diamond late ringing - Touch Diamond, MDA Compact IV General

hi there
has anyone come up with a tweak that lets you hear the phone ring at the same time as the person phoning you, it also carries on for three rings after the other person has hung up.
Also my old tytn could be turned sideways to write text messages and emails which means you could use a larger virtual keyboard could this be possible on the diamond
many thanks
dennis

same problem
Same problem here...
One observation though:
The phone light(round light) actually starts blinking insntaneously when theres an incoming call... that means, theres no hardware/reception/radio problem with the diamond; which is a good news.
Any fix for this yet...
Tanks,
Sandeep

http://forum.xda-developers.com/showthread.php?p=2793104#post2793104

drushen said:
hi there
has anyone come up with a tweak that lets you hear the phone ring at the same time as the person phoning you, it also carries on for three rings after the other person has hung up.
Also my old tytn could be turned sideways to write text messages and emails which means you could use a larger virtual keyboard could this be possible on the diamond
many thanks
dennis
Click to expand...
Click to collapse
did u actually find a solution for this cos my fone does the same thing ,, ?

Related

Backlight Defaults to MINIMAL After a Call! And Other Problems.

Good Afternoon
I had a new TyTN II Delivered from orange after mine was nabbed at the weekend, and i locked it remotely. When i make a call now all is hunky dory, but whilst in that call if i go to press START for example nothing will happen, so again i try another way and press X to go to the today screen to then press start, Nothing happens.
I inform my caller ill call them back, and end the call by either pressing "End Call" or pressing the Red Button, and then instantly the Back light defaults to a very low setting, and it did NOT do this on my previous TyTN II.
I have spent a fair while looking through here and google (and also MoDaCo Forums) trying to find a solution. I only know of one other person on MoDaCo who has the problem, and i have tried hard reset on the device too to no avail.
It is a Orange HTC TyTN II, so i have called them also for advice and they know about as much about it as i do.
This is a plea for someone here maybe to lend me a hand and sort this out, otherwise its going to collide with the nearest large surface in the next few days ha ha.
Thanks again for reading, and I hope someone can help me!
Sean Saunders
screen off
I select don't blank/turn screen off in a call, as I often want to enter dtmfs for mailboxes, or conf calls, downside uses a bit more battery
Hi mgr2003.
I have these options set, and it doesnt make a blind bit of difference unfortunately. I was hoping for some kind of CAB file for a fix? I dont know whats wrong with this device but its not as good as my previous TyTN II.
Sean
This question keeps being asked about once every week since the TyTNII came out. Sorry, but it is getting a bit annoying....
Once again: it´s caused by a bug in the HTC ROM and happens when a device password is set and the backlight times out during a call. Solution: disable the device password or - if you want to keep the password - push the power button twice after a call and you are back in business.....
That would be an all well and good answer but i do not have a password set on my device, so the answer doesnt justify?
Cheers for the Advice though.
Sean
I also have that problem with my tilt....when i am on a call the screen turns off..How can i disable this?
In that case I apologize for my somewhat rude reply. Your problem description just seemed to fit that bug exactly....
Sorry, have no idea what else may be causing that behaviour. Good luck, and if you manage to fix your issue be sure to let us know!
Did you use Kaiser Tweak to disable fast sleep?
Hi
I havent done anything to the device, it is exactly as shipped by OrangeUK. Its only 3 days old now, so not even had a second to do anything but use it.
Sean
I have an Orange TYTN II and this bugged me too.
Download Kaiser Tweak http://forum.xda-developers.com/showthread.php?t=333898
Follow instructions on thread and disable Fast Sleep (advised)
Normal Backlight and Power Settings will still be active

How to disable call history after phone call?

hi, when i make a call and end it, the call history pops up. is there a way to disable this? i tried searching but only got the opposite- how to add a call history tab in TF3D!
kpm197 said:
hi, when i make a call and end it, the call history pops up. is there a way to disable this? i tried searching but only got the opposite- how to add a call history tab in TF3D!
Click to expand...
Click to collapse
yes you can. learn yr settings!
settings/phone/advanced/"add new phone number to contacts at end of call"
have you seen htc's manual?
KukurikU said:
yes you can. learn yr settings!
settings/phone/advanced/"add new phone number to contacts at end of call"
have you seen htc's manual?
Click to expand...
Click to collapse
hi, thanks for responding but youve misundertood. after each call the number pad comes up with the my last dialled calls. but ive just discovered the screen im referring to disappears by itself after 3-4 seconds.
ps. of course i havent read the manual, im a bloke
I´m also find that thing a litte bit anoying. So I would be great if there was a way to get rid of it.
Waiting is boooring
Would be nice indeed - especially as I almost always try to press 'Home' and the phone calls no1 in the list :/
I have noticed it to turn off by itself - still think its pretty useless...
The 'store unknown no. after call' on the other hand I really like
This has been a feature of Windows Mobile for years. I've developed a habbit of pressing the hangup button twice when I end a call, this makes the phone screen disappear.
Sorry for the bump, but I to find this "feature" very annoying - quite often i call someone from list call history list by accident after finishing a call
Anyone ??
Cheers, Jesper
i was writing about that here http://forum.xda-developers.com/showthread.php?t=459066 very annoying - still no solution for that ...

PROBLEM : Call drops after first ring?

Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html

[email protected]#[email protected]@#%!!

Loving the Diamond... but big issues have come up and they are starting to make it difficult to really use the device. I am trying to determine if the issues I am having are brought on by myself or if the issues are related to some challenge with the phone or my carrier.
"What's the issue," you ask?
The Diamond will not pick up a call. The phone will ring, the caller display will come up, I'll try and pick it up by either pushing the onscreen command or pick it up via the pick-up button... nothing. The call rings through to voicemail. Meanwhile I have to call the person back who just called me. Massively irritating and even more irritating it's does actually pick up SOMETIMES. The problem is I cannot determine why it works sometimes and why it does not. 90% of the time it does not work. When I do get it to work all I need to do is activate my bluetooth headset and then turn it back off and we are back in the same situation where the phone will not answer, however, this time... the phone does not RING either! Yes that's right - all sounds go bye bye on the phone when I activate BT and then turn it off. Also, I cannot pick up the phone with bluetooth headset. I can hear the phone ring through and everything looks dandy but no go! Push the pick-up button - nothing. This isn't such a big deal really - I mean - who cares if it picks up on the BT headset - I just want to be able to answer a call in general!
Now - I do have a lot of applications on the machine from a modifcation perspective and I am thinking this could all very well be my fault. I have Advance Config, Diamond TF3D config, and Diamond Tweak all loaded (each have their own benefit.)
Strange thing is... I just did a test and the phone picks up JUST FINE. I'm about ready to pull my hair out. It's really hard to put my finger on it. Tried it a second time, if I try to answer with the soft key it won't work but the hard key will work. Now the hard key will not actually hang up the call - I have to use the softkey to hang it up. I don't know if anyone is having the same issues but I am to the point of hard-reset to start from scratch.
I actually had the "can't pick up" problem just yesterday, but with my Prophet. Using Pdaviet's MyVista 6.1 Rom and S2U2. The phone rang, S2U2 displaying the full screen call notification, no chance of picking up the call.
Do you also use S2U2?
When you find your self in a hole, it usually helps if you stop digging.
Unpalatable as it might seem, I think with hassles like you've got, a HR is probably your best option.
ps, just a thought, have you at any stage in your tweaking done any button or key re-mapping... either inadvertently or by design? Maybe worth a check before giving up
wow, that's a whole load of issues
I've had my Diamond for about a week now..... and have had none of those issues..... Bluetooth works fine, picking up is a breeze....
what provider are you with?
I remember reading more complaints about sound going bye after Bluetooth use in the early days of the Diamond. Try searching around a bit and see if you can find something. However, seeing your other issues, a hard-reset might not be out of place.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Click to expand...
Click to collapse
By far probably the best advise yet!
The emotional side... aka incredible hulk... came out and punched shift/keyboard number row (pounded rather.) I was thinking in my head, "smash Diamond" and the KB had to take the abuse.
Carrier information for those who asked.
CDMA Diamond on the lovely Telus system (aka - Tel-us, we take your money)
As with all troubleshooting, you need to start from beginning. When you first got the phone, it could answer call. Right? So you need to trace back to what have you done to the phone step by step and to find out when it starts to fail.
Doh... Well I reset the device... seems to work now but something that seemed to be working before was my Zune subscription music from Zune Pass was synching to my mobile device via a Synch Center setup. I was amazed it was actually working... now it's not working So - I get calling back and lose the little trick that was working - Zune Pass DRM music synching with my Diamond... you win some and you lose some I guess doh.
jessiethe3rd said:
Loving the Diamond... but big issues have come up and they are starting to ma...my carrier.
"What's the issue," you ask?........... The call rings through to voicemail. Meanwhile I have to call the person back ............who just called me. Massively irritating and ev............... to hang it up. I don't know if anyone is having the same issues but I am to......... the point of hard-reset to start from scrat.........ch.
Click to expand...
Click to collapse
You should do some research and some reading.
And relax a little before you Fire up and disrupt a Community in peace.
I have the same thing going on now... same programs installed as you.
Is it still working after a hard reset? Did you re-install all the same programs?
Well, I'm on a Telus Diamond, and had the no answer problem, and solved it with a hard reset.. just try it, it doesn't take too much to get everything back to the way you had everything..

Delay between I pick up a call and hear the callers voice HELLLPPPPP!!!!!

Guys please maybe this time you'll help me, i think I saw somewhere on the forum this problem but can;t find it now. The problem is when somebody's calling me and I pick up the phone I have to say HELO, HELO few times and there is no answer from the other side. This delay lasts about 2 - 3 second from the picking up the call.HOW to hear the caller right after pressing answer button????? I'm starting to loosing my nervous to this phone-even the worst crap for 10$ doesn't have so many problems with BASICS things like calling,texting -as this toy for 500$ ....
I guess I'm again the only one with this. If U don't know how to help me just write you've got the same to make me fell not the only one that have that issue
Same Problem
Yes mate,
i do have the same problem.1.93 rom
Same here.. Hello? Hello? Hello, oh - yes - now I can hear you. Happens all the time with my phone.
Yep same with me, and my bro's HD
Try picking the phone after 3-4 rings .. may be that'll help cut down the delay.

Categories

Resources