Currently it takes about 5 or 6 steps to set the volume level from 0 to max via hardware buttons (hands free buttons). If you try to control it via touch, you can actually set it very precise...
I wonder now if you can make the hardware buttons to change the volume level using smaller steps so that you can adjust it almost as precise as with the touch control...
Any registry tweak? Any idea?
STYLUS!!
Jorlin said:
Currently it takes about 5 or 6 steps to set the volume level from 0 to max via hardware buttons (hands free buttons). If you try to control it via touch, you can actually set it very precise...
I wonder now if you can make the hardware buttons to change the volume level using smaller steps so that you can adjust it almost as precise as with the touch control...
Any registry tweak? Any idea?
Click to expand...
Click to collapse
Well...with the stylus you can control your volume even more precise, you just have to tap the screen with the stylus and drag your volume to where you want it to go....it's a little bit more precise than the hardware buttons...to be honest...i don't know if there's any software or so ???
good luck!
EDIT: I noticed that you already mentioned the method above, which I told you...sorry....sorry...sorry....
Pietje_1985 said:
Well...with the stylus you can control your volume even more precise, you just have to tap the screen with the stylus and drag your volume to where you want it to go....it's a little bit more precise than the hardware buttons...to be honest...i don't know if there's any software or so ???
good luck!
EDIT: I noticed that you already mentioned the method above, which I told you...sorry....sorry...sorry....
Click to expand...
Click to collapse
Haha... when I read the mail notification I already planed my counterstrike... good for you, you realized your mistake... your horrible mistake... *muahahahaha*
No, seriously... anyone who knows? Any reg tweak?
Jorlin said:
Haha... when I read the mail notification I already planed my counterstrike... good for you, you realized your mistake... your horrible mistake... *muahahahaha*
No, seriously... anyone who knows? Any reg tweak?
Click to expand...
Click to collapse
hehe....allright than...I will also join you with this question...because indeed sometimes that also bothers me...I just want to have more control on my device....
Does anyone have an idea?
would be nice to know as well.
Nobody??
i would like to know this too,
Anyone out there?
Or are we the only ones left alive?
there are files in windows dir.
hello, just wanted to post that there are files in windows folder named volym_20 volym_40 volym_60 and so on, is it possible that they got something to do with it?
Someone figure this out!!
Does anyone have a clue how to do it?
Related
I can't adjust the volume with the scroll wheel during a call. I am sure it worked in the past. Any help? Thanks.
Do you can adjust system volume by the scroll? Please let me know beacuse i can't make anything by the scroll...
you probly have the large title bar thingy installed, that seems to mess up the volume control. Simple solution is to remove it. I was never a big fan anyway. I am sure someone must have worked out a solution by now. I cant be arsed to go looking for it though as i dont use it.
Hope this helps.
Rob
rjefferis said:
you probly have the large title bar thingy installed, that seems to mess up the volume control. Simple solution is to remove it. I was never a big fan anyway. I am sure someone must have worked out a solution by now. I cant be arsed to go looking for it though as i dont use it.
Hope this helps.
Rob
Click to expand...
Click to collapse
Thanks Rob,
I removed the large title bar and now the scroller works.
Why get out a Large title bar. My tytn2 is a orange poland.
Sorry if it was already covered elsewhere, - is there any way to remap auctions for these side buttons on Diamond ? I don't change volume level that often, all done through profiles, imho up/down arrow or scroll function would be much more beneficial ...
Update: AEButton Plus does the thing perfectly, thanks to Geekess for the hint
volume up/down is OK but long press may be very useful for Explorer, task manager etc...
In other words configurable .. would be great for camera too, not easy to make pictures with central button, not stable enough ...
I did not follow development news for previous HTCs, so not sure if it was ever done before ...the fact is that these buttons are not available from Settings (
You can use PQZ II for remapping the volume key. Try to google it.
csc0503 said:
You can use PQZ II for remapping the volume key. Try to google it.
Click to expand...
Click to collapse
thanks mate, you are a star
http://www.nicque.com/PQz/PQzII.htm
no version for diamond yet, will play with WM6 version tonight ...
hertc said:
will play with WM6 version tonight ...
Click to expand...
Click to collapse
well, does not look good at the end, maybe these are hidden features, but I could not find a way of how to use the volume buttons independently (they work as Ctrl or Alt, no problem here, but I wanted to use them as one button - one action, not two buttons - one action). Another problem, Up/Down or Scroll are not available for selection as actions ....
So it should be possible to change that, the matter of finding the right program now ..
Wish there were more buttons on Diamond, or at least proper navigation buttons ...
Hmm... for me it does not work, get the message:
keyboard hook faild
any suggestions?
What works for me is AEButton Plus (payware, no affiliation). I have reconfigured my volume buttons to single press = arrow up/down and long press to volume. The program has a nice function: you can choose to let the volume buttons have their default behavior during a phonecall.
I'm using the trial right now, but if I can't find a freeware program that has the same functionality I will probably buy this.
May I ask how you've gone on with AEButton? I'd be interested to hear your long(er) term experience of having used it as it sounds like exactly what I want/need.
Mathew
all good, does what it says, configured it once and just using since ..
Tried latest HButton 2.3, but think it is not compatible ... anyone else tried it?
I dunno if I'm only one who has this problem but when I'm occasionally on sun I can't see nothing on my Kaiser and it's really difficult to setup backlight brightness on touchscreen which u can't see.... So I've been looking alot if there is some utility which I can link with button or gesture and I haven't found anything... So I've wrote my own utility. Feel free to use it as well if u find it useful -> http://lobster.ic.cz/?page=bl
is this useful or is there easier way to do that??
Been searching for an app like this for a week.
Works great!
Thanks.
Here's another program that gives you a today plug in for it:
http://forum.xda-developers.com/showthread.php?t=412896
I'll b trying yours tho as I like the idea of UL with icons for up and down
Cheers,
Matthew
I made a cab with this program mapped to the PTT button. I have a AT&T Tilt, Im not sure if your phone has a PTT button or if its called something else or whatever.
With this, just run the cab then I tap the button and it changed the brightness really quickly, no menu or anything, I love it! If I walk out into the sun I just tap the button 3 times and my screen is bright.
Lobsterii, I love this program thanks a ton!
I'm glad that I could helped u out guys... actually there might be more funny stuff possible only if HTC release some documentation on theirs DLL files cos it's pain to guess arguments...
you did it all by guessing? I figured you would have decompiled the dll.
Truly excellent! I have also been looking for something like this for a long time.
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Thanks again for a useful app!
you did it all by guessing? I figured you would have decompiled the dll.
Click to expand...
Click to collapse
I've read some forum where someone pointed out that backlight function should be in some dll by HTC dunno where it was... Then I was googling "dll find export function" and I've found prog "DLL Export Viewer" which can show function names in dll. Unfortunatelly there is generally impossible to find out how many/what arguments the function has. So I've found function name like HTCUtilSetOnBatteryBrightnessLevel and I've simply try prototype int HTCUtilSetOnBatteryBrightnessLevel(int); but it crashed... so I keep going like int HTCUtilSetOnBatteryBrightnessLevel(int*); and it worked... voila...
pudifoot said:
Truly excellent! I have also been looking for something like this for a long time.
Click to expand...
Click to collapse
thx alot...
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Click to expand...
Click to collapse
done. + it's now compiled as an release version so it actually has 50KB less than old version... enjoy it's at the same place instead original files http://www.lobster.3web.cz/bordel/bl/index.htm...
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Thanks for implementing the feature I was looking for. A perfect application - it's small and fast, and it gets the job done with excellence.
Thank you. Works perfectly.
silentanvil said:
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Click to expand...
Click to collapse
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
lobsterii said:
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
Click to expand...
Click to collapse
Awesome! Thanks so much! I've also been looking everywhere for something like this!
Awesome!
Well done! I've been looking for ages for something to do this.
How to use bl02...
Something from lobsterii that helped me:
create link in Total commander (file manager) I think its in options "File -> >>>>> -> Create shortcut" then I have another file bl02.lnk then I open properties of the lnk file, I click tab shortcut and put the text of path into "" and after it I wrote parameters so it looks like
"\Program files\bl\bl02.exe" 1 3 9
OK dumb question and first time posting so don't slaughter me. If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct? Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display? If you get far enough to open the utility then its not that hard to move the brightness up. Sorry for the dumbness of the question.
volleykinginnc said:
If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct?
Click to expand...
Click to collapse
my bl02.exe doesn't put any button anywhere... it's just app which actually toggle brightness. U can try to run it via file explorer it should change brightness...
volleykinginnc said:
Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display?
Click to expand...
Click to collapse
There is plenty of programs to map this app to buttons, finger swipes and some other crazy stuff like voice commands etc.. For example I'm using FTouchFlo (u can use FTouchSl which is easier to configure) and map backlight change for finger swipes... Most easy way is just copy blXX.exe to /Windows/Start Menu/Programs/blxx.exe and then go to Start->Settings->(tab)Personal->Buttons and link it with some buton...
I'm just now at work so have no time for more explanation... but Once I get home I'll create some FAQ at download page cos... cos it'll be easier for all of us
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
volleykinginnc said:
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
Click to expand...
Click to collapse
I'm sure he won't be able to bypass A_C's S2U2, but (assuming you have a Kaiser, you didn't say) if you enable dpad in S2U2 you can always hold your right dpad button to make sure S2U2 is unlocked, even if you can't see the screen, and then hit the button for the "bl02.exe 9" link.
Ha ha...you guys are awesome! Right Dpad enabled and now it works like a charm even in the brightest sun!! Thanks for the great application...makes a big difference in usability.
Some of you experts ought to make a list of these application gems (this program/kaeser tweaks etc) to make it easy for the noobs like me. This is good stuff!!
I noticed that despite changing in call volume settings and system volume settings, the volumes are linked together.
Has this always been the way? I seem to recall my WM6 phone (Hermes) remembering in call volumes and keeping it seperate from the system volume -but I may be wrong.
I want to lower my in call volume, but the hardware volume buttons don't seem to make that much of a differnce - and not to mention they adjust the system volume as well.
I have read through all the other volume related threads I can find. I think this is the first time someone actually wants to lower the diamond's earpiece volume!
Effectively you have 3 volumes. Unless you are in a call then the volume buttons only give you access to the system and ring volumes. As far as I know you can only adjust the in call volume in call (there will be a registry option also but I don't know where sorry).
Anyway when you start your call before you put the phone to your ear (and the screen goes off) press volume up or down and it will change your call volume.
I figured out what it was... it was due to me disabling the diamond phone skin.
You lose volume functionality.
And if the settings is "silent", even the music player, via earphones, is silent?
RandomDude said:
I figured out what it was... it was due to me disabling the diamond phone skin.
You lose volume functionality.
Click to expand...
Click to collapse
Can you elaborate?
I've disabled the Diamond skin yet I am able to independently adjust the in-call volume... in-call. System/ringer volume is adjustable at all other times.
Mathew
MJNewton said:
Can you elaborate?
I've disabled the Diamond skin yet I am able to independently adjust the in-call volume... in-call. System/ringer volume is adjustable at all other times.
Mathew
Click to expand...
Click to collapse
If you disable the diamond dialer skin and have HTC volume control enabled you will not be able to alter the in call volume. To adjust in call volume using default windows dialer skin you also have to disable HTC volume control.
Ah, yes, I do seem to recall having disabled the HTC Volume too with DiamondTweak.
Mathew
dscannell said:
If you disable the diamond dialer skin and have HTC volume control enabled you will not be able to alter the in call volume. To adjust in call volume using default windows dialer skin you also have to disable HTC volume control.
Click to expand...
Click to collapse
Hi guys,
I do not want to use "Diamond dialer Skin" because of the S2U2, so I have disable it. However, there is no way to alter the in call volume (I have activate and deactivate HTC volume control with Diamond Tweaker, but no way).
Any help?
Thanks in advance
No one has solve this trouble? It is making me crazy!
Why does the dialler skin interefere with S2U2?
simcarloc said:
Why does the dialler skin interefere with S2U2?
Click to expand...
Click to collapse
Each time a call is incoming, in the first few seconds the dialler skin appears. After that, the normal S2U2 screen appears again (with "slide to answer"...). If you touch accidentally the option "Answer" of the dialler skin by accident in these few seconds, it will answer the call.
I have added something in the registry (to be honest, I can not remember right now) that it was supposed to fix this trouble, but no way...
dscannell said:
If you disable the diamond dialer skin and have HTC volume control enabled you will not be able to alter the in call volume. To adjust in call volume using default windows dialer skin you also have to disable HTC volume control.
Click to expand...
Click to collapse
Does that mean the volume buttons will no longer work during a call but you will get a volume adjuster on the screen...or will the volume buttons still change the in call volume. dont know about anyone else but I find the volume buttons a bit too fiddly and 'sunk' too far...probably nicer to look at though...
I mean that the volume buttons will not work any more. The only way they work in my Diamond is activating "Diamond Dialer Skin", but with this, I get the S2U2 problem...
RinCEWinG said:
I mean that the volume buttons will not work any more. The only way they work in my Diamond is activating "Diamond Dialer Skin", but with this, I get the S2U2 problem...
Click to expand...
Click to collapse
And a big memory comsumption!!!!
I've disabled phone skin too... and have the same problem. Hard to find the good key in the registry!
Some help are welcome!
THX!
No one has solved this problem?
It is not a big problem, but it is making me crazy...
try this regkey
I maxed up my in call volume, and found this DWORD regkey to be changing to FFFFFFFF (8 F's hex value).
Can you try?
HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides\SavedInCallVolume
pwhooftman said:
I maxed up my in call volume, and found this DWORD regkey to be changing to FFFFFFFF (8 F's hex value).
Can you try?
HKEY_CURRENT_USER\ControlPanel\Notifications\ShellOverrides\SavedInCallVolume
Click to expand...
Click to collapse
Thank you very much for the answer.
Anyway, I do know how to configure the volume (I use a "Profiles" software that can adjust the volume). The point is to be able to change the in call volume during the call.
To be honest, I can hardly believe that no one has deactivate "Diamond Skin Phone" and had no trouble with this
I'm using the dialer skin, but when i am talking with someone, adjusting the volume up/down, it always reset it to lowest. Any advice?
Hi,
i noticed that automatic backlight is no so convenient:
the night, i found the level too bright, so i desactivate the "auto feature"
but now to change it, i have to go to start/settings/plus/etc
not so easy, if you are outside with a beautiful sunlight and you forgot
to increase the level after your last night ;-)
is there an easy way to up/down like with the volume?
perhaps associate with AE button plus, long press with volume up/down
but in this case wee need an exe/link to associate to them)
any idea ?
thanks
regards
i am using ageya G-Light for automatic light level, it is a suefull free tool.
http://www.ageye.de/index.php?s=glight/screens
gwassef said:
i am using ageya G-Light for automatic light level, it is a suefull free tool.
http://www.ageye.de/index.php?s=glight/screens
Click to expand...
Click to collapse
Many thanks, exactly what i wanted for tweaking
edit:something i installed might have messed up the keyboard popping up, it's back to normal now The only worry is that in the "exception settings",
i cant type anything
as for example copilot.exe, because the keyboard doesnt pop up, and its icon isnt present in the bottom part of the screen , i tried to copy/paste from notepad, but when i tap(long press) in the programs field, i am not proposed
(select, paste etc)
Do you encounter that (ps: its not the only application to do that)
Click to expand...
Click to collapse
regards
you have to select new first, then you will have a line to write in it what you need
gwassef said:
you have to select new first, then you will have a line to write in it what you need
Click to expand...
Click to collapse
hi,
something had messed up the keyboard popping up, it's back to normal now
thanks