Hi all
I am Essam,
I just have an issue when I am trying to upgrade my ROM
I download WM6.1 from the HTC.com and upgrade my older wm6.0
After that I want to change that ROM with a new one (cooked/normal) but every time I try to do this the setup failed and gives me an error message
So I can’t change the ROM at all
Ii have tried diff ROM but in vain
I don’t know what to do i am new in this field plz give me a hand
You need to be alot more specific
1. did you use jumpSPL---HardSPL what version
2. What phone are you using, If a Tilt then the htc rom wont work unless you have done step 1.
3. Did you read how to do this (custom roms)
4. Why didnt you post in the correct section, you should not have even posted a new thread because your answers are in the rom section in the stickys.
Im not trying to sound like a jerk, but you need to read. If you just don't know what your doing then don't.
i did use a HardSPL
and i read how to setup custom ROM and done exactly what i have read
and sorry for posting in the wrong section
Related
Hi,
First i red the wiki.
Everytime i try to Update my MDA III (GER TMOB101).
I used the how to to upgrade an run fix.bat but it says wrong password with all roms that ive tested.
Any advice?
1) Well if you read wiki then you should have posted in that thread. The one that says HELP!
2) Read the faQ about type I and Type II roms (might answer your wrong password problem)
3) Do you think we all have a crystal ball that tells us what rom you are using as an upgrade? Well we don't
PS asking a question like that will not get you many answeres.
Hi,
I Had Really Alot of problems with my network and the phone droped almost all my calls
so i decided that i will go back to my stock SPL and go for warrenty
coz i searched the fourm and i didn't find a soultion for this problem
I just need to know the steps that i have 2 do + i don't remember the stock rom that was in my HD ~
Thanks !
goto http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
there are all the stock roms available, find the one that suits your needs
goto http://forum.xda-developers.com/showthread.php?t=431217
this is hard spl topic, read the instructions (7 simple steps) to downgrade your spl to default.
IF YOU USED USPL YOU DO NOT HAVE TO REVERT ANY SPL
Yeah I Used USPL ,
So I Only Have To Istall An Official Rom and the spl will go back as it was ?!
The Probllem Is That I Don't Know What Is My First Official Rom :s ?!
Is There Anything I Can Find from using the s/n or something !
basically spl will not return to normal as it actually did it the first time you reset your phone, anyway yep you just need to install stock rom. not to be rude mate but did you actually check the links I provided? in the first one there is a list of all stock roms, which of course depend from vendor, country, language etc. If your rom was for example in arabic + english there is only one you can download, therefore that must be the one. if not, you will have to read, read, read and then read the related threads for those roms until you find your one.
you could also goto htc site and try to download, if present, a rom update for your device. you will have to enter the IMEI of your phone and if your code is accepted, you will be 100% sure that you are allowed to flash that rom in your phone. and your warranty will be ok
I wish people didn't user Rapidshare who offer neither:
There are no more download slots available for free users right now. If you don't want to become a premium member, you might want to try again later.
That's about the sum of it. Sadly I too have a dead screen I need to restore to factory.
Hi,
I have my HD from march and being interested in WM6.5 and disappointed by HTC because they do not release an upgrade I decided to try some cooked roms.
I used USPL so that I can keep my original SPL.
I tried:
* Duttys WM6.5 Sense 2.1 Holy Grail
* Duttys WM6.5 Leo Holy Grail
* Topix HD
From the first boot I have noisy screen image with 4 colours or something .... but after entering in sleep mode and restore it recovers to normal "true color" until I reset the device. I can live with that but the real issue is that I cannot start my phone using the original radio neither with the latest versions I found for HTC HD. No error there, it simply stays off after I confirm that I want to enable the phone.
Also the device is hanging for very long time now and then and I have exactly the same problem/behaviour with all the above roms. I tried some fixes found in the forum but nothing works and I did not found anybody with the same weird behaviour.
I wand to recover my stock firmware but I found that even I brought mine from Romania it has a Czech S/N and HTC does not provide a stock ROM for this "v1.56.402 - Czech republic - not supported".
What can I do. do you guys know if I can get the original firmware from somewhere?
Thanks.
Obviously you havent bothered to read anything let alone the guidelines of starting new threads.
The answers are in the forum I suggest you take time to read and start by reading the forum guidelines and the sticky threads.
If you dont understand what you're doing then stick to a stock ROM until you do or you might brick your phone.
You say that you used uspl. Are you sure that it was successful as the symptoms you describe are typical when you have the incorrect spl for the rom you are using. After using uspl, what spl is showing in the bootloader screen?
Follow the steps in the Dummies Guide to Flashing and your problems should be sorted out.
If you still have further questions, post them in that thread as the mods will close this one as soon as they come across it (as explained by homer285)
you're ok as long as you can still go to bootloader mode, then go back to the uspl 2.5 guide here, FOLLOW INSTRUCTIONS STEP BY STEP
http://forum.xda-developers.com/showthread.php?t=505377
and here
http://forum.xda-developers.com/showthread.php?t=462347
format your sd card using fat32 (full format) (if you are a frequent flasher I suggest you get a small capacity sd card – 1Gb - and devote this only for flashing)
rename the RUU_signed.nbh to BLACIMG.nbh and pair this with ROMUpdateUtility -(application file) OR BlackstoneRUUWrapper (whichever the ROM cook presents) copy these TWO files in your formatted sd card.
then using Digital Outcast's USPL GUI: look here
http://forum.xda-developers.com/showthread.php?t=508361
if you're using Vista see this to update your sync driver
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
flash the ROM.
I hope I make the above clear to you.
suggestion: Read the howtos!
If I was you I would do like this:
- flash hspl.
- flash latest radio from memorystick
- flash any 23xxx-rom from memstick (miri or phamQ can I recommend).
Cant understand why you are doing it the complicated way... there are ways to recover to original-spl if needed. This is the easyest way to flash 6.5 and it is almost fail-safe.
good luck!
brumbrum said:
suggestion: Read the howtos!
If I was you I would do like this:
- flash hspl.
- flash latest radio from memorystick
- flash any 23xxx-rom from memstick (miri or phamQ can I recommend).
Cant understand why you are doing it the complicated way... there are ways to recover to original-spl if needed. This is the easyest way to do it and it is almost fail-safe.
good luck!
Click to expand...
Click to collapse
dont add to the confusion, he is already using USPL, the SAFEST METHOD as stated by Dutty Throy, he even advocates this in all of his cooked ROMs
all he needs to do is to redo the steps again as i posted above.
Sorry for my panic post
Yes, after 8 hours of trying stuff I did not read post guide-lines but I searched all the internet and xda forums, tried all the dumb fixes for my weird behaviours without any success.
I am sure that my original rom it is not available and I call for help from people that have Czech S/N English version to extract the flash and the radio if it is no so complicated or if they have it as backup.
Actually I read every "flashing for dummies" posts and only when I thought I got everything I started to flash it.
I used the latest 2.5 USPL, the GUI one and also the command line from the cmd prompt so I saw all the output lines and there was no error at all. It is clear that the device was successfully flashed and I respected all the version requirements stated in description of the packages. The problem comes from some sort of incompatibility. The versions at boot is the right one.
The only wrong thing I did was after seeing USPL 2.5 coloured boot loader I go on with the tutorial which said to read on screen RUU instructions which said to connect with activesync and I did as they said and restart the device, cradle and continue flashing in which case the original SPL started and I got a flashing error on the desktop client but after restarting the device everything run normally with the stock firmware and I think I have a good understanding on how it work and I can say that that error does not hurt a bit.
I finally succeed, in the morning, to flash 6.1 vanilla topaz and almost everything works except the GPS module and I am investigating this issue.
It is clear that you cannot help me an my device issue related to WM6.5 roms are unique and I will investigate this on my own.
Sorry to everybody, again, for my wrong located post and have a nice day.
I dont know if iam posting in the right area, this thread may be posted but i couldnt find it! I'm a noob user to X1 someone plz help me to with upgrading WM 6.1 to WM 6.5 so i can get "Touch-IT_BT_23541_2.1" on my phone. I have been tried to flash this rom to my phone for like 2 days now but it keep getting stuck at the loading screen (the screen after the tricolour screen)!
Thx n sorry if i posted in the wrong area and sorry about if this post already posted!
Read the stickies, and hardSPL before flash
ok thx but do i need to upggrade to wm 6.5 to flash that rom to my phone?
hardSPL will make yoou able to flash a wm6.5 ROM.
And as I said, read the stickies:
1. How To Backup Your Stock Rom
2. How To Install HARD_SPL (So that you can install custom roms)
3. How To Install A Custom Rom
4. How To Install The Stock Rom (For Warranty Reasons)
5. How To Install STOCK_SPL (Final Part For Warranty Reasons)
I did it like this:
1. Install Hard_SPL.
2. Download a different rom, unrar it and run the RUU (RomUpdateUtility).
ok, the stickies and guides at the top of each forum exist for a reason.....so queries like yours can be answered without having to create more threads. Please post your queries in the existing threads (stickies)
Thread closed
Alright ive seriously looked all over the threads and i cant find out how to properly install a rom Ive tried serverl times and nothing works i have a htc pure could some one please point me in the right direction!!!!
Come on dude, the 3rd thread in this forum has the unlocker http://forum.xda-developers.com/showthread.php?t=520312 once thats done then follow the guide at the top of this forum and then flash away any cooked ROMs
Yea.... Ive followed the steps and i keep getting error message about failing to comunicate how do i install the cab ?
Just take it slow and easy....
vtonyv said:
Yea.... Ive followed the steps and i keep getting error message about failing to comunicate how do i install the cab ?
Click to expand...
Click to collapse
Hi vtonyv!
Carefully read through this thread:
http://forum.xda-developers.com/showthread.php?t=520312
The first item on the check list is this file that you need to unlock your phone for flashing custom ROMs:
http://forum.xda-developers.com/attachment.php?attachmentid=232404&d=1254155235
The second item in the checklist states that the phone must be connected via active sync or Center for windows mobile in order to unlock you rphone.
You must do this otherwise you will get a error message like the one you described.
So, take your time and read the WHOLE first thread in the top of my post, and and after that go look around this forum for a nice ROM to try.
I recomend any of NRGZ28 ROMs. They show you what your phone should have been when you bought it.
The easiest way to flash your Topaz is to use the SD-card flashing method.
Please look in this excellent guide how to flash your phone!:
http://forum.xda-developers.com/showthread.php?t=585201
Good luck and just take it slow!!
// ohamn