Related
i plug the tilt into the charger and it does not charge. the left led starts to blink amber and the phone recognizes that it's plugged. but still doesn't charge.
i tried some tricks and i found out that when i take out and put back in the battery(while connected) it starts to charge (the led is amber, not flashing and the battery level goes up).
after I use it for a bit and try to charge again the problem comes back.
(i haven't found any post describing that kind of symptoms)
Sounds like you battery is the problem, try to replace it and see it it changes something!
First, unfortunately I don't have an answer to your problem.
But to make it easier on someone else to eventually help you, could you please answer the following questions:
1. Is it the original charger and battery you are using?
1a. If the answer is no, what charger/battery model are you using?
2. Does the phone charge if connected via USB to a computer?
3. How long have you had your Tilt for and how long does the battery last when it's on full charge?
4. Do you know anyone else that has a Tilt/kaiser who would let you see if you can charge their battery in your phone? (to see if the problem might be with the phone and not the battery although I highly doubt it)
The battery cells might be "dead" - after charging your phone repeatedly over a long span of time it can happen.
Jonasteddybear said:
1. Is it the original charger and battery you are using?
1a. If the answer is no, what charger/battery model are you using?
2. Does the phone charge if connected via USB to a computer?
3. How long have you had your Tilt for and how long does the battery last when it's on full charge?
4. Do you know anyone else that has a Tilt/kaiser who would let you see if you can charge their battery in your phone? (to see if the problem might be with the phone and not the battery although I highly doubt it)
The battery cells might be "dead" - after charging your phone repeatedly over a long span of time it can happen.
Click to expand...
Click to collapse
1. Both are original
2. Does the same thing as with the charger.
3. The device has around 2 months, the battery life is same as it was brand new
4. i might be able to check it with different battery during the weekend
Although, i think the battery is fine. It looks like the phone does not initiate the charge, but when you will do the trick (take the battery out and put it back) it will be charged normally.
I had a similar problem yesterday, whilst charging the phone during a car journey.
My suspicion is that the problem in my case was due to overheating. It was a hot day and the phone was getting cooked in the sunlight on top of the dashboard (the phone did feel very hot). Removing and re-inserting the battery worked for about 5 minutes then problem re-appeared. I put the phone away and tried it later on, when it had clouded over and the temperature had dropped - the phone charged OK. Have not had any problems since.
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
kenny89 said:
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
Click to expand...
Click to collapse
Definatly sounds like a faulty cell in your battery
At least its not the phone thats broken, a battery is easily replaced.
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Its unlikely its the hardspl. I would guess hardware issue, but if it charges while off then thats unlikely too.
I assume you've tried a hard reset already to rule out any application interferring with it?
Also what happens when you plug into your PC? same thing?
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
3) Hardware issue with the phone - that would just suck!
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
kenny89 said:
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
Click to expand...
Click to collapse
A fully charged cell has about 4.3v across it. As its drained of current the voltage drops to about 3.3v, when its fully depleted.
The phone uses this voltage level to display the current capacity of the battery
If a cell fails in the battery, as its capacity reduces its not able to provide enough current. Power = current x voltage
If the phone tries to draw normal current, the voltage drops excessivly to conserve the above formula. This shows in the phone as a decrease in battery capacity. The voltage across the battery drops to below 3.3v before the remaining cells are depleted, and although there is still enough current to suply the phone, there isnt enough voltage. Overall there isnt enough power (P=IV)
A rested battery may show enough voltage for a short while (when you first put it in) but the voltage will drop drasticly as soon as any significant current is drawn.
This is a really common failure in a bettery, and you can spot it very quickly when you see sharp drops in the battery meter.
someone1234 said:
I
Also what happens when you plug into your PC? same thing?
Click to expand...
Click to collapse
Yes, same thing...
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
Click to expand...
Click to collapse
Don of course and even reflashed without installing any application, just synced with PC... same issue. In the mean time I even reflashed the stock SPL to try... and the Diamond is now charging in Off modus, so I'll turn it on tomorrow to give it a trial
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
Click to expand...
Click to collapse
I guess the Battery has an issue, but none is available quickly in my country, I'll have to try to order one abroad... let's check...
Thanks anyway for your advices...
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
Check the current on the 3rd party charger.
kenny89 said:
(adapt htc, specifications are the same of the original adapter)
Click to expand...
Click to collapse
output 5V/1A , same specs. input is a little different (110-220hz, 0,2A) against (110-220hz, 0,15A).. but that isn't a problem right? The output is the same.
Thats really strange. Yeah its the output that matters,
There should be no difference at all!
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
XzaniX said:
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Click to expand...
Click to collapse
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
kenny89 said:
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
Click to expand...
Click to collapse
That noise is caused by a harmonic of the GSM signal. It sounds like the grounding is not correct, either for the speaker or possibly a whole section of the circuit.
Not good!
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
bakman said:
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
Click to expand...
Click to collapse
-hi Bakman, of course this was my first check Anyway, is getting worse, now it even won't charge when switched off So I'll send it for repair I guess... I hate to wait for a new device, pay a huge amount of money for it and when you finally get it, it's defective
robinbb said:
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
Click to expand...
Click to collapse
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Ildefonse said:
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Click to expand...
Click to collapse
Sounds definately like a s/w problem to me, they will have to provide a fix in a ROM update I guess. Mine is OK at the minute though. Is yours UK or grey import?
Err, I bought the WWE version in Holland. Actually someone bought it for me, but that's not the point.
I did find out that using the advanced config tool to disable the setting "GPRS auto attach" really saves a lot of battery power! Yesterday my phone was idling the whole day and night, and battery only dropped 10-20%.
Guys, i think my xperia is broken
last night my battery was empty so no big deal i thought.
today i've connected it to the charger to charge and pressed the ON button.
when i pressed it, a red light under the ON button started burning.
i thought? wtf? mayby because it's emty or something.
but after more then 1 hour of charging it still doesn't do anything.. and now even the redlight doesn't show up!
does anyone know what to do?
renedis said:
Guys, i think my xperia is broken
last night my battery was empty so no big deal i thought.
today i've connected it to the charger to charge and pressed the ON button.
when i pressed it, a red light under the ON button started burning.
i thought? wtf? mayby because it's emty or something.
but after more then 1 hour of charging it still doesn't do anything.. and now even the redlight doesn't show up!
does anyone know what to do?
Click to expand...
Click to collapse
Hello dear friend, I sympathise with you I had this exact same problem and was worried sick for a day and a half that it was dead! the red light under the power button is the battery fail light (as far as i can tell) it goes on for example when you plug the charger in and remove the battery. I've found if you run the battery down to absolute minimum it almost seems like the X1 cant detect the battery any more and displays the red light. I fixed mine by removing and replacing the battery a few times and plugging it into the wall charger for a few hours. keep trying and dont lose heart, like I say it took me a day and a half (with a sleepless night inbetween
Also mine, but after five minutes it's wake up.
Try simply to remove battery, or performe a soft reset via hardware button with the stylus.
Let you X1 charge for an hour or 2 and it will start up again, guess this is when the phone don't get a enough power to start up.
(Guess it can indicate some other error as well but probably just lack of juice in the battery .. )
thanks guys..
it is still not working but i know that the phone it self is OK.
i wend back to the store and they switched the battery from another xperia.
it worked fine
i'm so happy right now. it's charging at the moment, but still not going on, well, i have to wait and see then.
again: thanks for the posts guys
Mind you... it might take a while! I had it connected to a cheap usb charger for a night (which wasn't good enough obviously) and it took me the better part of a morning to get it to life again with the SE charger. I find it most irritating that this sort of thing isn' t mentioned in the manual. At least not where I could find it. Things like a phone that doesn't want to start make you sweat horribly.
I have this problem with mine but still no luck
Been dead for weeks now.... Finding it hard to get a copy of the receipt too bah
Only had it a month too..
It's prolly one cell in the battery that are "broken".
Had that on my X1. There are 3 cells in the battery and if one of them doesn't work as it should, the battery only delivers 3-3.1 volt.
Your phone "wakes up" at 3.335 volt but dies at 3.1. I've been measure it myself.
My phone are now back in business with a new battery, a new batterycover and latest software. No problem if you have guarantee...
PS... Try to avoid one thing. Avoid heat in battery. Lithium hates heat.
McGilljam said:
It's prolly one cell in the battery that are "broken".
Had that on my X1. There are 3 cells in the battery and if one of them doesn't work as it should, the battery only delivers 3-3.1 volt.
Your phone "wakes up" at 3.335 volt but dies at 3.1. I've been measure it myself.
My phone are now back in business with a new battery, a new batterycover and latest software. No problem if you have guarantee...
PS... Try to avoid one thing. Avoid heat in battery. Lithium hates heat.
Click to expand...
Click to collapse
You are right, man.
Usually, if you discharge a battery till the very last drop, it can happen that:
A) one of the cell goes beyond its safety level, and it "breaks". That's unrecoverable, AFAIK.
B) the cells gets unbalanced, and you nedd several charge/discharge cycles to get them balanced and fully recovered.
Add to this that Usb charging is usually unable to wake up an almost totally drained battery. This won't happen with a normal charger, but Usb charging voltage is lower than normal (of course, it's usb not home plug!) so it has not enough power to wake up the dead battery. If you leave your device in charge for some minutes, it will eventually manage to wake the battery.
However, I noticed that the X1 has a bad power management. Usually my X1 low level battery threshold varies between 10% and 5%. One week ago, at 10% it just shut down and won't recharge, showing me the red light over power button. Removed battery 3/4 times and charged with home charger, it gets recovered. Try to plug the charger, remove the battery and insert it again, doing all this with the charger always plugged.
In my opinion, that's really annoying, I never know when it *really* has a low battery!
@ [email protected]
B) the cells gets unbalanced, and you nedd several charge/discharge cycles to get them balanced and fully recovered.
yeah.. i had that with my P990i (symbian uiq3) phone the batter went in 1 day to 50% now it still has 80%
this same thing happend to me last night, i just pluged it to a wall charger & waited for an hour good thing when i pressed the power button it came back to life. was worried then and now its all good.
i had this on my xperia a while ago i think its just the battery is extremely dead.
after an hour of being plugged it in it turned on again
Red Power button Led
Glad to find this info, the red light gave me the chills at first too. My phone blacked out while using TomTom 7.4 on a stock unbranded NL Rom, after it had given me low batt. warnings. Now it's in the 'home plug' charger, sipping juice on the red light... I hope it comes out of it soon. Anyway, I was wondering if anybody has ideas on checking battery cell failure? Or battery diagnostics of some sort? It would be a shame to use a crippled battery just because you don't know it's operating below its max capacity. By the way, I'm not part of the lucky bunch in possession of a multi meter...
EDIT:
As soon as I hit 'post' the notification Led's display charging! And the red light's off of course. Guess the first post brings some beginners luck, hehe. Anyway, thoughts regarding battery diagnostics etc are still welcome!
Encountered this and according to the helpdesk, it's cos the backup battery is empty so he advised me to charge the phone for half an hour without the battery, and then charge it with the battery after that. Didn't work. Called up the helpdesk again and he said for some, they've to charge (without the battery) for an hour. Ok, tried that. But still doesn't seem to be working. Gonna just leave it charging (with the battery) for a few more hours. If still can't guess I gotta bring it down to the service centre.
there is a backup battery in xperia???
leobox1 said:
there is a backup battery in xperia???
Click to expand...
Click to collapse
Remove your battery, wait 3 minutes, insert again the battery. If you have lost date & time info, no, there is no backup battery, otherwise yes, there is.
Well, anyway, sent my X1 for servicing. Over at the service centre, they tried to 'boost my battery' but couldn't get it working. So had to leave it there for them to work on it.
Just had this same problem, cleaned the battery terminals and hey presto...it's all good again..
Regards,
Astoroth
Sent my X1 to the service centre with regards to this issue and they replaced the motherboard. They'd tried boosting the battery but no use.
Same problem.. this is what happened
ok, I came back from work an as usually i plug the charger in my xperia, the baterry left was like 30%, ok, then, I connect in the 3.5mm an autput for a big Radio so i can listen full music... so.. in a while, in my house there was a power down.. really fast one... like... 0.01secs... (like down and up really fast).. in that change my cellphone went down =S.. and sice today never get up ='(... there's just that red light in the power button each time I plug the charger on... any help?.. is the same problem of the topic? :S.. plzzz.. i dont have even a month with this pretty cellphone =( poor baby
Hi,
Just purchase 2 HTC HD2 replacement batteries from ebay (Non original)
and facing a problem in charging both of them.
When I power up the phone it shows 80%, but when charger is connected,
it does not show the charging icon and the notification LED keeps blinking between amber and green.
Any one got any idea? Both the batteries defective?
I use a meter to measure the batteries, one got 4v the other 4.02v.
Seems ok but just cannot charge inside the phone.
Help and advise needed. Thank you.
Got the same issue here. They will charge up to 68% then stop.
Have to turn off phone and plug in again to charge the final bit - OR - take them out and put in caddy charger.
Battery replacement charging problem
I also have the same problem but this issue happen only if you use the device while charging the battery. If the issue occur try turn off the screen (not power off) and wait around 3-5 mintues then it continue charging the battery without any problem. The problem is occur only if we use the power too much such as Telephone call, Wifi, GPS then it back to blink green and amber again and again. Howerver I found out that sometime after soft reset the battery report it have been charge during green and amber blinking (in my case I upload youtube of 120MB and take quite a long time around 2-3 hours the battery indicate 6% and not increased until I softreset them then become 72%)
Howerver, this is almost not acceptable since it should be charged normally in any condition.
touchu said:
I also have the same problem but this issue happen only if you use the device while charging the battery. If the issue occur try turn off the screen (not power off) and wait around 3-5 mintues then it continue charging the battery without any problem. The problem is occur only if we use the power too much such as Telephone call, Wifi, GPS then it back to blink green and amber again and again. Howerver I found out that sometime after soft reset the battery report it have been charge during green and amber blinking (in my case I upload youtube of 120MB and take quite a long time around 2-3 hours the battery indicate 6% and not increased until I softreset them then become 72%)
Howerver, this is almost not acceptable since it should be charged normally in any condition.
Click to expand...
Click to collapse
Do you guys think this is due to "low quality" batteries that could not be charge properly in the phone. Can only be charged using cradle....??????
same issue here, except mine will go amber/green regardless of power % left.
I have seen mine doing amber/geen even when it'[email protected] 10% with screen off.
That would all seem to point at the phone drawing more power than can be put in the battery at the same time.
I reported it to the ebay seller in anycase, who says he will contact the factory.
cheap ebay batteries causing problems?
My cheap battery does the same if I use cheap craddle that came with it. However if I use original charger and stock cable it is all fine.
Oh yes and original battery used in cradle does the same orange/green.
However in any case living it for 3-4 minutes starts charging process.
When it's charged up fully it's def a massive improvement on the original though. I can get almost 50 hours out of it now, the original one I had only got 24 at a push
blanco360 said:
When it's charged up fully it's def a massive improvement on the original though. I can get almost 50 hours out of it now, the original one I had only got 24 at a push
Click to expand...
Click to collapse
what actual battery do you have Blanco, any chanve of a link to where you bought it, i have ordered a momax but are still waiting, this standard battery is killing me
this one
http://cgi.ebay.co.uk/New-2x-Batter...ries_MobilePhoneBatteries?hash=item2a035b4473
blanco360 said:
this one
http://cgi.ebay.co.uk/New-2x-Batter...ries_MobilePhoneBatteries?hash=item2a035b4473
Click to expand...
Click to collapse
thanks for that, and you definatly think it lasts longer than the original htc ? are you a heavy user?
Yes - BUT - mine came with a 750mA, and I think you guys will have a 1230 right?
So like the title said i have replaced the battery in my P9, with an original battery. It has the same part number and all that. I have noticed that the phone won't charge the replacement battery, i have returned the new battery in warranty and revived another one. Same thing, the phone starts up as soon as you plug in any kind of power source to it , like a charger, but no charging notification. The notification light pulses in rare intervals (some thing of 10 secs or more) but it's not steadily on like when normally charging. And the most vexing thing is : if i replace the original battery it charges. Unfortunately the the original battery now has the bad habit of cutting out on me at random from anywhere 47% or bellow .... The phone is nearly 3 year old now.
Have you given the new batteries some time to charge? Maybe they were delivered to you fully discharged.
First one was on 85% the second on 60% or so. I kept the 1st one on charger for a whole weekend... Still nothing
Have you tried to callibrate the original battery (you say it suddenly drops if below 40%)?
Yes, I have allowed the battery to run down to 3% and the phone turning itself off. Then fully charged it while being off. So the original battery is just plain old, nearly 3y old. The problem is that the phone refuses to charge the new batteries regardless of original charge. Also it turns automatically on when you plug in a charger, not just showing the charge animation. That is not normal behavior.
olaf2k4 said:
Recalibrate how?
Click to expand...
Click to collapse
Did you try to search?!
There is a thread on battery calibration (XDA, Huawei P9, Q and A
https://forum.xda-developers.com/showpost.php?p=75592069&postcount=18
zgfg said:
Did you try to search?!
There is a thread on battery calibration (XDA, Huawei P9, Q and A
https://forum.xda-developers.com/showpost.php?p=75592069&postcount=18
Click to expand...
Click to collapse
I've done that after reading you'r message , but i have already done the steps not req root. And i'm not willing to root my phone.
P9 also not charging
Did you manage to find a resolution to this issues? I'm having the same problem with my P9. I changed my battery, and it now won't charge. It turns on ok, and everything seems to be working. When I plug in the charging cable, it makes the sound it usually does, the battery symbol flashes green but instantly turns white again. When the phone is off, plugging the cable in switches it on, but no charge. I've had two replacement batteries, both have the same issue. Also, the original battery is now doing the same. I'm wondering if I damaged something while removing the battery.
domj81 said:
Did you manage to find a resolution to this issues? I'm having the same problem with my P9. I changed my battery, and it now won't charge. It turns on ok, and everything seems to be working. When I plug in the charging cable, it makes the sound it usually does, the battery symbol flashes green but instantly turns white again. When the phone is off, plugging the cable in switches it on, but no charge. I've had two replacement batteries, both have the same issue. Also, the original battery is now doing the same. I'm wondering if I damaged something while removing the battery.
Click to expand...
Click to collapse
I think it's problem in charging IC or port.
Hi all
Had same issue with replacement battery
After replacement battery isn't charging. Problem is in bad connections
(probably from long shelf storage connectors got rusty)
Voltage was fine but temperature reading was way off (very low -2) and phone didn't charge battery
Problem is that there was no error message about battery temp.
After cleaning the contactors battery reading became normal and it started charging
Anybody ever had any solution to this problem? I have the same issue. Battery replaced - not taking any charge. If micro USB charger plugged in - the phone turns on. If it is already turned on plugging in the charger the screen flashes the % of the charge and nothing.