i own a att tilt 8925, i updated it and i want to remove the att custom apps. can someone help.
shahabosama said:
i own a att tilt 8925, i updated it and i want to remove the att custom apps. can someone help.
Click to expand...
Click to collapse
Have a look at this modified version of the ATT WM6.1 ROM: http://forum.xda-developers.com/showthread.php?t=424725
Ta
Dave
The easy way is to do a hard reset of your device. When you go through the alignment and get to the 'Touch your screen to start using your device' screen, touch the screen and then immediately do a soft-reset. This will stop you from installing the bloat. Keep in mind that you have to do it before the 'device customization in 3 seconds' window comes up.
DarkVillain said:
The easy way is to do a hard reset of your device. When you go through the alignment and get to the 'Touch your screen to start using your device' screen, touch the screen and then immediately do a soft-reset. This will stop you from installing the bloat. Keep in mind that you have to do it before the 'device customization in 3 seconds' window comes up.
Click to expand...
Click to collapse
This does not work for me after updating to WM 6.1 (official ROM for Tilt from HTC). I hard reset, push the reset button before customization begins, and it results in another hard reset with the customization trying to happen again, and again...
you need to soft reset your phone as soon as you see the today screen. If you wait any longer, it'll go through the reset process once again, with bloatware still installed.
telegraph0000 said:
you need to soft reset your phone as soon as you see the today screen. If you wait any longer, it'll go through the reset process once again, with bloatware still installed.
Click to expand...
Click to collapse
Ahhh, interesting, thanks. I was waiting until the moment I saw the dialogue window "customization will begin in 3 seconds". Even though I pressing reset immediately upon seeing the dialogue, it would not work. Instead it would perform another hard reset after which it would try to install the customization again.
This time I pressed it BEFORE even seeing the customization dialogue and it worked! Thanks.
Hi,
Can someone tell me where the bloatware is stored on the ROM?
Thanks
msuk said:
Hi,
Can someone tell me where the bloatware is stored on the ROM?
Thanks
Click to expand...
Click to collapse
In the Cooked ROM or in the Kitchen?
Most Bloatware goes in \Windows or \Program Files in the Cooked ROM. I'm not sure about the Kitchen.
Ta
Dave
DaveShaw said:
In the Cooked ROM or in the Kitchen?
Most Bloatware goes in \Windows or \Program Files in the Cooked ROM. I'm not sure about the Kitchen.
Ta
Dave
Click to expand...
Click to collapse
Hi,
Is there a log file that is used to install the bloatware? i would like to edit what bloatware is exactly installed.
Thanks
Dig in and find it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really want to avoid a HR.
is there any other way to do this?
Well, I've always been afraid to try this. I finally built up enough courage to really start messing with my Tilt.
First attempt was a BIG SUCCESS!!!
Seemed to work by soft resetting the instant the today screen appeared. Nice to have all that free space on my device. Thanks for the info.
Now to choose a HardSPL, Radio & ROM!!! /me fears a long ROM swapping addiction is forthcoming.
Related
GUYS! WTF is happening..!? Ive never seen this before, I got a snow screen this morning..!! Somebody knows how this is possible? I never had it before..!
What do you mean snow screen? White static/noise?
P1Tater said:
What do you mean snow screen? White static/noise?
Click to expand...
Click to collapse
Like a old tv..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Something like this but not moving
have u tried a hard reset or even a soft reset?
P1Tater said:
have u tried a hard reset or even a soft reset?
Click to expand...
Click to collapse
Yeah I did..But I think it has to do with the unlock programm that released yesterday..because Id never had this before. And the last thing I did was flashing the unlock tool!
If you are referring to SuperCID unlocker by jocky, then I doubt it. I tested it out on mine and I am having no problems.
I've had the exact same problem. I reflashed with a new ROM and it was fine again. I believe some of the radio roms are a lot less stable than others. I've had no issued until I started messing with radio roms.
radio
hello bram i also used the sim unlocker
no prob only in step3 reflash the radio i had 1.27.12.29 orange
because it was not there for download i used 1.27.12.17 but whit this radio and the orange rom i hade a great batery lost [drain]
now i used radio 1.27.12.32 and al works grait again sorry for my englisch
which sim unlocker program do u speak of?
Jakeypoo
http://forum.xda-developers.com/showthread.php?t=361039
Bram87 said:
GUYS! WTF is happening..!? Ive never seen this before, I got a snow screen this morning..!! Somebody knows how this is possible? I never had it before..!
Click to expand...
Click to collapse
just got that installing dutty's new rom.
i just needed to flash radio .11.
i had radio .9
What Rom are you using and what Radio are you attempting to use with it. The only time that I've seen this is when I flashed a rom that used an older radio when I had one of the newer 6.1 radio's installed. I flashed to the older radio and it solved the problem.
Using CID unlocker by olipro snowy multicolored screen help!!
My phone was already sim unlocked but i wanted to cid unlock it, so I was following instructions for olipro's unlocker. After step 2 had loaded and then restarted my phone the program on the pc said finish at the bottom, so I clicked it. Immediately the phone went to this snowy multicolored dotted screen and vibrated constantly. Not knowing what to do I waited 5 min but it was still going. So I unplugged from the usb and pulled out the battery. I am totally new at this but think I followed all the steps correctly in the "Flashing your first rom (for noobs)" section. I restarted my phone and the radio says it has olipro's radio but once past the att start up screen it goes right backc to the snowy screen although no buzzing anymore.
I had a phone do the exact same thing, also during the unlocking process... After I jsut reflashed a diffrent rom, it all worked... Hope this helps
Bram87 said:
GUYS! WTF is happening..!? Ive never seen this before, I got a snow screen this morning..!! Somebody knows how this is possible? I never had it before..!
Click to expand...
Click to collapse
Hi folks, I'm having some problems installing this .cab file.
It's required for the use of Staryon's ace "TrackMe" program, so I haven't been able to use TrackMe for a while.
The problem began when I was reinstalling all my programs and cabs after a hard reset.
This is what I get when I install the cab file:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What's going on there then? I've tried to remove it, reinstall it, re-download it, whatever. No change.
However, if I click ok it then apparently installs correctly, or so it tells me.
If I then try to run TrackMe, this is what I get:
Followed by this:
Can anybody help?
Hi,
you may need Dot NetCF 3.5.
The best install guide I found was here.
Try this then your app again.
Ta
Dave
people posted on how to remove when having issues and no help was given when errors come
Sparrowhawk said:
Hi folks, I'm having some problems installing this .cab file.
It's required for the use of Staryon's ace "TrackMe" program, so I haven't been able to use TrackMe for a while.
The problem began when I was reinstalling all my programs and cabs after a hard reset.
This is what I get when I install the cab file:
That is a hugh file if I remember, like 25 megs maybe it is installing some components then running out of space to complete the install, Mine is installed on my storage card and it works fine
Click to expand...
Click to collapse
What is it for by the way?
gqstatus0685 said:
What is it for by the way?
Click to expand...
Click to collapse
It is an application framework. Since storage space on mobile devices is so limited, you can't write these behemouth programs that take up gigs of space like you can on a PC.
Net cf allows you to download the framework of many applications just once and use that framework to run many applications thereby saving many megs of storage space that these apps would otherwise take up.
i´m having the same problem sparrowhawk did anone already knows how to solve this?
I'm just giving this thread a bit of a BUMP in the hope that someone can tell me how to get past this problem.
To recap:
I had CF 3.5 installed before and TrackMe worked like a charm.
Since I did a hard reset, it simply won't let me put 3.5 back on.
All help greatly appreciated, folks.
Sparrowhawk said:
I'm just giving this thread a bit of a BUMP in the hope that someone can tell me how to get past this problem.
To recap:
I had CF 3.5 installed before and TrackMe worked like a charm.
Since I did a hard reset, it simply won't let me put 3.5 back on.
All help greatly appreciated, folks.
Click to expand...
Click to collapse
Again, he first error sounds like you just don't have enough room on your device. As I said it is a hugh file.
Read this :
http://forum.xda-developers.com/showthread.php?t=398091
And do another hard reset and try installing .Net CF first.
denco7 said:
And do another hard reset and try installing .Net CF first.
Click to expand...
Click to collapse
I was thinking about that after I read the thread linked above, I might go down that road then.
Thanks for helping.
Hi,
Now I have used diamond and I want to reset call duration. How I can made this? I try to change the time while I have incoming and outgoing call, but without success.
I also try to use mtty software but I think my SPL doesn't support rtask command.
Can somebody tell how to do this ?. If this information is confidential please give me information on priv
Many Thanks
i havent tried, but go to call history/ menu / call timers and tap reset.
ekksman said:
i havent tried, but go to call history/ menu / call timers and tap reset.
Click to expand...
Click to collapse
I think we have a little misunderstanding
I want to reset call duration under:
Start > Settings > tab System > Device Information
This looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This all was made by the previous owner of my diamond, and I want to get rid of it.
This was not meant to be changed. It shows how much time it has been used.
mpf54 said:
This was not meant to be changed. It shows how much time it has been used.
Click to expand...
Click to collapse
I was able to change it on my old Tytn, so technically this can be done,
Flashing or Re-flash a radio rom is the only solution i know for now
I am sure that will not reset the timers ... Flashed several new radios and roms even last week and I am sure i did not make 50 hours of calling time in that period
xvicx said:
Flashing or Re-flash a radio rom is the only solution i know for now
Click to expand...
Click to collapse
This is for sure not the correct solution . I have flash my diamond with new Dutty with radio rom and call duration stay
xvicx said:
Flashing or Re-flash a radio rom is the only solution i know for now
Click to expand...
Click to collapse
How I understood, it's not working with WM6 and WM6.1.
After re-flashing HTC Trinity and HTC Diamond, Call timers remains unchanged.
However, when I put to my old Qtek S200 original WM5 WWE ROM, all counters went to ZERO.
run from the cell it will reset ur call timer
http://www.4shared.com/account/file/76548966/e8fe98f6/CCT.html
anyone tried the reset file ??
dalco said:
run from the cell it will reset ur call timer
http://www.4shared.com/account/file/76548966/e8fe98f6/CCT.html
Click to expand...
Click to collapse
Anybody tried this file before?
Jalfrezi said:
anyone tried the reset file ??
Click to expand...
Click to collapse
I try to reset using this file but without any success
For me this software is not working
CCT
It's erasing call duration in phone dialer, but in system information call duration remains alive
cheyenne said:
It's erasing call duration in phone dialer, but in system information call duration remains alive
Click to expand...
Click to collapse
This can be done without any extra software
shame it doesnt work, not that its a major problemo
cheers for trying lets hope somebody pops up with an option
I am also interested to reset the time counters on (for me new) used Diamond!!
I am sure out there in the forum are someone that can fix this !!?
Am i right ???
Reset Application
This application dose not reset anything its sh...why do people post scrap like this
downloading to try, tanks
try this:
http://www.modaco.com/content/trini...253671/how-to-reset-call-counter/#entry814301
Am screwed up...I have just installed this graphics driver on my HTC TOUCH HD. I dont know what i was thinking and now my phone is stuck on the boot screen.
Please help.
did you try a hard reset
otherwise try to reflash your rom
i have just reflashed and now phone restarts with good screen but then revert back to like vga mode.
What do you mean? does it boot up WM and let u use the phone? and what doe you mean with VGA mode?
Imperium said:
What do you mean? does it boot up WM and let u use the phone? and what doe you mean with VGA mode?
Click to expand...
Click to collapse
this i what i meant
Now the phone freezes repeatedly...and it reset itself but after reseting itself, if i switch it to sleep and then on again the screen returns to normal resolution. but its still freezes and I have to take the battery out eventually.
I have got davideuck v6.1 on it now and its so slow when it works before freezing again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Already tried to flash another ROM?
Imperium said:
Already tried to flash another ROM?
Click to expand...
Click to collapse
I initially had david rom v4 when this happened, so i flashed version 6. the screenshot i posted are of version 6 but as am typing this am flashing back to v4.
Okay, if you have flashed V4 back, do a hardreset after flashing. if that does not work either i'm afraid i'm out of options. You could try to install the drivers again to see what happens. Otherwise you should wait for someone who knows something else to try?
good luck
Imperium said:
Okay, if you have flashed V4 back, do a hardreset after flashing. if that does not work either i'm afraid i'm out of options. You could try to install the drivers again to see what happens. Otherwise you should wait for someone who knows something else to try?
good luck
Click to expand...
Click to collapse
its restarting now and all seem to be okay for now... if there is anything again, i ll get back to you guys.
really appreciate all the help.
One more thing if anyone can help, there was a cab file that allow you to use a background for all tabs, dont know if anyone can point me in that direction.
everything looks fine
i tryed to flash my htc touch hd, and the same problem occured, when i try to perform an hard reset it says: no image file. an d i can'0t get active sync to synchronize with my pc to reflash it... any help?
is there any way to sync my htc without active sync or reinstall it? thank you
saayinla said:
everything looks fine
Click to expand...
Click to collapse
hey saayinla how did you solve the htc scambled colours when restarting?
thank you
mprim said:
hey saayinla how did you solve the htc scambled colours when restarting?
thank you
Click to expand...
Click to collapse
sORRY for the late reply...I put the phone in boot loader mode by pressing the down button and pressing the power button. then you can plug the usb cable then you can run the customrru.exe upgrade file.
ok guys, first off, I'm glad you (saayinla) got your issue sorted. But try and keep this thread on topic, i.e. phone stuck in boot screen etc. If this thread starts turning into a Q&A with all sorts of issues and people asking new questions after original question answered I'll close thread.
Ta
Rick
Just out of curiosity did you HSPLed you devide with the last version of HSPL? I've seen this screen once and it was because of old HSPL with 1.56/1.57 ROM used!
No i did not, i still have the HArdspl thats been on since january..Olinex something cant rememeber what versio...
SenseHERO 1.4
FIRST if you need help booting from nand(internal storage, getting rid of that horrible winmo follow this tutorial here written by staud8469)
this is based off of The trio manup456 ccyrowski and MikeTaylors SenseHERO 1.4
DISCLAIMER:
as always im not responsible for anything you do to your phone while using these files
I personally didn't zipaligned all the apps for this build but i will........
it IS damn!!! fast!!!!!!... calls come in faster. i still recommend turning off vibrate on ring when not necessary to have on.
no rosie lag
all works
except bluetooth! post any bugs you may have
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FOR SDCARD
system.sqsh
basefiles-20091116
NAND BOOT IS RECOMMENDED BY 4 OUT OF 5 DENTISTS AND THE AMERICAN HEART ASSOC.
FOR NAND
NAND Kit
great work
I just had a question on were to put the hero.user.conf file. Do you just put it in the conf folder on root, or somewhere else.
kdub94 said:
I just had a question on were to put the hero.user.conf file. Do you just put it in the conf folder on root, or somewhere else.
Click to expand...
Click to collapse
yea put it in your conf folder, make sure you backup what you have. although im sure you wont be switching back
It runs veeery slow during the first boot setup and it looks like the phone isn't sleeping Other than that, I really like it!
hellovx7600 said:
It runs veeery slow during the first boot setup and it looks like the phone isn't sleeping Other than that, I really like it!
Click to expand...
Click to collapse
are you using the files i posted, and is this running from your nand or from haret?
I'm using the files that you posted from nand. The phone locked up and I just reset it and now it sleeps! Score! I did notice that there are duplicate music and spare part icons and that the camera force closes. I still can't believe how fast this is!
hellovx7600 said:
I'm using the files that you posted from nand. The phone locked up and I just reset it and now it sleeps! Score! I did notice that there are duplicate music and spare part icons and that the camera force closes. I still can't believe how fast this is!
Click to expand...
Click to collapse
camera works just not the default camera app(which has never worked in hero builds btw) though get fxcamera from the market
downloading now will give some feedback later on, thanks
i know this is a stupid question, but how can we exchange files like music with a windows computer. I am running vista. Can someone please help
could you post some screens please?
how do you remove widgets, tried clickin and holding but doesnt bring up trash
mikeyy00 said:
how do you remove widgets, tried clickin and holding but doesnt bring up trash
Click to expand...
Click to collapse
yea its a little bit harder with hero but it is possible you just have to work with it ya know
Hey I flashed it to nand with 320x480 nbh,
I just get android_power: wakeup when i boot it, any ideas what I may have done wrong?
very nice build, very quick, good work , im wondering if u know which part of the hero/donut/cupcake system controls the notification settings and can we back port that part from eclair so we dont have the notification message not sent bug?
margosmark said:
Hey I flashed it to nand with 320x480 nbh,
I just get android_power: wakeup when i boot it, any ideas what I may have done wrong?
Click to expand...
Click to collapse
sounds like a corrupt download... i would try downloading again. and/or run a adb logcat while it is booting if you could
How long does this take to load on first boot?
atoz350 said:
How long does this take to load on first boot?
Click to expand...
Click to collapse
5 mins 11 seconds to setup menu
atoz350 said:
How long does this take to load on first boot?
Click to expand...
Click to collapse
umm not to long at most 8-10 minutes...
ali3nfr3ak said:
5 mins 11 seconds to setup menu
Click to expand...
Click to collapse
you beat me lol how do you like it?
also trying this hero user conf on sense hero
i was just wondering if i could load this with haret off my memory card or do I have to do something else?