Related
OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.
about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66
should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks
whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.
woot it works! thanks
zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.
Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.
genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?
All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!
Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help
i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery
MOD EDIT HDuser 02/01/09
This page has gone wiki and can be found here.
For a better understanding it is recommended that you read all 3 parts under "Flashing - Changing your device to a new version or language" on the main wiki page found here
END MOD EDIT
so, yeah, why not do one for this device too
[size=+3]UPDATE: Hard-SPL released![/size]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]23/04/09 -
UPDATE: New version will work on SPL 1.54 or above ROMS!!!! [/size]
so I of course changed the 1.56 rom wiki accordingly to that. (someone can review it if they want)
many thanks to testers for testing!
[size=+1]Donations are always appreciated to the big link in our signature ("elite project"). Thank you!![/size]
Preparations:
0) this package is for Blackstone devices. for any BLAC***** now (SSPL loader checks this).
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked. please answer with Yes as fast as you can!
5) some notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
6) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
7) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
8) SPL flashes, device automatically reboots, job done.
9) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.14.OliNex or for new version 1.56.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
*important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual SSPL method.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as that SPL causes the screen not to turn on after a resume. (maybe solved one day ). so currently, MFG SPL can strictly be used for development and hacking.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter tricolour screen mode anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
general usb connection error problems if you get connection error in RUU after the device goes to 1.07.Olinex screen, then
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but HD still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
HD specific USB or connection errors:
- as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
other issues if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package from this post. (currently 1.13, 1.14, 1.15, 1.54)
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
[EDIT 17-12]
Congrats on releasing this HSPL.
Now the cooking and flashing can begin.
[/edit]
the-equinoxe said:
[SIZE=+2]MOD BREAK[/SIZE][SIZE=+2]
[/SIZE]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[SIZE=+2]Warning: those who leak the testversion will be banned, no exeptions![/SIZE]
Click to expand...
Click to collapse
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!
dharvey4651 said:
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!
Click to expand...
Click to collapse
Don't have this phone either, but like you (and most seniors) I do respect the efforts of Olipro and Cmonex (and alike).
They have contributed a lot for our community.
BTW. The honour for the Wizard HSPL goes to Olipro (as always), it was his patching that made the thing work (who's else )
Neh, i'll wait for the public release. I've seen enough horrible failures with HTC devices already when alpha testing
Good job cmonex and Olipro!
have HTC Blackstone SPA firmware to test... waiting for HSPL !
Olipro and Cmonex: the best!
Thanks to all mods
Congrats to all moderators who are doing fantastic jobs, dont have the phone yet but thanks guys, U all rocks
Yeah finally!!
Let the tests go fine and the flashes begin!
Great job man, many thanks!
Cheers.
Waiting patiently for the public release as well. Great job guys, once this gets wrapped up a world of rom cooking will open for the already great HD.
Thanks, please do let us know if we can be of any help!
Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks
And guys
Please lets use the thread to check what has been done as I don't want to read through 18 pages of "I am waiting" to read about what has not been done.
Like I said, help us help you.
HDUser said:
Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks
Click to expand...
Click to collapse
sure thing, I have a little spare time right now so I will contribute with you guys, just step one so far.....
I think I did step one, please feel free to correct or improve anything, glad to be of any help, cheers.
the-equinoxe said:
[size=+2]MOD BREAK
[/size]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[size=+2]Warning: those who leak the testversion will be banned, no exeptions![/size]
Click to expand...
Click to collapse
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.
skywalkeret said:
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.
Click to expand...
Click to collapse
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL, and I don't believe that EVERY EACH HTC OWNER or FANS would like to hear this sort of stuff?!
It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.
raphael_ding said:
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL. It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.
Click to expand...
Click to collapse
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.
Re: Raphael_ding
hey, ding. i got you. I must say, world is just like a box of chocolate. you dont know what you gona get lol. they just did it.
me? yes, im just waiting for the original olinex's NON-BETA version lol
again. thanks olinex's hard work. you let me flash a lot of ROM on my S1, TOUCH PRO, ....and my future HD.
skywalkeret said:
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.
Click to expand...
Click to collapse
THX, Skywalkeret, what we can do is to post sth. and let those guys know about what they are doing. And better ask forum moderators to eliminate those leakege threads ASAP.
Cheers
I bought a new device and when I tried to upgrade it with an unofficial ROM I couldn't do the step of upgrading SPL and the indicator stayed stop at 0%
My Device boot loader shows :
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have tried all Hard-SPL Standard and Developers versions but I got the same result stopping at 0% including the RUU_Signed.nbh which is designed especially diamond came with 1.93 SPL originally
Please help me
fofo1881 said:
I bought a new device and when I tried to upgrade it with an unofficial ROM I couldn't do the step of upgrading SPL and the indicator stayed stop at 0%
My Device boot loader shows :
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have tried all Hard-SPL Standard and Developers versions but I got the same result stopping at 0% including the RUU_Signed.nbh which is designed especially diamond came with 1.93 SPL originally
Please help me
Click to expand...
Click to collapse
You have Hardspl installed already. You don't need to overwrite it again.
Kevbodian said:
You have Hardspl installed already. You don't need to overwrite it again.
Click to expand...
Click to collapse
But also when I try to upgrade directly with any cooked ROM I face the same problem
the upgrade stops on 0%
Plz help me if u have any idea
THX
What you show is the shipped SPL - so you will only be able to use offfical (if branded) operator customised ROMs.
more info to follow... (just on the phone)
There is a sticky thread about this problem
http://forum.xda-developers.com/showthread.php?t=409425
Just a tip..read that and your problem is gone
fofo1881 said:
I bought a new device and when I tried to upgrade it with an unofficial ROM I couldn't do the step of upgrading SPL and the indicator stayed stop at 0%
My Device boot loader shows :
DIAM100 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
I have tried all Hard-SPL Standard and Developers versions but I got the same result stopping at 0% including the RUU_Signed.nbh which is designed especially diamond came with 1.93 SPL originally
Please help me
Click to expand...
Click to collapse
If your phone shows this info after you flash hard-spl in your device, you dont have hard-spl in your device at all, so flash that first
you should seen 1.93Olinex forexample if u have flashed the 1,93unsigned hard-spl
R3PUBL1K said:
What you show is the shipped SPL - so you will only be able to use offfical (if branded) operator customised ROMs.
more info to follow... (just on the phone)
Click to expand...
Click to collapse
My device is not branded....
Do u mean that it will never accept upgrading to coocked ROMs ?
DO u think that there is no method yet ? or we will find new methods in the future ?
alas
fofo1881 said:
My device is not branded....
Do u mean that it will never accept upgrading to coocked ROMs ?
DO u think that there is no method yet ? or we will find new methods in the future ?
alas
Click to expand...
Click to collapse
No I am not saying that - If you dont have either OliNex or Jockeys HARDSPL then you could only use offical ROMs....etc etc...
So you really need to sort this issue out then you will be free to load any cooked ROM depending on your region
Remember that OliNex's SPLs have protection in them so that you can only update while you machine is connected via activesync.
When you try and Run the olinex SPL then you should get a popup on you devices screen asking you to confirm you want to run this application. Do you get this far?
Have you tried Jockys?
R3PUBL1K said:
When you try and Run the olinex SPL then you should get a popup on you devices screen asking you to confirm you want to run this application. Do you get this far?
Click to expand...
Click to collapse
I've done that but it was useless and I've got the same problem 0%
R3PUBL1K said:
Have you tried Jockys?
Click to expand...
Click to collapse
I have not heared about it also i couldn't find it in the forum
would u lead me please ?
fofo1881 said:
I've done that but it was useless and I've got the same problem 0%
I have not heared about it also i couldn't find it in the forum
would u lead me please ?
Click to expand...
Click to collapse
Try here JOCKY
omar 1958 said:
Before flashing Olinex Hardspl you need to do three things:
1. Download Net framework Compact from herehttp://www.microsoft.com/downloads/details.aspx?FamilyID=e3821449-3c6b-42f1-9fd9-0041345b3385&displaylang=en Connect device to pc and wait for Active Sync to finish. Now run the download and follow instructions, make sure to install to device and NOT to storage. Reboot your phone.
2. Download and install Cert_SPCS. (Attached).
3. Download and Install EnableRapi. (Attached). On installation of this, your phone might come with the comment that this file is already on the phone and installing this file will remove the old one, accept the new installation and reboot.
Having done the above, you are now ready to flash HardSPL. For further help read this http://forum.xda-developers.com/showthread.php?t=476738
Good Luck this time round.
Click to expand...
Click to collapse
Never had to this before - but I've never had any issues flashing Hard SPL to devices - over 50 different handsets
Hey, I gotta apologize for my above post. I read the 1.93.000 as 1.93.Olinex.
R3PUBL1K said:
Remember that OliNex's SPLs have protection in them so that you can only update while you machine is connected via activesync.
Click to expand...
Click to collapse
What do you meen? I have olinex1.93 and never use Active sync to flash a rom (or start AC), I put my phone in bootloader manualy and flash. Or is Ac startup even is this situation?
omaga said:
What do you meen? I have olinex1.93 and never use Active sync to flash a rom (or start AC), I put my phone in bootloader manualy and flash. Or is Ac startup even is this situation?
Click to expand...
Click to collapse
I was trying to explain that don't try flash (another) SPL using HardSPL as olinex one has overwrite protection.
Flashing ROMs this way is no problem - but not recommended
Upgrading is not possible
R3PUBL1K said:
I was trying to explain that don't try flash (another) SPL using HardSPL as olinex one has overwrite protection.
Flashing ROMs this way is no problem - but not recommended
Click to expand...
Click to collapse
I found that this new version of devices is HardCoded with original HTC-SPL
So its seems that upgrading to unofficial ROMs is not possible yet ...
thank u all for your concern
R3PUBL1K said:
I was trying to explain that don't try flash (another) SPL using HardSPL as olinex one has overwrite protection.
Flashing ROMs this way is no problem - but not recommended
Click to expand...
Click to collapse
I have Olinex 1.30 and have previously upgraded from ROM 1.34 to 1.93. However, I have tried upgrading the ROM to 2.03.831 but it doesn't work.
Do I need to upgrade the Hard SPL to 1.93 signed? Where can i get the file?
Thanks.
Hello,
try the "RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip" from THIS thread as this was the only one that worked for me. I recently flashed a O2 branded Diamond and was also about to give up...it was my last try/chance and eventually I succseeded in flashing any Diamond ROM until 100%.
...bye DonQ
does it means I have to overwrite my HardSPL 1.30 signed?
Got a new Diamond and same issue, can not hardSPL1.93 Olinex over this new original SPL 1.93.000
Hey I succeeded to work this out!!
Here's what I did:
Download this file: Unsigned-Hard-SPL-Diamond-OliNex.zip
and this: RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (you can choose another developer version such as HardSPL_Olinex137_Unsigned.zip)
Now copy the file RUU_Signed.nbh of seconde archive to replace the one in the first archive. Then run the ROMUpdateUtility.exe of the 1st archive. As the moment the percentage bar appears, run the SSPL-Manual.exe of the 1st archive from your PDA (of course, this file must be copied to PDA before via ActiveSync).
Just run again ROMUpdateUtility.exe if you have a phone not responding error.
Then there you go...
4fun00 said:
Hey I succeeded to work this out!!
Here's what I did:
Download this file: Unsigned-Hard-SPL-Diamond-OliNex.zip
and this: RUU_Signed_1_93OliNex_HSPL_UnsignedEdition.zip (you can choose another developer version such as HardSPL_Olinex137_Unsigned.zip)
Now copy the file RUU_Signed.nbh of seconde archive to replace the one in the first archive. Then run the ROMUpdateUtility.exe of the 1st archive. As the moment the percentage bar appears, run the SSPL-Manual.exe of the 1st archive from your PDA (of course, this file must be copied to PDA before via ActiveSync).
Just run again ROMUpdateUtility.exe if you have a phone not responding error.
Then there you go...
Click to expand...
Click to collapse
Ok now, I got the same situation as described above, but the phone's software won't boot. I can just put it in the bootloader mode. I cannot put the SSPL Manual file on the device. How do I reflash it then? USPL said that this version is not supported. Any ideas? Thanks for any input.
well, Hard-SPL is released now! sorry for delay, this was ready last week, but I did not have a chance to get to my PC much.
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]Donations are always appreciated to the big link in our signature ("elite project"). You can also donate via the link offered in the new Hard-SPL program. Thank you!![/size]
[size=+2]EDIT: ATTENTION - I removed the V3 version, everyone who flashes new version (2.32.OliNex) on 1.40 stock ROM, should simply upgrade to a new 2.xx ROM afterwards.
also, new version of HSPL package (V5.2) is here which has some of the issues fixed.[/size]
Preparations:
first an important note, if you want to flash more than one Jade, contact cmonex for additional licenses via http://support.htc-unlocks.com. (the first license is transparently granted and free, so normal users do not need to worry.)
0) this package is for Jade (Touch 3G) devices. for JADE100 so far (SSPL loader checks this and gives a warning), apparently JADE110 is also ok, but if your ModelID is different, contact us for testing!! we will happily help. contact by posting in this thread or by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently. until then, JADE110 etc is also accepted if you click "yes" to continue but it's your own risk to take.
1) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download latest Hard-SPL package (currently v5.20) from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) NEW: internet access is required as the program checks online for updates and license.
4) run Jade-Hard-SPL EXE on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is strongly recommended, on XP administrator login is required. important: if your AV (norton/symantec mainly) warns about a virus, ignore it, it just doesn't like the packer I used to pack the program.
5) if possible, always use Automatic flash mode (for uses of Manual mode, see troubleshooting section)
6) it will ask you to wait while it prepares for the flashing, press OK. follow steps in the program and then in the RUU.
7) some notes: it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred).
more notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
8) device should go to a tricolour screen now that says 1.40.1000 (not .0000!!!), this is the SSPL version, which is temporary.
9) SPL flashes, device automatically reboots, job done.
10) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.32.OliNex, which is the Hard-SPL version.
if it is 1.64.xxx instead then please make sure you actually download last version (v520) and flash using that. 2.32.OliNex is the correct Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 3: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or customRUU if you need to flash cooked ROM.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
Manual flash mode for USB issues: you should usually go for Automatic flash mode; you must only attempt the Manual mode option if Automatic flash mode or SSPL-Manual.exe already put device in SSPL tricolour screen and you got USB issues. any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
ModelID checking:
- if SSPL loader says it's for a different device, please contact cmonex in PM for testing SPL on that too. check modelid by entering SPL tricolour screen manually and note what it says (JADE100, or something else).
nothing happens on the device, does not enter tricolour screen mode:
- anyone having problems with the device entering SSPL automatically, please make sure you watch the device screen if it asks about running files. also try unchecking advanced usb functionality in settings.
- if it crashes instead of entering SSPL, you need to use Automatic mode.
general usb connection error problems if you get connection error in RUU after the device goes to 1.40.1000 screen:
- try manual SSPL: copy SSPL-Manual-Jade exe to the device and run it, then when it went to 1.40.1000 tricolour screen and shows "USB" at the bottom in this screen, use Manual option in the Hard-SPL program on the PC.
- make sure device was still synced via USB to the PC at the point of it entering SSPL (the 1.40.1000 screen)!
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but device still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
other issues:
- if Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- if device reboots instead of going to SSPL screen (1.40.1000), contact us by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!:
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
+1. [SIZE=+2]WARNING!!! do not flash 1.40 STOCK SPL on a 2.xx ROM!!!![/SIZE]
1. take the SPL relocker attachment, and run the EXE - this will flash 2.32.0000 stock SPL. simple as that!
(or if you want to manually pick an SPL version, then take a stock spl attachment (1.40 or 2.32), extract file and put it in customruu folder or any other ruu package and make sure you overwrite any existing RUU_Signed.NBH and delete any other *.NBH files in this folder)
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 1.40.0000 or 2.32.0000. if 1.40, then stock ROM must be 1.40.xx too, if 2.32, then must be 2.32.xx.
credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> EXE program concept that runs on the PC, Hard-SPL concept,
cmonex -> new PC EXE & SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
Updates:
MOD EDIT:
Hard SPL V2 Uploaded for Olipro: Server issue should now be fixed.
EDIT by OliNex:
v2 removed, hardspl in it was not the final one. everyone who used v2 to flash hardspl, please update to newest one.
EDIT by OliNex:
v41: new Hard-SPL, 2.32.OliNex, you do not need to update this currently.
EDIT by OliNex:
v520: new Hard-SPL, fixes some stability issues, if you already have 2.32.OliNex from v41, you do not need to update this Hard-SPL.
Nice work again guys
I can now close all the request threads
*Stickied*
Ta
Dave
Touch 3G Hard-SPL
Touch 3G Hard-SPL, Thanks!!
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
in bootloader my device is
JADE064N
SPL-1.40.000
MicroP-Jade (led) v5
here the same
i will tray it from a other PC because it appears the second time, on the first i got something like "server not ready" but reading your post i guess it will also not help.
anyway thanks to the olinex and i'm sure they will help us later
huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Click to expand...
Click to collapse
yeah i hope so, maybe next version will help us
anyway thank you very much
It does not work
My jade is MODEID is jade100, but this hard spl does not work
hmmmm i tried it ... but first time he said Server not rechable try again later...
later he said that i tried it before and it seemed to be commercial ....
But i only unlocked my MDA 4 a long time ago ...
so my Jade German Version has no HardSPl snifffff...
Michael
GOOD WORK Mr. Olipro & Mr. Cmonex
I'll try on the Jade t3232 brown german edition today, and post
the result asap.
Anyone got an italian shipped rom? it will be much appreciated
in Italy i've seen the blue edition and the black edition, maybe they're suitable
for a rom dump...
c ya soon
huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Click to expand...
Click to collapse
same huysanhdieu.
in bootloader
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
jatekung said:
same huysanhdieu.
in bootloader
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
Click to expand...
Click to collapse
Same here...
Unable to install Enablerapi.cab and after that same as others peoples "hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
Some here
Originally Posted by huysanhdieu
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Hi all,
The need of Server connection does not give me any confident.
Is there anyone having heard about such necessity during Hard Spl operation?
I think, it should be explained for the satisfaction of Jade owners.
Many thanx Olinex team... But unfortunately it seems that there is a problem with Jade-Hard-SPL_V1.exe
When I try to run it, it shows nothing...
For no_more_sm
If you are running windows vista, right click on the archive and then "run as administrator", the archive run properly but doesn´t work
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
same here.
Anyway, I don't like the fact that we have to connect to the internet to do it, and I will not do it (given also that nobody reported having succeeded!)
huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only, we have detected that you appear to already have unlocked a device, if you wish to unlock commercially"
Click to expand...
Click to collapse
I have the same. Jade-Hard-SPL_V1.exe is not working on my device.
In bootloader:
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
Program always say: "Server appears to be down..."
PLEASE READ THE *FAQ* BEFORE ASKING QUESTIONS!!
IF YOU HAVE A CDMA DEVICE THEN GO *HERE* FOR INSTRUCTIONS ON HOW TO HARDSPL
IF YOU NEED TO HARD RESET OR ENTER BOOTLOADER YOU CAN FIND INSTRUCTIONS *HERE*
Before starting, backup anything you might want to keep after the new Rom has been flashed as all contacts, emails, texts, notes, Internet BookMarks WILL be lost!!
PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)
*ONCE YOU HAVE FLASHED A HARDSPL ITS PERMANENT. YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the Screensaver activate*
Any of these can lead to a bad flash and possibly brick your phone
*FLASH HARDSPL BEFORE FLASHING ANY CUSTOM ROMS*
1. YOUR DEVICE MUST HAVE AT LEAST 50% BATTERY POWER FIRST BEFORE ATTEMPTING EACH STAGE
2. FLASH HARDSPL
The Original HardSPL Thread is *HERE*
IMPORTANT: Each user gets 1 license, or perhaps 2-3 on request if needed (valid forever and works as transparently as possible, so it won't be a problem at all)
you can send a request for 1-2 more devices for private user (free) at http://support.htc-unlocks.com (ONLY at this link, not in PM).
NOTE1: This package is for Rhodium (Touch Pro 2, not the original Touch Pro) devices. CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids), that will have its own HardSPL later. This HardSPL supports WM6.5
NOTE2: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
Flashing via ActiveSync with USB Lead (thanks to OliNex)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable and it must not be in Flight/Airplane mode (i.e. radio should be on)
3. NEW: Internet access is required as the program checks online for updates and license
4. Run Rhodium-HardSPL_V2_00R3.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). XP requires Admin logon and Vista/Windows 7 will automatically prompt to allow it to run in Admin mode, allow it. If you get an AntiVirus warning please ignore it, it contains no harmful code (just used a packer to compress it).
5. Follow steps as prompted in the HardSPL program. If this is the first run of HardSPL on a device after Hard Reset, you must select Automatic Flash Mode (first button in Welcome Screen)
NOTE: You should usually go for Automatic Flash Mode. The Manual Flash option is only to be used as noted below and you must only attempt the Manual Mode option if Automatic Flash Mode or SSPL-Manual.exe already put device in black screen. Any other errors triggered while running in Autoflash Mode will have to be fixed as instructed in the error message.
6. It will ask you to wait while it prepares for the flashing, press OK
7. Now it should go through without any error messages, if one does pop up then follow the instructions included in the error text. If no specific instruction is shown then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred)
8. At this point the phone hopefully went to a black screen (reporting version as 1.01.C-SSPL only using "info 7" in mtty), this is the SSPL version, which is temporary. Then RUU will instantly launch
9. NOTE: When RUU says it will Hard Reset do not worry, it is not going to do that. Also when it says the flash will take 10 minutes ignore that, it will only take a minute or so
10. SPL flashes, device automatically reboots, job done
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
NOTE1: This is unsigned HardSPL. No limitations on flashing ROMs (except of course some Radio roms). Also this has overwrite protection against HTC RUU's overwriting HSPL with a stock one. See steps in the Original thread about how to reflash stock SPL.
NOTE2: Anyone having USB problems with the device after it enters SSPL mode, download SSPL-Manual-Rhodium.exe, copy it to the phone and run it. Once the screen has gone black, run the HardSPL package on the PC and select Manual Flash option.
*IMPORTANT* Make sure that the USB cable is plugged in and device is synched to Windows Mobile even if doing manual method.
NOTE3: Do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! Nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. If you want to flash another rom then use shipped RUU or Rhodium customRUU if you want to flash cooked ROM.
3. DOWNLOAD AND FLASH YOUR PREFERED ROM
NOTE: Check the Roms Thread for any specific Flashing instructions. If there arent any then you can use the following guide.
Flashing Via ActiveSync
1. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!!
3. Turn phone back on and wait until it syncs with your PC
4. Run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Turn phone back on and set up as required
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
4. FLASH PREFERED RADIO (OPTIONAL)
For more information about compatible Radios go *HERE*
Flashing Via ActiveSync
1. Sync your phone with the PC
2. Run CustomRUU.exe from the Radio's Folder and follow the instructions (if one isnt included then download it *HERE*)
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD Card
5. JOB DONE. Well Done YOU DID IT!!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
FAQ for Flashing your First Rhodium Rom
FAQ
1. What Operating systems are supported for Flashing HardSPL?
Supported OS versions: 32bit and 64bit XP, Vista, Windows 7RC and later. win2000 was untested, and pre-RC win7 (lower than build 7100) is explicitly not supported. Also the program may be unstable or not work on Virtual systems, so it's recommended to try outside Virtual OS software. Also version verify: if HardSPL package says V120R in first Welcome dialog title (and version 1.20 in About box) it is the latest version, not some crappy beta/old version.
---------------------------
2. Why is it recommended to remove the Sim Card and microSD Card before Flashing?
microSD Card removal is recommended just in case any self booting programs or UC setup files are on there that might interupt or conflict with the setup procedure after flashing.
Sim Card removal is recommended because as soon as your phone reboots after flashing your phone will be live and if you get a call or text message during the initial setup it might interfere and ruin the setup.
If you flashed with both the cards in it should be fine as long as none of the above situations happened. Just be aware for future flashes
---------------------------
3. What are the different types of Unlock? (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device (radios intended for your device only need Hard SPL) - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash Hard SPL instead. Hard SPL lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. The stock SPL's only let you flash signed ROM images that match the CID & Model of your device. N.B. the CID is the carrier ID (e.g. HTC__001, or VODAP100).
Also, SuperCID is setting your CID to a value that allows you to flash other signed (shipped) ROMs, even if the CIDs are different after removing Hard SPL. - SuperCID is performed by the Olipro unlocker.
---------------------------
4. What is the difference between ROM and RADIO?
The Rom is the operating system and included patches, tweaks and programs. The Radio is a seperate part of the firmware on the phone that handles all communation related matters such as signal, gps, bluetooth, camera, wifi and sound. Newer Radios to include improvements or fixes in older version, or even just to compliment an existing Rom or network so a newer Radio isnt neccessarily better. Radios also need to be matched to the correct Rom so you cant just put any Radio and Rom together.
---------------------------
5. How do Stock ROMS differ from Cooked ROMS?
Stock Roms usually have extra 'bloatware' added which take up extra space on the phone. Custom Roms are stripped down to provide more space and most are tweaked to provide a faster more stable Operating System. Every chef is different so you have to look around the forums to see which Rom is best for your needs.
---------------------------
Post #3 for mskip
Post #4 for mskip, just in case
Great post for people thats new
Nice one Mark.
Dave
i have to say, that no matter what color font, special &$^#%@ that you use, someone will NOT follow the directions. This is a VERY in-depth guide!
slimsuse said:
i have to say, that no matter what color font, special &$^#%@ that you use, someone will NOT follow the directions. This is a VERY in-depth guide!
Click to expand...
Click to collapse
Too true....I remember how scared I was when doing my first flash on my Wizard though. Somethin like this at the time would have put my mind at ease (would have probably scared me to death even more at the same time! ).
It's funny how, with experience, that fear fades away and you just flash as if you've been doing it all your life. Some people will learn the hard way...others will read, read, read like I did many years ago! (as they most definitely should)
Nice post mskip.
When flashing a new ROM via Active Sync, is it really necessary to remove the SIM-card and SD-card? I didn't and the flashing did go well. No problems at all!
Just extra precaution against wiping your cards out or God forbid getting incomming phone signal during flash and having that interfere!
slimsuse said:
i have to say, that no matter what color font, special &$^#%@ that you use, someone will NOT follow the directions. This is a VERY in-depth guide!
Click to expand...
Click to collapse
Unfortunately flashing HardSPL on a Rhodium is a very in depth process and no shortcuts can be taken for the safety of the phone.The purpose of this guide is to give someone the whole process from flashing HardSPL to changing the Rom or Radio and save them having to keep 4 or 5 screens open with all the different information.
I remember when I first flashed my OLD Hermes many many years ago (god that makes me sound old haha) I was trying to pull all the information I needed together and ended up with over 15 pages all with different information and different methods on how to do the same thing and it took months off my flashing life.
I only made this up last night and the HardSPL information is taken directly from the creators thread. I will go through the HardSPL section and try to "dumb" it down so its easier to understand but if people want to customise their device then they HAVE to be prepared to follow all the steps to the letter and not complain that its too hard or too in depth.
This is the third one stop flashing guide I have written and the other ones have helped thousands of people flash their phones, the fancy fonts and colours are just their to help point things out
Any improvemants or additions are welcome (although my 10000 character limit has already been reached so if I add something then something else has to be taken off)
no problem to flash an official rom later?
you talk about : "CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids)"
i'm the owner of the european htc touch pro 2, is it supported or not? thx
admix said:
no problem to flash an official rom later?
you talk about : "CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids)"
i'm the owner of the european htc touch pro 2, is it supported or not? thx
Click to expand...
Click to collapse
Yes.
Dave
admix said:
no problem to flash an official rom later?
you talk about : "CDMA-GSM worldphone version is not accepted (RHOD400, RHOD500 modelids)"
i'm the owner of the european htc touch pro 2, is it supported or not? thx
Click to expand...
Click to collapse
Once you have HardPSL on your phone then you are free to flash Official or custom Roms as you desire.
Im sure the Touch Pro 2 is supported but if you are unsure in any way then ask in the developers thread.
Ok I've got a question. In the starting post is sais that the HARD-SPL is permanent. Is it really permanent, or can you change the HARD-SPL later on when updates are brought out?
I guess it is permanent in a way that it won't be removed after you reflash you device. But it can be altered right? (Because there are updates brought out for HARD-SPL also
quarintus said:
Ok I've got a question. In the starting post is sais that the HARD-SPL is permanent. Is it really permanent, or can you change the HARD-SPL later on when updates are brought out?
I guess it is permanent in a way that it won't be removed after you reflash you device. But it can be altered right? (Because there are updates brought out for HARD-SPL also
Click to expand...
Click to collapse
It means it cannot be replaced by a stock SPL. There is a flag in the Hard SPL to prevent it from being overwritten. You must use SSPL to change the SPL version - PS the relocker in the Hard SPL thread will revert you to Stock SPL if need be.
Dave
Mark, you forgot SD card Flashing - RHODIMG.ngh
Would you be able to add it when you get chance?
Dave
i flashed my first rom yesterday but didnt remove my sim or SD card
everything seems ok , can it cause problems?
DaveShaw said:
Mark, you forgot SD card Flashing - RHODIMG.ngh
Would you be able to add it when you get chance?
Dave
Click to expand...
Click to collapse
Sorry Master
When I was writing the guide I didnt see anything about microSD Card flashing so I thought it best to leave it out. Plus I knew that you would pick up anything I left out
I will add it to the Rom and Radio flashing steps but I totally maxed out my post already. Any chance you can bung me another 5000 characters I promise I will pay you back next week Failing that I will have to do some drastic rewording or spread the guide over the first 2 posts
combat goofwing said:
i flashed my first rom yesterday but didnt remove my sim or SD card
everything seems ok , can it cause problems?
Click to expand...
Click to collapse
microSD Card removal is recommended just in case any self booting programs or UC setup files are on there that might interupt or conflict with the setup procedure after flashing.
Sim Card removal is recommended because as soon as your phone reboots after flashing your phone will be live and if you get a call or text message during the initial setup it might interfere and ruin the setup.
If you flashed with both the cards in it should be fine as long as none of the above situations happened so I wouldnt worry about it too much. Just be aware for future flashes