Database Develop

error 300 on upgrading

Ive been upgrading my o2 rom to the most recent. It got to 99% then came up with an error. When i turn it on now it only goes to the 3 colour boot screen, says at the bottom usb is connected but comes up with error 300 when i come to flash it.
I think after all the playing around trying to get it working Ive gone below the 50% battery full.
Had a good look round the forum, but couldn't find a fix.
I think its time for bin!

marfanuk said:
Had a good look round the forum, but couldn't find a fix.
I think its time for bin!
Click to expand...
Click to collapse
It's NOT time for the bin.
Try to charge your battery on another phone or borrow a full one. Then try to flash back same ROM you had before the crash.
Also give us more info about your phone; HELP US HELP YOU!

I Have The Same Problem
What I Can Do To Bypass This Error

mestrini said:
It's NOT time for the bin.
Try to charge your battery on another phone or borrow a full one. Then try to flash back same ROM you had before the crash.
Also give us more info about your phone; HELP US HELP YOU!
Click to expand...
Click to collapse
thats easier said than done. I dont actually know anyone with a PDA let alone a spare charged battery.
Thanks for your suggestion though.

Ive just fixed the problem and its working great again.
heres what I did...
I charged my phone via my mains charger - it didnt say it was charging, but it did.
Then I followed epimazzo' post...
My Wizard was almost bricked at that time and after I speak with an I-mate technical guy, I got the following:
1. Make sure your i-mate™ K-JAM is not Connected to the PC and remove the dummy card or SD/MMC card
2. On your Desktop PC, open Microsoft ActiveSync, then go to File >Connection Settings >Remove the Selection from “Allow USB Connection with this desktop computer”
3. Reconnect your i-mate K-JAM to the Desktop PC using the USB Cradle and the Charger MUST be Connected to the Cradle (Don’t use the IrDA or Bluetooth for the Upgrade)
4. Run the Upgrade again and it will work fine without any problems.
While upgrading, the ActiveSync program will not go on, however the upgrade is running.
Click to expand...
Click to collapse
I just flashed it with the ROM and it installed perfectly.
thanks epimazzo

Cingular 8125 not recognized by ActiveSync

hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb

Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.

Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...

ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b

Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.

Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440

I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.

calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?

Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.

crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...

Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck

dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!

Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas

no usb activity

First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick

Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391

I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.

Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.

I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?

Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282

when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot

Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?

you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box

jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.

well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine

U can also try different cable, just to be sure its not the cable that is causing these problems.

maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...

pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?

Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.

Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing

I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)

I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?

ActiveSync does not work

hey guys,
im new here and its also my first ppc.
ive got the following problem:
me (or my ppc) is not able to connect with activesync...
wtf can i do??
plz help me, thx,
LuFo

Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?

so, here we go:
ive got as 4.5 on my pc and ive recognized also that some other guys (even with older as) could connect to my ppc...
so, what is thie fckn prob??
again: plz help, what should i do?
greetz

PaulusUK said:
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
Click to expand...
Click to collapse
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz

i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.

LuFo Diamond said:
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
Click to expand...
Click to collapse
untick the advanced network functionality in the connection settings USB to PC and try again ...

swampy said:
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
Click to expand...
Click to collapse
2nd that. Try another USB port on your PC. Sounds like there's either the driver missing (which should only be the case if you do not have Active Sync installed)
OR
try to disable the "Advanced network functionality". Can be found at 'Settings > Connections > USB to PC'. (Einstellungen, Verbindungen, USB zu PC oder so).

Do you have some sort of firewall software?
like, ZoneAlarm or antivirus with firewall?
disable them or allow the port as trusted and you should be fine

jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...

try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.

thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.

LuFo Diamond said:
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
Click to expand...
Click to collapse
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx

here it is
LuFo Diamond said:
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
Click to expand...
Click to collapse
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..

Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.

cJosephaq said:
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
Click to expand...
Click to collapse
Try the search engine before you post, recently there where alot of topics on ActiveSync not working. Anyway, the way your PPC will act when you connect it to a USB port can be setup in setting, connections, usb to pc. Mark Diskdrive or ActiveSync.
There you should also unmark the advanced network functionality. Check it off and try again.
Rgds,

Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.

cJosephaq said:
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
Click to expand...
Click to collapse
A Hard Reset should bring it back to it's default value so yes I see no problem there ...

Blazeitup123 said:
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
Click to expand...
Click to collapse
THX a lot, but all these programs are NOT running, ive tryed to run them and its juts possible tu run mobsync.exe mannually...
so this way would not work for me,
im sorry

on6hp said:
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Click to expand...
Click to collapse
my pc works with xp prof sp3

abinan said:
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Click to expand...
Click to collapse
jeah, this possibility is also told as the first option but , im sad, not the solution...
greetz

Xperia X8 USB Mass Storage Issue

I have strange issue that's driving me crazy when i need it. I am user of GingeDX (v030 shakira stock). Several days ago i updated the custom rom with the latest version (v030) and installed GAPPS. Yesterday i plugged my USB in my PC to add the fix for GalleryDX (which was bugged and hotfix was avalable in the topic). When i connected my phone with usb and then to my pc (on my phone it said its connected) but nothing was showing either on my desktop or in Computer. I'd also want to add that the same day - Sony PC Companion required some update and i did it.
Then i tried something else to use the usb connect via Sony PC Companion and it worked only to open the sd card so i can place the GalleryDX fix i was talking about above. I was thinking that it's some kainda bug that will be away when i restart my pc but not. Then i restarted my phone, nothing again. Then erased all data from my sd card but nothing again. My last option was to wipe data/reset to factory via ClockworkMod but nothing again....
So my problem is that when i plugin my usb to phone and pc nothing is showing but my phone is saying its connected to pc. Days before everything was okay.
I also want to add that i use Windows Vista 32 bit Home Premium SP2 is someone is in need of that info.
I really need some help about that because it's anoying.
Thanks in advance
ADDOriN

Did you touch the green android logo on the usb connection page?
When you touch it the usb mass storage is activated..

CtrlAltDelIrl said:
Did you touch the green android logo on the usb connection page?
When you touch it the usb mass storage is activated..
Click to expand...
Click to collapse
Ofc i did. Thats where its saying its connected but its not showing a thing on my pc.

ADDOriN said:
Ofc i did. Thats where its saying its connected but its not showing a thing on my pc.
Click to expand...
Click to collapse
The problem is not with the rom, but with ur usb port...there could be two options available, either dont have the drivers installed,(usb), or ur cable is malfunctioning...
Sent from my X8 using xda app-developers app

HemdonG said:
The problem is not with the rom, but with ur usb port...there could be two options available, either dont have the drivers installed,(usb), or ur cable is malfunctioning...
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
His usb cable and port are fine, if they weren't he wouldn't be able to connect.
Wait some time if you hadn't, it may take a while.
If you have adb set on your computer run this command:
adb devices
If nothing shows up the problem are the drivers...
If that's not the case then try with another sd card and see if it works

You might have a virus in your PC. Try connecting your phone in another computer that has a good anti-virus installed.
Question: are you able to see the device in your PC but not the files? Or, nothing is showing?

ADDOriN said:
Ofc i did. Thats where its saying its connected but its not showing a thing on my pc.
Click to expand...
Click to collapse
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!

CtrlAltDelIrl said:
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
Click to expand...
Click to collapse
lmao. vista. i missed them fangs. :thumbup:
@op: most people here have already given possible solutions. have you tried it on a different pc and/or a different cable?
[cAs]

CtrlAltDelIrl said:
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
Click to expand...
Click to collapse
@CtrlAltDelIrl Mate i'm really sorry about leaving only "ofc i did" but i was in a hurry and really had no time. Also i'm not here to argue i just wanted to tell you that i did. Thanks for your help and sorry if there is anything.
@stamatis Thank You for the "other SD Card" solution. I took my second SD Card from my phone's box and it worked. Then i attached my old sd card (that was not working so far) and it ALSO worked. I did it many times and now it's working...... quite strange i think that second card and fix that but it did. Awesome! Thank You.
@Everyone else - Thank you guys for the responce about my issue. Now everything is fine If i have any more questions i'll ask ahead.
PS. Yeah i know Vista. I hate it more that you imagine. I know how to install new one but i'm not into intalling everything all over again. I just installed new OS on my second PC so yeah.... its pain.

CtrlAltDelIrl said:
You make no mention of it in your long post. How are we supposed to guess?
And you say "ofc i did" when it's not even obvious.
Bet you still havn't touched the green android!
Some people just can't see help when it's staring them in the face.
These people use Vista!!
Click to expand...
Click to collapse
No offence. But next time dont deduce somethings like this, if u cant help.
Sent from a god in Heavens