Hey Guys,
sorry, I´m searching the whole time after how to flash just an spl, for an extracting I used the NBH util.
My plan:
1) I want to flash my O2 branded Diamond, without flashing a hardSPL.
2) As I understood, it´s possible just to extract an SPL from the newest HTC rom, and flashing this with DiamondCustomRUU in the first step.
3) After this I should have the possibility to flash a full HTC Rom?
Are there any misunderstandings? because I can´t flash the extracted SPL with DiamondCustomRUU.exe.
What did I wrong, and what should I do?
Cheers, Chris
No one any idea???????????????????????
it might be possible to do this!
but you have to be careful not to get device ID/version different on both the OS or the SPL!
but why not just put hard spl and then revert back to stock SPL when you want to at a later stage! all versions of the stock SPL are availble on the rom developement forum
Related
Hello,
i flashed my trinity with "AX3L_WM6_WWE_v3.0.7" rom, and then I flashed by my own backup rom from Orange Slovakia, but SPL in bootloader is still "SPL-9.99.CP", how i can change it to my original "SPL-1.07.0000 " for warranty?
Can I again cook my own rom version, but in rom cooker i add some spl nb file with proper version? Where i can find this file?
Thanks all for information
to flash back, you will need to extract the spl from the official rom upgrade from your phone using nbh tools or something...
you could reflash the official rom upgrade without manually entering bootloader, also... crash proof spl doesn't protect itself against being overwritten..
There are no instructions on uninstalling hard spl on xperia anyway. All the ROMs I've tried seem to have some sort of glitch.
How do I revert back to my original ROM?
no need to revert Hard SPL to stock SPL just to get a stock ROM:
you can flash any stock ROM with Hard-SPL too
but it you badly need the stock SPL back, just flash it
Check the sticky threads, stock SPL is on the Hard-SPL thread, and there's even a video tutorial !!!
Easy... download stock spl which is found in hard spl topic... obviously you skimmed the topic instead of reading it.
Then, click on hard spl exe, now drag the stock spl's .nbh file into the hard spl folder. This will ask you to replace the .nbh file. Click yes, now flash your SPL.
When it finishes flashing into stock spl, reset the phone. Done.
Thanks Guys. I figured it out. Not gonna be flashing for a while.
Hello!
I'm new to the ROM upgrading buisness, just got my new ENERGY ROM installed!
I used the HSPL method, now i was wondering if my phone's preformance will be better with an HTC SPL compatible with my ROM
if so how can i change it and where will i find that SPL?
Thank you in Advance,
Roman
goldenwallet said:
Hello!
I'm new to the ROM upgrading buisness, just got my new ENERGY ROM installed!
I used the HSPL method, now i was wondering if my phone's preformance will be better with an HTC SPL compatible with my ROM
if so how can i change it and where will i find that SPL?
Thank you in Advance,
Roman
Click to expand...
Click to collapse
Please do not start new threads for questions that are best treated in the threads specifically dealing with flashing. There are specific threads for HSPL, USPL and a Tutorial discussing and explaining both.
An official spl will not work (unless it is 1.54.0000) but you will still need to use USPL in that case to keep the spl. That being said however, AFAIK the spl will not have any performance related enhancements to the device unless of course you have the wrong one, in which case the performance will be negatively affected.
You have the choice of either using HSPL or USPL for flashing new roms. As you have chosen HSPL this permanently replaces the standard spl (it can be reversed though).
With USPL, the way I understand it (have not tried it myself as I use HSPL), you first upgrade to an official spl - 1.54.0000, and then using UPSL this allows you to "crack" the standard spl to flash a new rom and each time you flash you need to repeat the process.
The difference between USPL and HSPL:
* HSPL is an user-modified SPL that you have to flash to your phone. It overwrites the existing SPL on your device with a "hacked" one so to say. It allows you to bypass the HTC certificate check and flash unsigned or CID-mismatching roms to your phone. You only have to flash it once and then you can flash roms anytime.
* USPL is a temporary solution. It takes advantage of an exploit in the existing SPL and then loads a modified one to memory, effectively allowing the same thing as HSPL. However, since this is only memory-resident you have to do it each time you want to flash unsigned or CID-mismatching roms to your phone, because this exploited state is lost upon reboot. With USPL you must still have the right version of the HTC SPL that is compatible with the rom you want to use.
Click to expand...
Click to collapse
A few questions:
my diamond (mda compact iv) is hard resetting everytime i soft reset after installing the gen.y r5.5 sense 2.1 rom. i have hardspl 1.4.
i've spent all day today ****ing around with the phone. i think my next step is to try flashing an official phone, hard reset, then reflash a different rom, then hard reset again.
1: since it was originally a t-mobile branded mda compact iv, do i need to find the original t-mobile rom or can i just flash any official htc 6.1 rom?
2: do i need return all the spl, radio to the original as well before i flash to an official rom?
thanks.
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
freakzone said:
Hi, since you have hard spl, you can flash any official diamond rom. You don't need to revert spl, or to change the radio. If the official rom has radio inside it will be flashed.
Click to expand...
Click to collapse
I have a problem with my Diamond, HTC USB Sync Drivers which i downloaded
wouldn't work, i can't extracted them. No archives found????
Hi and welcome to xda , what is the os on your pc. From what I remember the hotsync drivers were installed automatically. Try to download the rom again, maybe the RUU was toasted.
Hi,
I have a Dutch Touch Pro2 (unbranded) which I would like to return for warranty (some buttons on the keyboard aren't functioning properly) and I don't know much about SPL...
I've flashed the stock HTC Touch Pro2 ROM which I found at the HTC website. Now is my question:
Should I also flash back a stock SPL or is that included in the stock rom?
If not, where could I find it, and how should I flash it back?
Greetings,
Job
you have to flash "stock" hardspl back. I know as much as you about hardspl, sorry i couldn't be of more help :\
Yes, it does contain the SPL.
HardSPL by OliNex does contain a black, so the SPL doesn't get changed.
Hi Jackos,
I've flashed back Stock SPL 0.87... So when I now update my ROM, should it change the SPL then to the SPL included in that rom?
found it here by the way: http://forum.xda-developers.com/showthread.php?t=550131
Job
j0bb13 said:
Hi Jackos,
I've flashed back Stock SPL 0.87... So when I now update my ROM, should it change the SPL then to the SPL included in that rom?
found it here by the way: http://forum.xda-developers.com/showthread.php?t=550131
Job
Click to expand...
Click to collapse
yes it will.
awesome then my problem is solved!
Thanks.