Ok... I have set my backlight to 1 minute time out NUMEROUS times, but it keeps resetting itself back to 10 seconds after some time (i'm not sure how long). This is driving me crazy! Especially when I'm trying to read something. What can I do? ANY help is beyond appreciated!
p.s. It began after I installed the new windows 6.1 update.
I am having the same problem and it is also driving me crazy!!
Someone please help!
Thanks
Me to
..just yesterday the phone kept trying to dim at 10 seconds but S2u2 wouldn't allow it so it would come back on..and it kept doing that crap every 10 seconds!!! I can't stop that setting from reverting back to 10 seconds!!!
Seeeeee? Somebody has to be able to figure this out.
same issue
i got the same problem too. i got the oem rom with wm6.1 on it. i installed s2u and manila 2d and pocket tool man. tried all the settings i could find from those programs. but the backlight keeps resetting back to 10sec after a while
any help would be good!
Possible Fix when Backlight Patch doesn't work
Like many others, I have applied the Backlight patch and experienced NO improvement after the Tilt is turned off and on.
I have loaded PHM's RegEdit and had a look at other registry settings and found a solution that works on my Tilt.
Under HKEY_CURRENT_USER / ControlPanel / Backlight you will find a key called "LockLevel", my value for this key was initially 1. I changed it to 0, and since then, whatever setting I use for the backlight timeout stays put even after numerous power cycles and days of use.
Would someone else who is familiar and comfortable with RegEdit try this and confirm this so we can verify it is not just isolated on my Tilt?
dazimmermann said:
Like many others, I have applied the Backlight patch and experienced NO improvement after the Tilt is turned off and on.
I have loaded PHM's RegEdit and had a look at other registry settings and found a solution that works on my Tilt.
Under HKEY_CURRENT_USER / ControlPanel / Backlight you will find a key called "LockLevel", my value for this key was initially 1. I changed it to 0, and since then, whatever setting I use for the backlight timeout stays put even after numerous power cycles and days of use.
Would someone else who is familiar and comfortable with RegEdit try this and confirm this so we can verify it is not just isolated on my Tilt?
Click to expand...
Click to collapse
I am using the same PHM's , and my value is set at "0" already....
yes, Mine is also set at 0.
I cant believe that HTC would release a patch that doesnt work!
Anyone else had luck?
Setting it from 0 to 1
"Un-dims" your backlight. Setting it from 1 to 0 makes it bright thats all I could figure out
It's a known problem with the 6.1 ROMS, although not everyone experiences it. Even the stock AT&T ROM had it. An official fix for it was released not long ago. It's available for download here: http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
It doesn't wipe your phone, so it's safe to do without having to set everything back up.
backlight works, but scroll wheel does not
jcreemer said:
It's a known problem with the 6.1 ROMS, although not everyone experiences it. Even the stock AT&T ROM had it. An official fix for it was released not long ago. It's available for download here: http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=1&dl_id=269
It doesn't wipe your phone, so it's safe to do without having to set everything back up.
Click to expand...
Click to collapse
This worked fine and fixed the backlight issue on my stock AT&T Tilt ROM, but it seems to have screwed up my scroll wheel function. Now my scroll wheel only turns up/down the phone volume. I can't seem to get it to do anything else in any other program.
bumblefreak said:
This worked fine and fixed the backlight issue on my stock AT&T Tilt ROM, but it seems to have screwed up my scroll wheel function. Now my scroll wheel only turns up/down the phone volume. I can't seem to get it to do anything else in any other program.
Click to expand...
Click to collapse
I haven't experienced that problem. What ROM are you using?
Finally!
Click Here for the .cab that fixed my unit. I got it off the ATT forum.
NOTE to all... Even this fix did not solve my problem until I checked the boxes to time the backlight. I like the backlight feature on all the time. If I don't want to see the screen, I turn it off.
I Had The Same Problem Too, But Then I Realized That Whenever I Disabled The Password Option In Settings It Went Back To Normal And Stayed At Whatever Timing I Set It To. The Only Thing About It Is That I Cant Use The Password Option In Settings. Unless I Was To Disable It Everytime I Used The Phone For More Than A Few Minutes At A Time...
I Have The At And T Tilt With The Shipped Wm6.1 Rom.
this will help
with your backlight problem
It helped me and then-some
I've tried all suggestions (except registry edits) and nothing works for mine! I like to keep my display on for GPS functions, but mine dims whether it's on battery or external power. The link for the cab in the AT&T forum no longer works, so I don't know whether that was similar to the HTC fix (which also doesn't work for me).
Since I have yet to try this, what program should I use to edit my registry? I've never done it, so I don't know what I need to do it. I also noticed someone posted these registry changes in the AT&T forum:
- change HKCU\ControlPanel\Backlight\ACTimeoutTemp value to your desired AC timeout in seconds. I set mine to 120 (2 min).
- change HKCU\ControlPanel\Backlight\BatteryTimeoutTemp value to your desired Battery timeout in seconds. I set mine to 60 (1 min).
- change HKCU\ControlPanel\Backlight\Locklevel\Locklevel to 0xFFFFFFFFF (this may also be just FFFFFFFF is your reg editor allows direct hex entries).
Note: With this change, if you wish to change your dimming timeout, you'll have to go back into the registry and update the settings.
Does this look like it would work? This is driving me absolutely nuts and I am this close to reverting to 6.0, even though my device was shipped with 6.1.
Thanks for the help, everyone.
EDIT: Since my search for this answer brought up too many different variables, I'd wanted to pose the question here, as it pertains to this issue... Will upgrading to a 6.5 ROM solve this backlight issue more simply?
Related
Is there a way to stop WM6 from going to Today screen when I turn it on? I want it to just return wherever I was when I turned it off. Thanks.
I believe it only happens if you have the PIN setup, at least on my Tilt.
Nope, it happens all the time. I'm in messaging, I turn the screen off and then on and it returns to the today screen. It is incredibly annoying.
Mine does not do that.
Must be a setting somewhere because I know other people have the exact same problem.
I also own the tilt and have the same problem. It's very annoying.
It is a setting issue..
On my Tilt this works: To stop the screen from returning to the Today screen, just go to settings > Personal >Today > Items and choose the Today timeout period from the drop down list.
No dice for me. It was one of the first things I tried before anyway. Its especially annoying when I'm using PocketPlayer and I turn off the screen to save juice and when I turn it back on again PocketPlayer flickers for an instant, then it goes back to the Today screen then I have to retap PocketPlayer, then it has to redraw. Ugh!!!
Yeah,i have this same problem with my TyTn...but it does not happen on a fresh ROM...which leads me to say that it has to be a program installed that is causing it...i have a Kaiser (that is awaiting warranty replacement) on the stock ATT ROM, and it does not do it, considering, i have no apps installed...
pocketplayer has an option to stop this: disable switching to home screen
Even in PocketPlayer toggling that option has no effect on my problem. I am convinced it is a simple registry setting but I don't know what it is.
Anyone have a solution to this?
Just got a Kaiser and I agree, this is extremely annoying. I was hoping there was a registry hack to stop this.
TSoma said:
Anyone have a solution to this?
Click to expand...
Click to collapse
Sure you can
Start->Settings->Today->Items->Today Timeout (Diable it).
This determaine after how much time it will display the today.
Disable it.
Enjoy,
Nadavi
Nadavi said:
Sure you can
Start->Settings->Today->Items->Today Timeout (Diable it).
This determaine after how much time it will display the today.
Disable it.
Click to expand...
Click to collapse
Nope. Checking or unchecking seems to have no effect. Even when checked, turning the device off and on will immediately show the today screen, not in the 4 hrs (or whatever you have it set for) in the dialog box.
Have you tried removing the PIN Lock feature under Settings>Lock?
Aha! the pinlock was set to 0 minutes for some reason. disabling it has sorted the problem for me.
Uberlad
Happy to Help
Mine is set to 60 minutes. If that truly is the fix, it isn't an acceptable one. Thanks for the info, but HTC should fix this.
its definitely not the fix. Mine was set to 15min and that's what I want it at in case I lose it. I am 99% sure its a registry setting and I am also 99% sure that I saw the fix in some forum on another site once but can't remember where or find it again.
Hi I am running Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2 ROM.
And everytime I get an incomming text message or e-mail the backlight comes on.
This happens even after you put it into standby and none of the other buttons will wake it only the power button.
i think that is by default and if u want the phone to wake by pressing any key than u have to make that change under settings.
It should not do that, the last ROM I used did not have that issue. It may not be the ROM I would like to know if anyone else has this problem.
Hi everyone..is there really no way to disable the screen turning on when a text or e-mail comes in. When using a WM6.1 ROM, I have tried different ROMs and they all the doing the same. It seems this should be something that can be configured.
Any input from the experts...if not I will go back to WM 6.0
I didn't have it happen with L26 v4 ROM - it does with Dutty's and it does with Death v3. I have heard from others in those threads who say that it does not happen to them. Some have said that the BBCONNECT program 4.0.0.92 is the solution - I have not bothered to search for or try yet. For me , right now, the common thread seems to be AT&T based ROMs
Arghhhhh....I hate to step back into the dark ages but that issue really bugs me. Knowing that my phone is in my case and everytime and e-mail comes in the screen turns on for 10sec....that accounts for the my short battery life.....And I only want to run the ROM's from Dutty he does really great work....wish I knew half of what he does. I might be able to fix it myself...That then brings the question why certain ROM's an not others...
I will leave that question to the experts.
I think it does this because it is putting an alert notification on the screen... I disabled those on mine and they still seem to come on the screen!!
It's so annoying to have to deal with your emails and at the same time have to dismiss countless notifications!!!
Same annoying problem here.
WM 6.1, and every setting in 'sounds & notifications' fails to show results.
Whether I disable or enable the tone, the showing of a message, or the vibration.. no dice: it keeps waking up from standby mode.
i remember some else asking this question as welll... and i think someone was talking about changing something in the the registry, but i am also interested in this. it would come in handy when i have to put my phone in standby for a long time.
bump
I too have this same issue. I've had my new ROM for several months and love it, but I would like to know how to stop the backlight from turning on everytime an email is received.
It never used to do this, however I am pretty sure the backlight always came on for new text messages.
I can deal with the text messages. However, I run blackberry connect for my work email. Having the backlight come on for each email obviously kills the battery life.
I know if can be disabled as it was before. The question is how? Is there a registry setting?
Every time I change something in one something in the other stops working. I can't seem to get both adjusted to gain the benefit of both. I have looked for conflicting settings in both to make sure there is nothing obvious. SU2U is worthless right now, it doesn't even lock the phone when the backlight turns off (which is why I loaded it). Anybody have similar issues or resolutions?
Thanks
Forgot to mention I have AT&T Tilt with OEM rom.
I believe the offending setting is in Kaiser Tweak under data. If I set "disconnect after" to anything other than disabled I experience problems. What happens to me is after an incoming call is answered using "slide to answer", the program fails to start normally again until I stop and start iLock or restart the phone.
Try AdvancedConfig instead of KaiserTweak. I have AdvancedConfig and S2U2 Working fine. Don't have this problem.
I've flashed my 8925 twice and hard reset it once, I've tried with and without having allowed the ATT customizations, and still there's a bunch of stupid little crap that is driving me nuts. Please note: these bugs are with no additional software installed.
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Missed calls / call log badly broken: I'll get the missed call notification but when I try to see the caller it shows the log as empty, and when I go into the log manually from the phone app it also shows empty--doesn't even have my outgoing calls.
Voicemail notification got stuck on. I can probably call ATT and have them fix this on their end in minutes but it's bloody annoying that my phone's been notifying me of a long deleted voicemail message for days.
Anybody else having any of these problems?
Anybody know a fix for any of them?
I've already tried advanced_configuration, no great help there.
What's the latest/best cooked ROM? I like that the official has stuff like Voice Command and Sprite Backup, would like to keep them...
I haven't noticed any of those problems. I have however had problems with the phone being really sluggish at times. Still testing with no apps installed. I don't have the backlight problem. I have just used the settings in Kaiser Tweak and everything is working. Not sure that I will keep using it though. I will probably go back to Hyperdragon's newest ROM's. Those always seem to work really well for me.
No issues with the official AT&T ROM either.
wmg76 said:
I have however had problems with the phone being really sluggish at times.
Click to expand...
Click to collapse
Are you using the right SPL?
I did not try the rom. But I heard cleartype w/ landscape problem still exist w/ this rom (like the official HTC 6.1 rom). It could be fix by replacing the ddi.dll but will probably break Opera mini 9.5.
Problems??? Pull up a chair! First I installed the ROM and none of my would work. I couldn't connect to the internet. I downloaded the ROM again and reflashed it. This time icons started disappearing on my phone. I did a soft reset. Nothing. Did a hard reset. Nothing. I reflashed. Loaded my apps, they actually worked. I set up my email, and I could connect to the internet. Great! Finally! One hour later, I got a phone call, but my phone didn't ring. Huh?Anyway, answered it, when the other party spoken it came out the speakerphone. I checked my device and there was no sound: ringtones,music games,alarms. Soft reset...Startup sound played..loaded up and no sound. Call ATT for a help, they decided to send me a replacement. Bad device, I guess. So I redownloaded the ROM and tried a different phone( i know, i know), can't get email to work, can't get MMetrics work. I quit!I will be going to custom ROM! I have a lot of reading to do.
Been using the new AT&T Rom since it was released and not having any issues. The only minor problem I have is that I'm seeing some compatibility issues with the version of S2U2 that I am using. Otherwise, good to go.
I don't get how people are having problems with this. Everything works flawlessly with me.
Except threaded messaging sucks, but with Kaiser Tweak, I turned it off.
I have had only 3 major issues with this rom.
1: Camera works, but doesn't show anything on the screen. I have a black screen, press the capture button, and I get a picture, but I can't tell what I am looking at until I take the picture. Working on this issue now. [Update] I just installed HTC Camera v5.04 b29195.00 http://rapidshare.com/files/99227062/HTC_Camera_v5.04_b29195.00__PPC_.CAB . Works Perfect now!
2. Battery life was HORRID! After 10 minutes I was down to 90%, while it sat on the desk, screen off, nothing running. After switching from 1.65.21.18 to 1.65.21.14, life was peachy. 8 hours with normal usage and only down to 80%.
3. Blue Tooth drops erratically. I connected my bt headset to the phone, made a call, after 10 or 15 minutes, it dropped the headset. BT stayed turn on, but headset couldn't be found. Turned off headset, turned back on, magically found. Haven't figured out what is causing this, but am researching that as well. OK, So I got on HTC's website to see if there was an update. There is no update for BT for the Tilt WM6.1. However, there is a fix for TYTN II WM6.0. http://www.htc.com/europe/SupportDownload.aspx?p_id=13&cat=0&dl_id=60. I decided to try this fix, installed thinking I would get the whole "this program was built for a previous version" garbage, but I didn't get that. Anyway, I am going to try this tomorrow when I make my calls. I will update if I notice it fixes my issues.
Otherwise, it's fast, good signal, good sound quality, etc. Overall I am pretty happy. Will be happier when I finally get the BT to stop dropping, as I travel a lot and it's illegal to talk on the phone w/o a hands free on any military installation.... Sorry if I didn't answer any problems others are having on this actual forum, but maybe someone else will be having the same issue and see my posts for my fixes. Thanks!
zip, zero, nada.......UI is faster, apps are faster, threaded SMS is really nice to have, MSVC works as advertised with my JB2.
Different Alarm Sounds!!
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
eltrebor said:
I have a small WAV file that I use as an alarm sound but now can't get the sound listing in the alarm setup. I use to put it in application data/sounds. It now doesn't show up if I put it there or anywhere else (/windows, /my documents/my ringtones). Anyone else have this problem?
Click to expand...
Click to collapse
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
I upgraded as soon as it was available and am seriously considering going back to the old WM6.0 ROM, which worked well. I have had several lockups and had to soft-reset. I have also had problems with calls. Once, it rang and shoed me the call, but wouldn't let me pick it up. Other times I have had echos. GPS lock time is also much longer. Oh, yes, the equalizer in TCPMP creates terrible distortion. It worked great in 6.0. And I am using the recompiled version.
It is great to get results of satisfaction with the new ROM, but I personally would like to know, for those who have been having problems and those, answers to some questions:
1 Which SPL
2 Which radio
3 Activesync or POP for email
4 Bloatware installed or not
5 PIE or other browser
I am sure that there are others, but those are what come to mind for the moment.
No Problems Here
FWIW, I think my Tilt is running much better with the new ROM. I've only had it (the new ROM) for a couple of days, but TT7 and Google Maps seem to run faster, and It seems to detect WIFI networks MUCH faster than with the old ROM. I'm a happy camper, at least for now.
I've noticed that its been alot slower and I don't like having a button devoted to the ringtone volume. The other HTC Tab I was using that was supposed to be an official use had Music allowing me to access Windows Media very easily now I can't. I also noticed my dialing pad is different and not the same as it was. I also don't like the threaded SMS on Windows Mobile it doesn't suit it. It makes it look very confusing and also I've noticed it has problems moving the screen upwards so that I can see what is being written in the space. Another thing I notice is randomly the HTC Home screen cuts itself off cutting off portions of the tab information. Its something to get used to but I don't see it happening cause I can't figure out what happened to some items on the phone like my GPS doesn't work, I am experiencing worse internet problems than before, Wifi dies frequently, and the dialer doesn't seem to work like it used to. Its a disappointment.
NotATreoFan said:
All my WAV and MIDI files in the root of Windows show up fine. How small is the file? 600kb is the size limit for sounds on AT&T ROMs unless you modify the registry key that restricts it. 600k may be large for an mp3 file, but that's only mere seconds of a WAV file.
Click to expand...
Click to collapse
Which key? I have been hunting... and no luck so far.
Backlight timeout linked to lock??
When I re-downloaded the software and re-flashed a *third* time things seemed to work better. The only thing I did differently was skip the 'setup a password' that last time I flashed.
The phone worked pretty well all weekend, and then this morning I finally put in owner info and set a pin password.
And I just noticed the backlight has started dimming after 10 seconds (or less) again. Restart didn't correct it, nor did changing the setting in advanced config so the screen doesn't dim for unlock screen.
For now I turned off lock and went into the backlight tab and it's stopped doing it. BLOODY ANNOYING. I've seen mention of the backlight timeout bug in other forums too...
Even while the phone was working well over the weekend I noticed that fairly often the first attempt to bring it out of standby flashes the screen on then it goes back off, comes on and stays on when I press power the second time.
I ran into the idiotic bug where text is white on white when in landscape mode, know I saw something about that being a cleartype bug or something and there being a fix, but why the hell would it be released like that?
Also, I can NOT get the 'message sent' notification to disable... does 'advanced config' not actually work?
Buggy is an understatement!
Having been unable to bear/ignore the bugs I reverted back to 6.0
Here's what I along with you guys have issues with.
1)Ringtones revert back to it's default tone whenever I open: Settings>Phone
2) Back-light reverts back to 10 seconds at random and often.
3) Google maps will not display letters when searching for places, but it'll invisibly type
4) Typical freezes on pages and things of that nature
5) Bloatware..
SeekerJBP said:
Which key? I have been hunting... and no luck so far.
Click to expand...
Click to collapse
I'll help you out here
Go into HKEY_CurrentUser --> ControlPanel --> Sounds --> FileSizeLimit ( it's a DWORD value)
Just delete the DWORD value, and bam, enjoy .
EDIT : wow, just realized this is my first post. I've been browsing the site since the Tilt came out, but I guess I've never found it necessary to post. haha!
TheCritic said:
Can't keep the backlight from timing out. I've always disliked the default of having the screen auto dim: if the screen is on I'm probably *looking* at it, otherwise I'd have turned it off... I've tried everything, setting no backlight time out, leaving it checked but matched to the screen shutoff, it shows the right thing in the control panel and stays on after I leave that screen, but usually within minutes or especially after I've used the phone it'll start dimming at 10 seconds again--even though turn off backlight is still unchecked in the backlight control panel.
Click to expand...
Click to collapse
I have the exact same problem with my 8925. My work buddy across the hall does not have this problem with his 8925. Running WM6.0 my screen has ALWAYS dimmed at boot, as well as after a call ended; his has never done so. Now, after we've both upgraded to WM6.1, I have all my same problems, as well as the additional 10 second auto dimming that I did not encounter with WM6.0, he still has none.
No matter what settings I change, no matter if connected to power, USB, or none, my screen dims after 10 seconds. I can get it to temporarily revert back to the setting of my choice, by going into the settings and then back out, but if I manually dim the phone, get a call, or pretty much anything, it defaults back to the automatic 10 second dimming. I'm so pissed off about this. S2U2 also automatically kicks in on every screen dim, so I can't use it while the dim prob is going on. Certainly someone within this HUGE base of geniuses has a definitive answer for this.
Lots of little bugs in this release.
Google maps doesn't like it.
Can't get TCPMP to work.
Gets sluggish.
MSVC doesn't notify.
Other things I can't think of now.
Pretty irritating to say the least.
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
Click to expand...
Click to collapse
Mine locks up when Gyrator2 tries to rotate the screen on incoming calls. Really annoying. I want to be able to rotate my screen in most programs, but it always seems to screw up my incoming calls and creates more lag...I'm gonna try to go back to sensorlock instead of pocketshield...
I will try to post it to the official forum as well.
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
i get odd issues as well
I agree, I get odd issues as well. I get the occassional hang, crash, missing bar etc. I uninstall pocketshield and I don't get issues. I'm using NATF 2.3 rom. I paid for it and it worked ok for a while until I noticed these intermittent problems...
wmserver said:
I had to same problem. I had Gyrator2 running which rotated the screen and screwed up Pocketshield screen.
I put an Event in Gyrator2 to disable rotation when in PShield screen.
The Event should be the same as Manila's except application/window title is "PShield"
That fix the problem.
Click to expand...
Click to collapse
I created a rule in Gyrator almost immediately after installing PS - I didn't want it to rotate the PS screen.
I left it up to Gyrator to get the window name and now my rule is set for the window #NETCF_AGL_BASE_.
But my problem is not in rotating, my problem is in unlocking (at least I think so). Anyway, will try to change the window name to PShield and see if it makes any difference.
EDIT
Nope it didn't. The top bar disappeared again during the first seconds of my testing :-(
ferus said:
Hi,
does anybody here use PocketShield?
I experience a strange problem - time to time when I unlock my phone the whole top bar disappears. The Start button, the Close button...everything.
I can't do anything with the phone - the only solution seems to be to navigate to the programs tab (via TF3D), select All programs and run the Lock - this locks the phone again and when I unlock it then suddenly my top bar is back. It seems to be completely random.
I know that there is a forum on the developers site but I was wondering if any of the bright minds here could help me ;-)
I am running the 2.0.6.2 free version.
I will try to post it to the official forum as well.
Cheers.
Click to expand...
Click to collapse
An updated version has now been released (9th Dec) to fix this problem...
rmjjjt said:
An updated version has now been released (9th Dec) to fix this problem...
Click to expand...
Click to collapse
Thank you my friend for letting me know. If this is indeed fixed I don't mind paying the $13. Will check it right now.
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Im using PocketShield, but I was wondering - the phone always locks after I insert the stylus (I have Touch HD), after a while PocketShield kicks in and after that if I want to unlock the device, I first have to unlock the "normal" lock and then the PocketShield. Really annying.
Is there a way to disable the lock after stylus insertion?
chetlet said:
New version available today - but it's not working correctly. after I use the slide bars one time to ignore a call, every call after that is missing the slide bar (answer and ignore soft buttons are there though) and when caller hangs up before I take any action PS just sits there, like it's stuck. Sounds like the same problems you describe earlier.
Click to expand...
Click to collapse
actually i just experience this an hour ago.. also every time I slide the keyboard to unlock my Fuze the screen freezes on the landscape mode. all keys on the keyboard besides the windows key. I hope they fix these bugs right away..
I have the same problem with the top bar disappearing. I'm not running Gyrator or anything like that. I'll try a new version when the bugs mentioned have been ironed out. It is a great product though. I do like it.
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
cheez said:
Are any of these being posted in the PocketSheild forum? They need to know the bugs.
Click to expand...
Click to collapse
yes many people posted on the pocketshield forums with same issues...
i dont know if anyone else is having this issue... but
i seems that when slide to answer is activated PSPP some calls get answered automatically... and it takes me to the "talking" screen immediately.
any help on this issue would be super!
I'm having other issues with PocketShield. I didn't have this same problem with version 2.0.6.3, but with version 2.1 I started to have problems with my alarm notification. When the alarm goes off, it just quickly vibrates once and just stops if it's in a locked state. Also, I noticed a heavy battery drain issue--the battery charge would drop about 10% each hour. Once I uninstalled it, the problems with the alarm and battery drain stopped.
Even with the new version (2.1.0.1) I still have problems answering phone calls. I'll slide to answer and the phone just keeps ringing. I hit the "Send" key and nothing happens. I hit the "Answer" soft key and still nothing....
Anyone else still see these problems?
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Major Problems
Well I was gonna pay for it but their payment server seems to be phishing site. Also it crashed SQB and when I uninstalled it, the program removed my outlook email account. Sorry but looks like malicious program so going back to an old sensor lock. I did like the software interface but Paypal confirmed me, so I shouldn't need to give you my personal information to pay for the software. No shipping means I am not giving you my phone number and address, etc. Sorry too many questionable things going on for a screen lock... rule is KISS and since this programmer isn't doing that then dump it off my device is my rule.
Neo_ said:
I have a different issue, when phone is not locked and I have an incoming phone call, pocket shield kicks in and shows me "lock screen" where I have to slide to unlock the device and only then I get the standard "Incoming call" screen...
v2.1.0.1
Click to expand...
Click to collapse
version 2.1.0.4 is out and is supposed to fix that problem..
I ran the site and its fine why do you say its a phishing site?