The Story of Bluetooth - Tilt, TyTN II, MDA Vario III General

Hey!
One thing that I find lets my T-Mobile Vario III down is how rubbish Bluetooth services are.
Can anyone recommend anything to help amend the following...
Speed of Sending - According to ObexInboxEx I receive files at around 90kbp/s and according to RESCO I send at around 20kbp/s anything to solve this?
Every time I send a file, I have to search for users, on my Alpine, paired devices came up instantly, anyway to correct/solve this?
I was able to set a bluetooth reciepient's nickname, can I do this now?
Maybe there is a piece of software that does these things or a ROM?
My ROM is Dutty's WM6.1 Hybrid (Latest Vers.)
I also run RESCO Explorer 2008 and ObexInboxEx.
Hope you guys can help me out!
Thanks,
Joe

Related

Suggestions for Essential Software & Accessories

Hello all,
First off, sorry for the long post, I'm sure it won’t happen again. :wink: I'm new to the forum & Cingular 8125. I had a Treo 700w for about a week but I got rid of it because of ActiveStink & Verizon's poor service in my area. Now I have a shiny new Wizard and am anxious to get it all dialed in. So far I have not purchased anything for it except the Plantronics 640 BT headset & BoxWave screen protector. I'm in real estate now, so I'm in car a lot and plan on getting TomTom5 & a vehicle mount. Easy access to call & e-mail contacts, hopefully sorted by FIRST name and using my own custom Outlook forms would be GREAT! Is this available anywhere?
:arrow: I guess what I'd like from experienced users is a brief list of really basic useful software & accessories that have been proven to work by you. Just basics, like backup, contact mgmt, SD mini cards, SmartKey(?), etc. In my brief Treo days I found a really useful thread on a Treo forum ( http://guide.treonauts.com ) that really helped me plan & budget for stuff I might add to the device, and it would be really cool if forums WM users could have a similar thread....maybe this can be it? :idea:
:?: Also, I've been reading a lot of threads about custom ROM updates here, which seem to be helpful to a lot of you, but it sounds like there may be a new "official" ROM from Cingular released soon, so I am not sure of whether I shoudl update my ROM right now. I don't work for a company with an Exchange server, so I just set my e-mail acct to check IMAP every 5 minutes. SO, the only feature I really want is voice dialing over BT. Is that (A2DP) part of the HTC ROM with radio vs. 01.16.11?
Thank you all, I really appreciate your feedback!
Voice Dialing via Bluetooth can be accomplished with the shipped ROM.
If you are happy with Cyberon voice dialer then you're already set, just record your voice tags.
For real voice recgonition, buy Misrocost Voice Command and find the Cab file or Registry Hacks you'll need to hi-jack the button ffrom Cyberon )posted many times in these forums).
For me the reasons to flash one of the 2.0 Roms: speed, stability, inproved battery life.

Palm O.S. Treo 650 to Tilt: SMS threaded text transfer?

So I'm going from a Palm O.S. Treo 650 to Tilt & I have alot of SMS threaded text messages that I want to transfer. I have no idea how. Any help would be greatly appreciated.
Ps. I'm no wiz at this stuff, so basic & step by step is super appreciated.
Thanks in advance for your help, guys.
Really, I am not sure, but have you tried to export to the SIM via Treo? And them maybe import from SIM to Tilt?
wow thats a good question.. im not sure how you would do that, i know nothing about the Palm OS structure... i can tell you that the palm app for ppc stores all the messages in the windows directory called "PalmMsgV001" .... if the palm os uses the same file then you could possibly copy it from the palm to the tilt. Not sure if that will work but thats about as much help as i can offer for this problem.
Well, I tried something....
I took the Palm's SMS log (SMS Messages2.pdb) and moved it to the TILT. I then renamed the Palm file to "PalmMsgV001" and tried opening SMS on the TILT. Needless to say, that didn't work.
I don't know?? Maybe there is something out there.
Right now I am sending a copy of the "PalmMsgV001" from my phone to the desktop and I am going to look at the file structure. I viewed the Palm's, so now I will view the Tilt's and see how much different they are.......
You guys rock! Thanks for the help. Let us know if you guys find a solution...
Anyone...?
Any ideas
I am also interested in making this work. Has anyone come up with a solution?
Hi, e'rybody.
So far, the Tilt is a piece of work. in the positive sense of the phrase.
Not that I've exactly done much with it. I was about to figure out how to transfer Contacts from the Treo 650 to the Tilt, but if anybody can just tell me before I go a-searching, that would be awesome.
I'd be EXTREMELY interested if anyone figures out the text-thread transfer quandary; I haven't even used texting on my Tilt yet, and I wonder: does it actually support text-threading? ...like the Treo? I don't see why it wouldn't. That was def one of the best features of the Treo for me.
I guess it all just depends on which formats the two devices use, and whether or not we can convert Treo's to Tilt's.
If anyone figures it out, we'd all be grateful if you came back here to clue us in, and I'll definitely do the same!!
G'luck!!!!!!

TomTom 930 SMS and profiles in Bluetooth

I see in CommManager Settings>Bluetooth>Profiles>Supported Profiles, alot of profiles. I have TomTom GO 930 with hands-free by bluetooth where I can make and receive calls...with 3G enable I can use the TomTom services (like weather, etc) but I have in TTom an option to read and send a sms and is not allowed because (maybe) fault another profile. Can you people say something about my request?!
Thanks
I would also like to be able to get my messages off my Diamond onto my TomTom, I have the GO 530 though.
Anyone able to help with this?
I have this same problem with car-ser Blue&Me (Fiat Bravo) - it cannot load sms from phone with windows mobile?
Can anybody help this (jetwaremobile nothing change). Mayby sombody can modify some settings to view effect?
I think nobody say 'I do...this' and we have a profile to read/send SMS in TomTom GPS
anything...?
http://www.tomtom.com/phones/compatibility/phones.php?brandId=22
It is not possible.....the full tomtom compatibility with bluetooth is only for few phones models
It's hard to tell what is or isn't compatible. Their list is ridiculously out of date!
evilskanker said:
It's hard to tell what is or isn't compatible. Their list is ridiculously out of date!
Click to expand...
Click to collapse
And where are your updated list?
i know for some years how works tomtom's pna and i can tell you the list is have a year old, if you read the small letter tt only test a little part of phones models, but the features not change so much........if you want have a hope, you can, sure.....
Bump! Kaiser and GO730
would love a fix for this if there is one yet
How you guys got your Diamond working with go930 ?
Hi Guys
I also have HTC Diamond and ToTom go930. I can not get them working together as a hands free. They paired together first time and after i maid my first call go930 rebooted and after that it does not want to dicsover or connect to my phone properly (or at all). Deleting and recreating profiles on both devices did not help.
Any suggestions ?
Thanks

Microsoft Voice Command V1.6.19971

I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
alanplum said:
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
Click to expand...
Click to collapse
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
pfcsabre said:
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
Click to expand...
Click to collapse
We removed the MSVC cab because it is a retail sold program, YES it was put into some official ROMs but after a LONG debate we decided to not allow it in cooked ROMs etc... just such a grey area we didnt want M$ finding another reason to have a go at xda-devs.
i had a feeling it will be taken out eventually, curiously though i was thinking why the guy was banned
MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Have you read post #3? MSVC is a retail sold program, if you want it please buy it.
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Does MSVC integrate and work with the fuze over bluetooth? I know that it needed several mods to work with both the 8525 and the Tilt.
Thanks
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
omaralt said:
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
Click to expand...
Click to collapse
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
jglev said:
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
Click to expand...
Click to collapse
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
ITNV said:
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
Click to expand...
Click to collapse
Yes. I wish it were that easy. As I said, all parameters are set up exactly like my Tilt which worked perfectly. With the Fuze, I only get my ringtone. Now, I know that the Fuze has a newer version of VC, so I may try to downgrade to the version that is on my Tilt.
omaralt said:
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Click to expand...
Click to collapse
I'm wondering the same thing. Stock Fuze had MSVC, and I flashed to the Elite ROM, and would like MSVC back. Is there any way to flash my Fuze back to stock rom, and pull the cab file out of it??
Unless you can tell me otherwise, the one that comes with the FUZE is defective. Partly... A few of us can't get it to say the incoming caller name or number. All you hear is a bell sound. I've gotten everything else to work like dialing from the headset, even where it says I have an appointment on my BT headset. Just for the announcement of whos calling doesnt work.
Do you have to have the handsset connect to juse VOice C`?
I pulled VC 1.6.19971 out of the AT&T Fuze ROM and included it in my personal ROM and I was able to enable "Announce incoming calls".
On my Nokia BH-501 headset, it begins to announce the call, but gets cut off by the built in headset ringtone. (I only use this stereo headset for music)
On my Oakley Razrwire it works just fine. With 'announce' turned off, the headset uses it's normal built-in ringtone. With 'announce' turned on, I get the VM announcement with my WM ringtone playing in the background (it opens an audio stream from the phone). I use this headset while driving, so it's all good.
Well well... depends on your MSVC-version. 1.6.4622 DOES NOT announce any incoming call regardless of the setting.
1.6.17913 does, 19209, 19213, 19214 does...
By the way: the ultimate FAQ was named The Definitive Guide for Microsoft Voice Command - I posted a backup in another thread.
anyhow, does anyone know the advantages of 1.6.19971 ? Does it report anonymous callers correctly (which none of the above does?)
And why is it that anyone wants to use newer versions without even knowing changes? Maybe it's a beta version, maybe it's buggy... but it's a newer release... using legal german retail (bought it) .4622 with 19209 exe for announcing reasons. Works brilliant on raphael.
But maybe someone knows a list of changes or fixes, advantages or disadvantages in 19971?
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
irus said:
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
Click to expand...
Click to collapse
Before or after installing cyberon? - After: Unpairing headset, repair and watch out having it set as default handsfree headset
HTH
MSVC in Dutch?
Hello all:
Is MSVC available in the Dutch language? Its kind of weird hearing my Dutch contacts' names pronounced in English. Funny, but still weird...

Help, Pocket e-sword squeeze mostly in 2009 ROMs

Please help, why pocket e-sword menu for book, chapter, and verse are squeeze in mostly new ROMs dated 2009.
This program was work perfectly in earlier ROM.
Any solution?
Same issue
I've had this same issue with the shrunk toolbar icons and misalignment of some of the controls. I'm not sure what the solution is.
One more
I've been using pocket e-sword since ages (dell x50v, Hermes, Kaiser, Raphael) and this is the first phone which has trouble displaying it. Actually my original 1.90.405.1 Raphael ROM did show it correctly, the trouble came with the official 5.05.401.1 upgrade in February.
I can confirm that EnergyROM 2.0 41609 also suffers, though e-sword was one of the first things I tried on it :-(
Maybe we should also bug Rick Meyers to try to see the cause of the problem. Hopefully all new WM phones, not just HTCs will be effected, so the pressure might increase. He upgraded the program when the new VGA PDAs came out.... The best Bible program in my opinion!
I sent him this bug report:
[greetings...] This February I upgraded my VGA WM6.1 HTC Touch Pro to a new ROM version, and e-sword appears garbled. As I've been searching for a solution to this problem I'm starting to realize the amount of people being effected, anybody with a newer HTC phone: VGA, WVGA alike :-( While we are trying to find a solution, I can imagine it might be a very little change in your program which could fix the problem... Maybe not...
The icons shrunk to quarter size, forms squeezed to half width (I'd gladly send screenshots, let me know if they would help). I'm still trying to use the program, but it's almost impossible. Maybe there's an easy fix. I'd guess it has to do with the screen metrics the OS reports to e-sword and the way e-sword then uses these values. People also think it could be related to .Net 3.5, but even if I force my PDA to use 2.0 it doesn't seem to fix. [greetings...]
Click to expand...
Click to collapse
I have the same problem. Thanks for informing Rick Meryer.
vgergo said:
I've been using pocket e-sword since ages (dell x50v, Hermes, Kaiser, Raphael) and this is the first phone which has trouble displaying it. Actually my original 1.90.405.1 Raphael ROM did show it correctly, the trouble came with the official 5.05.401.1 upgrade in February.
I can confirm that EnergyROM 2.0 41609 also suffers, though e-sword was one of the first things I tried on it :-(
Maybe we should also bug Rick Meyers to try to see the cause of the problem. Hopefully all new WM phones, not just HTCs will be effected, so the pressure might increase. He upgraded the program when the new VGA PDAs came out.... The best Bible program in my opinion!
Click to expand...
Click to collapse
Thank u Vgergo, hope Rick Meyers will able to fix it ASAP.
I agree that this is the best Bible program and its free.......
rvs97 said:
Thank u Vgergo, hope Rick Meyers will able to fix it ASAP.
I agree that this is the best Bible program and its free.......
Click to expand...
Click to collapse
hi Guys,
I've tried bugging Rick for a few months now and have had no reply. I think he's been busy with the E-Sword NET project
WizP said:
hi Guys,
I've tried bugging Rick for a few months now and have had no reply. I think he's been busy with the E-Sword NET project
Click to expand...
Click to collapse
I submitted the problem twice through the website with no reply. Sounds like he's got to be well aware of it by now.
I've got some commercial software that works ok, but it just doesn't function as well. Also, there aren't as many commentaries available.
I've been looking around for a solution to this problem as well. I have a Sprint Touch Pro; it works when I use the original ROM that came on the device, but on any other ROM from any kitchen that I've tried (including WM 6.5) this problem exists where the program seems to think it is on a QVGA device,. I've gone through the registry looking for the possibility that something has the wrong resolution encoded there, but I've not been successful.
There is a config file for the Pocket e-Sword itself; perhaps on VGA devices it sets a value in this file (for those cases where it works)? I'd rather not go back to the stock ROM at this point, so perhaps someone else can look at this file (\Program Files\Pocket e-Sword\Pocket e-Sword.config) to see if there is anything related to resolution there when it is displaying correctly?
I've emailed Rick Myers through their web site also, and like the others I've heard nothing unfortunately so far.
Confirmed
I can also confirm this on elite RC3 ROM for the Fuze.
Thanks for bringing this up, Im running the NRG Rom which is great but having the same issue. Esword working properly would make make the Fuze the best phone I have ever had.
Jeremiah 29:11
Zoidborg said:
There is a config file for the Pocket e-Sword itself; perhaps on VGA devices it sets a value in this file (for those cases where it works)? I'd rather not go back to the stock ROM at this point, so perhaps someone else can look at this file (\Program Files\Pocket e-Sword\Pocket e-Sword.config) to see if there is anything related to resolution there when it is displaying correctly?
Click to expand...
Click to collapse
I have an old backup of my memory card from the time pesw used to work. I cannot see any resolution setting in here.
older version
I have an older version that was on a memory card i bought. As I do not believe in god(s) u r welcome to it.
vgergo said:
I have an old backup of my memory card from the time pesw used to work. I cannot see any resolution setting in here.
Click to expand...
Click to collapse
I agree, the config file is just for storing personal settings. What we need is a response from RM. I've sent bug reports in the past and never had replies, which is a shame!
I'm glad someone mentioned that forcing .net 2 doesn't help I was about to try that!
Here are the ROMs I've tried that e-s has these problems with:
Official HTC Touch Pro Updated ROM
Elite ROM RC4
Shep's ROM 21222
Shep's ROM 21232
I haven't found a modern ROM that works as yet but if I do I'll let everyone know.
If only Pocket e-Sword were an open source project!
monkeyfishing said:
If only Pocket e-Sword were an open source project!
Click to expand...
Click to collapse
I also am annoyed that Pocket e-Sword is not an open source project. GRR..... I am another long term user of the program that can't now use it since I have a Raphael. My wife has the same problem as she now has a Diamond.
If anyone would like to contact Rick Myers directly, whois gladly provided his contact information, including a phone number. Who knows, it might work!
Code:
MEYERS, RICK
ATTN: E-SWORD.NET
c/o Network Solutions
P.O. Box 447
Herndon, VA. 20172-0447
Domain Name: E-SWORD.NET
Administrative Contact, Technical Contact:
MEYERS, RICK
E-SWORD
ATTN: E-SWORD.NET
c/o Network Solutions
P.O. Box 447
Herndon, VA 20172-0447
[COLOR="Red"][B]570-708-8780[/B][/COLOR]
Record expires on 12-Feb-2011.
Record created on 12-Feb-2000.
Database last updated on 30-May-2009 08:22:19 EDT.
e-word display problem
Hello,
I wanted to communicate you only briefly, that i contacted Rick and he work on the problem with the display.
Bye,
Tom
Great new to hear Rick is working on the problem.
Hopefully we get as well an update for the pocket e-Sword (the desktop version just launched a new version recently)
A new version has been released!
It solves almost all problems, the only thing left (at least on my Raphael) is that the bible text is WAY too large, even with the smallest font size selected. I've contacted Rick about it, hopefully he'll come up with something.
Pocket e-Sword for Windows Mobile 6 (VGA only)
http://www.e-sword.net/pocketpc/downloads.html
Pocket e-Sword for Windows Mobile 6 (VGA only) (v3.1.0) 4,452kb
Updated 06-22-09
Not tested it yet as I'm at work on a Mac but hopefully all is well now!
Thanks Rick! (If you're reading this?)
Update: Having now tested it on my Touch Pro running WM6.5, I can confirm that everything that was teeny tiny, is now as it should be - top marks! That said, the text size is abnormally large... hopefully Rick gets wind of this bug and fixes soon otherwise people will be reading over my shoulder on the train - maybe that's not such a bad thing!?
New version works on Touch Pro2
Hi all
I am using the new (VGA) version on my Touch Pro2 and it seems to work well. A couple of times it's not been able to open the bible and other resources but a soft reset solves this.
Cheers
andrew-in-woking

Categories

Resources