Related
Hello all,
I've upgraded my Cingular 8125 device to the latest official ROM from Cingular/HTC. These are my current versions:
ROM Version: 2.25.11.1 WWE
ROM Date: 5/11/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM Version: 2.25.11.102
However, I've noticed that at least once or twice a day when I'm on a phone call, my call is suddenly dropped! I have to wait a few seconds before I'm able to make calls again. My guess is that there is something funky going on with the radio version that I'm using. Is there a later (more stable) radio ROM that I could upgrade to? Notice that I have my device configured quite well and I wouldn't want to wipe it out entirely again (as I already did to upgrade to the latest 2.25.11.1 Cingular-approved ROM). Is it possible to just upgrade the radio ROM without having to wipe my device again? If so, which radio ROM should I upgrade to, and where is it available?
Thanks!
Ryan
Ignore all I wrote, was a bit uninformed
sorry
Look for the 2.47.11 Radio Rom in the Wizad FTP section.
Molski
For the life of me, I can't find that ROM on the Wizard FTP site. Could you please post the path? Thanks!
_Nomad_ said:
I'm afraid that there isn't any way to upgrade to a later radio ROM for the wizard, there are a few later versions embedded in various ROMs available at the forum though there's always a minority of ppl that do experience call dropouts now and again with all of these, so upgrading doesn'y guaranty a solution . Best bet would in my opinion still be to hard reset your device and start from scratch... Best of luck
Click to expand...
Click to collapse
Excuse me but WTF are you talking about?
btw, the 2.47.11 is here
way to go Dr Puttingham
I sure do love it when people provide real links instead of "go check this/that".
I have a question also. I am getting my new TMobile MDA from a this seller on eBay
I want to know what I should do first? Do I need to CID unlock, Registry unlock. If so, how and in what order. I plan to use a T-Mobile SIM card so I probably don't need SIM unlock at least for now unless it is required to do some of the apparently needed OS and radio ROM modifications. I got the radio ROM you provided, so I assume I will need that.
trpenner said:
I sure do love it when people provide real links instead of "go check this/that".
I have a question also. I am getting my new TMobile MDA from a this seller on eBay
I want to know what I should do first? Do I need to CID unlock, Registry unlock. If so, how and in what order. I plan to use a T-Mobile SIM card so I probably don't need SIM unlock at least for now unless it is required to do some of the apparently needed OS and radio ROM modifications. I got the radio ROM you provided, so I assume I will need that.
Click to expand...
Click to collapse
From what I gather on here, you'll need to use a CID unlock, but only if you plan on putting an unbranded or custom ROM on your MDA...otherwise it will work find out of the box. Keep in mind that not having any restrictions (CID / Registry) is always preferred
rmlecompte said:
Hello all,
I've upgraded my Cingular 8125 device to the latest official ROM from Cingular/HTC. These are my current versions:
ROM Version: 2.25.11.1 WWE
ROM Date: 5/11/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM Version: 2.25.11.102
However, I've noticed that at least once or twice a day when I'm on a phone call, my call is suddenly dropped! I have to wait a few seconds before I'm able to make calls again. My guess is that there is something funky going on with the radio version that I'm using. Is there a later (more stable) radio ROM that I could upgrade to? Notice that I have my device configured quite well and I wouldn't want to wipe it out entirely again (as I already did to upgrade to the latest 2.25.11.1 Cingular-approved ROM). Is it possible to just upgrade the radio ROM without having to wipe my device again? If so, which radio ROM should I upgrade to, and where is it available?
Thanks!
Ryan
Click to expand...
Click to collapse
I have the exact same setup, with no customizations on my 8125 and am having a terrible time with calls dropping. Did you find the radio ROM upgrade and did it work?
Thanks.
its already been solved in another thread. apparently its the data connection trying to activate 4 min into a call and dropping the call. the fix is a reg change so that data knows to remain suspended.
http://forum.xda-developers.com/showpost.php?p=995659&postcount=272
How to?
Well I downloaded the radio ROM but I have no idea what to do next. I searched the site for how to install the update but came up empty.
Any information on how to install the new radio ROM would be appreciated.
As for the registry edit for data connection I am not sure that this is the solution as the calls drop at random intervals, not 4 minutes. I don't have anything (that I know of) which would be trying to create a data connection anyway.
For the registry edit I would need Total Commander correct? Is it really safe for a Noob like myself to make these changes? I can program a vcr but I once deleted part of my operating system in an attempt to get more disk space on my computer. Now I know better but not a lot better.
Thanks
Read this thread for info about Radio Rom Only Updaters...
http://forum.xda-developers.com/showthread.php?t=268031
Thank you. Looks like exactly what I need. There wasn't the 2.47.11 radio rom in the list there but I will go through those steps to reinstall the ROM that I have and see what I can learn.
I installed the 2.47.11 radio ROM and calls kept dropping. I called Cingular and they assured me it must be the device so they are sending out my 4th 8125. I complained and made a nuisance of myself so they are sending me a free 8525 in addition to the 8125 I have. in the meantime I went to the Cingular store for a loaner so I wouldn't be dropping calls all the time. Even the nokia loaner was dropping all the calls, switched to my unlocked nokia 6820, still drops. Must be the network and not the device.
Hi Guys,
thanks for the good job you'all are doing. Will appreciate whatever help i can get to resolve this issue with my phone. I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. Since then i have noticed that sometimes it seems my phone is dialing itself or a call is coming in. The funny part is though every other function is working i wont be able to answer this phone. It will seem to hang. Then after a while i will get the cprog.exe error. To be able to make phone calls i have to soft reset the phone. i have had to hard reset my phone twice already with no solution. Also googling has not been able to provide any answer too. I just sent an email to HTC Technical support now but with experience i doubt if i will get any useful response. So this is my last resort.
It is also pertinent to note here too that intermittently i do get the tmail.exe errors.
Hi,
I am having the same problem after the upgrade..frequently its becoming stoned! requiring restart many time during the day...which was not the case before...anybody has got any solution???
I love my TyTn II but not the 6.1 ..its not stable!
azuka said:
Hi Guys,
I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. ........ errors.
Click to expand...
Click to collapse
Azuka, who so ever upgraded to 6.1 from HTC experienced the same problem even i myself suffered the same. So your only solution is to downgrade to 6 but before doing that you must HardSPL your phone ...
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
NotATreoFan said:
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
Click to expand...
Click to collapse
Thanks for your reply. Your two words "Bad Flash" got me thinking. How could that be. I thought so too and had to re-download the file from htc website and re-installed.
About HardSPL'd your phone, from reading the wiki i now know what it is. But there is no instruction out there to HardSPL'd. Do i need to get the file and copy unto my phone or what?
thanks.
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
NotATreoFan said:
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
Click to expand...
Click to collapse
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
azuka said:
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
Click to expand...
Click to collapse
I have the freezing issues too. Two things has helped me reduce the frequency (and improve general responsiveness of the device):
1. I've disabled the HTC task manager application - that helps a lot on responsiveness
2. Each time I soft reset the phone, I manually kill the mstli.exe process - that helps a lot on the freezing issues.
regards,
Spip
Just to share some experiences
So I have the TyTN II and I recently upgraded to the official HTC WM6.1.
I have none of these problems of screen freezing, unstable rom, etc etc etc...
However, I do suffer from occasional program error message and asks me quite a few times to send the report to microsoft.
But this only happens when I load certain third party softwares and then close them down.
I attribute this to compatibility issues with WM6.1...maybe I'm wrong. But that's what I think anyway.
azuka said:
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Click to expand...
Click to collapse
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
I had this issue and it was just down to previous HardSPL being left at an early version (I think around 1.02) on the device and if you apply this latest HTC stock ROM update you get a bad flash and freezing especially in the threaded SMS app.
Install any HardSPL later than 3.00 then redo the ROM update and it should cure it.
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
NotATreoFan said:
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
Click to expand...
Click to collapse
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
if u need upgrade or downgrade then u r speaking about a need for hardspl
dkiersz said:
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
Click to expand...
Click to collapse
Just a quick update. After HardSPL-ing my phone it worked well for sometime then the tmail.exe error surfaced. I have only had the cprog.exe error - where a call comes in and i can not answer neither can i make another call until i soft reboot - has only happened once or twice. Apart from these the phone has been working well.
Anyway i just got a reply from my earlier mail to HTC and thought i should post if here for people's information. Apparently they are aware of these issues and working on them. Read for yourselves:
New Response From [ Maha Mamer (Qatar Support (Tech)) ]
Thank you for contacting HTC Corporation Middle East Support Dear Mr. Felix First of all we are very sorry for our late reply Please, if your problem still exist with this error message, you can try one of two options. 1- go to Start> Settings> System(tab)> error reporting> and disable the error reporting option. 2- If this did not solve your problem, then you might need to get back to WM6.0 until we finish our update for the new release of WM6.1 with the new modification for our web site. Please do not hesitate to contact us back for any inquires. Please note that you could also contact us by phone on our hot lines. http://www.htc.com/mea-en/CA_Hotline.aspx?region=MEA Sincerely, thank you for choosing HTC Corporation HTC Corporation Middle East Support Team http://www.htc.com/mea-en/default.aspx
Just an observation here:
After reading somewhere on these pages that the erratic behavior of TYTN II could be due to bluetooth adapter i decided to go some days without my Motorola S9 bluetooth ear piece i am yet to experience any of the issues i had before. Could the bluetooth software for WM 6.1 be the issue?
Momentary Freezing - Resolved?
azuka said:
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
Click to expand...
Click to collapse
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
wa4cbg said:
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Click to expand...
Click to collapse
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
How to Stop Momemtary Freezing
azuka said:
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
Click to expand...
Click to collapse
I am looking for a solution. Not using Blue tooth to use a device that costs over 600.00 just doesn't make sense to me.
Is there a ROM hardSPL combination that will give me freeze-free performance or is this an HTC problem that is not solvable. I just can't believe that every Kaiser user that has upgraded to wm 6.1 has the same issue that I have with momentary freezes that last up to 5 seconds.
Is the solution another ROM, another Hspl, another phone? Who can help me resolve this issue? Is there a better place to post this?
Thank you
Freezes and locks.
Prior to my upgrading my AT&T Tilt to WM6.1 which I did today. I was experiancing LONG freezes, listening to music or just waiting for menus. I could not determine any specific software that was the cause. I tend to install a lot. Did a hard reset, didn't install the AT&T bloat, reinstalled my primary apps MS Voice Command 1.6 (a Must). Still same issues... Occationally could NOT answer calls. Hit the green button, or the answer option on screen. the onscreen 'answer' would flash, but I could not use the phone until a soft reset. LONG process when you are waiting for a call back.
AT&T sent me a new phone which I got and installed the NEW wm 6.1 before anything. Worked pretty well, but I had not made any calls or recieved any all day. I did listen to several hours of music on my Motorola S9 headset and made sure Audible Player would work. Two apps I use daily.
All seems well, except NOW I get the cprog.exe error. I decided to test my phone with a simple incoming call. Before I ended it, it went dead. Not sure what the HardSPL is yet. Will look into that. Just thought I'd let others know that the lag, AT&T seemed to think was a hardware issue so they replaced my Tilt.
Software installed; MS Voice Command 1.6, Live Search, Audible Player, TCPMP, FlashBundle, GPSToday. Pretty much it besides the AT&T bloat that came with the ROM. Good luck
Lately I've been having trouble connecting thru wifi. I went to the wifi settings, under Network Adapter and when I select the wifi adapter I see that's set for server assigned IP, but in the field below this there's this weird numbers (fe80::218:41ff:fe2) instead of the IP.
Is anybody else having this problem?
I've been able to get rid of this by Hard resetting a couple of times, but it's a hassle having to re-install & configure everything.
I got my unit second-hand a couple of weeks ago, everything was fine till I changed the SPL from 1.0 Olipro to 3.28 Hard. Since then I've flashed 3.29 & 3.56 Hard, same problem, like I said before a Hard Reset fixes this for a while.
Today I flashed HTC rom 3.34.721.2 & radio 1.70.19.09 and all was fine. A while later I noticed the same weird "IP".
I've read in some threads here people reporting trouble or lossing their wifi, but I've never read of an answer or the reason for this identified.
So...anybody have an Idea?
It does display such a thing when on server assigned IP indeed, but it works just fine that way, wouldn't call it a "problem".
Is your ROM a WM6.1 one? If it's 6.0 as might be since you had HardSPL 1.0 and don't say you changed ROM, you should leave HardSPL 1.0. The 3.x versions are for WM6.1 only.
EDIT: I just read the line where you say you flashed another ROM and it works - that emphasizes my thought that your previous ROM was 6.0 and you flashing the not compatible 3.x SPLs broke WiFi connection and other things like the 3G display that didn't work. Now you flashed a 6.1 ROM and it's fine again as it's OK with the SPL you have now.
Actually my ROM was WM 6.1
If you'd read my signature you'd find that my old ROM (3.28.405.0 WWE) & my new ROM (3.34.721.2 WWE) are both WM 6.1. That's why I wanted to update my Hard SPL in the first place.
My wifi started acting up when I updated the Hard SPL. Now I flashed the latest HTC WM 6.1 ROM & I haven't had any more trouble with my wifi. (At least for now)
Thanks
I have the same problem tried re-flashing with new spl and new roms but no joy. It began while I was on stock rom from orange tried to flash to dutty xtreme 2.1 problem still there.
Now I have kept the custom rom and reflashed to spl 1.14 stock and problem is still there. My wifi seems permanantly messed up. In the IP box I have fe80::218:41ff:fec6
Please someone help.
Hello to all,
I have big problem with my BA GSM... I have done a lot of research but I can't solve my problem...
I have upgraded my BA (SPV M2000 ORANGE UK) from win 2003 SE to Win 6.1, Win 6.5 Win 5... But in all ROM versions I don't have a possibility to make or receive call... Phone is on automatic search for network and always founds my home network, but when I'm supposed to receive a call, network is going down (just loose it). When I want to make call same thing happens. When I switch to manual searching for network I get this message: "Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again"
I have tried to change radio ROM to every version you have on forum (right now I am on last 1.15), but still same problem.
When I was on the win 2003 SE, I have to use unlocker to make GSM working and that is working just fine... But when I upgrade to any other version of ROM or radio ROM, GSM doesn't function like it should...
Device information for my BA:
Operatior Version: wm 6.1 ppc Pho...
ROM version: Black Skin HT4...
ROM date: 08/08/08
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1337.45
ExtROM version: Black Kernel
Model no: PH20B
Many thanks in front for any idea
Try going back to the original ROM or reflashing you current one. I had a similar problem where my sim was not inserted completly and would keep dropping in and out.
Thanks for respond I already tried to change sim card, but same thing happened... I don't know where I can found the original ROM for my SPV M2000 orange UK to try to fix my GSM... Does anybody now where I can found the original ROM for my baby ?
Here are 2 places for the original ROMs, also with original radio ROM.
http://firmware.atspace.com/Blueangel.html
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Thank you for help, I restored phone to shipped ROM RUU_v2.5_OrangeUK_v5.40.1.179.ship and everything works fine... I have don't have any problems..
Is that mean that now I can't upgrade my windows to any other windows for my phone, or I should try again with some differed ROM...do you have any idea what is best ROM for my BA ?
Working Device information:
Operator version: 5.40.1.179
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.06.02
Protocol version: 1337.38
ExtROM version: 1.40.179 WWE
You should be able to upgrade to other ROMs, I am not to sure why you had the problem with so many different ROMs. I use xplode's R7.1 WM6.5 ROM, but there are other to use. swampy395 also has a pretty good 6.5 ROM.
http://forum.xda-developers.com/showthread.php?t=482997
also make sure to remove the sd card AND the sim card from the device before upgrading and have the battery charged 100%, that should do the trick
please delete
Unfortunately its impossible to change ROM...I tried every Xplode ROM from ver 5 to 6.5, and also I tried swampy395 ROM... Always the same problem remains - GSM drop after I try to call or receive phone call, and after that, no SERVICE at all... I switched to every radio ROM from 1.00.00 - 1.15
I think I'm doing everything ok:
1) removed SIM card & memory card and confirmed that battery is 100% full
2) Entered bootloader and start MaUpgradeUt_noID
3) After upgrade is finished, I have done hard reset and entered in boot menu then do NO YES YES
4) After system is normally booted, I inserted SIM card, switched phone ON and reset it after that, because radio ROM need to boot also
And that's the way I have done upgrade
wow, that's a tough one.
question: i saw, the shipped rom you used, was orange uk, is your phone actually a british orange branded one, or was that just a test shipped rom?
have you ever, in wm2003 or wm6 tried running xda unlock? http://forum.xda-developers.com/showthread.php?t=240784 to get a sim unlock or just for fun?
and let me just throw one more thing in the discussion, the newer roms seem to support newer sim cards that wouldn't have worked with wm2003, maybe that is true the other way around as well, maybe your sim card is too old to work in "your new phone". happened to me once with another phone. contacted my operator and they sent me a new sim card, with the same number. a copy of my old card, just on the new ones.
have you ever tried it with another sim card?
wow, that was all i can come up with, your problem is really complicated and you already tried so much yourself, there is hardly anything to suggest anymore
Chef Tony my friend,
I have to unlock my phone when I receive it from UK (ORANGE UK is phone for sure) I do unlock with xdadev_all_unlock-v1.6_138.exe and its successful. I do unlock again for many times with new ROMs but nothing happened. I also try 4 different SIM card and there is no change... I will contact my network operator to see what they think...
Many thanks for helping me
Hi there. Have you solved this problem?
Best regards
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
Hi i have the same problem i changed the rom and the radio but i can get signal
NO SERVICe thats all that it says please help
the problem started from no where i never tryed to change anything in my phone before
And after i upgrade the rom my youtube player doenst work!
please make sure, you tested all the things suggested before. plus after posting three posts in a row, i would have expected a little more information, like rom version, country, carrier, radio version and so on. there is nothing new to say, if we have to guess everything.
about youtube, well, that depends on what rom you are using, you might even be able to just go on the site in your browser, of if you want a faster and more reliable solution, try -=this=-
Im still on wm2003... there is no solution for me
Hi I'm new around here. Thanks to the NOOB install guide I could install a great rom from this site. It worked great... untill I made a call. I called someone and after the call I couldn't call anyone untill I soft reseted the phone. I tried to install another rom for the kaiser and I even tried the wm 6.5 rom. They all work but after 1 call the call function cuts working. Is this an common problem?
Could someone help me
you're obviously new here, so welcome!
somehow, i think you're under the impression that we are mind readers
did you search here on the forum? did you read the wiki? which particular flashing guide for noobs did you follow? which ROMs EXACTLY did you try?
what i mean to say is BE PARTICULAR and DETAILED in your posts...and this is a NECESSITY if you are starting a new thread...which really doesn't seem appropriate (yet) because your issue SEEMS to be caused by an unmatched radio version and/or SPL version...BOTH SPL version and radio version must be versions that are meant for windows mobile 6.1/6.5 if you tried 6.1/6.5 ROMs. i have a feeling your SPL is one meant for windows mobile 6.0...another possibility is that the ROMs you tried DID NOT come with a radio (some ROMs do, some ROMs don't) and so your radio version might also be one meant for windows mobile 6.0.
please read the wiki to find out how to determine your radio version and your SPL version...then post back here
you might want to re-read the noob flashing guide also
and to reiterate, always be detailed and always SEARCH thoroughly
good luck
same problem
I have exacly the same problem.
I used Kaiser Unlocker V2.0 Made by Olipro - 2008
The phone actually dials the numbers but there is no sound either out or in.
also when recieving a txt message the vibrate remains on contant.
My Kaiser is running WM6.1
operator v 24.328.1.610
Rom version 3.28.61.0 WWE
date: 05/02/08
Radio Version 1.70.OliNex
protocol version 25.65.30.04H
Honestly i'm less than a neebie! Although an experenced PC engineer, I only wanted to undo the Orange SIM lock before I go overseas for 6 months to an area that only operates Cable & Wireless mobile.
Mentioned above is a note about out of date radio version, the Rom date does seem a little old for WM6.1, what should I be looking for to update the radio?
any advice is greatly recieved.
Thanks
Ian
the unlocker essentially uses a "special" radio+SPL combo that is meant for unlocking ONLY
you seem to still have the said radio version (indicated by the "1.70.OliNex" string)
so verify that your phone is indeed sim unlocked. then proceed to change your spl and radio to the recommended ones for windows mobile 6.1. the unlocking should "stick" after changing the radio+spl combo but do verify before starting and after completing the update.
nice to see you are a PC engineer so you'll have no trouble thoroughly reading the wiki (first link in my signature) and making sense of the wealth of information there on how to update your radio (get a suitable one from the "Ultimate Radio Thread" linked in my signature) and spl.
good luck!
Thanks very much, a temp radio... that makes sence.
Thanks again
Ian