s2u2-bug - Touch Diamond, MDA Compact IV General

hey, got a small bug using s2u2 for some time now: its just when the diamond is in sleep mode and i push the on/off-button, the phone wakes up, but only for half a second the screen with the s2u2wallpaper is shown, then it just disappears making it impossible for me to unlock it by sliding. then i have to push the on/off-button again, and then the screen stays and i'm able to unslide the phone.
its not really a big problem, but it keeps buggin me. if anyone got any experience with this one, please help !
thanks in advance!
toRf

Sorry, I can't help you. But can I suggest you post your issue in the S2U2 thread, where the developer and the many other users might be of help? Good luck!

Related

Screen Alignment Issue

Hello,
I have a T Mobile branded Kaiser and for some reason it suffers from a screen Alignment problem. It is really bizarre because it fixes by itself after a short period of time. It happens once or twice a week and it really gets on my nerves.
Have you guys experienced this on your phones?
Have you got any ideas?
Thanks for help in advance!
hi,i have the same problem.its like theres loads shxt running in the back ground then sorts itself.if you get a solution please PM me.
many thanks
Ok. I will do

Backlight Defaults to MINIMAL After a Call! And Other Problems.

Good Afternoon
I had a new TyTN II Delivered from orange after mine was nabbed at the weekend, and i locked it remotely. When i make a call now all is hunky dory, but whilst in that call if i go to press START for example nothing will happen, so again i try another way and press X to go to the today screen to then press start, Nothing happens.
I inform my caller ill call them back, and end the call by either pressing "End Call" or pressing the Red Button, and then instantly the Back light defaults to a very low setting, and it did NOT do this on my previous TyTN II.
I have spent a fair while looking through here and google (and also MoDaCo Forums) trying to find a solution. I only know of one other person on MoDaCo who has the problem, and i have tried hard reset on the device too to no avail.
It is a Orange HTC TyTN II, so i have called them also for advice and they know about as much about it as i do.
This is a plea for someone here maybe to lend me a hand and sort this out, otherwise its going to collide with the nearest large surface in the next few days ha ha.
Thanks again for reading, and I hope someone can help me!
Sean Saunders
screen off
I select don't blank/turn screen off in a call, as I often want to enter dtmfs for mailboxes, or conf calls, downside uses a bit more battery
Hi mgr2003.
I have these options set, and it doesnt make a blind bit of difference unfortunately. I was hoping for some kind of CAB file for a fix? I dont know whats wrong with this device but its not as good as my previous TyTN II.
Sean
This question keeps being asked about once every week since the TyTNII came out. Sorry, but it is getting a bit annoying....
Once again: it´s caused by a bug in the HTC ROM and happens when a device password is set and the backlight times out during a call. Solution: disable the device password or - if you want to keep the password - push the power button twice after a call and you are back in business.....
That would be an all well and good answer but i do not have a password set on my device, so the answer doesnt justify?
Cheers for the Advice though.
Sean
I also have that problem with my tilt....when i am on a call the screen turns off..How can i disable this?
In that case I apologize for my somewhat rude reply. Your problem description just seemed to fit that bug exactly....
Sorry, have no idea what else may be causing that behaviour. Good luck, and if you manage to fix your issue be sure to let us know!
Did you use Kaiser Tweak to disable fast sleep?
Hi
I havent done anything to the device, it is exactly as shipped by OrangeUK. Its only 3 days old now, so not even had a second to do anything but use it.
Sean
I have an Orange TYTN II and this bugged me too.
Download Kaiser Tweak http://forum.xda-developers.com/showthread.php?t=333898
Follow instructions on thread and disable Fast Sleep (advised)
Normal Backlight and Power Settings will still be active

PROBLEM : Call drops after first ring?

Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
DanGlee said:
Hi,
I'm having trouble with my Diamond. When a private number calls, it gets dropped after the first ring, before I get a change to get then phone even out of my pocket?
Its really frustrating... and its starting to do it on number, unbarred numbers?
Has anybody seen anything like this before? It doesn't happen all the time, but its getting pretty consistent!
I'm running SwiftBL 5.6 and Radio 100.05.25
Please help!
DG.
Click to expand...
Click to collapse
yes, I'm experiencing the same thing too and I'm using the official 1.93 rom.
as far as I know, it doesn't only affect private call and the problem is very random.
What I notice is the phone will keep ringing until you press any button or the touchscreen to answer or mute the call and that's the time the phone will drop the call....hoping to find solution too....
I had the same problem with the HTC 1.93 ROM. Changing radios made no difference. Switched to Swift v5.6 and all is OK. BTW am in UK on Orange.
even with 1.37 rom, i'm also having the problem....wonder does anyone know what's the problem and solution....
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
vibecatalin said:
I had this problem after I've tried to sort out the 3 sec delay problem... After a Hard Reset and not playing with the 3 sec delay problem everything is fine....
Click to expand...
Click to collapse
hmm....I didn't mess with that delay at all but still the problem is there...
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Yeah, thats exactly it I think... because its always in my pocket, but I have the HTC case, which by the time I've either take it out of my pocket or out of the case, the call has gone!
Does anybody have a link for that app s2u2.
I will try this... because I tried changing the ringer settings and all sorts, and nothing helped! All the iPhone and N95 guys are slagging me at work! Apart from that its by far the best phone in the office
Cheers for the help!
Will report back if I find that and app if it works!
DG
http://forum.xda-developers.com/showthread.php?t=412418
Grtzzz
baraata said:
Lay your phone on the table and try again.
Most comes with the problem in your pocket.
As soon as the phone rings the touchscreen is enabled and it drops the call because it thinks you pressed ignore.
This problem can be solved by s2u2.
I had the same problem and solved it with this program.
It blockes your touchscreen unless you slide it from left to right completely.
Grtzzzz
Click to expand...
Click to collapse
definitely not due to that problem. Numerous time, my phone was not in my pocket but on the desk already. A couple of time when the phone ring, I pick it up and press the answer button(touchscreen and hardware button) but it just drop the call....haizzzz
No one else has this problem?
I'm getting exactly the same problem (I'm using the official Vodafone 1.93 ROM)...really annoying!
I am getting this problem too... anybody have a solution? Whenever a private number comes in, when i click on the answer tab, the call will just disconnect... this is very fustrating...
I also get this issue, always with a private number and sometimes with a stored number. At first I thought it was becuase I was touching the screen when I first took the phone out of my pocket but like someone else said this also happens when its on a table.
Any help would be really appreciated!!
try this forum.xda-developers.com/archive/index.php/t-258109.html

Please Help White screen, discoloration, and unresponsive touch

Hi all,
I have a T-mobile wing and it has the stock rom on it. Also, it is not hard spl anymore. I used to have open touch 6.1 lite diamond. The phone turns on and makes the keyboard sound. When it turns on there is a white screen but if you move the screen out so that the keyboard is visible you can see a discolored screen with windows mobile on it. Also, you cannot use the touch screen. The farthest you can get is the welcome screen that has the align screen but it wont align. Would anyone be kind enough to please help me with this issue. I greatly appreciate the help and great thanks to all in advance. I have read around in the forums and it says to buy a new screen, a digitizer, or fix the display drivers. I currently think it might be a software problem but I do not know where to start. Again any help is appreciated and thank you all again in advance for your help.
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
obsidian06 said:
Have you given the unit some time indoors to warm up? Working for Garmin tech support, I have seen many wierd thing go on with screens and electronic device as a whole when it starts getting cold outside.
Then again, it may be something that is going on with the software of the phone. Something along the lines of a display driver.
Click to expand...
Click to collapse
Thank you very much for responding. Yes, I have let the unit warm up. At first this problem went away but it came back after. What do you mean by display drivers? Do you think I should hard-spl again and try a new rom? And if that doesn't work, should i open up the unit and see if the cable it tightly attatched? Before the discoloration, I was able to use my phone with open touch 6.1 lite, but there was a white screen when the keyboard was not visible. Also, when i moved the keyboard, the phone would work by allowing to me call and text but it would freeze a lot. I hope this clarification helps.
Mod please move to herald section because this topic may or may not pertain to herald mobile 6.
Would anyone please help me I would greatly appreciate any advice, thanks in advance to all. p.s. I added pics and the touch screen doesn't work, the physical keys kind of work when the screen is viewable.
Reply please!
did you ever figure it out!? oh wow finally i found someone with a similar problem. my wing was in my pocket at work when the first similar signs arose. ITS PRACTICALLY BRAND NEW! it did that for a while and now the screen is just all white=( PLEASE help! anything would be good. i just want to know if its fixable or should i just get a new phone. you can email me too at [email protected]

My Diamond's screen can not be aligned.

I have a hTC Touch Diamond and recently found the machine's screen can not be aligned. Not actually not alignable but sometimes it shifts to left or right. Sometimes, when the machine is recharging, making a call or using Wifi, it becomes hot! and it happens the problem. Today, I found it will has the problem when I holding it on my hand. I will need to perform the screen alignment 100 times a day.
Anybody could help to fix this problem? Or even though you tell me the term of this issue would be appreciated.
Thanks & Regards,
Season Lau
Please search as there is a Cab for this....
Hey seasonlau,
There are more people who have the same problem as you.
Check here: http://forum.xda-developers.com/showthread.php?t=438733
seasonlau said:
I have a hTC Touch Diamond and recently found the machine's screen can not be aligned. Not actually not alignable but sometimes it shifts to left or right. Sometimes, when the machine is recharging, making a call or using Wifi, it becomes hot! and it happens the problem. Today, I found it will has the problem when I holding it on my hand. I will need to perform the screen alignment 100 times a day.
Anybody could help to fix this problem? Or even though you tell me the term of this issue would be appreciated.
Thanks & Regards,
Season Lau
Click to expand...
Click to collapse
I had this issue. The only solution is to exchange the device for another one.

Categories

Resources