Database Develop

loud tone when pressing call end button

or any on screen buttons in the HTC dialer. anyone know how to get rid of it? its supppper annoying

A little more information would be helpful -
1. does this tone happen when you press a button while on a call?
2. if it does - does your other party hear it or only you?
3. what buttons does it happen on touch screen buttons or only the buttons on the front of the phone?
4. is this when you have speaker phone on or a headset or simply using the phone?
5. is it only when you hang up or any button at any time while on a call?
6. do the buttons make normal sounds when you are NOT on a call?
7. have you turned off sound on your buttons - have you at least tried this to see if it kills the problem?
Bill

when in the dialer go Menu->Options then Keypad: Off

ahh keypad tones off got rid of the annoying beep lol thanks! wish there was a way i keep the beep for the numeric keypad without the obnoxious beep that came out of the speakerphone part rather than the ear piece when backspace/ call history/ speed dial is pressed

jut realized it still makes the annoying noise when it connects to a call

i found that someone had my exact problem on a wings smartphone. they edited the registires in order to turn it off. i played arround with mine all day but no luck. here is the thread if anyone can apply it to a kaiser id be very greatful!
http://forum.xda-developers.com/showthread.php?t=356416

Vibrate AND Ring after Vibrate - Possible?

Subject No such standard function
Stardard has ring after vibration, but after ring started there is no vibration... but i need ring and vibration after vibration only...

On my Diamond I can edit it in registry (I'm not sure that it's always RingTone0):
Key- [HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
Entry - "Script"="v2w3v2c20av0pc250r"
In my example it vibrates twice and then vibrates and rings with increasing ring
For details about script's codes see wiki:Registry Ringtone Scripts
Good luck!

What if i just want 3 vibros for 3 seconds, and then usual vibro and full call ring?

try:
av1w0.1v1w0.1v1w0.1v0p10r

nice, about delays between vibro and vibro duration - i can hadle it
one problem exists after RING played - it goes back to 3 vibros...

try:
v1w0.1v1w0.1v1w0.1av0p10r
or maybe so ( with 2 sec delay between each repeat ):
v1w0.1v1w0.1v1w0.1av0p10w2r

i have done such thing:
av1.5w1v1.5w1v1.5w1v0pr
how to make that after ringing begin it will play 5 seconds with 25% percent volume, then 5 seconds with 50% and then rest the time at 100%?
NOT REPEATING RING FROM beginning i.e melody

Ringtone problem

Hi,
I have been having this problem for the last couple of days, for some reason the volume of my ringer has dramatically decreased to the point where i can't hear the phone ring when it's in my pocket (wasn't the case before). When i try to play the ring tone (it's a wave file by the way) using the media player the volume is normal and very loud, the same applies to when i play it from the settings->sounds&notifications the volume on the ring tone is perfect, but when i receive a phone call the ringer volume is cut down by more than half, i checked the ringer volume and it's set to the max, I also did a hard reset then restored my files using the sprint backup but the problem didn't get fixed, I tried using a different ring tones and the same happens. any help would be greatly appreciated.

There are three volume controls: System, Ring and In call Volume.
Have you checked the System Volume?
If you press up on the hard volume key, you'll see arrow on the top right to switch to the next vol control. Check there.
HTH

ringtone problem
yea all 3 volumes are set to the max level

ringtone volume problem
the phone has the original stock rom from rogers (canada) hope this helps in any way

Have you got any profile managers installed (G-profile, Phoneweaver etc)?

ringtone volume problem
no i dont have a profile managers installed... so i just noticed that when the phone start ringing and i dont pick up, a second before the phone stops ringing the volume of the ringtone increases to the normal level (then stops ringing), the increase of the ringtone volume happens for like a split second after the caller hangs up and the phone stops ringing. hope this helps in any way. Thank you

Sounds like you have a Ringtone delay problem, there are a couple of solutions.
1. Disable HTC dialer (and use the Winmo one instead), can be done using Advanced Configurator 3.3.
2. Try the CAB I've attached, remember to only use WAV as ringtone though.
I would also recommend adjusting Call Forwarding timing to 30seconds. Settings/Phone/Services/Call Forwarding and get settings.
Disabling the HTC dialer is probably going to be the best solution as the HTC dialer is a hungry resource eating monster but I would just try the CAB and adjusting Call Forwarding time. There are some other REG setting as well but I never found them useful.

[Q] Help With Volume and Keyboard Issues?

Hey everyone, just want to address a few problems with my new Captivate:
Volume:
-For some reason, adjusting the Media Volume also adjusts the In-Call Volume after saving the settings and going back into the menu. I've installed apps such as QuickSettings and Audio Manager in attempt to rectify the issue, but, to no avail, the higher/lower the Media Volume, the higher/lower the In-Call Volume is in the settings when I go to adjust them again.
-Whenever I use the AT&T numbers in my Contacts list (I.E.: to check minutes/data used etc.) the phone automatically turns down my Notifications volume after dialing the codes.
Keyboard:
-The Andriod keyboard has an issue with turning off caps if I hit the key immediately after tapping space. Doing so on the Samsung keyboard turns on caps lock. Annoying when I'm texting quickly and have to slow down just to capitalize one letter. :-\
Are these issues common, or am I the only one? Any known fixes?

I know that when I'm listening to music the volume goes up right before a call( because my Media Volume is not all the way up but my In-Call Volume is) after the call my media volume returns to its normal state after half a second of music replaying.
In short, I don't have that problem...

[Q] - Incoming call volume lowering after last update

Hey all,
I have a problem with my HTC One (M7) - after the last Android update it started to act funky. By default all my volumes (call, notification etc.) are set to maximum, then I receive a call, phone rings at set volume and after the call, the call volume lowers by itself to less than 1/3 of the original value. I have missed quite a few calls because of this and cant find a solution Has anyone else encountered this? If so, can you provide some info for getting rid of this problem? Thanks in advance

do you have "pocket mode" or "quiet ring on pickup" enabled in the sound settings?

I have pocket mode enabled and quiet ring on pickup disabled - but I dont think that is the case. Because this happens even when my phone is lying on the table display side up or even standing up leaning on books or whatever