Related
I screwed my Kaiser gps by trying to use map4pda which automatically changed the port in settings for gps. What can I do? Gps not working anymore,even after putting back the old settings and doing softresets,even took out the battery for a while
Not a single program can find my inbuilt gps now
I do not want to do a hard reset,I have tooo many progs and no backup
Please help
I am afraid to use any other gps program(even after a hard reset) because this could ruin my gps settings
I read somewhere that gps applet is misconfigured(from factory)..and even a slight modification to it,could lead to my gps not functioning till a hard-reset.
Also it's not normal that a program can modify the gps'settings by itself
I have bad news for you, but at least it confirms that Map4PDA is a bad program. I used to love the program. It worked awesome on my 8525. You can have it use MSN, Yahoo or Google Maps.
I installed it on my Tilt and at first I didn't realize that it was the culprit. Then I hard reset and installed only that program and a few others to test GPS. Once I ran Map4PDA, GPS no workie. Hard reset again.
I have not run it since my last hard reset and my GPS still works perfect....and I have used many, many different GPS programs.
So with all that said, I'm afraid a hard reset is your only option. I am not the only one that got bit by this. I posted in another thread here and a few others had the same results as me.
Lidberg said:
I have bad news for you, but at least it confirms that Map4PDA is a bad program. I used to love the program. It worked awesome on my 8525. You can have it use MSN, Yahoo or Google Maps.
I installed it on my Tilt and at first I didn't realize that it was the culprit. Then I hard reset and installed only that program and a few others to test GPS. Once I ran Map4PDA, GPS no workie. Hard reset again.
I have not run it since my last hard reset and my GPS still works perfect....and I have used many, many different GPS programs.
So with all that said, I'm afraid a hard reset is your only option. I am not the only one that got bit by this. I posted in another thread here and a few others had the same results as me.
Click to expand...
Click to collapse
Thank you for the info..
Are you sure this is the only gps program that messes up the gps?
Did you test Igo,GpsTuner,GpsGate,Pathaway professional,GeoScout??
But Gloposis,BeeLine gps??
Any other incompatibilities?
Thx
I haven't tested all of those. Here's what I have on my phone right now:
FFF (finger friendly friends)
Google Maps
Live Search
GPS test
GPS Utilities
GPS viewer
GPSinfo
Navigator II
TomTom 6
TrackMe
Virtual Earth
VisualGPSce
I think the other ones will be safe. Map4PDA is the only one I've heard of that kills the Kaiser GPS.
A hard reset is your only option and shouldnt be a nightmare.
Work out what apps you want, check you have the cabs etc, sync your device with your pc and away you go.
I keep all my favourite apps cabs on my storage card so that I could hard reset even if away from my laptop (but I do have an exchange server so setting up sync remotely is also easy).
Reinstalling 60 applications IS very time-consuming,let alone the time to configure them and the OS just the way I like them.
But giving that I do not have any other chance,I'll do it
My only concern is that I'll install other application which will kill again my gps and I have to take all from the beggining. I come from an Eten X500 and this was never happened to me.There , NO application could change some system settings..
emariu said:
Reinstalling 60 applications IS very time-consuming,let alone the time to configure them and the OS just the way I like them.
But giving that I do not have any other chance,I'll do it
My only concern is that I'll install other application which will kill again my gps and I have to take all from the beggining. I come from an Eten X500 and this was never happened to me.There , NO application could change some system settings..
Click to expand...
Click to collapse
I too noticed that using different GPS software tends to screw up something on my Tilt. I've used Google Maps and MS Live Search and these tend to screw things up to the point that the GPS is useless. I also have Copilot Live 7 installed and this program has the ability to reset the GPS on my device.
For those not familiar with Copilot, when you go to the Settings panel in Copilot and choose Reset GPS, it asks you to enter a city within 100 miles of your current location in order to reset your GPS properly. If someone could develop an app to replicate this... This would be a great standalone app for all Tilt & variant owners.
But if the gps is already dead,how will Copilot know which city is in 100 miles radius ??it cannot tell the current location,beacuse it cannot get a fix from sattelites...so one cannot do a reset to the gps..
what about a backup? make a backup before you install an app that you don't know if it works or not, install/run app, if all is good, no worries. if all is bad, restore from backup.
the Tilt ROM comes with sprite backup and htc backup is flating around this forum...
emariu said:
But if the gps is already dead,how will Copilot know which city is in 100 miles radius ??it cannot tell the current location,beacuse it cannot get a fix from sattelites...so one cannot do a reset to the gps..
Click to expand...
Click to collapse
Not sure how this works, but I've been able to get my GPS working again every time with this feature.
If entering a location with Copilot fixes your GPS, then it wasnt broken to begin with. Just because Google Maps cant get a fix, doesnt mean that your GPS isnt working (all it means is that you need to download the new google maps which is a lot better).
One needs to think about such problems logically. When you open a GPS enabled APP and try to get a fix, does the orange GPS light flash on the device. If it does, then your gps is working with your device. If it then fails to get a fix it is because it cannot see the satellites. Make sure you are giving it a clean line of sight to the sky (ideally to the south if you live in UK).
If the orange light doesn't come on then your com port settings are wrong and its hard reset time.
Oh and if your GPS is working but seems to take a long time to get a fix, then use QUICKGPS to give it a prod.
In the external GPS settings programs tab set to 4800, in the hardware tab gps hardware port select none, baud rate should be at 4800. In te access tab tick manage gps automatically.
Load the TomTom app that comes with the Kaiser or download it from here. go to config on the gps settings within TomTom and it will right itself
Make a backup of the registry and put is back in this situations, easy and fast when you try different programs.
Btw Igo works fine also Nusa maps (Indonesia), Map King pro and Papa Go..
unwired4 said:
If entering a location with Copilot fixes your GPS, then it wasnt broken to begin with. Just because Google Maps cant get a fix, doesnt mean that your GPS isnt working (all it means is that you need to download the new google maps which is a lot better).
One needs to think about such problems logically. When you open a GPS enabled APP and try to get a fix, does the orange GPS light flash on the device. If it does, then your gps is working with your device. If it then fails to get a fix it is because it cannot see the satellites. Make sure you are giving it a clean line of sight to the sky (ideally to the south if you live in UK).
If the orange light doesn't come on then your com port settings are wrong and its hard reset time.
Oh and if your GPS is working but seems to take a long time to get a fix, then use QUICKGPS to give it a prod.
Click to expand...
Click to collapse
That's not true in every circumstance. Like the OP, I installed Map4PDA. When you run the program, it searches for the GPS (you can't specify what COM port to use manually) and in my case, hangs on COM3 for whatever reason. I let it sit for over an hour and ended up doing a soft reset because the program was unresponsive.
After that, my GPS would not work in ANY program that it worked in previously. I checked and double-checked my settings to no avail. I posted here and on MoDaCo and got some good advice but in the end, only a hard reset fixed it. Yes, the GPS light would blink but my Tilt would run very, very slowly and would never get a fix. That QuickGPS program would error out every time I ran it. I don't know what Map4PDA did, but it hosed my GPS and it looks like the OP got bit too.
Since my last hard reset, I have installed tons of GPS enabled programs and they all work just fine. I also have never run QuickGPS and I can get a fix within 10 seconds in any program.
I know it's not logical, but that is what worked for me.
EDIT: I don't advocate the spreading of paid for s/w, but I would be curious to see if your CoPilot program would successfully reset the OP's GPS.
If a gps program asks for manual configuration of hardware gps port and the baudrate,what should I input? Like Igo for ex....or GpsTuner...
emariu said:
If a gps program asks for manual configuration of hardware gps port and the baudrate,what should I input? Like Igo for ex....or GpsTuner...
Click to expand...
Click to collapse
COM4, 4800 baud
this com 4 is a program port,it's not the harware gps (native) port..
can we find out which port number is the default(hardware)?
But thnks anyway for the answers
COM4 is what works. Yes, technically, it's a soft port, but it has worked with every GPS enabled program I've tried (except for Map4PDA but that is another story).
The neato thing about that is that it allows more than one program to access the GPS at the same time. If you go directly to the hardware, you lose that functionality.
Lidberg said:
COM4 is what works. Yes, technically, it's a soft port, but it has worked with every GPS enabled program I've tried (except for Map4PDA but that is another story).
The neato thing about that is that it allows more than one program to access the GPS at the same time. If you go directly to the hardware, you lose that functionality.
Click to expand...
Click to collapse
I use GpsGate anyway,so using multiple gps programs at once isn't a problem for me,BUT because I cannot use hardware port, we are stucked with 4800 baudrate,which is a limitation only with soft multiplexer(built in the OS)
Hi guys!
Im freaking out! I have a Dutch MDA Vario3 and I just cant seem to get the GPS to work. Tomtom can find the intern gps but no signal! I waited for about an hour today and yesterday it didnt work also..somebody can help me out? I use tomtom 6.032
help me out will yah...
try using the gps test first or quickgps before tomtom.
kidd78 said:
try using the gps test first or quickgps before tomtom.
Click to expand...
Click to collapse
I did quickgps for about ten times!
gps test?
thx for your reply
Were you indoors? Did you move to a different location? You might want to test it with an external gps receiver or try a standalone gps unit (if you can borrow one). Try and find something that is more sensitive than the Kaiser, and, in the same location, see if you can get a signal.
My point is, you might just be in a bad spot. This happens to me at work all the time, it never picks up a signal, even after an hour of searching.
you must set the right com ports up
find out which port gps is on ie. usually com7
go into config (tomtom) annd then guide the tomtom to com7
it will work took me a couple of days to work it out then seemed so obvious
The above advice is all pretty good. If this is the first time you have used tomtom then it can take a good while.
I am assuming tomtom shows the message "no valid GPS signal" after showing briefly the message "No GPS device". If so this is good. It means your com ports are set correctly.
There are two things to be sure of though:
1.
You have aclear view of the sky - especially on the first occassion you get a fix.
2.
Make sure you have a suitable map in the correct location. Obviously getting a fix when there is no map or the map is in the wrong directory will not succeed.
Did quick GPS work and give you a "valid until" date?
GPS test is a nice simple app that will show you the port number you are on so you can make sure tomtom is using the same one. BUT if tomtom only fails at the no valid signal stage then I think your ports are fine.
Finally, some fatal problems can occur if you have changed entries in the "external GPS" settings. This might (according to some folk) require a hard reset to correct. But try the above first.
Mike
Check this thread first..
http://forum.xda-developers.com/showthread.php?t=330412
Try GPSViewer and select the port settings manually and choose "Open GPS".
You should see some som action through GPS strings in the Setup page.
Then try with TomTom or Google Maps.
I never had issues with TomTom, but google map was having hard time initializing. But after using GPSViewer, it works pretty neat and quick!
arunprakashr said:
Check this thread first..
http://forum.xda-developers.com/showthread.php?t=330412
Try GPSViewer and select the port settings manually and choose "Open GPS".
You should see some som action through GPS strings in the Setup page.
Then try with TomTom or Google Maps.
I never had issues with TomTom, but google map was having hard time initializing. But after using GPSViewer, it works pretty neat and quick!
Click to expand...
Click to collapse
It tests all com-ports,but gpsviewer cant find anything..
While it is true that you can screw yourself if you mess with the external GPS settings, you might not have to hard reset. Check the Kaiser Wiki; all the way at the bottom, you'll find links to the registry settings for the internal GPS. If you follow those steps, and set your TomTom to Other NMEA Receiver, you'll be fine no matter what you did with the external settings.
mikechannon said:
The above advice is all pretty good. If this is the first time you have used tomtom then it can take a good while.
I am assuming tomtom shows the message "no valid GPS signal" after showing briefly the message "No GPS device". If so this is good. It means your com ports are set correctly.
There are two things to be sure of though:
1.
You have aclear view of the sky - especially on the first occassion you get a fix.
2.
Make sure you have a suitable map in the correct location. Obviously getting a fix when there is no map or the map is in the wrong directory will not succeed.
Did quick GPS work and give you a "valid until" date?
GPS test is a nice simple app that will show you the port number you are on so you can make sure tomtom is using the same one. BUT if tomtom only fails at the no valid signal stage then I think your ports are fine.
Finally, some fatal problems can occur if you have changed entries in the "external GPS" settings. This might (according to some folk) require a hard reset to correct. But try the above first.
Mike
Click to expand...
Click to collapse
I have the phone since yesterday! All settings are ok! I first had t-mobile ROM on my phone, flashed it over with a dumpped original dutch htc rom. (gps also didnt work at the original rom that was on it from t-mobile)
I live in de centre of the city. No clouds or anything..
Where can I find gps test? I tried GPS Viewer, didnt work at all, cant seem to find any ports. I did hard reset and still..it doesnt work..
Bram87 said:
I have the phone since yesterday! All settings are ok! I first had t-mobile ROM on my phone, flashed it over with a dumpped original dutch htc rom. (gps also didnt work at the original rom that was on it from t-mobile)
I live in de centre of the city. No clouds or anything..
Where can I find gps test? I tried GPS Viewer, didnt work at all, cant seem to find any ports. I did hard reset and still..it doesnt work..
Click to expand...
Click to collapse
GPS test here:
http://classic.pocketgear.com/software_detail.asp?id=24687&associateid=1224
It would help us to know the following:
1.
When tomtom is on does the amber led for GPS flash?
2
Does tomtom show "no valid GPS signal"?
3
Have you got a local map installed?
4
Did quick GPS download current data?
Mike
1.
When tomtom is on does the amber led for GPS flash?
Jep
2
Does tomtom show "no valid GPS signal"?
also correct
3
Have you got a local map installed?
uuh..west europe map..
4
Did quick GPS download current data?
it says after download "valid for six days and twentythree hours"
So I gues, yes
*thx Mike for helping me so far
Edit* gps test; shows "GPS is starting up"..(slow..)
Mmmm. Did GPS test show any bars in the end?
Mike
mikechannon said:
Mmmm. Did GPS test show any bars in the end?
Mike
Click to expand...
Click to collapse
Hi mike..
It works..It took some time (alot) but..It works..Hope it keeps working!
Thank you and wish you a happy new year!
Bram87 said:
Hi mike..
It works..It took some time (alot) but..It works..Hope it keeps working!
Thank you and wish you a happy new year!
Click to expand...
Click to collapse
Yep, first time around it can take a loooong time. After that it should be faster.
Happy New Year.
Mike
I've tried my gps in a load of places and the closest i've got my location to is 1500 m.....
I've done it alongside my friends N95 and he pretty much instantly got our location spot on with his google maps app, but my diamond couldnt get it.... left it for about 5 minutes before giving up!
Any help would be ace
Did you load the Almanach Data before?
e.g. Did you ever started QuickGPS before?
Have you clicked on the menu tab in google maps and clicked on the use gps button.
I havn't started quickGPS before, but yes, i did tick the use GPS button. It said searching for satelites in a small blue box at the top of the screen and then that disappeared.
I've never got a fixed location off of it letalone trying it at home, work, town, everywhere
Try the quick gps application first,it will help by getting the latest satelite information.
What version rom are you using.
Errrm, bit of a noob to the whole winmo scene, diamond is my first and i ony got that about a week ago....
How do you find out the rom version?
Also, another seperate question... is it worth updating ROM? I've been to the other forum and heard names like Bepe and stuff, but it doesnt mean anything...
boch501 said:
How do you find out the rom version?
Also, another seperate question... is it worth updating ROM?
Click to expand...
Click to collapse
Start > Settings > System tab > Device Information. Your ROM version is in there. If you have 1.35 or 1.37, then YES it is definitely worth updating. Whether you use a stock ROM or a cooked rom (like Bepe) is up to you.
I'm following this thread because I've had similar problems with GPS, even though I've already followed every advice I found when searching. It's not a high priority for me though. Anyway, I've played with both the Windows and Google GPS settings, every combination thereof, and everything else I can think of, but no real luck. At ONE point it was working, but then I flashed another ROM and never got it going again.
i got a ROM: 1.37.405.1
Radio 1.00.25.03
which means????
I had it working using the same ROM/radio versions as yours, AND I JUST GOT IT WORKING AGAIN! I know I tried this unsuccessfully since flashing 1.93, but this time it worked...
Leave the Windows GPS settings at default. In Google Maps GPS settings, set it manually to COM4 and 19200. Go outside, and tap Use GPS. It will say "initializing" for a while (give it time), and get a fix. After the first time it's slightly faster, but still seems pretty damn slow.
thanks, will try those settings tomorrow when it's slightly less cold, dark and rainy outside
cheers
hello all!
i really hate to post a thread on something thats probably already been solved with an easy answer but after 2 hours searching/head scratching and various tools/program downloads i cannot for the life of me get my kaiser's built in gps to work.
on the phone:
T-mobile (uk) MDA Vario 3
R: 1.27.12.32
(edit: i now know this to be an older german/russian version, any advice on a newer version appreciated)
G: 22.45.88.07
D: 1.56.00.00
ive tried setting to com4 with various baud rates (weirdly it hung when i tried it with 4800 and had to soft-reset so didnt work!) ive installed vaious programs (GPStest/GPS info/ GPS Gate etc etc) with all programs including tom tom 7 saying that theres no GPS device!
im pulling my hair out!
im guessing i'll need to update the firmware but hopefully not!
im on my knees for help!
(btw, thanks for reading this!)
quasi_mojo said:
hello all!
i really hate to post a thread on something thats probably already been solved with an easy answer but after 2 hours searching/head scratching and various tools/program downloads i cannot for the life of me get my kaiser's built in gps to work.
on the phone:
T-mobile (uk) MDA Vario 3
R: 1.27.12.32
G: 22.45.88.07
D: 1.56.00.00
ive tried setting to com4 with various baud rates (weirdly it hung when i tried it with 4800 and had to soft-reset so didnt work!) ive installed vaious programs (GPStest/GPS info/ GPS Gate etc etc) with all programs including tom tom 7 saying that theres no GPS device!
im pulling my hair out!
im guessing i'll need to update the firmware but hopefully not!
im on my knees for help!
(btw, thanks for reading this!)
Click to expand...
Click to collapse
The best way how to start gps is:
start quickgps and download the data, then if u have installed gps test, start it and wait for it to find the satelites. Dont change the options. Try to be outside and not in house or building.
no
the GPS is not being found, it is either disabled by the rom/radio or is Fubar!
simply downloading location data isnt going to get it to work!
unplug your computer, walk off into the distance, put it on the floor and tell it where it is.
does it turn on and boot to windows?
me thinks not.
quasi_mojo said:
no
the GPS is not being found, it is either disabled by the rom/radio or is Fubar!
simply downloading location data isnt going to get it to work!
unplug your computer, walk off into the distance, put it on the floor and tell it where it is.
does it turn on and boot to windows?
me thinks not.
Click to expand...
Click to collapse
I dont understand what do u mean. I think the mda cant have the gps disabled, I have htc kaiser and the steps that I wrote always works for me.
perhaps you are running different firmware/roms ???
having fiddled with gps gate some more, an amberish/red led on the right side has started to flash, but still no programs can find the gps! i thought tomtom7 had it when it paused on com4 but then it stayed like that for 15 minites!
Grrrrr
and sorry mikulec for the harsh response, this is really getting on my nipples now!
quasi_mojo said:
perhaps you are running different firmware/roms ???
having fiddled with gps gate some more, an amberish/red led on the right side has started to flash, but still no programs can find the gps! i thought tomtom7 had it when it paused on com4 but then it stayed like that for 15 minites!
Grrrrr
and sorry mikulec for the harsh response, this is really getting on my nipples now!
Click to expand...
Click to collapse
yes I have a different rom.
Another option - try to disable the assisted gps, for that u need to install schaps advanced config - that is a very helpful application.
There can be also one possibility that your gps is faulty.
i will try that and post back
cheers for your help so far!
quasi_mojo said:
i will try that and post back
cheers for your help so far!
Click to expand...
Click to collapse
U are welcome and I wish u luck.
ok, i disabled assisted gps
now all my gps programs are reporting
'could not open com7 it may be in use'
but nothing else happens!
quasi_mojo said:
ok, i disabled assisted gps
now all my gps programs are reporting
'could not open com7 it may be in use'
but nothing else happens!
Click to expand...
Click to collapse
Go to settings/system/external gps and tell me what settings(in the 3tabs-programs,hardware,access) u have set there.
Have you seen this Configuring Tomtom 6 thread linked to from the Wiki yet? If you've tried all of that and still it doesn't work, if it was me I'd hard reset and make Tomtom Navigator the only program I next installed then I'd test it again without making any configuration changes to it (at least the version I use, I don't know if other versions require any fiddling about to get them to work but TTN 6.032, Google Maps and Microsoft Live Search have all been just a case of once it's installed do a soft reset (not even sure this essential but I do it anyway) and then when I start them up, they work fine). Be very patient and give it ages out in the open to find satellites the first time after a fresh install/hard reset.
No GPS after official update
Hi,
I've got very similar problem : i've upgraded my Kaiser with a official rom/radio from Orange FR (wm 6.1, rom 3.31.73.0 FRE, radio 1.65.16.25).
Since this upgrade, my Kaiser cannot find the inboard GPS. I tried using Google maps, ViaMichelin, OrangeNavigation, and many GPS tools... none of them was able to find the GPS !
That sucks.
I called Orange 2 days ago, and i'm waiting for a response. I'll post there if any news.
Mathieu
yes please mathieu, would be good to hear what they suggest!
I dont know about others, but I've been having problems about my TTN6 acquiring gps signal. What I would have to do is to open my GoogleMap and scan my location there and then open my TTN6. Even the GoogleMap is having a hard time. I have my setting on Com4 and 4600.
I also use QuickGPS and always updated. Not really sure if it is because of cold start but i doubt it. There are times that I'd be using my gps already and I'd have to soft reset my phone(due to alignment issues) and when it comes back on, I would take awhile for it to find a signal(even though i'm on the same spot when I soft reset the phone).
Any help if appreciated.
rxdrift7 said:
I dont know about others, but I've been having problems about my TTN6 acquiring gps signal. What I would have to do is to open my GoogleMap and scan my location there and then open my TTN6. Even the GoogleMap is having a hard time. I have my setting on Com4 and 4600.
I also use QuickGPS and always updated. Not really sure if it is because of cold start but i doubt it. There are times that I'd be using my gps already and I'd have to soft reset my phone(due to alignment issues) and when it comes back on, I would take awhile for it to find a signal(even though i'm on the same spot when I soft reset the phone).
Any help if appreciated.
Click to expand...
Click to collapse
Try another radio! Radio has alot to do with your GPS fix, big time!
phone info
well i'm using pc.ultimate.v10 wwe and the 1.65.14.06 radio. any advice what combination?
rxdrift7 said:
well i'm using pc.ultimate.v10 wwe and the 1.65.14.06 radio. any advice what combination?
Click to expand...
Click to collapse
The tricky thing with radios is that they are different for every ROM, location and provider! So realy the only thing to do is try acouple out! Or go to the Ultimate Radio thread and read to see if someone from your area has recomended one or two! Here is the link to the thread! http://forum.xda-developers.com/showthread.php?t=393182
Where are you located? If you are by me than I can recomend a couple!
location
i'm southern california
rxdrift7 said:
i'm southern california
Click to expand...
Click to collapse
Ok, thats far away and much warmer than Minesota! Yea I dont know any for California! There should be some suggestions in hte radio thread though! Sorry, wish I could help you more!
not sure if there's a difference, but on my device, i have set it to com 4 and 9600 and things seem to work fine here in Malaysia and in my travels to Indonesia.
my first GPS lock took some time and doing, and i finally got it working after i ran this "GPS Test" program. Forgot the original thread & poster i found it here, but here's a post with the same. http://forum.xda-developers.com/showthread.php?t=374349
I had a similar problem. Not being comfortable flashing another radio, I tried a program called Franson GPSGate. It allowed me to use mulitiple programs that utilize the GPS signal at the same time through the same COM port.
I also get fizes in under 15 seconds when I have GPSGate running first. (it primes the GPS signal and keeps it ready for programs that need it). Just another option.
agreed
GPSGate is a great program. Trialware though. I have started tinkering with a program called "AmazeGPS" that will give you turn-by turn directions, and update your route as you travel, unlike google maps. definetly not as handy as google maps for local searches though. best used if you have an address already. The Radio on your phone does affect GPS, as well as all the other connectivity areas (data, phone, bluetooth, and even wifi, i think). if you are looking for something with good connectivity, 1.71.09.01 is an awesome choice. the tradeoff is that it is a bit of a battery hog. i am assuming that you will be using this in a vehicle or something, as gps itself is a battery hog, and if you plan on using it frequently, you probably have it plugged in somewhere. I live in Arizona, by the way. hope this helps!
Try the attached program, if you are able to see the satellite signal...
I live San Diego, using the PC.Ultimate.V16 rom with Tomtom7. I have my GPS configuration with other NMEA GPS, 57600 baud rate, COM4 and I get a connection in 15 seconds.
I think this question was just asked in another thread.... use GPSTest and then when it acquires a signal open up TTN6 or 7 annoying I know but it works for quite a few people
Excellent
Nice the GPStest, now i try to make functionally mi Googlemaps...
Tks
Here is my advice... I get that same problem sometime in my TomTom (I used to use 6.. but now using TomTom 7)... I installed that GPS Toggle that is a start menu item... It is nice.. it says GPS OFF or GPS ON.. When you turn it on, it says "SEEK : XX" XX beign the number of sats it is searching for... Then when it gets a lock it says "LOCK : XX" and also shows how many "bars" you have.... Sometimes I use it to just test out the GPS function w/o loading TomTom... But I have also found if I turn the GPS ON with it before loading TomTom it locks on faster (a lot faster)... I think it sort of jump starts the GPS chip to lock on faster... It is the same software you have to use if you have a HTC Mogul and want to use TomTom (For some reason TomTom doesn't see the GPS chip in that phone w/o this little program or something simmilar)...
I attached the one I use as a cab.. Just copy it over to your storage card... use file explorer and run the cab file... Then after it is installed do a soft reset... You may have to go into the Today screen options in settings and put a check infront of it to see it on the screen... Hope this helps
rxdrift7 said:
I dont know about others, but I've been having problems about my TTN6 acquiring gps signal. What I would have to do is to open my GoogleMap and scan my location there and then open my TTN6. Even the GoogleMap is having a hard time. I have my setting on Com4 and 4600.
I also use QuickGPS and always updated. Not really sure if it is because of cold start but i doubt it. There are times that I'd be using my gps already and I'd have to soft reset my phone(due to alignment issues) and when it comes back on, I would take awhile for it to find a signal(even though i'm on the same spot when I soft reset the phone).
Any help if appreciated.
Click to expand...
Click to collapse