Hi,
I have a k-jam and I was trying to update it to the custom ROM. it hanged at 98% and the update software crashed on my PC so I had nothing to do but soft resetting the device.
Now I cant restore to the original imate ROM and when I try to go to the USB mode it gives the colored screen and goes off immediately.
Please help...
hey i have had that problem stuck for 2 days, must be stressing eh?
hold camera + voice then push reset button for 3 seconds...keep holding the cam and voice button and wait for the screen to come on..then plug in.... usb shud show on bottom left..
i had that problem....couldnt get it to boot loader but after numerious tries, it worked.
It just needed some power
Wizard was totally discharged i recharged it and restored the ROM successfully
thank u
I've just tried reflashing my phone from WM6 to WM6.1. Unfortunately it failed and the phone now boots to a white screen (017TNYSTD rom for referance)
It won't connect to activsync.
The issue is I 'think' my camera button isn't working as I have had issues with it recently and as a result I can't get into the boot menu. Is there another way in other than camera+power & reset?
Any ideas or have I just bricked my phone??
Thanks for any help
Hi
my Charmer freezes during the Bootprocedure (IPL SPL GSM OS is showing)
I tried to upgrade to Charmer WM 6.1 by ChrBeck but when the os file is written the connection cuts :-(
what should I do ??
Anywhen I used a safe mode but i don't know how to get there.
Does someone know how ???
Thanks for help
OK i figured i out just press the Camera Button after you pressed the reset button
I just flashed my HTC touch diamond with ROM: EnergyROM_28011_DIAMOND_24.Dec.2009_Standard_Sense2.1
And it won't boot into WM, when I turn it on it says "Touch Diamond" in white letters with black background for about 20 seconds or so then it vibrates and repeats the same thing again. I have no idea what to do.. I have flashed my HTC about 10 times and this has never happened. I can't access it at all.. my computer will not recognize the device and the RUU can't connect to it either so I can't reflash it........... any ideas? Any help is MUCH appreciated
Hard Reset !!
You should go into bootloader mode to flash another rom (vol down + power on).
If its not solved by hard resetting/reflashing you should MTTY.
Hard reset with MTTY and reflash!
I bought an X1 from second hand with a cooked ROM. I then tried to flash another ROM with RUU. It stucks in 34% then error appeared. Following with RUU's recovery instuction, it got same problem in 39%.
I then tried to flash hard-SPL again with succeed. However, the phone reboots then stucks in the SE Bootloader Screen and can not be turned on again.
I found a strange problem which I couldn't even enter to the tri-color bootloader screen when my phone handed on.
(my phone is Sony Ericsson X1i)
Thanks in advance.
I can't even hard-reset my phone.
I am waiting for my battery charged upto 100%. Hopes it work.
seasonlau said:
I bought an X1 from second hand with a cooked ROM. I then tried to flash another ROM with RUU. It stucks in 34% then error appeared. Following with RUU's recovery instuction, it got same problem in 39%.
I then tried to flash hard-SPL again with succeed. However, the phone reboots then stucks in the SE Bootloader Screen and can not be turned on again.
I found a strange problem which I couldn't even enter to the tri-color bootloader screen when my phone handed on.
(my phone is Sony Ericsson X1i)
Thanks in advance.
Click to expand...
Click to collapse
it can't be turned on because there is no OS installed on your phone now, take your sd card out and place an rom image renamed to kovsimg.nbh in the root of your sd card through te pc. put it back in your phone, just start and it will enter bootloader again, and (if everything gone as it should be) it will open kovsimg.nbh, press power button, and wait
Thank you for replying my post.
But the problem is I can't even enter to tri-color screen by holding volume down and power.
Any advice? Thanks.
seasonlau said:
Thank you for replying my post.
But the problem is I can't even enter to tri-color screen by holding volume down and power.
Any advice? Thanks.
Click to expand...
Click to collapse
what does your phone do now when you start it then?
It stucks in the SE Bootloader screen.
seasonlau said:
It stucks in the SE Bootloader screen.
Click to expand...
Click to collapse
I misunderstood you, tri-colour screen is the bootloader/SPL.
Your stuck on the SE logo booting screen..
I'm very sorry, but i really have no idea, how you could fix that..
If you can't get in the tri-colour screen, then there is nothing you can do.
sorry
maybe someone else can help you
Thanks for prompt reply.
But do you think X1 require 100% fully charged battery to enter the tri-color bootloader?
no it doesnt need to be 100% charged
What happens when you connect your x1 through usb with the computer?
Does your pc recognize the x1?
same problem, x1a dead , the pc recognize "Microsoft USB Sync",
If you've already Hard-SPL'd your device, chances are if your device gets recognized as Microsoft USB Sync (Even if activesync won't start) you can use the ruu_update tool to send the rom to your phone. This process (if successful) will automatically boot you into the tri-color screen approx 2-3 minutes in.
Hope this helps, and Good luck
For advice or help on flashing roms, please post your query in this thread
Thread closed