Related
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot
Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.
well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine
U can also try different cable, just to be sure its not the cable that is causing these problems.
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?
Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing
I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)
I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?
This is my first time use WM,so please for give me don't know too much about WM.Yesterday I bought a Chinese Version Diamond,Simple operation I can handle,but when I use USB cable connect to PC,that just charge,no any signal to connect computer,Do someone can tell me what to do?
Thanks
This is my first time use WM,so please for give me don't know too much about WM.Yesterday I bought a Chinese Version Diamond,Simple operation I can handle,but when I use USB cable connect to PC,that just charge,no any signal to connect computer,Do someone can tell me what to do?
Thanks
Probably, the cable is defective. Use original, or try to change to other one.
me 2
I have tyhe same problem....i have 2 cables....both work...both original and bought one.
It was working great before....but now it just loads the battery.
I get the options on my phone screen when i connect the usb cable and whatever i choose the pc doesn't respond at all....just like my phone doesn't exist.
I have the newest activesync installed on windows vista ultimate 32bit (Retail)
Please help me!!!
ediking007 said:
Probably, the cable is defective. Use original, or try to change to other one.
Click to expand...
Click to collapse
I have two cable,both used in other phone is fine,I think the problem not in cable but thanks your help
Th3rm1t3 said:
I have tyhe same problem....i have 2 cables....both work...both original and bought one.
It was working great before....but now it just loads the battery.
I get the options on my phone screen when i connect the usb cable and whatever i choose the pc doesn't respond at all....just like my phone doesn't exist.
I have the newest activesync installed on windows vista ultimate 32bit (Retail)
Please help me!!!
Click to expand...
Click to collapse
How long you bought your diamond?
I bought mine a few days ago....why?
This pisses me off.....i was starting to love this phone but now it's just a piece of sh*t.
Please help me.....anyone!?
Th3rm1t3 said:
I bought mine a few days ago....why?
This pisses me off.....i was starting to love this phone but now it's just a piece of sh*t.
Please help me.....anyone!?
Click to expand...
Click to collapse
I got the exact same problem as well and I'm using the original HTC USB cable. When I connect the phone with the cable to the computer, it only charge the battery. Please help!
I'm trying everything right now....i will tell u if i succeed in fixing this.
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
I read in some Taiwan wedsite,they said ActiveSync can't match XP sp3,and my PC is sp3 =.=",what can I do?
Th3rm1t3 said:
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
Click to expand...
Click to collapse
Congratulation!!!!
But my phone didn't work on this solution,I read some news in Taiwan wed site they said ActiveSync can't match XP sp3,unfortunately my PC is sp3,any friends can tell me what to do?
Thanks a lot
I hope it will work out for u
Good luck.
Th3rm1t3 said:
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
Click to expand...
Click to collapse
Well, I had tried the above but still connect to PC. Please HELP!
I had exactly the same problem. It connects to PC if you put the cable on and off for about 10 times....
I think diamond needs to "heat up" before computer recognice it Not very convenient...
I used to connect my diamond with PC normally. But just suddently it doesn't work now.
Mine did not connect untill I put the CD into my laptop that came with my Diamond. Sounds silly but have you done that?
uniqueboy said:
Mine did not connect untill I put the CD into my laptop that came with my Diamond. Sounds silly but have you done that?
Click to expand...
Click to collapse
I try try
louis138 said:
I try try
Click to expand...
Click to collapse
Lol, worked.
edit: False alarm, didnt work afterall...
woo...very interesting,today I tell to a friend about my Diamond can't link to PC,because my friend have Diamond too,he think many way to help me but all didn't work,at last we talking about the CD,because we was talking on phone,so we just said disk one & two and which file must save in PC.....etc.
Suddenly my friend tell me "put disk two fifth file in your PC".......I open disk two but no fifth file,it just have four fileso tomorrow he will give me him disk to try,I holp this can fix my problem but I have a idea after I try many way today,I think the problem 90% on the firewall but now I am very tired,I will focus on firewall tomorrow
I Know Alot of people have Asked , Ive also read alot of the responses to them.And i really hate asking people for help when its my fault lol.
So im stuck in the Tri-Colour Bootloader with RUUNBH In the top right hand corner.
-Ive tried using mtty But cant select USB even though ive unchecked Allow usb connections and closed activesync
-Tried Reinstalling 2 other ROMS.
Any ideas , Ideally if someone has a ROM for Three Australia thatd be awesome.
Again sorry for asking the same question heaps of others have askes
Ill Donate a bit to whoever helps me fix it
-Ive tried using mtty But cant select USB even though ive unchecked Allow usb connections and closed activesync
1 . connect cable!!!
2/ press enter (round button) to switch between serial/usb
My Screen Says USB it just wont work. If anyone can point me to a thread where my issue is solved or help me fix it , it would be greatly appreciated . As im going on holidays in a day and really need my phone.
Thanks
any sound from pc like a device plugged in?
No , No Sound . I Really hope its not bricked and i can fix this
mtty are known to not work on vista and windows 7 sometime. please try using windows xp.
checked cable?
The cable was fine prior to the update. Ill Try on Xp
Ok Some Success , I got it onto the Black Screen that Says Touch Diamond
this happens when i plug my phone up to my computer and yes i installed the drivers using a vista 64 bit
One of the usb attached to this computer has malfunctioned. and windows does not recognize it.
Desg90000 said:
this happens when i plug my phone up to my computer and yes i installed the drivers using a vista 64 bit
One of the usb attached to this computer has malfunctioned. and windows does not recognize it.
Click to expand...
Click to collapse
This is a complete first thread/post failure. Your thread title must be more specific than "help" and you have no information in your post about your issue. Figure out how forums work if you really would like a response that helps your issue.
did u try turning it off and on again? (lol jk - IT Crowd joke)
Have you tried other usb ports?
I would try restarting both the devices.
xtremekilla09 said:
did u try turning it off and on again? (lol jk - IT Crowd joke)
Have you tried other usb ports?
I would try restarting both the devices.
Click to expand...
Click to collapse
Do you have the original box the computer came in? Box it up and send it back, you're too stupid to own a computer (another good IT crowd joke)
Did you mount the phone so Windows can use it as a drive?
flashman2002 said:
This is a complete first thread/post failure. Your thread title must be more specific than "help" and you have no information in your post about your issue. Figure out how forums work if you really would like a response that helps your issue.
Click to expand...
Click to collapse
i do have information in my post about my info if you actually read i said that the usb is failing.
yes i tried it on both of my front usb ports and my 2 open back ones and neither worked i restarted both devices numerous times
Sorry to jump on the bandwagon here.... Box both of 'em up and send them back!
But seriously, that error message really doesn't tell us much. I've seen a few people say that 64bit OSes don't seem to like our phone very much. Try it on another computer, maybe one that is 32bit instead and see if you get the same error. Remember to install the drivers on the computer first before plugging in the phone.
miztaken1312 said:
Sorry to jump on the bandwagon here.... Box both of 'em up and send them back!
But seriously, that error message really doesn't tell us much. I've seen a few people say that 64bit OSes don't seem to like our phone very much. Try it on another computer, maybe one that is 32bit instead and see if you get the same error. Remember to install the drivers on the computer first before plugging in the phone.
Click to expand...
Click to collapse
Box yourself up and wait for a more experienced user to come along *snickers*
Athailias said:
Box yourself up and wait for a more experienced user to come along *snickers*
Click to expand...
Click to collapse
XD
Got a big enough box? I'm nearly 6ft tall.