Related
somewhere on the forum... i saw this picture of a tilt back cover, and the speaker was a circle, not a square, and the camera cover looked really nice, it had a metal cover to prevent scratches.
where can i find this?
you sure you weren't seeing the back of the Touch Polaris/Orbit 2?
we can made a camera friendly back cover ourselves
Hi All,
I am wonder if anyone would like to join my project of making a camera friendly back cover for our Kaiser.
I am a product designer in Hong Kong and also a Kaiser user. I know a local factory that produce aftermarket cases for PDAs, to make a back cover is not a hard job at all. All I would like to know is how many Kaiser would like to have this new back cover.
Elton
I'd be interested but depends on the quality of the cover of course. Also maybe we could use some really good glass on the rear cover over the camera, such as polarized glass with anti UV and flare coating, any optician should be able to make it, but might work out a little expensive for the glass alone.
aksd said:
I'd be interested but depends on the quality of the cover of course. Also maybe we could use some really good glass on the rear cover over the camera, such as polarized glass with anti UV and flare coating, any optician should be able to make it, but might work out a little expensive for the glass alone.
Click to expand...
Click to collapse
you need a photography quality glass for good quality photo. Plus in order to fit in to the original back cover, the glass needed to be really thin, that's another challenge. That's why some people in the forum prefer to take the plastic out.
regarding to the quality, the factory is a very experienced one, a simple back cover is too easy for them. All I worry is the cost and how we can spread them out evenly.
How hard would a "flip" cover be? My previous phone, Sony W810i had no protection for the lens, other than the clear plastic area for the lens. The
K750i had a "flip" cover, which fit the 810i like a glove.
How reasonable would it be, instead of a glass lens, to just produce a cover with a simple flip open or slide cover for the lens? Even with a glass area for the lens, you will still get stains, fingerprints etc.
I'd vote for a rear cover with a slide-open cover over the camera. This would allow the camera to be protected from dust and when open, don't use any additional glass, the pictures would be much sharper!
It would have to be a good design that could withstand repeated open-close cycles.
p51d007 said:
How hard would a "flip" cover be? My previous phone, Sony W810i had no protection for the lens, other than the clear plastic area for the lens. The
K750i had a "flip" cover, which fit the 810i like a glove.
How reasonable would it be, instead of a glass lens, to just produce a cover with a simple flip open or slide cover for the lens? Even with a glass area for the lens, you will still get stains, fingerprints etc.
Click to expand...
Click to collapse
I agree. The lens glass needs some sort of protection.
Nokia's N-95 puts the lens at the hinge where no one puts their finger. The HTC Kaiser/Tilt is in a very bad spot for fingers and setting it down into junk or against a sweaty (i.e. wet) shirt pocket.
Also, you might need some bumps on the back to raise the phone a bit since they managed to put the speaker on the back which is about as effective as ....
The back cover gets a bit hot at times too. Don't know what can be done about that.
firstbuddha said:
you sure you weren't seeing the back of the Touch Polaris/Orbit 2?
Click to expand...
Click to collapse
im sure. i know i saw it, but i dont know if it was edited, but it looked pretty real to me.
it looked almost identical to the kaiser's back, except instead of a square speaker, it was circle, and the camera had something better to protect it.
I meant a cover with a glass lens. Its always nice to have 2x times the protection
mikeeey said:
im sure. i know i saw it, but i dont know if it was edited, but it looked pretty real to me.
it looked almost identical to the kaiser's back, except instead of a square speaker, it was circle, and the camera had something better to protect it.
Click to expand...
Click to collapse
please let us know where you saw that cover. It would be nice if we can just pay for it.
Have you thought of using the invisible shield? this is cut with perfection, prevents scratches and marks on the device, and has a very accurate cut-out around the GPS and Camera recess.
www.shieldzone.com
flashy said:
Have you thought of using the invisible shield? this is cut with perfection, prevents scratches and marks on the device, and has a very accurate cut-out around the GPS and Camera recess.
www.shieldzone.com
Click to expand...
Click to collapse
I am not sure about putting another piece of plastic in front of the camera would be a good idea to improve the quality of the photo.
Anyway, I have contacted the factory about this project, they will let me know the cost in about two days. In the mean time, feel free to throw in new design idea.
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
You can count me in for the sliding back cover for the camera, that would be perfect!
pepeto2001 said:
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
Click to expand...
Click to collapse
when did i say cover the camera? i said it's been cut around it.
I doubt you will find better to be honest. Without looking silly. It looks like new all the tiem with my shield on.
pepeto2001 said:
this back cover should be great!!, i dont mind even the need os using my fingernails for sliding the protector, the fact is that camera lens will be protected in my pocket!!
Click to expand...
Click to collapse
no, I don't think finger nail is a good idea. If space is allowed, I hope to make a sliding door that can be opened by finger instead of finger nail.
Anyway, let's wait for the quote from the factory first.
Im interested too!
quotation received, but....
The factory replied with a quote but they made a mistake. The quote is for 1000 pieces of battery cover. I don't think we have that many people who would be interested in it, so I ask for a smaller quantity quote. They will get back to me tomorrow.
stay tune!
helpme said:
The factory replied with a quote but they made a mistake. The quote is for 1000 pieces of battery cover. I don't think we have that many people who would be interested in it, so I ask for a smaller quantity quote. They will get back to me tomorrow.
stay tune!
Click to expand...
Click to collapse
NO, NO, NO....
PM me with the 1000 piece price. I'm sure I could distribute these here in the US.
I have been having very blurry photos and thought it was the lens but it came to be somehow the battery cover pladtic lens cover is scuffed up..it looks like just surface scuffs does anyone recommend a good way to buff these out? I know they make things for car headlights that will get rid of scuffs and surface scratches..any alternatives for smaller scales for this case?
Some might suggest popping off the back cover plastic piece out.
I tried a few things to clean it, didn't do much. And it gets scuffy again sooner or later.
Me, i just drilled a small 2-3mm hole in the plastic piece where the camera lens looks through.
Sure it's not Chromatic Aberation?
pazookie said:
I have been having very blurry photos and thought it was the lens but it came to be somehow the battery cover pladtic lens cover is scuffed up.
Click to expand...
Click to collapse
The lens cover on my original HTC TyTN II battery cover appears to be coated thin glass so if yours is plastic that's a worry. As is, my camera suffers from Chromatic Aberation and thats something I learnt about here at xda-dev
it looks like just surface scuffs does anyone recommend a good way to buff these out? I know they make things for car headlights that will get rid of scuffs and surface scratches..any alternatives for smaller scales for this case?
Click to expand...
Click to collapse
If it's just the coating coming off (perhaps due to contact with fingerprint sweat), you could contact HTC/your hardware provider and see what they say about getting a warranty replacement.
Using dry a q-tip, I rubbed the coating off the lens window inside and out, and the pics are bright and clear now.
I took my plastic camera battery off. haven't had a problem since.
Oh what is a plastic camera battery. I want one, or do I?
Instructions on how to remove the camera cover here.
http://wmpoweruser.com/?p=339
Surur
Dont forget the importance of cleaning both sides
surur said:
Instructions on how to remove the camera cover
Click to expand...
Click to collapse
Along with mention that cleaning it on both sides also helps (in the comments at the bottom). The problem is of course that just by using the phone you are likely to get fingerprints all over it again. My solution is to carry a Klearscreen cleaning cloth with me in my Windows Mobile version of a laptop bag. I use that for both the screen and camera lense cover when I need to take pics.
Hey!
I thought of something. Perhaps someone could make a mould with the original back cover, and then remake it out of aluminium. That's all.
ridder215215 said:
Hey!
I thought of something. Perhaps someone could make a mould with the original back cover, and then remake it out of aluminium. That's all.
Click to expand...
Click to collapse
I would buy this in a heart-beat.
Wouldn't heat be an issue? My play can warm up a little bit just being idle in my pocket on a warm day.
Aluminum would help dissipate the heat quicker than the plastic cover which is more of an insulator.
I have doubts though about the durability and strength of a similarly thick aluminum cover. It would have to be much thicker than the plastic one to be of an protection.
Theres already one on ebay just search it
sent from my Xperia PLAY running DiXperia
All those on ebay are cases for the phone, i think we're talking about a replacement back panel here.
What i would REALLY like to see is a complete housing in aluminium, preferably anodized matte black.
Or somethign like the HTC one's body: http://www.tomsguide.com/us/HTC-One-S-Strong-Case-Ceramic-Metal-Process,news-14451.html
question is how will you put it on without damaging the tabs on the phone? we are able to put the back cover because it is flexible.
AudioCreaper said:
question is how will you put it on without damaging the tabs on the phone? we are able to put the back cover because it is flexible.
Click to expand...
Click to collapse
Very good point. Press tabs will require a flexible material like plastic. Most metal panels i've seen fit with a sliding lock.
This is one project that doesn't seem likely to see the light of day...
I was indeed thinking of a back cover replacement, and with an airbrushed-like look.
Aluminum cases produce Faraday cages (basically the device becomes shielded from radiation, including the wifi and 3g waves). Apple (first iPad 1 batches) and particularly Asus (Transformer Prime) have learnt that lesson at high costs.
doesn't the htc one that i mentioned earlier have an aluminum shell?
julianpaul said:
doesn't the htc one that i mentioned earlier have an aluminum shell?
Click to expand...
Click to collapse
Xperia play antenna placement is probably not optimised for a metal housing. The Sony Xperia S would have more luck on that matter due to it's (semi) external antenna.
+1 on the antenna topic. I dismantled my Play once and the antennas are on the back, it would be a very bad idea to use an all-aluminium back cover, unless you don't use 3G, wifi, GPS, etc...
I wish they had use the chrome all around, not just the sides, even if its fake chrome.
eksasol said:
I wish they had use the chrome all around, not just the sides, even if its fake chrome.
Click to expand...
Click to collapse
You're kidding right? You actually want an all-chrome phone?
I'd actually rather see Xperia PLAY get a battery cover that's made out of a grip-improving non-glossy matte material (like what the Xperia X10 has).
The Xperia Play battery cover is one of the worst parts of the phone. It's flimsy, plain and it attracts grime like a magnet. They need to improve it badly in a second iteration...
My favorite battery cover was the one on the Huawei Selina. While the phone itself is a piece of crap, the cover is firm, nice to handle and easy to remove.
Except for the chrome strips on the sides (and they weren't that bad), my zte blade/orange san francisco had such a nice rubbery matte finish. i hope manufacturers finally do the sensible thing and shift to matte finishes...
Metal Aluminum Plated Case for Sony Ericsson Xperia Play
Silver
http://www.ebay.co.uk/itm/Metal-Pla..._MobilePhonesCasesPouches&hash=item415c24d0c1
Black
http://www.ebay.co.uk/itm/Metal-Pla..._MobilePhonesCasesPouches&hash=item3cbaa0c03e
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
nemov said:
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
Click to expand...
Click to collapse
Just type xperia x compact skinobi in amazon. They make full body skins for the phone. I think amazon only carries the clear and carbon fiber one though. You can also google skinobi and their website will pop up with more styles/options.
nemov said:
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
Click to expand...
Click to collapse
I am using a Cut it yourself type plastic screen protector i got from Walmart....it's flawless
Hi,
in germany there is a frim which produce curved foil for the front and backside :
https://www.amazon.de/gp/product/B06XZCD6ZG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The problem is, that die foil isnt hard. So if you have bubbles under the foil and you press to much, the foil get damaged. I try ist with a little less power and the last bubbles gone away from semself after 2 days. It protects the full screen und full backcover.
Greetings Kullino
I got this skin for the back of my phone, which makes it much easier to hold and resists fingerprints a lot better than the shiny back. It also came with stickers for the sides, but I just used the one for the back, which adds texture and friction.
http://www.skinomi.com/sk27116-xperia-x-compact-phone-brushed-steel-protector.html
bofis said:
I got this skin for the back of my phone, which makes it much easier to hold and resists fingerprints a lot better than the shiny back. It also came with stickers for the sides, but I just used the one for the back, which adds texture and friction.
http://www.skinomi.com/sk27116-xperia-x-compact-phone-brushed-steel-protector.html
Click to expand...
Click to collapse
Would you mind uploading a picture of your phone as it currently is?
kwstas 13 said:
Would you mind uploading a picture of your phone as it currently is?
Click to expand...
Click to collapse
sorry this took so long, here's the back sticker. I've actually now put on the additional ones on the sides for extra friction in my car dock (it was sliding down with each bump, but holds better now)
bofis said:
sorry this took so long, here's the back sticker. I've actually now put on the additional ones on the sides for extra friction in my car dock (it was sliding down with each bump, but holds better now)
Click to expand...
Click to collapse
Really nice man, thanks for uploading those ones
nemov said:
HI folks, I've found the back of my X Compact to be pretty bad at collecting scratches - much worse than my Lumia 720 (wish more manufacturers would copy that design idea of a replaceable body!!) Anyway, I want a protective and/or grippy sticker of some sort. Ebay and Amazon have nothing to offer so far as I can tell, apart from metal plates for magnetic dash mounts. Any ideas? I would have thought there would be some kind of rubber sticker you could buy but no luck. Any ideas?
Click to expand...
Click to collapse
Very late response, but I've been using TPU case which protects back, sides, and gives a very small lip on front to keep screen off flat surface if laid on face.
https://www.amazon.com/gp/product/B01M1HIQ5C/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
case is soft and grippy, very happy with the result after 6 months.
very inexpensive <$10.
No need; apply wax polish. I used Novus Fine Scratch Remover (#2), but I would think car wax would work just as well. I used it to remove some marred patches from when I dropped the phone on hardwood floor and it skidded a bit, and not only did those patches disappear, but so did the fine scratches.
I don't think this would be wise for the screen, however, as it would probably harm the oleophobic coating.
Hello Everyone,
Been using the S21U for 2 weeks now and I have recently noticed micro scratches on the lens element!
The phone is in transparent TPU case since day 1 and I have hardly went outdoors. I traded off my S20+ and the camera bump didn't had a single line from 10 months of usage.
Has anyone encountered this? Maybe others can have a closer look now at their devices.
Any insights, suggestions on what needs to be done or can be prevented will be welcome!
Really sorry to hear that. Just out of precaution, I have placed a whitestone dome glass protector on mine, just because I dont want to experience anything like that with a EUR1300 phone. Not that much expensive and you get two protectors in the box.
shetty08 said:
Hello Everyone,
Been using the S21U for 2 weeks now and I have recently noticed micro scratches on the lens element!
The phone is in transparent TPU case since day 1 and I have hardly went outdoors. I traded off my S20+ and the camera bump didn't had a single line from 10 months of usage.
Has anyone encountered this? Maybe others can have a closer look now at their devices.
Any insights, suggestions on what needs to be done or can be prevented will be welcome!
Click to expand...
Click to collapse
how was it scratched? only from keys?
Be very wary of scratching this phone. I recently figured out that the S21 Ultra supposedly does not have the same Victus glass design as the Note 20 Ultra... It has a slightly modified form of Victus that's much, much thinner (as it's covered by another, easily scratch-able glass material...and so the cameras might be like this too)... So instead of being resistant to most micro-scratches, they are actually easier to get and become permanent immediately on this phone (learned this by scratching my display with denim jeans - no metal/button contact) =(.
I'm just assuming that they're doing this to increase their glass repair jobs... Granted, Apple has been doing this with their iPhones for an extremely long time now... But hey, Samsung has started acting kinda like they're the Apple-like company of Android, lol.
im sorry, but you what?
you scratched glass with jeans?
I'm a stainless steel fabricator do I'm in the worst possible job for scratching phones so have the screen and camera protected, ESR TPU for the front and LK glass for the camera, don't even notice they are on at all and only coast 20 yo-yos for both
The lenses don't scratch easily, but depending on what you do during your day you might end up with stuff in your pockets that will do it. There are a lot of glass protectors for the cameras out there for the S21U, for example in the US you can get a 2-pack from Spigen for $12, and a bunch more that are even cheaper.
If you get one, get one of the blacked out ones, You will get artifacts in your photos from the flash/AF light as they get channeled across the glass of the protector if you don't; learned that one from using clear cases over the years.
Are you sure the lenses are scratched or the camera bump? Because the camera bump is not made of glass! It's metal and the darker colors of phones will be a horrible one, especially phantom black!!
That's not the lense. It's a factory protector.
May have been marred during assembly.
Don't sweat as it can be replaced if needed. A very slight may no effect the images at all but because the otherall area is so small it might. Protectors are a waste of money; it -is- the lense protector!
Any added optic elements will degrade the image.
It's possible to polish out micro scratches with a clean, dry finger tip by rubbing back and forth on glass or antireflective coatings. Takes at least 30 minutes or more... if it really bugs you. Yes dry callus is abrasive and hard enough to polish glass.
Likewise even the smallest amount of grit, sand etc rubbed against it by your finger can marred it.
Don't use that opening in the case as a pickup point.
It can also be marred by improper cleaning. Only use a clean dry microfiber cloth. Wet it a little if need be. Ordinary cotton cloth will eventually cause scratches owing to unseen debris it picked up. Seen many a pair of glasses made of glass scratched like this. Grit stinks into the microfiber material away from the surface being cleaned helping to protect it.
My 10+ lense protector is plastic. I live in the desert. I occasionally clean it but only with a microfiber cloth the same way I treat high dollar optics. No damage after a year and a half.
Just use a good case with a raised cam guard.
blackhawk said:
That's not the lense. It's a factory protector.
May have been marred during assembly.
Don't sweat as it can be replaced if needed. A very slight may no effect the images at all but because the otherall area is so small it might. Protectors are a waste of money; it -is- the lense protector!
Any added optic elements will degrade the image.
It's possible to polish out micro scratches with a clean, dry finger tip by rubbing back and forth on glass or antireflective coatings. Takes at least 30 minutes or more... if it really bugs you. Yes dry callus is abrasive and hard enough to polish glass.
Likewise even the smallest amount of grit, sand etc rubbed against it by your finger can marred it.
Don't use that opening in the case as a pickup point.
It can also be marred by improper cleaning. Only use a clean dry microfiber cloth. Wet it a little if need be. Ordinary cotton cloth will eventually cause scratches owing to unseen debris it picked up. Seen many a pair of glasses made of glass scratched like this. Grit stinks into the microfiber material away from the surface being cleaned helping to protect it.
My 10+ lense protector is plastic. I live in the desert. I occasionally clean it but only with a microfiber cloth the same way I treat high dollar optics. No damage after a year and a half.
Just use a good case with a raised cam guard.
Click to expand...
Click to collapse
Hey thanks man for the reassuring reply!
As I said in the post, Its barely been 2 weeks and I didn't even travelled much, put it in jeans with keys, coins etc. It was lying dormant with little use.
On close inspection in direct sunlight / outdoors. I saw lines which are underneath the lens glass and not on the surface.
I just don't want the image quality to suffer and plus the service center sucks (experience in dealing with S20+)
Not sure if they will acknowledge it or tag it as a user handling damage.
What are my options?
nightoooo said:
Are you sure the lenses are scratched or the camera bump? Because the camera bump is not made of glass! It's metal and the darker colors of phones will be a horrible one, especially phantom black!!
Click to expand...
Click to collapse
The lens area only, the bump I know is metal and it is intact.
shetty08 said:
Hey thanks man for the reassuring reply!
As I said in the post, Its barely been 2 weeks and I didn't even travelled much, put it in jeans with keys, coins etc. It was lying dormant with little use.
On close inspection in direct sunlight / outdoors. I saw lines which are underneath the lens glass and not on the surface.
I just don't want the image quality to suffer and plus the service center sucks (experience in dealing with S20+)
Not sure if they will acknowledge it or tag it as a user handling damage.
What are my options?
Click to expand...
Click to collapse
If it's on the internal side there's no way you did. Make sure you specify that if returning it.
If it's on the inside without direct inspection it's hard to tell if it's on or into the glass.
It may simple be a smear albeit a hard to remove smear.
Either way shoddy assembly. Having put together thousands of display assemblies I was always careful that the internal surfaces were spotless.
They are selling camera protectors on aliexpress. However, they are not exactly sticking to the actual lens as they are slightly deeper. That basically would create s small gap between the camera lens and the protector. I would assume it MIGHT slightly degrade quality in some cases. Not sure but it may be worth trying out.
I solved all these problems I bought
Galaxy S21 Ultra Case with Camera Cover,S21 Ultra Slim
https://www.amazon.com/Polycarbonate-Protective-Shockproof-Upgraded-Samsung/dp/B08RRTLX71
shetty08 said:
Hello Everyone,
Been using the S21U for 2 weeks now and I have recently noticed micro scratches on the lens element!
The phone is in transparent TPU case since day 1 and I have hardly went outdoors. I traded off my S20+ and the camera bump didn't had a single line from 10 months of usage.
Has anyone encountered this? Maybe others can have a closer look now at their devices.
Any insights, suggestions on what needs to be done or can be prevented will be welcome!
Click to expand...
Click to collapse
I solved all these problems I bought
Galaxy S21 Ultra Case with Camera Cover,S21 Ultra Slim
oraned said:
I solved all these problems I bought
Galaxy S21 Ultra Case with Camera Cover,S21 Ultra Slim
Click to expand...
Click to collapse
I had one of these on my note20u ugliest case ever! But yeah it did its job of protecting.
blackhawk said:
If it's on the internal side there's no way you did. Make sure you specify that if returning it.
If it's on the inside without direct inspection it's hard to tell if it's on or into the glass.
It may simple be a smear albeit a hard to remove smear.
Either way shoddy assembly. Having put together thousands of display assemblies I was always careful that the internal surfaces were spotless.
Click to expand...
Click to collapse
hey man,
this smear or minute lines on the inside or whatever is really bugging me!
My experience with samsung support (In my region and India) hasn't been good in the past. They all act as fools who recommend factory reset via their tool for every issue.
My question is will samsung own this or pass on the blame to me as improper handling or usage marks.
I just don't want the already botched up image processing to suffer further.
shetty08 said:
hey man,
this smear or minute lines on the inside or whatever is really bugging me!
My experience with samsung support (In my region and India) hasn't been good in the past. They all act as fools who recommend factory reset via their tool for every issue.
My question is will samsung own this or pass on the blame to me as improper handling or usage marks.
I just don't want the already botched up image processing to suffer further.
Click to expand...
Click to collapse
Samsung phone support sucks, real bad.
You can send it in as it's clearly their fault but that will take a lot of time.
Remove back cover and clean or replace if need be. Make sure you have the OEM adhesive strips needed to reassemble it. The replacement lense protector is held on by an adhesive strip*.
It may be easier to get the whole OEM rear panel assembly.
If you do it yourself use heat carefully/evenly and take as long as it takes to carefully pry it open without breaking it. A small amount of isopropyl alcohol can be injected to help break the adhesive seal.
*it maybe replaceable without taking off the rear cover but that maybe hard or impossible to do without marring the cover.
adamlee2012 said:
Keys/coins couldn't scratch the glass anyway. Physically impossible as the glass is harder.
Click to expand...
Click to collapse
Sand will easily scratch it. The OP stated that the marks are on the inside, an assembly blunder.
satanatos said:
Really sorry to hear that. Just out of precaution, I have placed a whitestone dome glass protector on mine, just because I dont want to experience anything like that with a EUR1300 phone. Not that much expensive and you get two protectors in the box.
Click to expand...
Click to collapse
I just got the Whitestone lens protector myself it's pretty awesome stays on REAL well and adds a bit more sexiness to the already sexy camera bump