Database Develop

Slow landscape/portrait change

got kaiser 2 weeks ago, overall great phone but it is a little slow.
particulary when oppening the keypad, it takes about 5+ seconds to change to landscape mode. and when it does it still slow (slow responce, particulary from keyboard) for another 10-15 sec.
is there any solution to this problem?
thanks

Thats indeed strange, mines responses instantly.
have u tried increasing font, glyph caches? That may help a lot!
FYI (experiment with numbers to get your own best results)
This stuff is included in kaiser tweak, but you really cant modify the numbers to your own!
Increase font cache
To increase the font cache, speeding up font rendering at the cost of a bit of memory:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 16384 (DWORD decimal)
To change it back to the default:
HKLM\SYSTEM\GDI\GLYPHCACHE\limit = 8192 (DWORD decimal)
You can set the value to pretty much anything you like
Enable FileSystem cache
To enable the FileSystem cache, speeding up overall performance at the risk of the cache not being written on a sudden reset:
HKLM\System\StorageManager\FATFS\EnableCache = 1 (DWORD decimal)
To disable again:
HKLM\System\StorageManager\FATFS\EnableCache = 0 (DWORD decimal)
Note that by default, the cache size is zero, and you will see no effect. See "Increase FileSystem cache" to incease the cache size
Increase FileSystem cache
To increase the file system cache:
HKLM\System\StorageManager\FATFS\CacheSize = 4096 (DWORD decimal)
To return the file system cache to zero:
HKLM\System\StorageManager\FATFS\CacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like
Increase FileSystem filter cache
To enable the file system filter cache, speeding up overall performance with file mangement:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 4096 (DWORD decimal)
To return the file system filter cache to zero:
HKLM\System\StorageManager\Filters\fsreplxfilt\ReplStoreCacheSize = 0 (DWORD decimal)
You can set the value to pretty much anything you like

hmm, i actually have those tweeks enabled, and have not noticed any change in performance of landscape mode.
what ROM do you have on your kaiser? if it's standard then which by which company?
i have UK vodafone one.

Today plugins
Have you installed any 3rd party today plugins? More importantly, are they on?
I had (still have, in a way... bear with me) this problem with SPB Diary.
Without it being represented on Today, the reorientation portrait-lanscape-portrait took maybe 2-3 seconds, with keys being immediately responsive. With Diary ON, it's closer to the 30-second mark, and keys remain unresponsive for another 10-15 seconds. GAAAAAAAAAAAAHHHH!!!
(and this even on a newly-HR'ed machine, mind you)
The problem went away once I started using SBSH Pocket Breeze instead, although it irked me having to buy another app to do the same thing, sigh...
What's funny is that my boss is using the very same incarnation of Kaiser and he has no problems whatsoever with SPB Diary...
So, I say you switch off everything bar HTC Home and try again. If it works well, then start experimenting with plugins, you will identify the culprit.
If it's NOT that... sry, no clue.

Thanks for the suggestion.
just tried disabling all today plugins, didnt do a thing.
it takes exactly 3-3.5 seconds to switch. keys become responsive pretty much instnatly but dont show up on screen for 4 seconds.
i did have spb diary installed but i hated the way it took up most of the screen so i deleted it.
i just need a simple, today/tomorrow meeting list that's all.
will give pocketbreeze a try.
i'm suprised to learn this is not a general prolem, i've seen 3 kaisers and all are slow when you open up the keyboard, but if some people dont have this problem then surely there is a way to fix it.

mensis said:
if some people dont have this problem then surely there is a way to fix it.
Click to expand...
Click to collapse
yup.
use their stuff.
sorry, but CNRM

I got the same problem, 3-4 sec for switchin portrait to landscape or viceversa.
I notice it as I used a PalmOS device previously and everything was almost istantaneous there.
It is really annoying.
Mine has ROM v 1.56.408.5
Any solution / patches?

Original OEM ROMs are known to have a lot of "bloat" installed that can cause overall system lag.
I am running NoThrills WWE based off of the most "official" WM 6.1 ROM to date, and of the 20+ ROMs I've flashed to date, it is the fastest performing ROM by far.

non stock
I'd flash new rom and radio and before installing cabs and changing settings to test the performance besides the normal performance settings and see what that does.

TIP: How to make the Screen much more sensitive

You need to change the Following Registry Value:
HKEY_LOCAL_MACHINE\Drivers\TouchPanel
Value = PressureThreshold
Change from the default dword:00000027
or 34.
to dword:000000f0
or 240 in decimal.
This is drastic improvment.
Enjoy,
Nadavi.

Nadavi, my value is 34 not 000000027?
How come?

What exacly improves?
Do you meen if you press some thing that you have to press less hard before it accepts it as a press???

Seems to make things smoother !

is this only for the diamond??? i know that its a diamond thread but can this work on a Touch?? my pressure threshold is 21977

CorruptedSanity said:
Nadavi, my value is 34 not 000000027?
How come?
Click to expand...
Click to collapse
nevermind... my mistake

Nadavi, thanks for clearing that up.

Awesome.
Thanks heaps,
Helps overcome the slight lack of sensitivity when using the included screen protector.
Now I get less accidental 'clicks' into my contacts when just trying to flick thru them.
Cheers,
ccg

In my TD there is only a string key, not a dword key.
So I changed the string name to "PressureThreshold Original". If the comming change is not working then you can easely change it to the original situation.
So I made a new dword key:
HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold\
to dword: 240 in decimal.
And it works. Indeed better performance.
But now my question is; wat is the string doing with value 60... Iny ideas?

Does increasing the number make it more sensitive or less sensitive? I'm having trouble pressing the OK in the corner of the screen - is my screen faulty or "too used" or can this fix it?

gracias ..

MS Voice Command Volume

I have just started using ms voice comand, but the volume is very low
I have looked about and done a reg hack to change
HKEY Current User - Control panel - Sound Catagories - Voice Command -
Change:
Attenuation Catagory - Value 1
InitVol - Value 3
and also tried
HKEY Current User - Control panel - Sound Catagories - Voice Command -
Change:
Attenuation Catagory - Value 2
InitVol - Value 8
but neither of these make it any louder
anyone using voice command, that has been able to fix this on a diamond?
I am only using it on the speaker and not a bt headset
Also i noticed that the speach is not as clear as cyberon VC, as it is alot faster. But i prefer the features of MSVC with regards reading the email subjects and caller id

7. *Adjusting Volume of Announcements -* There are two values that seem to influence the volume of announcements. They are stored within the following key:
*HKCU\Control Panel\Sound Categories\Voice Command1*
The values are:
*AttenutationCategory*
*InitVol*
There are apparently different default setting based on your device. In general the values are generally around 1-4 for *AttenuationCategory* and 1-5 for *InitVol*. Some research shows that setting *InitVol* to 40 and *AttenuationCategory* to 1 provide the best results. In my testing I have found the *InitVol* to do nothing. The *AttenuationCategory* definitely does something, it seems the lower the number the lower the voice. When set it to 0 the announcements were very faint. Setting it higher made them higher, although I can't say that anything over 4 or 5 got any louder.
In my findings I would say set both of these to 5 (I have read some other posts that lead me to believe setting InitVol over 5 is pointless, in addition, the posts that recommend setting it to 40 don't specify if that is decimal or hex).
Got this out of the Kaiser Forum.

do i need to restart the device for these settings to become active?

What I do is shut the phone down...Power Button, and then take out the battery for a second or two, then I put the Battery back in and start it back up. Some reg settings you change revert back when you just soft reset.

I would love to make voicecommand louder BUT i can't. I changed the values but the volume is still down....
How do i do???
Someone???
I read in one post that if I remove S2A, the voicecommand will be louder...but i still don't know how to remove S2A....
HEEEEEELLLLP!!!

The loudest volume level on HTS HD2 i got with:
indows Registry Editor Version 5.00
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\InCallFeedback]
"AttenuationCategory"=dword:00000001
"InitVol"=dword:00000005
"DefaultSound"="\\Windows\\HTCTone\\Midi2Wave_079_4098.wav"
"Directory"="\\Windows\\"
[HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce]
"Category"="InCallFeedback"
"Sound"="\\Application Data\\Volatile\\\\TTSCallerID.wav"
"Script"="p"
Not tested on BT headset yet.

User Agent Settings

Hi All,
It's a long story but I've messed up some registry settings on my TyTn 2 (Vodafone V1615).
Would be most appreciated if someone could post default registry values for TyTn 2 (or V1615), for the following registry settings:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
Version = ????
Platform = ????
Desc = ????
Default = ????
UA-Language =????
Compatible = ????
I'm tempted to use the "Same As Pocket PC" template that's in the registry for the above, but I'm curious to see if the Tytn 2 defaults are the same as the Pocket PC template.
Could also do with settings for:
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
CustomBase = ????
Custom = ????
KaiserTweak will fix those, but also interested to see what the defaults are (especially for V1615)
Thanks for any info, it's VERY much appreciated, thanks.
Cheers,
Andy.

[TUT] Build.prop Modifications how to !

Hello all from research and test o my rom dev discovered this and want share it with all can help ^^
The following lines in the build.prop file can be added and edited to change several properties in your device:
debug.sf.hw = 1
Render UI with GPU (relieves pressure on CPU)
dalvik.vm.heapsize = 32m
Set size of Dalvik VM heap (how much RAM each instance of the VM is allowed); depending on how much RAM that is available to a device, this can be increased.
persist.adb.notify = 0
Stop debugging icon from appearing in status bar
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
persist.sys.use_dithering = 0
Do not use surface dithering (surface dithering improves image quality)
debug.sf.nobootanimation = 1
Disable boot animation
ro.HOME_APP_ADJ = 1
force home launcher into memory
ro.sf.lcd_density = 240
Set screen density; change according to your device or what suits you, a lower value will display more but may be too small to use on a device with a smaller screen. Also note that changing the pixel density will make some applications in the new market ‘incompatible with your device’.
mot.proximity.delay = 150
Lower to fix black screen after calls issue
ro.telephony.call_ring.delay = 0
Decrease dialling out delay
ro.gsm.2nd_data_retry_config = max/_retries=3, 2000, 2000, 2000
Change MMS APN retry timer from 5s to 2s
wifi.supplicant_scan_interval = 120
ro.ril.disable.power.collapse = 0
pm.sleep_mode = 1
Increase battery saving potential
ro.com.android.dataroaming=true
Enables data-roaming by default in the build
ro.com.android.dateformat=dd-MM-yyyy
Changes default date format to day-month-year
ro.config.alarm_alert=*.ogg
ro.config.ringtone=*.ogg
ro.config.notification_sound=*.ogg
Changes the default sounds for each item. Must correlate to ogg files available in /system/media/audio/
ro.build.display.id=NAMEOFROM
In Settings>About Phone, it lists the name of the build number. This is where you set it.
ro.product.locale.language=en
ro.product.locale.region=GB
Sets the default region and language. You must have the correct letter combo, and the language must be available for this to work.
video.accelerate.hw=1 or 0
Whether to use hardware acceleration to render videos, doesn’t work on all devices​

Some of those lines are missing from my build.prop. Can I place them anywhere in my build.prop or not?

jayrome876 said:
Some of those lines are missing from my build.prop. Can I place them anywhere in my build.prop or not?
Click to expand...
Click to collapse
yes after all line add thos you want