Looks like I've bricked my P3600. After a failed upgrade it's now stuck on the HTC start up screen, neither a soft nor hard reset solves it.
It doesn't become visible to the PC or ActiveSync just stays frozen on the screen with the HTC logo.
I've successfully flashed it before to WM6.
I've tried the suggested tools to unbrick it but since the PC can't see it they fail.
Is there anything I can do or is it dead?
Have you tried entering bootloader mode and flashing from there?
Since I can't establish a connection from the PC to phone I don't know how to get it into the bootloader
Check out the Trinity Wiki here on XDA
How to get to bootloader
Thankfully got it sorted. I finally managed to get it to enter the bootloader using the power+camera+soft reset method. Phew!
Thanks for the help and suggestions.
Tim.
Related
Hi folks,
Very strange: I tried to connect to the PC with ActiveSync 4.1 and the BA in the bootloader mode. Didn't connect. Tried a couple of times, reinstalled AS etc. No chance.
Therefore I wanted to be sure, there is no connection problem, I started the MAUpgrade tool, which connected successfully and showed the EPROM versions on the screen. So I started the upgrade procedure, as expected the BA went in the bootloader mode, but as before, from there nothing went on - it was not recognised by the PC or AS.
The strange story about it is, I connected very easily in the normal mode, I upgraded already in the past successfully ...
BUT NOW I'm really in trouble, because I can't exit anymore the bootloader mode. I tried a hard and soft reset, I have removed the battery for 10 minutes .... Now way, the sceen is always in bootloader. If I put the device in the cradle, it recognizes this, by showing USB, without cradle, its Serial. The bootloader shows the version 2.08
Shoud I replace the device and enquire with my provider for a new one?
Thanks and looking forward to hear from you, Alexander
About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!
Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!
looks pretty much the same like my trinity right now...
help would be very appreciated
Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry
Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::
Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)
Hi All,
from one moment to another my X1 decided to boot into bootloader mode.
The strange thing is however, that when I connect it to the USB of my PC and reset the X1, it boots normally. Well, almost normal as the USB doesn't seem to be working.
I flashed the rom to APP-SW_X1_GENERIC_UK_1213-6450_R3AA010__KOVS using the SDCard and that worked without a problem. But still the X1 boots into bootloader mode (except when connected to the PC).
I tried a hardreset, pressed the volume down button several times (to make sure it isn't stuck), tried to use MTTY (but that doesn't show a prompt), but nothing seems to help.
Is there anyone who can help me with this, because I'm out of ideas....
Update:
I managed to boot the OS (USB connected) and install HSPL using Xperia-SSPL-Manual. This succeeded and I now have SPL-0.78.OliNext. I flashed the phone to a new ROM (826x_KOVSKY_29017_2021), and that succeeded as well. It didn't solve my problem however. I still get the bootloader screen when I start the phone and can only start the OS by starting with USB connected...
Update2:
Yesterday evening I took the whole phone apart to make sure no buttons are/were stuck. Didn't find anything, put it back together and it still boots into bootloader.
I also managed to get a connection to the phone using NueTTY. I executed command Set 14 0, restarted the phone...and still it boots into bootloader.
If there is any one who knows of something that I haven't tried yet, PLEASE let me know....
same problem,,if there's a way to flash recovery from sd card in fastboot mode,,that'd be great
kldahmd said:
same problem,,if there's a way to flash recovery from sd card in fastboot mode,,that'd be great
Click to expand...
Click to collapse
Flashing the ROM is no problem, I can put every ROM on it that I like. But even after flashing the ROM the phone still starts in bootloader....
You can try to go into the bootloader on ur pc and use recovery.bat with fastboot.
xvink said:
Flashing the ROM is no problem, I can put every ROM on it that I like. But even after flashing the ROM the phone still starts in bootloader....
Click to expand...
Click to collapse
hi, I'm kind of having the same issue as you do..can you please be of help and tell me how did you manage to HSPL it to 0.78.OliNex?
Correct me If I am wrong, but you must copy Xpera_SSPL_Manual. exe on X1, run it from file explorer and then run X1_HardSPL.exe on your PC, whlie X1 is connected via usb (although mine also doesn't recognize the X1) ?
i would really apreciate it... thnx
i have the same problem guys, did anyone of you found any solution for this?
same problem
Have you tried to do a task29 with KovskyAdvancedRUU?
Hello,
i was trying to unlock my bootloader...i tried everything... my lg is euro-xxx
after a hundred attempts there was an error message every time i tried to boot from the bootloader ; [security error] boot image signature..
i tried to fix it flashing the original bootloader from the ''all in one tool''.. nothing happened.. and because i am a stupid noob i thought that a factory reset might re-wright this and restore it to its previous state... and guess what.. it didn't! and now my phone is dead. Even when i connect it via usb (it doesn't matter if it is the wall charger or the pc) the phone keeps looping to that error message....
please help me, i am desperate....:crying:
just after the first post there was a very fortunate turn of events!!!...at least that's what i think... when i connected my phone to the pc the loop in the bootloader stopped and there is a charging indicator instead.. is there anyone who can tell me if there is a way to fix my poor lg? i only have it for a week.......
if it is triing to update it can loop, try to remove the battery
What did you do to unlock your bootloader?
pandar3 said:
Hello,
i was trying to unlock my bootloader...i tried everything... my lg is euro-xxx
after a hundred attempts there was an error message every time i tried to boot from the bootloader ; [security error] boot image signature..
i tried to fix it flashing the original bootloader from the ''all in one tool''.. nothing happened.. and because i am a stupid noob i thought that a factory reset might re-wright this and restore it to its previous state... and guess what.. it didn't! and now my phone is dead. Even when i connect it via usb (it doesn't matter if it is the wall charger or the pc) the phone keeps looping to that error message....
please help me, i am desperate....:crying:
Click to expand...
Click to collapse
Did you root your phone first?
The same problem happened to me when i tried unlocking the bootloader however i just kept on restarting my device and it worked for me; try to turn on the phone by only using the charger. Also keep tapping the power button while the phone is turning on (try everything, i dont know if it will work for you but it just worked for me).
If you manged to turn on your phone use the LG PC Suite to do an Emergency recovery, this will reset your phone. Then i unlocked the boot loader first before rooting the phone use cmd instead of the all in one program.
there are yt videos on how to do this but i am a new user iam not able to post them
help
someone please help me, i was actualizano my lg 4x through lg mobile support tool gave me an error and now enceindo not in any way if sw or anything only when I connect it to my pc recognizes it as apx device. please help.racke
Hello everyone. I am in real trouble here and I will explain why. I have recently tried to get the custom recovery with a locked bootloader (philz touch) on my device by following a thread. As far as I know I followed the guide properly but when my device rebooted it bootlooped 10x and then when my device booted it froze at the lock screen and restarted. now my device bootloops several times before boot and once it boots I get 1min at the most before it freezes and restarts. Also sometimes it fails to boot at all and it gets stuck in an infinate bootloop and I have to pull the battery. when I connect it to my laptop with a usb cable it is only recognised if the device boots but I only have a few seconds because the phone reboots and disconnects when I try and enter recovery or download mode my screen goes black and the only way to get of this is to pull the battery. I have also tried to connect to my laptop when on this black screen but i have had no success. If I turn the phone off and connect it to my laptop via usb when I am on the "battery charging screen" it appears on my computer as a unknown usb device. i do have all the drivers ect. my device is rooted with baidu root if that helps. ive heard of a little device called a usb jig would that be useful to me? sorry if this is not worded very well or looks like a book. Im not a idiot but not quite "tech savy" i would like to think i am somewhere in the middle. I have been using this site for years for various devices and always managed to succeed. help would be apprecited. Thanks
UPDATE: I have tried to factory reset from the settings but for some reason the button is greyed out and it wont let me press it! also I cannot connect to wifi or mobile data these are greyed out aswell and when I try to connect via the sliders in the settings menu they are also greyed out!!!
ethan8494 said:
Hello everyone. I am in real trouble here and I will explain why. I have recently tried to get the custom recovery with a locked bootloader (philz touch) on my device by following a thread. As far as I know I followed the guide properly but when my device rebooted it bootlooped 10x and then when my device booted it froze at the lock screen and restarted. now my device bootloops several times before boot and once it boots I get 1min at the most before it freezes and restarts. Also sometimes it fails to boot at all and it gets stuck in an infinate bootloop and I have to pull the battery. when I connect it to my laptop with a usb cable it is only recognised if the device boots but I only have a few seconds because the phone reboots and disconnects when I try and enter recovery or download mode my screen goes black and the only way to get of this is to pull the battery. I have also tried to connect to my laptop when on this black screen but i have had no success. If I turn the phone off and connect it to my laptop via usb when I am on the "battery charging screen" it appears on my computer as a unknown usb device. i do have all the drivers ect. my device is rooted with baidu root if that helps. ive heard of a little device called a usb jig would that be useful to me? sorry if this is not worded very well or looks like a book. Im not a idiot but not quite "tech savy" i would like to think i am somewhere in the middle. I have been using this site for years for various devices and always managed to succeed. help would be apprecited. Thanks
UPDATE: I have tried to factory reset from the settings but for some reason the button is greyed out and it wont let me press it! also I cannot connect to wifi or mobile data these are greyed out aswell and when I try to connect via the sliders in the settings menu they are also greyed out!!!
Click to expand...
Click to collapse
Hi, you need an unlocked bootloader for it to work properly. You can find how to unlock the bootloader by going to Sony's website and see where it says to unlock the bootloader or just look for it on Google. To get back to the stock rom (Android 4.4.2 KitKat), you will need Flashtool and the stock rom. You can find the rom on Google by just typing "sony xperia e1 d2005 stock rom". To get the recovery just try looking for it on XDA. And USB Jig will not work for Sony devices. USB Jig is only designed to work with Samsung devices.