Hi,
Im new here, so i dont actually know if someone asked this before, so here i go
How can i prevent my diamond from using, gprs connection, for weather updates, opera, explorer, and ect.
Id like it to use wifi, for all those things but it seems he uses gprs for default, is there any settings to tell him to use wifi instead of gprs?
Thanks
settings->connections->connections->advanced tab->select network
pick the item in the dropdownbox's which are not called
my isp or something like that
then the phone cant use gprs until you set it back
There is a small app called NoData by MoDaCo which is allows do disable data connections
Rudegar said:
settings->connections->connections->advanced tab->select network
pick the item in the dropdownbox's which are not called
my isp or something like that
then the phone cant use gprs until you set it back
Click to expand...
Click to collapse
ok, this worked, but now how do i force weather updtates, to use wifi?
The diamond will choose to use the data-connection available. If wifi is enabled, that's what it will use, if not it will try to use something else. turn off auto update, and update the weather manually whenever you have wifi coverage.
ok,thanks for help, everything works as i want to
so anyway, one more uestion. how can i instal security sertificate into my phone? (*.cer )
Related
Ok, this was working fine on the original AT&T ROM, but since I flashed to dutty's ROM, I cant get it to work. How do I force the phone to use wifi for net access when wifi is turned on, as opposed to medianet? Currently, I have to keep manually switching from medianet to "my work connection" in connection settings.
You can use Kaiser Tweak to set it to disconnect the GPRS connection after a set amount of minutes of inactivity. Then, when you enable WiFi, it should connect ONLY to WiFi.
I think the OP needs to sort out his "work" and his "internet" instead of just trying to turn off radio data.
I have medianet set to internet and my wifi set to work...not really clear what "work" is....just want to automatically use wifi when wifi is connected, and cant find the option to do that.
Anybody???
I did set both connections to "work".
Additionally I added my tmobile gprs connection to the work profile.
All seems to work great.
I can acces my network shares over wifi and connect to the internet. When no wifi is available it connects via gprs.
I keep getting confused on this same issue. i installed the same rom we are talking about. it shows up for me when setting up email accounts. with my wifi turned on, it still tries to go out the 3g connection. I want it to use wifi if that is what is turned on and i think that was working on the death star rom. For the drop down that says "The Internet" I basically want that to point to wifi if on then fall back to 3g. How do we do that?
It should not be named "work".
So whats the solution here?
Under Connections....Select which networks are automatically used:
Programs that connect to the internet should connect using ???
I can either choose Medianet or my work network, I'd like for it to use wifi when available, how is this done?
Programs that connect to a private network should connect using ???
I have this set to my work network.
Easy Solution to 'Auto Wifi"
Buy an Iphone, works seemlessly, and you get a browser too which works, something these HTC phones havn't had in 3 years.
The easiest way to force wifi (since gprs can be acting as a ***** ), is to keep wlan enabled and to install the NOGPRS.cab (aka the modaco nodata plugin) which allows you to disable (but keep) the gprs settings and which you can toggle on (and back off) when needed.
Great little app, saves much annoyance!
Is there an easy way to toggle wi-fi on/off, that can be assigned to an icon or button? At the moment I have to open Comm Manager each time and do it from there.
Rob F
Hi guys
I've got a question regarding the diamond, though it could also be possible that this is only a windows mobile question. Is it possible to *only* allow data-connections via WLAN and *not* GPRS/UMTS/whatsoever? I want to use this thing at home and at university but how does the diamond know which connection it should use? I don't want any byte sent to my provider which is quite expensive. What happens if I open Opera and WLAN is not connected? Does it auto-connect with $money-printing-machine-for-o2 or does it then tell me "hey, you are not connected. try within a WLAN-cloud"?
Thanks
Tunnelblick
if you remove the isp settings for gprs/3g/whatever
it will never use it for data
Ah, thanks! This is what I always did with my old mobiles. I thought you had to do a magic dance with wm to achieve what I wanted.
Does anyone know anyway to get opera to ask which connection to use when I fire it up?
I have search already but have only found something about 'My Work Connection' but that does'nt work.
Like th OP stated but I need to keep the data settings so I can use them when WIFI is not available.
Thanks in advance
Creeky
Is there any utility like this?
Is there any utility, which will do the next:
If any program want to conect to internet it will ask me first how do I want to connect: Wi-Fi, 3g, GPRS? And I will choose...
I'm also looking for a solution for this problem.
Currently I has diabled the mobile data traffic by choosing an unconfigurated network at the "Programs that connects automaticly to Internet should connect with" screen.
This is fairy ok due to me rarly using other networks than wifi. But IF I do, I don't want to have to mess around with the network settings. I want an "choose your network" popup message.
I am trying to setup my Diamond so 3G only connects when I want it to. I've added the 3G button to the comm manager. Even with this set to off it reconnects when the web browser is opened.
I also have the advanced config manager installed with the Auto GRPS set to disabled but still the 3G connects automatically.
Does anyone have the same problem and/or know a fix?
It will connect whenever anything requests data, as far as I know, there's no way to stop this.
Thought there may be a hidden setting maybe in the registry that could stop this. It is annoying that the comm manager says 3G is off yet there is data connection after loading up the browser. And I'm sure it just connects even without actively requesting a data connection through the browser.
What happens when you set both options in Connections to use "My Work Network" and set your WLAN as your Work Network?
use no data
then this way you don't start it unless you want it to
hope this helps
liamhere said:
then this way you don't start it unless you want it to
hope this helps
Click to expand...
Click to collapse
Use no data? Am I missing something or is this as simple as it sounds!? Are you suggesting that by not using programs requiring data then I will not activate the 3G connection?
It certainly is a shame that upon activating a program requiring a data connection that you cannot select the source of this data ie. 3G, wifi etc or just cancel the request entirely.
if you want it to use wifi, simply connect to wifi before you launch the application. Windows Mobile is very different from Symbian in that way (Symbian will ask for each app).
Hello,
I have an problem. When i'm connected to Wifi and launch Opera, weather update or anything else which uses internet. The diamond makes connection with the 3G/GPRS network. The wifi is being ignored or something.
I thougt that i had seen this problem before on this forum, but i searched and can't find it anymore.
Does anybody know an solution or knows where i can find one?
Grtz
You can set network priority up somewhere, i'd be of more help but i don't remember where this is in settings
I have also been looking for a solution to set network priority as wlan first but cant find where to..
ident
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Hesky87 said:
I've been reading this site a fair old bit recently! First time i've been influenced to post though. I'd also love a solution to this. Does anyone know how to change priority settings? I swear i'd turned GPRS off, but whenever I check the weather or internet, it connects, sometimes even when I have a wi-fi connection active.
I wish to only use my Diamond with the wi-fi, don't want to get raped on the data charges. Any help would be greatly appreciated Thanks.
Click to expand...
Click to collapse
That's the exact issue i have! Its bloody anoying!
how about using NoData or from Advance configuration utilities in comm manager actually disabling all other connections ? i've been confronted with the same problem many times and rather use the available Wi-Fi over the mobile internet connections, so that helped me
That's not good enough for me. I have a databundle so when i'm not at home i wanna use that internet. But when i'm at home i want wifi!
I think i found the problem. When you make a connection with a wifi network you can choose between "internet" and "work". When you choose internet there's nothing wrong. When you choose work it doesn't make some kind of internet connection so programs fall back to the gprs.
I'm having the same problems. I'm having a data subscription so don't want to disable it in total. What I tried was go to wifi settings --> network adapters. Selected internet from the drop down box on top (work was default for me). But Opera still connects through 3G or G. What settings did you change exactly Rik_X?
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Rik_X said:
The settings that i changed is when you make a new wifi connection it asks if you want to connect as 'internet' or 'work'. You have to choose work.
With wifi networks allready configured you have to do the following:
Go to comm manager --> turn on WLAN and let it connect to the network --> then push settings --> Wireless LAN. Then go to Networkcards (in dutch its netwerkkaarten) (its under the SSID)
Then click on the connected network and change work into internet. Accept the setting and with a reconnect its works (for me)
Good luck
Click to expand...
Click to collapse
Dank je! This worked for me.
Moderators are working with the same
I am an amatuer with xda, as well as my pocket pc (I have the htc fuze{touch pro for att}), however I enjoy both and am learning more and more all the time about both. However I have not been able to find this, and was wondering if such a thing existed: a program to toggle between wi-fi and internet for other programs. You see, I don't have a data package, and don't like to pay for the internet. So I was just wondering if anyone knew of a toggle for something like that.
I'm in the same boat. I use this, and have it mapped to the PTT button. Works great.
I cliked the icon and it turned on my wifi. Is that all it does?
nbower said:
I cliked the icon and it turned on my wifi. Is that all it does?
Click to expand...
Click to collapse
Isn't that all you wanted?
DrzNight said:
Isn't that all you wanted?
Click to expand...
Click to collapse
Not really, don't get me wrong, I will use that app on my ptt button too because it is very useful, but I was looking for an app to change other programs kind of. It seems like other functions on the phone, such as downloading a MMS, or updating your email inbox require the internet. I didin't know if stuff like tat could be changed to wi-fi instead of the data connection
Well the best solution I know of would be to use Modaco's NoData (attached) which will disable any kind of data connection. Another thing I personally do is to go into the "Phone" settings and then "Bands" and select "GSM" for the top box and "Auto" for the bottom box. Basically that turns off 3G.
If you are connected via Wifi the Wifi connection will take priority over any other connection. So whenever I want to check my email for instance, I push the PTT button to turn on Wifi and then send/recieve and no data is used.
Hope that helps!
Eric03 said:
Well the best solution I know of would be to use Modaco's NoData (attached) which will disable any kind of data connection. Another thing I personally do is to go into the "Phone" settings and then "Bands" and select "GSM" for the top box and "Auto" for the bottom box. Basically that turns off 3G.
If you are connected via Wifi the Wifi connection will take priority over any other connection. So whenever I want to check my email for instance, I push the PTT button to turn on Wifi and then send/recieve and no data is used.
Hope that helps!
Click to expand...
Click to collapse
Yeah, that does, thanks a lot!
My experience with nodata have not been all that good. Since the wifi reciver is pretty weak I find that if I fall out of wifi cover the phone will connect with 3g even if I'm running nodata.
If anyone know about a program that both activates wifi AND deactivate all other means of internett connections that would be great. I'd rather surf for free on a wifi connection that have a low signal than to pay for surfing with 3g.
I'am also searching for such a solution. I use Exchange server sync for my contacts and appointments. This sync should not go over the Mobile Internet connection, i need it only in our intranet by using WLAN/WiFi
Regardless if WIfi is enabled or not: The Touch Pro tries to connect by Mobile Internet to the Intranet-Server(!), this fails, of course. When i disable the Mobile data connection on the connections settings tab, anything is fine.
In the advanced settings of the exchange server config, i found a drop down box for the connection. But all it shows is "Internet" meaning the mobile connection. The office/business connection (=intranet config) is not available there...