Hope someone can help. My first vario 3 broke the other day and have been given a new one.
I had downloaded an application from this site that allowed me to ontrol screen size, turn on gps with pictures and most importantly seemed to fix the problem of receiving email when the screen was off.
The problem is i cant find it now and didnt save it. Can anyone help!!!
Related
I have an O2 XDAIIi that turns on and just stay at aligning page and X point just keeps moving around and around after I press it. It will not go pass that page. Anyone knows how to repair this problem, please help...Thanks
I have the same problem... Anyone know how to solve???
xda11i screen align freeze
I have the same problem. so do many others. i have seen no reasonable fix. i have gone into bootloader mode and hard reset as suggested elsewhere but no good.
please help. Anyone????????
i have a same problem...pls help !!!
Thanks
Get it looked at, could be a touchscreen problem.
Reflash the Rom, if data got corrupt, it is electrical after all........
I reflashed many times, but same effect :S The touch screen is working, because when i touched the cross moving, but repeated again.
Thanks anyway.
Hi there,
Orange have just replaced my TyTn II (much prefer the "Kaiser" name, so I'll use that ) because I told them about a problem whereby my alarm doesn't go off in the morning because the Kaiser is in sleep mode, and when I bring it out of sleep the time is out by many, many hours. Sometimes the time corrects itself, sometimes not, until I plug it into my laptop and ActiveSync updates the time.
Anyway, Orange diagnosed this as a fault and promptly sent me a replacement - no complaints there. But I told them on the phone I didn't believe it was a hardware issue, rather an issue with WM6, and sure enough the replacement has the same problem!
Has anyone else experienced this issue with the time on the Kaiser? I need this phone to be my alarm clock, not to mention relying on it for appointment reminders etc. so the time is an essential function, and I'm considering ditching the device!
(All this after installing the apps listed in this forum, thanks so much to duttythroy! )
surely someone has the same issue as me! please help...
A quick search of the forum would find you this...
http://forum.xda-developers.com/showthread.php?t=348595
And also make sure your PC/laptop that you sync with is set for the same timezone as your phone as the time is updated when you connect.
Hope this helps.
thanks for the reply, i had that setting unticked to see if it had any effect, i'll see if it works out tomorrow morning and post back...
My Tilt was working fine while I was listening to music over my bluetooth headset. Suddenly the display went black and I am not able to get it back. I cant even see the startup screen with the AT&T logo. The phone is working perfectly fine and I am able to play music, send and receive call and connect it to my PC and see the display on my computer through MyMobiler. One thing I noticed is that I can see very very feeble display on my screen without any colors. I ordered a replacement screen and placed it on my own but still the same behavior. I cant go to AT&T as it got an unlocked phone and have voided the warranty since I opened it to replace the screen.
Any help or guidance from experts of this forums would be really appreciated.
Thanks,
Shashank
You probably tried this already, but just incase....but did you try to turn up the backlight setting (Settings->System->Backlight) and see if that made any difference?
scowltura said:
You probably tried this already, but just incase....but did you try to turn up the backlight setting (Settings->System->Backlight) and see if that made any difference?
Click to expand...
Click to collapse
I tried it already but it dint help. Also the display setting take effect only once yo phone has crossed the startup screen. Dont know why I am not getting any display even on the very first startup screen.
Sounds like a bad backlight
No solution yet
Me and another guy are going through the same thing. So far, no answer has been found to our problem. I also bought this phone thinking all it needed was a new screen, come to find out after I replaced it that it was doing the same thing. It seems like this problem only effects a very small percentage of Kaiser users.
Hi all,
I have a T-mobile wing and it has the stock rom on it. Also, it is not hard spl anymore. I used to have open touch 6.1 lite diamond. The phone turns on and makes the keyboard sound. When it turns on there is a white screen but if you move the screen out so that the keyboard is visible you can see a discolored screen with windows mobile on it. Also, you cannot use the touch screen. The farthest you can get is the welcome screen that has the align screen but it wont align. Would anyone be kind enough to please help me with this issue. I greatly appreciate the help and great thanks to all in advance. I have read around in the forums and it says to buy a new screen, a digitizer, or fix the display drivers. I currently think it might be a software problem but I do not know where to start. Again any help is appreciated and thank you all again in advance for your help.
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
obsidian06 said:
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
Click to expand...
Click to collapse
Thank you very much for responding. Yes, I have let the unit warm up. At first this problem went away but it came back after. What do you mean by display drivers? Do you think I should hard-spl again and try a new rom? And if that doesn't work, should i open up the unit and see if the cable it tightly attatched? Before the discoloration, I was able to use my phone with open touch 6.1 lite, but there was a white screen when the keyboard was not visible. Also, when i moved the keyboard, the phone would work by allowing to me call and text but it would freeze a lot. I hope this clarification helps.
Mod please move to herald section because this topic may or may not pertain to herald mobile 6.
Would anyone please help me I would greatly appreciate any advice, thanks in advance to all. p.s. I added pics and the touch screen doesn't work, the physical keys kind of work when the screen is viewable.
Reply please!
did you ever figure it out!? oh wow finally i found someone with a similar problem. my wing was in my pocket at work when the first similar signs arose. ITS PRACTICALLY BRAND NEW! it did that for a while and now the screen is just all white=( PLEASE help! anything would be good. i just want to know if its fixable or should i just get a new phone. you can email me too at [email protected]
Hello, last time i bought HTC Diamond. The problem is that i need align screen too often. Sometimes it can work properly very long time but sometimes i need align screen few times in 15 minutes. I don't have guarantee for this phone no more. Anybody know how to solve this issue? Thank you.
I have got the same problem; my htc diamond lost the calbration after few clicks. One member of this forum said that I have to change the digitizer
Have a look to my post.
no solution for this, buy new display, and chage it... You can find it on ebay and they will send you display and other tools which you need for replacing display...
Yup I had the same problem and got the screen replaced. A lot of people have reported this.
If your phone is under warranty you can get the screen replaced for free.