Database Develop

no usb activity

First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick

Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391

I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.

Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.

I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?

Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282

when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot

Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?

you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box

jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.

well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine

U can also try different cable, just to be sure its not the cable that is causing these problems.

maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...

pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?

Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.

Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing

I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)

I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?

My Diamond can't connect to PC

This is my first time use WM,so please for give me don't know too much about WM.Yesterday I bought a Chinese Version Diamond,Simple operation I can handle,but when I use USB cable connect to PC,that just charge,no any signal to connect computer,Do someone can tell me what to do?
Thanks

This is my first time use WM,so please for give me don't know too much about WM.Yesterday I bought a Chinese Version Diamond,Simple operation I can handle,but when I use USB cable connect to PC,that just charge,no any signal to connect computer,Do someone can tell me what to do?
Thanks

Probably, the cable is defective. Use original, or try to change to other one.

me 2
I have tyhe same problem....i have 2 cables....both work...both original and bought one.
It was working great before....but now it just loads the battery.
I get the options on my phone screen when i connect the usb cable and whatever i choose the pc doesn't respond at all....just like my phone doesn't exist.
I have the newest activesync installed on windows vista ultimate 32bit (Retail)
Please help me!!!

ediking007 said:
Probably, the cable is defective. Use original, or try to change to other one.
Click to expand...
Click to collapse
I have two cable,both used in other phone is fine,I think the problem not in cable but thanks your help

Th3rm1t3 said:
I have tyhe same problem....i have 2 cables....both work...both original and bought one.
It was working great before....but now it just loads the battery.
I get the options on my phone screen when i connect the usb cable and whatever i choose the pc doesn't respond at all....just like my phone doesn't exist.
I have the newest activesync installed on windows vista ultimate 32bit (Retail)
Please help me!!!
Click to expand...
Click to collapse
How long you bought your diamond?

I bought mine a few days ago....why?
This pisses me off.....i was starting to love this phone but now it's just a piece of sh*t.
Please help me.....anyone!?

Th3rm1t3 said:
I bought mine a few days ago....why?
This pisses me off.....i was starting to love this phone but now it's just a piece of sh*t.
Please help me.....anyone!?
Click to expand...
Click to collapse
I got the exact same problem as well and I'm using the original HTC USB cable. When I connect the phone with the cable to the computer, it only charge the battery. Please help!

I'm trying everything right now....i will tell u if i succeed in fixing this.

YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"

I read in some Taiwan wedsite,they said ActiveSync can't match XP sp3,and my PC is sp3 =.=",what can I do?

Th3rm1t3 said:
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
Click to expand...
Click to collapse
Congratulation!!!!
But my phone didn't work on this solution,I read some news in Taiwan wed site they said ActiveSync can't match XP sp3,unfortunately my PC is sp3,any friends can tell me what to do?
Thanks a lot

I hope it will work out for u
Good luck.

Th3rm1t3 said:
YESSSSS.....i fixed it....
go to start menu.....options.....System......power supply
and check the square "when unit power is on don't charge battery with computer....usb"
Click to expand...
Click to collapse
Well, I had tried the above but still connect to PC. Please HELP!

I had exactly the same problem. It connects to PC if you put the cable on and off for about 10 times....
I think diamond needs to "heat up" before computer recognice it Not very convenient...

I used to connect my diamond with PC normally. But just suddently it doesn't work now.

Mine did not connect untill I put the CD into my laptop that came with my Diamond. Sounds silly but have you done that?

uniqueboy said:
Mine did not connect untill I put the CD into my laptop that came with my Diamond. Sounds silly but have you done that?
Click to expand...
Click to collapse
I try try

louis138 said:
I try try
Click to expand...
Click to collapse
Lol, worked.
edit: False alarm, didnt work afterall...

woo...very interesting,today I tell to a friend about my Diamond can't link to PC,because my friend have Diamond too,he think many way to help me but all didn't work,at last we talking about the CD,because we was talking on phone,so we just said disk one & two and which file must save in PC.....etc.
Suddenly my friend tell me "put disk two fifth file in your PC".......I open disk two but no fifth file,it just have four fileso tomorrow he will give me him disk to try,I holp this can fix my problem but I have a idea after I try many way today,I think the problem 90% on the firewall but now I am very tired,I will focus on firewall tomorrow

Computer does not detect phone.

Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!

jerryjohn said:
Hi there, I reset my Tilt to factory settings yesterday and now when I plug it into my computer it does not detect anything.
The phone does charge, so I know that the connection is there.
I've had this problem before but I can't remember what exactly it is that I did to fix it. I've searched the forum and I can't find anything helpful either.
Anyone know what I need to do to fix this?
Thanks!
Click to expand...
Click to collapse
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.

hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)

mdbq said:
hello,
i've got the same problem, did what you said, but it doesn't work...
and i need the mobile device center connection to flash my tytn! ;-)
Click to expand...
Click to collapse
You should be able to flash using your micro SD.

ChumleyEX said:
You should be able to flash using your micro SD.
Click to expand...
Click to collapse
............but unfortunately you need to initially flash Hardspl thru your PC, from then on everything can be done through the SD card.

details details..
Have you tried another cable?

hi, i got this problem tu. i plug in the usb cable, but nothing appeared on my computer.id doesnt say it detected anything (usually it says found new hardware). i tried with several usb cables.still the same. but the phone is charged with all those cables i tried.

Yeah tried it and still got nothing. I am so stuck on what it could be.

I've tried 3 different cables and still have nothing. It worked a couple days ago, but ever since I reformated my phone it stopped working.
I don't understand why my computer doesn't automatically detect it as it did in the past.

reformat it again?
/grasp at straws

My tilt is doing the same thing. 2 days ago I was updating it and when I connected it to the computer nothing happened. Yesterday I tried flashing a new rom, thinking it would wipe it clean and make it connect again, however, it did not work. I am at a loss. Any ideas?

did hard reset and still unable to detect my phone.i'm using G.DK. ROM

i still have the problem
i trized a lot of cables, but from now the computer even don't say that it an unknown plyg is, he simply doesnt detect it. i'm just able to charge my phone, that's it
and in fact i just wanna put the official french rom on it because it's in dutch, i'm bilingual but it's more pleasant to have my phone in my mother language!
tahnks all of you for your help!

denco7 said:
Go to settings> connections > usb to pc> and uncheck advanced network functionality or enable faster data sync, Whatever it says.
Click to expand...
Click to collapse
Hmmm, this is starting to smell more than fishy with more and more complaints popping up... Just wiped out my laptop thinking it was an update that killed activesync; complete wipe and still no connection; every and any other type of usb cables connect flawlessly from camera, psp, ds, dsi, usb plug in all work no prob; yet kaiser refuses to sync even with new cables before and after activesync updates

Try a different PC if possible. Make sure Active Sync or Mobile Center is installed prior to plugging it in.

Another one
--DELETE THIS POST-- I added to it, then accidentally double-posted.

Another one
I'll add to the pile. Exact same problem. ActiveSync doesn't work, but phone does charge. Various cables used, hard reset done. Haven't yet flashed a new ROM, though. I'm using an HTC official 6.1.
Last successful run of ActiveSync was May 8th. I used System Restore on my PC to pre-date May 8th. Still nothing.
Didn't make any major installations to either the PC (XP SP3) or the Tilt on or around that date. It just...stopped working.
All other functions seemed to work normally, except that I got an alert from QuickGPS that it hadn't been updated since that date. I was able to update that successfully.

Same problem on my fathers tytn II... probably HW prob. Will look into it...

igord said:
Same problem on my fathers tytn II... probably HW prob. Will look into it...
Click to expand...
Click to collapse
Yep, it's definitely a hardware issue with the Kaisers usb port not fully connecting; I pushed the usb bar in a bit with the back end of the stylus and presto! Connected immediately

I'll also confirm success by the use of a little bit of brute force. Back end of stylus, a little manipulation, connect, and the "ba-DING!" sound in XP. Wish I'd done that before a hard reset...

[Q] USB Malfunction (Vista 64bit)

this happens when i plug my phone up to my computer and yes i installed the drivers using a vista 64 bit
One of the usb attached to this computer has malfunctioned. and windows does not recognize it.

Desg90000 said:
this happens when i plug my phone up to my computer and yes i installed the drivers using a vista 64 bit
One of the usb attached to this computer has malfunctioned. and windows does not recognize it.
Click to expand...
Click to collapse
This is a complete first thread/post failure. Your thread title must be more specific than "help" and you have no information in your post about your issue. Figure out how forums work if you really would like a response that helps your issue.

did u try turning it off and on again? (lol jk - IT Crowd joke)
Have you tried other usb ports?
I would try restarting both the devices.

xtremekilla09 said:
did u try turning it off and on again? (lol jk - IT Crowd joke)
Have you tried other usb ports?
I would try restarting both the devices.
Click to expand...
Click to collapse
Do you have the original box the computer came in? Box it up and send it back, you're too stupid to own a computer (another good IT crowd joke)
Did you mount the phone so Windows can use it as a drive?

flashman2002 said:
This is a complete first thread/post failure. Your thread title must be more specific than "help" and you have no information in your post about your issue. Figure out how forums work if you really would like a response that helps your issue.
Click to expand...
Click to collapse
i do have information in my post about my info if you actually read i said that the usb is failing.
yes i tried it on both of my front usb ports and my 2 open back ones and neither worked i restarted both devices numerous times

Sorry to jump on the bandwagon here.... Box both of 'em up and send them back!
But seriously, that error message really doesn't tell us much. I've seen a few people say that 64bit OSes don't seem to like our phone very much. Try it on another computer, maybe one that is 32bit instead and see if you get the same error. Remember to install the drivers on the computer first before plugging in the phone.

miztaken1312 said:
Sorry to jump on the bandwagon here.... Box both of 'em up and send them back!
But seriously, that error message really doesn't tell us much. I've seen a few people say that 64bit OSes don't seem to like our phone very much. Try it on another computer, maybe one that is 32bit instead and see if you get the same error. Remember to install the drivers on the computer first before plugging in the phone.
Click to expand...
Click to collapse
Box yourself up and wait for a more experienced user to come along *snickers*

Athailias said:
Box yourself up and wait for a more experienced user to come along *snickers*
Click to expand...
Click to collapse
XD
Got a big enough box? I'm nearly 6ft tall.

[Q] Downgrading Bootloader, STUCK.

Hello all, I have an HTC HD7 TMOUS - UNLOCKED, working in Asia Subcontinent. I bought the phone and was stupid enough to update it to mango as soon as I got home. Now I'm stuck with 5.12 Bootloader. Okay, so I followed all the tutorials and then:-
1) Made a goldcard for one of my microsd cards. It's 1 GB so using EASEUS partition I built it down to 512mb on FAT32.
2) Extracted RUU_Signed, renamed it to SCHUIMG.nbh and copied it to card. Then patched my goldcard on it using Goldcardtool.
3) I made a USB Y cable myself as I didn't have one. I cut 2 Data Cables. One that I had to connect to my HD7 and the other that I had to connect to my HTC Evo 3D, This device I had to use as a card reader (USB Mass Storage) as I had no access to a female usb port. I joined the black and red wires of power and both data cables. I only joined the green wire with green and white with white of the two data cables.
4) I loaded my HD7 in USB host mode and then connected the other side of Y cable to Evo 3D. It began charging but didn't display the dialogue for USB Mass Storage. I switched the wires, and still the same thing happened. I booted my E3D into recovery, so that I can mount mass storage from there, clicked on mount, still nothing.
Nothing happens, it just keeps saying 'Enter USB Host Mode..'. I let the connection stay for 5+ mins before getting angry and taking it out. If anyone has any clue or idea or solution, please put it forward. I spent a great deal of time trying to unlock my phone and also writing this thread. Lol.
Thanks to anyone in advance who replies.
XDA Rocks.

Come onnnnn, 167 views and no replies?
Sent from my HTC EVO 3D X515m using XDA

Ah, seriously the support's much better over the Android section. :/

maybe try asking in this thread, here.
i haven't ever used Goldcard method, so can't comment further.

sh4d0w86 said:
maybe try asking in this thread, here.
i haven't ever used Goldcard method, so can't comment further.
Click to expand...
Click to collapse
Thanks, I'm gonna try that too now. Just btw, my bootloader shows 'Serial' written down where it's supposed to show 'USB' as I saw in many pics. Does this mean something bad?

AliiYousuf said:
Thanks, I'm gonna try that too now. Just btw, my bootloader shows 'Serial' written down where it's supposed to show 'USB' as I saw in many pics. Does this mean something bad?
Click to expand...
Click to collapse
that could mean a half brick. if it is, the method described by the tutorial, i believe, will unbrick Bootloader.

sh4d0w86 said:
that could mean a half brick. if it is, the method described by the tutorial, i believe, will unbrick Bootloader.
Click to expand...
Click to collapse
How come its half-bricked? When I bought the phone it was barely used, I updated it to Mango myself and then used it. Never tried to unlock it or anything. And now that I tried, I noticed Serial already. can I have a link to types of bricks and solutions etc? Thanks a lot.

AliiYousuf said:
How come its half-bricked? When I bought the phone it was barely used, I updated it to Mango myself and then used it. Never tried to unlock it or anything. And now that I tried, I noticed Serial already. can I have a link to types of bricks and solutions etc? Thanks a lot.
Click to expand...
Click to collapse
well, first...
does Serial change to USB when you connect your device to your computer via USB cable?
if it doesn't, it is half-bricked.
half brick: broken Bootloader, but a functional device
full brick: broken Bootloader and a nonfunctional device

no!!!
if the serial is not changing to USB...that means you dont have a driver on your pc.....and it is not being recognized by the pc....
Install the latest ActiveSync driver and it should work