitz26 said:
Lol yup the only bad review I am seeing is that the actual clip is a bad design it doesn't clip properly or is too hard to get out that us my most used feature of a case some even reported that the clip went out in a few months so I am very skeptical before buying may go to the mall first to try this out cause in am Def not paying 75 dollars retail for this case
Click to expand...
Click to collapse
Keep in mind, clip is removable and replaceable. Plus I remember Seidio mentioned about bike mount and car mount prototypes that clip right on to a holster when clip is removed.
I will use no other belt clip other than seidio. I've been sold on them for my last 3 phones. My job can be a bit rough on belt clips and theirs has always held up.
Sent from my SPH-L900
jyveturkey said:
I will use no other belt clip other than seidio. I've been sold on them for my last 3 phones. My job can be a bit rough on belt clips and theirs has always held up.
Sent from my SPH-L900
Click to expand...
Click to collapse
sweet it sucks cause i already have the sedio case wi/o belt clip so i have to drop another 50 bucks basically on the same case and this is used sucks
i really like this case interested on where you actually got it from?? http://forum.xda-developers.com/showthread.php?t=2174889
Bfitz26 said:
sweet it sucks cause i already have the sedio case wi/o belt clip so i have to drop another 50 bucks basically on the same case and this is used sucks
Click to expand...
Click to collapse
I'm pretty sure if you look around you can find just the bely clip. Maybe eBay?
Sent from my SPH-L900
jyveturkey said:
I'm pretty sure if you look around you can find just the bely clip. Maybe eBay?
Sent from my SPH-L900
Click to expand...
Click to collapse
Ya but all I have is the Sedio active w o belt so it's not so protective I don't think
Bfitz26 said:
i really like this case interested on where you actually got it from?? http://forum.xda-developers.com/showthread.php?t=2174889
Click to expand...
Click to collapse
both "denfender" and "survivor" were from case-parts/tvc-mall The last time I checked, "survivor" was still listed in there, while "denfender" (intentional spelling) was removed from Note 2. Hit them with email, they might still have it Otherwise, you might have to search through alibaba.com sellers, although those don't take paypal and to search in there you need to get creative with spelling (like otterering or ottered) lol!!!
vectron said:
both "denfender" and "survivor" were from case-parts/tvc-mall The last time I checked, "survivor" was still listed in there, while "denfender" (intentional spelling) was removed from Note 2. Hit them with email, they might still have it Otherwise, you might have to search through alibaba.com sellers, although those don't take paypal and to search in there you need to get creative with spelling (like otterering or ottered) lol!!!
Click to expand...
Click to collapse
Think I found it!!! All the reviews say all 5 stars what is your opinion of it good quality study clip?? What cons do u have for this puppy
http://www.tvc-mall.com/details/Survivor-Military-Duty-Belt-Clip-Case-for-Samsung-Galaxy-Note-2-II-N7100-Black-White-MHC-N7100-84B/
Oh, no, that clip is a junk. Don't even bother. The case is bulky and will help your N2 survive a nuclear attack, but belt clip is a joke. Survivor case was designed by Griffin for S3 and this N2 version was unofficially scaled up by HK manufacturers for a bigger N2 design. If belt clip is your priority, this case is not for you.
Bfitz26 said:
Think I found it!!! All the reviews say all 5 stars what is your opinion of it good quality study clip?? What cons do u have for this puppy
http://www.tvc-mall.com/details/Survivor-Military-Duty-Belt-Clip-Case-for-Samsung-Galaxy-Note-2-II-N7100-Black-White-MHC-N7100-84B/
Click to expand...
Click to collapse
well that sucks i really liked the case was literally going to buy it fuuu i have a very hard time dropping 50 bucks on a case well i don't but my wife sure in hell does
Bfitz26 said:
well that sucks i really liked the case was literally going to buy it fuuu i have a very hard time dropping 50 bucks on a case well i don't but my wife sure in hell does
Click to expand...
Click to collapse
How about looking into an alternative of belt clip pouches? One of my other review threads is up now at the top of the forum with a discussion. That vertical pouch is actually not bad since it's easy to get phone in'n'out with a velcro flap, you can keep it on a belt clip to take it out, or belt loop to keep it permanently, and its vertical and secure. Works with any slim to bulk cases. The ultimate solution would be to have zerolemon rugged case that will support belt clip as well - would be the best of every world to have endurance and protection to the Nth degree. But the only info they released so far is that rugged case will accommodate original slim, double width, or triple-capacity ZL battery, while we are not sure if it will have kickstand or holster yet. A couple more weeks of waiting.
vectron said:
How about looking into an alternative of belt clip pouches? One of my other review threads is up now at the top of the forum with a discussion. That vertical pouch is actually not bad since it's easy to get phone in'n'out with a velcro flap, you can keep it on a belt clip to take it out, or belt loop to keep it permanently, and its vertical and secure. Works with any slim to bulk cases. The ultimate solution would be to have zerolemon rugged case that will support belt clip as well - would be the best of every world to have endurance and protection to the Nth degree. But the only info they released so far is that rugged case will accommodate original slim, double width, or triple-capacity ZL battery, while we are not sure if it will have kickstand or holster yet. A couple more weeks of waiting.
Click to expand...
Click to collapse
what would be perfect is a leather pouch or whatever with a built in wallet that would be the best case ever been looking but no luck yet...hoping to find something
So I've ordered and received the following 2 cases for my M8 so far:
SUPCASE Unicorn Beetle Premium Hybrid Protective
Aduro Shell Holster Combo Case
I'm not completely happy/unhappy with either one, so I've gone ahead and ordered the following cases:
Minisuit Clipster Kickstand Case - This one looks identical to the Arduro case but is $3 cheaper. If I decide to keep it, even after I ship back it will be the cheaper option.
HTC M8 One 2 Puregear Kickstand Case Holster Combo - This one looks very similar to the Arduro/Minisuit, but I'm hoping the shell covers a bit more and/or the holster might be good with one of the other covers.
Seidio Surface Case with Metal Kickstand and Holster Combo
Otterbox Defender Series
Spigen Capsule Clear
i-Blason Prime Series Dual Layer Holster Cover with Kickstand and Locking Belt Swivel Clip
SUPCASE Premium Hybrid Protective Bumper Case
I'm not planning on writing complete reviews because it would be too time consuming, but I would be happy to answer any questions that anyone has.
I have preferred SEIDIO cases in the past with the holster combo. I had those on my HTC Tilt and my first Droid 2 - which was lost at an airport when I think a piece of luggage pulled the whole thing from my belt when I lifted it. Apart from that experience (which I blame myself for as much as anything), I'd been happy with SEIDIO...the Tilt survived a motorcycle accident that totaled my bike, but the phone was fine. SEIDIO was pretty expensive though, so I went through 2 or 3 much cheaper rip-offs (sans holster) over the last couple yeats of my phone.
I think the traditional SEIDIO rubberized cases provided a good balance of protection without being too incredibly bulky.
I'm caught at an impasse now with the M8 because it is such a nice looking phone I'd like to show it off with more of a light and clear case. OTOH, I have a 2 year old that I'd like to protect it from. Also, the M8 is much bigger than the phones I've had in the past (height and width wise, thickness is actually thinner) - so I'm not sure how a thick case will influence my carrying it around.
I think the best solution for me may be a case that provides protection somewhere in-between a TPU and a Otterbox (i.e. middle ground) and ideally be able to fit into some holster. I feel that the holster is necessary due to the size of the phone in a jeans front pocket - especially if a case is grippy and hard to get out.
Anyway, the above thoughts are how *I* will be judging the cases and some of them may change my mind entirely (e.g. The Otterbox, which I really don't think I want, but thought I would give it a shot).
I'll ship all the ones I don't want back to Amazon. I figure $10 return shipping is a good investment to find the right case for 2 years of my life.
Let me know if you have any questions about the cases and I will try to answer them!
TraderJack said:
HTC M8 One 2 Puregear Kickstand Case Holster Combo - This one looks very similar to the Arduro/Minisuit, but I'm hoping the shell covers a bit more and/or the holster might be good with one of the other covers.
Click to expand...
Click to collapse
I would like to hear more about this one. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
d1ez3 said:
I would like to hear more about this one. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
Click to expand...
Click to collapse
Sure. I think the one from Verizon is identical to the Minisuit/Arduro ones I mention above. None of them look that slick...with the black cross-hatching. About they only thing they have going for them is a good holster setup...but that's why I'm hoping the Puregear has something else going for it rather than a slightly different design.
The cases will be here on Wednesday and I hope to try them all out then.
This is great.... Im very interested in SUPCASE Premium Hybrid Protective Bumper Case
but was holding off ordering from Amazon. Can you tell me how much thickness it adds and overall feel, comfort etc... I agree, I love the body of the M8 and needs to be shown off however it also needs to be protected at the same time.
How's spigen capsule clear? Is it a fingerprint magnet? I presume it's slippery?
As long as we're talking about cases, you should try looking at the Dualtek case for the M8. It's a little bulky but definitely protecting the phone and looks stylish. Feels great, too.
I've been using Otterbox cases for every phone since I switched to Android years ago but I agree that the Defender and Commuter cases make this phone too bulky. Luckily they have the Symmetry Series which is slimmer (one piece, plastic shell with rubber liner built in) but still provides great protection. Color schemes are limited, I went with black, but they have around 5 choices if you like brighter colors.
Cons are that the case is a little slippery for my tastes and it adds bulk to an already big phone but I drop my phone every day so it's a trade-off.
http://www.otterbox.com/Symmetry-Series-for-HTC-One-(M8)/htc28-one-m8,default,pd.html
I just got the cases this evening. I'll respond directly to the questions asked, and then I'll give my overview on the others:
d1ez3 said:
I would like to hear more about this one [HTC M8 One 2 Puregear Kickstand Case Holster Combo]. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
Click to expand...
Click to collapse
The Puregear is almost identical to the Arduro and Minisuit cases as I assumed it would be. It has a slightly different cutout for the camera (which I like less), and a different surface texture from the cross-hatching type on the other two. You can clearly see the surface texture differences in the Amazon pics. While I like the design texture on the Puregear slightly better, it is really so equivalent in every other way that it isn't worth the $4-5 premium you would pay over the Minisuit. These are low bulk cases..good holster. These cases would do virtually nothing in a drop except maybe allow a bounce before the phone snapped out of it. That being said my similar case for the Droid took a few drops and the phone was no worse for wear.
cue_32 said:
This is great.... Im very interested in SUPCASE Premium Hybrid Protective Bumper Case
but was holding off ordering from Amazon. Can you tell me how much thickness it adds and overall feel, comfort etc... I agree, I love the body of the M8 and needs to be shown off however it also needs to be protected at the same time.
Click to expand...
Click to collapse
This one is maybe one of my favorite from the bunch. It is way easier to take on and off then the SUPCASE Unicorn Beetle Premium Hybrid Protective case I also purchased. Unlike the Beetle, the back is totally clear instead of frosted - so it shows off the phone. The sides however are not rigid like the Beetle, which is why it can be removed from the phone easier. The back is more rounded like the phone, whereas the Beetle is more squared. It has a slightly tacky feel...maybe not as much as the Spigen below, but it is grippy. I would say it is kind of your standard TPU type case, but of the utmost quality for these type. Since you can find TPU cases for $3-4, I think the $10 for this is not totally out of line. I'm really unsure that either of the SUPCASEs would offer any real protection from a drop. I will almost definitely be keeping one of these cases for now.
One other benefit of this case is that it fits into the Minisuit/Arduro holster really well.
richteralan said:
How's spigen capsule clear? Is it a fingerprint magnet? I presume it's slippery?
Click to expand...
Click to collapse
Despite the term "soft" being in the description in Amazon...I thought this was going to be a hard case - so I was a bit surprised.
It is actually not slippery at all, quite the contrary. I also don't think it is that bad of a finger print magnet. It is in some ways similar to the SUPCASE Premium Hybrid Protective Bumper Case I mention above, except that it is clear all around instead of having a black bumper. However (and I think I read this elsewhere in the reviews) the clear color of the case has a yellow tinge to it that is really disappointing since the main feature of this case is to showcase the phone. This case may have just a *bit* more cushion than the SUPCASE - but in all honesty I still don't think any of these are offering great drop protection. I think I prefer the SUPCASE (either one) to this one - it just doesn't have the same "sparkle" that you get from the pics.
Going onto the other cases.
The Otterbox and the SEIDIO - the two most expensive ones. And, probably because of that, the two biggest disappointments:
The Ottterbox was just ugly out of the box. I've never had one before because I always thought they were bulky and ugly - but I wanted to give it a chance. Even though the Otterbox probably would protect better than most of these, I still don't think it would be foolproof. I also really dislike the screen covering piece which is non-optional. For the cost, I just wouldn't consider something like this over the i-Blason (see below).
The SEIDIO had the same nice finish I was used to on their matte cases. I wasn't a huge fan of the two piece snap together design. I also got one with a slight manufacturing defect and the pieces didn't line up perfectly. Because of the two piece design, it was able to stay as a slim case but protect all around the edges. However I'm sure the case would snap open if the phone fell onto a hard surface. Additionally, as much as I enjoy the quick release holster of the SEIDIOs, they are not without their problems and can easily get caught on things and drop your phone (happened to me not infrequently with my other cases). The kickstand on this phone was also not that attractive being a bit flimsy and off to the side. Like the others, I also really don't know how much protection from a drop this would give you - probably somewhere just north of the SUPCASE/Spigen. Like the Otterbox, just not worth the money on this phone.
Finally the i-Blason... I think it is one of the better in terms of protection - being a 2-piece shell case. South of the Otterbox maybe, but better than the rest. Not a bad looking case, though not beautiful. I almost wish they had a model without the kickstand and big fat grooves on the back. I don't know if those grooves serve a real functional purpose, but if you removed those pieces you would have a much cleaner looking case with probably the same level of protection.
Looks wise - I think overall the SUPCASE Premium Hybrid is my favorite... I'm just not sure it is going to give me the protection I want from my toddler. I'm considering keeping that and the Minisuit (mostly for the compatible holster). Or, perhaps I will keep the i-Blason for most of the time around the house, but also the SUPCASE for a svelter pocket profile and when I want to show off the phone.
I'm going to keep looking I think for something else like the iBlason. I might give up on the holster idea altogether as I realize it isn't the 90s anymore. I need to see how well this phone does in my pocket over the next week or two to decide if it's a priority.
If you all have more questions on these, I'll do my best to answer.
I just purchased the Case Mate Naked Tough Case from Amazon. So far so good. It has some shock protection and still shows the good looks of the phone. I'm using it in conjunction with a Zagg glass shield. I would post a link, but I suppose I need to post a few more times before I can.
I've only used Otterbox defenders in the past. That being said, I just bought a M8 today and looked at the reviews on Amazon. A lot of people complain about the clear screen protector being bowed or warped and not tight against the screen. What's your impression on this issue? And from the sound and looks of the design, it sounds pretty similar to the M7.
Sent from my HTC One_M8 using XDA Free mobile app
FearlessAZ said:
I've only used Otterbox defenders in the past. That being said, I just bought a M8 today and looked at the reviews on Amazon. A lot of people complain about the clear screen protector being bowed or warped and not tight against the screen. What's your impression on this issue? And from the sound and looks of the design, it sounds pretty similar to the M7.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Definitely. Honestly I played with the otterbox for all of 30 seconds. First off, I just thought it was ugly...
Put it on and it seemed pretty bulky, although I was going to give it a chance since I knew that with that bulk came good protection.
The minute I touched the screen though I observed exactly what you are stating, the screen protector is not flush and that gave it an overall cheap feel.
So here is my update as I am leaving town for a couple of weeks and am choosing a case to come with me for the first real road test:
Based on my observations above, and the info from this thread, I think I'm going to stick with the Supcase Beetle.
While I like the SUPCASE Premium Hybrid Protective Bumper Case as well, I feel that it just doesn't offer great protection. Also, I find the volume buttons a little loose, as if they move too much off contact with the phone when you press on them.
The Beetle may only be a ~6-7 in the protection department, but the only ones that beat it are the Otterbox and probably the i-Blason. I just can't do the otterbox, and the i-Blason is a tad bulky and doesn't showcase the phone at all. I wish they removed the back nubbins and kickstand from the i-Blason. I haven't found a really nice and lean 2 piece case (internal silicon, hard outer shell). The Spigen 2-piece (not reviewed here) is a good contender for that role but it blocks the IR port, which is a non-starter (even though I will rarely use that feature, on principal I don't want a case that removes features from my phone).
So, for now I'm opting more for an "8 looks and 6/7 protection." The UAG looked like a good alternative that might have been 8 on both fronts, but from my thread linked above someone who has owned both feels that the Beetle is close on par with the UAG from protection standpoint. Price wise, the Beetle wins hands down.
I am still left though in a situation where I don't have a holster. I don't know yet how big of a problem that will be. I need to see how the Beetle does in my pants pocket over the next week. If it doesn't work out, and I can't find a compatible holster for the Beetle, I may have to abandon it all-together because it is just too hard to take it out of the Beetle on a regular basis to put into a holster-compatible case...I don't want to have to do that even weekly.
Dang. That is kind of a let down. I don't mind bulkyness at all but if that screen protector isn't tight, it's just pointless for me. I work construction and need something that won't allow the dirt to get between the screen and protector. I'll look into a few that you suggested. Thanks!