Database Develop

upgrading xdaIII (qtek 9090 )with italian rom 14004_153_1120

HELP MY QTEK 9090 is totally struck when I eas upgrading I've tryed so many times BUT NOTHINGS HAPPENS!!! I'VE ALWAYS RED ERROR MESSAGE ADN ICAN'T GO BACK!!
CAN ANYBODY HELP ME PLEASE!!
THANKS
:twisted: :evil: :?: :?:

i have any problem like your, what error message you have? win ce image error or anyhink like this?? can you get to bootloader?

Topic moved to BA Upgrading etc.
Did you read this page
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade

no i can't!!!
no I can't the pda is completly dead ti gives me the writings
SERIAL
V2.07
AND NOTHING ELSE!!!
I follow the FAQ suggestions but nothings HAPPENS!!!
HELPME PLEASE!!!!
:evil: :evil: :evil:

1)Take it out off the cradle.
2)Take the battery off, and leave it off for about 20 minuts.
3)Make sure that the USB cable is connected directly to your PC, and not through a HUB.
4)Reboot PC, dont start any programs.
5)Put the battery back on you BA, switch it on and Cradle it
6)Follow instructions in WIKI

it work only in eglish version
Thaks Bosjo but works the english version rom only!!
I've discovered , anso I thank you so much, that exist one italian version only for my qtek 9090 the other one once I've tried it
doesen' t work AGAIN!!, I : was been found the same problem...
I'will follow your suggestions...
:evil: :evil: :?:
thanks
Alexj

[please follow bosjo suggestion if u have an english versio, but I need the italian one it's a big probelm for me to install it...damn...!! :twisted:

bosjo said:
3)Make sure that the USB cable is connected directly to your PC, and through a HUB.
Click to expand...
Click to collapse
****, i made a Typo, it should say
3) Make sure that the USB cable is connected directly to your PC, and NOT through a HUB.
It should work with all the roms. (those on the 1.40 link page)

ti's all ok over there
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:

BAD ROM UPDATE!!
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
I'M REALLY BEACAME NERVOUS..
Any suggestion bosjo??
Please I'm struck again.. :evil: :evil: :evil:

always stuck
Hi my friend after having succes to upgrade my 9090 in english, no way that italian programs, works I've tried to install italian cab files..but. nothings happens.
then I restarted from zero and that'it..
AND NOW : ERROR 102 THE ROM IMAGE FILE IS CORRUPT !!!
and now what should I do please?? The separated files in(verion in WWE) seems not to work !!!!
I'M REALLY BEACAMING NERVOUS..
:evil: :evil: :evil:

Re: ti's all ok over there
alexj10 said:
Yeah my fried my cradle is direcly connected to my usb port...
thanks :twisted: :evil:
Click to expand...
Click to collapse

Well I am lost now.
You say that you can flash a wwe rom, if so which one.
You say you cant flash the ITA 1.40 rom but you dont tell us how you are trying to flash it.
Best is always to start form the begining.
Get your shipped rom back on the device.
Upgrade the radio .....only
empty out the ext rom....
then falsh the CE...only
and if you need help tell us what you did as it would explain how you got the error message. We have no idea what you are doing thus cant help you much.

The program I've first tried named BA_DT_ITA_14004_153_1120.ship
doesent' work !! So Ive my 9090 completly dead, I've red almost all the instructions but now I really dont'know how to move myself, and I'dont remeber the previuos version because is cancelled.the attemp to update to 1.40; 1.40.153; 1.12.00 always fails
I've tryed many times to run the program above, but the error messge is the same : soft reset and restart....
so really do not be able to
Get your shipped rom back on the device.
empty out the ext rom....
then falsh the CE...only
can u hepl me please ??

Ok lets get a wwe 1.40 on your device. (as I am not sure if the ita is Broken)
Follow :
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
1) Take the IMate rom.
2) Download the rom and the MA file.
On device
1) On your device perform a Hard reset
2) Remove the battery
3) Wait 5 mins
4) Put battery in again
on PC
1) Reboot your PC after download
2) Make sure the cradel is connected to your PC with no hub.
3) Turn on device
4) Place it in cradel
Run the upgrade
chose the:
First Method (Quick/Easy) (TYPE II)
Post what happens

country error
thanks for the attempt but the message is country error ...
:evil:

country erroro
[
I've done but..
thanks but the message is :country error....
with the old method applicated at your concept the message is ROM error....and now what's up :?:

What exe are you runing : Name of that file!

file name
the file name is rom 1.13.00
but in th e italian vrsiona the name is ns and anothe rone is nk
Sorry but I'm not so expert mybe isould try the secon method downloading separate file s..??
thanks again.. :?:

There is no file name 1.13.00.exe !

Guide to update ROM

Good-morning to all xda members and many thanks to the people who dedicate a lot of their free time to update Himalaya to Mobile 6.
Im a newbie and i would like you to help me!
Can you reply to this thread by posting all the steps for updating my ppc (Qtek 2020 / wm5) (Steps and software that i need)
e.g 1. charge ppc
2. ActiveSync
3. soft .......
This will help a lot, im afraid that i may damage my ppc that i bought from another person with wm5.
Thanks In advance

also Id like to know if i need to back up old rom and how to do it (also the software)

it's in the zip file of most wm5 roms as a txt file
1. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
2. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
3. Run HimaUpgradeUt_noid.exe
4. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
5. Detach your device from the cradle.
6. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.

thank you
But is already installed with wm5, i follow the same steps for wm6?

Nojahoda said:
But is already installed with wm5, i follow the same steps for wm6?
Click to expand...
Click to collapse
it is exactly the same procedure

I cant wait to go back to my place and try it!
A big thank to utak3r

Nojahoda said:
thank you
But is already installed with wm5, i follow the same steps for wm6?
Click to expand...
Click to collapse
the same...........

For the current WM6 ROMs you also need to do a couple of things after that (I believe because they are still really testing ROMs).
From the c_shekhar ROM readme:
Once the device comes to life after hard reset for the first time, goto Settings-->Connections-->USB to PC and check the advance network functionality.
Click to expand...
Click to collapse
And from utak3r :
[HKEY_LOCAL_MACHINE\System\Events]
"SYSTEM/BatteryAPIsReady"="Battery Interface APIs"
Click to expand...
Click to collapse
(explanation/step by step here http://forum.xda-developers.com/sho...ighlight=SYSTEM/BatteryAPIsReady#post1484842).
Nick

Hi, at first i would like to thank all who dedicate their time and worked hard to update Himalaya to Mobile 6.
Sorry maybe it is a stupid question but do i have to upgrade to wm5 before I can upgrade to wm6? Actually wm3 is on the Hima.
Thank you all for your aswers.

mumbu said:
Hi, at first i would like to thank all who dedicate their time and worked hard to update Himalaya to Mobile 6.
Sorry maybe it is a stupid question but do i have to upgrade to wm5 before I can upgrade to wm6? Actually wm3 is on the Hima.
Thank you all for your aswers.
Click to expand...
Click to collapse
Nope - flashing a ROM erases everything from the previous ROM (except the radio stack and (I believe) the ramdisk) so it does not matter what you had before.
Nick

csudcy said:
Nope - flashing a ROM erases everything from the previous ROM (except the radio stack and (I believe) the ramdisk) so it does not matter what you had before.
Click to expand...
Click to collapse
Although flashing itself doesn't erase your ramdisk, but hard reseting your Hima does it so...
There're 3 things you can flash... OS (that's what you're most interested in), radio stack (separately) and Button... The latter you shouldn't even touch, if you don't want to brick your Hima

IIIIIIII did it. Thx for everything. I had o problem with activesync but i fixed it. Its realy cool. im trying BT pan and BT sync. Guys you are the best

Im new on PPC,i would like to ask i have a:
XDA II
Rom Version: 1.66.00.WWE
ROM Date:02/20/04
Radio Version:1.08.00
Protocol version: 1337.18
xtROM Version:1.66.165
Is it ok to do upgrade with atleast 36% on battery level? or i should make it to 100% battery level before i do update?

Why dont you charge it full and try it.
Better safe than sorry

sir im on a hurry i left my charger at home, so you mean it could cause an error? right now im updating im on 27% on progress. sir i would like to ask if this happen that it couldn't finish due to low power supply. what whould happen to my PPC? is it brick? how i can revive this if ever i brick?

Im a newbie. I have a pocket pc for 3 weeks now. All the installation took me about 30 minutes. i think you ll be fine. If this was easy for me that am a newbie imagine yourself

If you will run out of power, you will have to just start again, after charging it. The rule is - better have it at least 50%.

utak3r said:
If you will run out of power, you will have to just start again, after charging it. The rule is - better have it at least 50%.
Click to expand...
Click to collapse
Wow great help utak3r this answer help me getting to know more about PPC.
A million thanks

X-13 said:
XDA II
Rom Version: 1.66.00.WWE
ROM Date:02/20/04
Radio Version:1.08.00
Protocol version: 1337.18
xtROM Version:1.66.165
Click to expand...
Click to collapse
Hi this my original Device Info of my XDA II after i update with WM2k5
ROM Version:3.50pp16A2
ROM date; 02/13/07
Radio Version: 1.08.00
Protocol Version: 1337.18
ExtROM Version:
Why my extrom gone? how i could put it back or install a new one?
Im practising on this from WM2k3 to WM2k5 soon(after i mastering everything Hima) WM2k6.

X-13 said:
ROM Version:3.50pp16A2
Click to expand...
Click to collapse
Illbasha ROM? Good choice for wm2k5
X-13 said:
Why my extrom gone? how i could put it back or install a new one?
Click to expand...
Click to collapse
Well, extrom in wm5 is unused on Hima. If you don't plan returning to wm2k3, search the forum for reformatting your disk-on-chip (DOC) in order to join extrom with storage - thus getting storage as big, as 32MB
X-13 said:
after i mastering everything Hima
Click to expand...
Click to collapse
So.... you won't get it soon

Need Original WM6 ROM for i-mate KJAM

Helloo all helpers
I need a original imate WM6 ROM for i-mate KJAM (wizard) can any helper give me the link to download.
Thanks in advance

a 6.5 rom for i-mate k-jam needed!!
hi everyone,
everytime i try to flash a 6.5 rom to my k-jam it freezes on the (red green blue) screen..
and in the RUU it says check your USB cable more like a connection problem but i tried 3 cables all with the same problem..
i thought it might be the wrong ROM but i really dont know..
any help will be appreciated
BIG SHF

BIG SHF said:
hi everyone,
everytime i try to flash a 6.5 rom to my k-jam it freezes on the (red green blue) screen..
and in the RUU it says check your USB cable more like a connection problem but i tried 3 cables all with the same problem..
i thought it might be the wrong ROM but i really dont know..
any help will be appreciated
BIG SHF
Click to expand...
Click to collapse
Did you superCID or HardSPL before you tried to flash?

I think to i dead my blueangel Qtek 9090

Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(

now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...

ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony

thanks now everythink is write ..

now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.

for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question

tony i need your help

Mteor Slow not start after flash

Hello,
I have problem with Mteor, I flash ROM RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3 to Mteor but he is extremly slow 10 minutes to start and can't use. So problem is, that I can't flash any other ROM. I take Mteor to service center but they say me that problem is mainboard, but I thing this is not true...
IPL 0.90
SPL 1.10
can anyone help me?
thank you!

st.tom said:
Hello,
I have problem with Mteor, I flash ROM RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3 to Mteor but he is extremly slow 10 minutes to start and can't use. So problem is, that I can't flash any other ROM. I take Mteor to service center but they say me that problem is mainboard, but I thing this is not true...
IPL 0.90
SPL 1.10
can anyone help me?
thank you!
Click to expand...
Click to collapse
you try to get into Bootloader mode attach the USB cable and flash the new ROM