hey guys,
im new here and its also my first ppc.
ive got the following problem:
me (or my ppc) is not able to connect with activesync...
wtf can i do??
plz help me, thx,
LuFo
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
so, here we go:
ive got as 4.5 on my pc and ive recognized also that some other guys (even with older as) could connect to my ppc...
so, what is thie fckn prob??
again: plz help, what should i do?
greetz
PaulusUK said:
Install AS 4.5
Then connect your phone. Windows will first detect it as a new USB device and then AS will kick in and ask to set up a partnership.
Exactly what is going wrong with yours?
Click to expand...
Click to collapse
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
LuFo Diamond said:
ok, i connest my ppc to the pc, its asking:
harddrive
or
as,
im typing as and its saying there isnt installed as 4.5
and the pc sais: no connection do u want to start the fixing??
(everythings translated by myself from german, plz ignore the faults)
grtz
Click to expand...
Click to collapse
untick the advanced network functionality in the connection settings USB to PC and try again ...
swampy said:
i read that if you're using a usb hub it would not connect. you must have the usb cable connect straight to your pc's usb port.
and if nothing works the last solution is to hard reset your pocket pc for a frest start and see if it can connect then.
Click to expand...
Click to collapse
2nd that. Try another USB port on your PC. Sounds like there's either the driver missing (which should only be the case if you do not have Active Sync installed)
OR
try to disable the "Advanced network functionality". Can be found at 'Settings > Connections > USB to PC'. (Einstellungen, Verbindungen, USB zu PC oder so).
Do you have some sort of firewall software?
like, ZoneAlarm or antivirus with firewall?
disable them or allow the port as trusted and you should be fine
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
LuFo Diamond said:
jeah,
thanks for this many posts, but ive got all these probs outa my way, these are all the things ive thought they may disturb the connection... but (im sorry) theyre no solution for my fckn prob, as told, my ppc connects to other pcs(with older as)but not to mine with the newest as ...
so, lets think how to manage it...
Click to expand...
Click to collapse
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
here it is
LuFo Diamond said:
thats an answer
thx a lot, ill try tomorrow...
all the wa<y, sometimes, when i stay the ppc connected and reboot my pc it works, but dont sync anything, its just "connected"...
ill try and post my answer soon.
Click to expand...
Click to collapse
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
cJosephaq said:
Hi the diamond is my first PPC as well. I connected it in my PC and was able to use it as a HD. however i am having doubts of just unplugging it afterwards but i did just unplugged it after use.
On my second attempt. Diamond notified me if i will sync or use the HD i accidentally hit sync. but it required a password. I unplugged it and the problem beginned.
There is no Start Menu. so i did the soft reset on the red button below the stylus. It worked now, however the home screen does not have the Large Digital Clock now.
Can someone help me to display it back i have tried to check it in the Today menu. however it is still not appearing.
Pls.. help a new PPC user. Thank you.
Click to expand...
Click to collapse
Try the search engine before you post, recently there where alot of topics on ActiveSync not working. Anyway, the way your PPC will act when you connect it to a USB port can be setup in setting, connections, usb to pc. Mark Diskdrive or ActiveSync.
There you should also unmark the advanced network functionality. Check it off and try again.
Rgds,
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
cJosephaq said:
Thanks, by the way do you know how to display the Large Digital Clock again in Home. It was lost after i tried to soft reset my hanging Diamond.
Do you think it will appear again if i do a Hard Reset? Thanks.
Click to expand...
Click to collapse
A Hard Reset should bring it back to it's default value so yes I see no problem there ...
Blazeitup123 said:
try rebooting the host PC or just kill mobsync.exe, wmdc.exe and WmdHost.exe in taskmanger. Then open Sync software again. Works for me.
Click to expand...
Click to collapse
THX a lot, but all these programs are NOT running, ive tryed to run them and its juts possible tu run mobsync.exe mannually...
so this way would not work for me,
im sorry
on6hp said:
what OS do u have on your PC?
Did you download the newest WMDC also,
just checking http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center.mspx
Click to expand...
Click to collapse
my pc works with xp prof sp3
abinan said:
I think i have found a solution for you.
Follow:
Start Menu > Configuration > Connections > Click on the icon called "USB à ordinateur" (my phone is in french so i think it will be for you " USB" or "USB to PC")
It's written: Choose the connection type to PC
Select active Sync and uncheck the case just under (it is " activate the feature advanced networking")
And that is !!
TRY and say me..
Click to expand...
Click to collapse
jeah, this possibility is also told as the first option but , im sad, not the solution...
greetz
Related
Hey everyone, i just was getting ready to update to the new core rom (from xplore 1.1) and i plugged in my Tmobile mda into my pc that is running xp, and it is not connecting. When i plug it in it like doesnt even try to find it. And when it does try to find it, it just says it can't establish connection with your item.
I was using xplore and this is the first time i had this problem ever. Ive flashed 4 or 5 times and this has never happened, and thats why im posting it in the wm6 forum.
Does anyone have any ideas? HAs this happened to anyone else?
Now i am back on the newest tmobile update, and it is still doing it. Also i installed the newest version of active sync. Still no go. Also i used shell tools to put xplore on my phone, could that have left out some active sync's files? (probably not, last time i put nottosmarts rom on here everything worked perfect.
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.26.10.2
love you
umm....no one?
can't someone at least flame me or something? im still stuck
jawnsixteen said:
umm....no one?
can't someone at least flame me or something? im still stuck
Click to expand...
Click to collapse
I can flame you , lol
If you can't connect, how did you flashed the latest TMobile ? I am not making fun, I really want to help.
i threw it in bootloader mode. It said usb in the bottom right hand corner. It's just that activve sync is not connecting with it. i wouldnt even care, but i think you need an active connection to active sync when you flash with shell tools, which is what i do.
update: i just succesfully sync'd to my laptop running windows vista.
anichillus, do you know if shell tools will work with the new way to flash with vista?
thank you so much for reponding, i really appreciate it...a lot lol
the only reason im doing this is to get to your rom!
jawnsixteen said:
i threw it in bootloader mode. It said usb in the bottom right hand corner. It's just that activve sync is not connecting with it. i wouldnt even care, but i think you need an active connection to active sync when you flash with shell tools, which is what i do.
update: i just succesfully sync'd to my laptop running windows vista.
anichillus, do you know if shell tools will work with the new way to flash with vista?
thank you so much for reponding, i really appreciate it...a lot lol
the only reason im doing this is to get to your rom!
Click to expand...
Click to collapse
I really really don't know that sorry ... I am using WinXP and not shelltool.
Also, why are you using Shell Tool ? Dont't you have G3 ?
Unlock it and easy as pie. I remember papamopps saying that it is possible to flash in vista ...but i don't remember anything about shell tool ...
BTW, you have ZoneAlarm ..or similar installed to the PC where you say that it doesn't connect ? Try and disable firewall ... antivirus ..stuff like that.
well i just don't want to void my warranty, but ill definitly try turning off all the firewalls tommorow when i get a chance, i think im just going to give it a go with shell tools right now and hope for the best
Thank you so much and if you ever need anything i would love to help you in return.
you're the best!
i have the same problem..active sync doesn´t find my wizard..but it´s charging normally, but active sync doesn´t recognize it or i don´t know..what should i do?? i didn´t do any change on my pc..and before it works good..
If you're using Microsoft's OneCare then you may have to enable the Allow ActiveSync to get it to work.
Start OneCare then click the "Change OneCare settings" link on the left
Click the Firewall tab
Click the Firewall connection tool button
Place a check in the ActiveSync/Windows Mobile Device Center" checkbox
Click Okay back to the main page
Hope this helps, but like Anichillus said, it could be any other firewall application blocking it...
yes! all i had to do was turn of norton for a bit and it instantly recognized my device. I was just so confused because this has never happened before and thats why i haven't thought of such an easy explanation. Thank you both for giving me your clear thoughts! lol
Another resolution idea
I had the same issue - I would plug the device in through USB into Vista Ultimate with no results other than the bing bong noise it makes on connection. Checking the device list showed the network pieces being added, but not the actual Wizard itself in the Mobile Devices section. I could not sync, it would not pair, etc, etc.
Resolution (on the Wizard):
1) Settings->Connections->USB to PC
2) Turn off "Enable advanced network functionality"
This of course will not be the resolution for everyone, but in case someone else sees this behavior, here is a list of the symptoms I saw:
1) Plugging Wizard in via USB causes Bing Bong noise
2) wmdc shows no connection
3) device manager shows no Mobile Devices section when connected
4) device manager network adapters may show mobile device services when plugged in
5) If connected in bootloader mode the device manager will show the mobile device
6) You can set up a bluetooth connection (if available on the PC) and sync properly with it
Cheers,
Shoogi
Shoogi, what an awesome first post! Worked perfect for me! Keep it up, great post and lots of help!
i have a problem that when I plug my device active sync connect it and charging starts but after a minute or so active sync disconnected and charging also stoped.
I have installed everything official > rom,radio,ipl/spl etc.
One Care made activesync almost unusable for me. I also had to reflash from THT's rom because I couldn't connect at all unless I hard reset. Makes no sense cause my husband can sync and he had the identical same rom.
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440
I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.
calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck
dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!
Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas
Well...it's from yesterday that i can't connect my pda via activesync...
i tryed everything in the M$ troubleshoot...
and now i'm out of ideas!
the cable is ok...
i don't know what to try now!
upupupupup
Any errors or anything? We don't have magic crystal ball
sorry, i'm getting too mad to write è_é
anyway...
zero errors...
the PC attempts to connect and remains in "connecting..." phase while the Kaiser is only charging
maybe the activesync is not enabled in the comm manager? give that a try
and you're right...
it shows the activesync icon with a little x...
but if i command it to sync it displays the bar for a second and then nothing happens...
now i'm on another pc...
i installed activesync here for the first time and it's doing the same as on my pc!
at this point it's kaiser's fault for sure!!!
but how do i solve this? hard-reset? i wanted another option
up again!!!!
Maybe the solve:
Start -> Settings -> Connections -> USB to PC -> Disable Advenced network functionality
Sorry for my bad English
Feka
already tryed hours ago...nothing!
i'm about to think that the only way to get results is the hard reset...
Is the USB connection active in ActiveSync on your PC?
of course it is!
well...too bad!
i'm making a full backup with spb's utility...and after i'll WIPE the device
Rareba said:
Well...it's from yesterday that i can't connect my pda via activesync...
i tryed everything in the M$ troubleshoot...
and now i'm out of ideas!
the cable is ok...
i don't know what to try now!
Click to expand...
Click to collapse
Click start, go to accesories/system tools/system restore and restore your pc to the time where it worked activesync. Once it works make a restore point.
I tryed also that!
It was only fault of the pda...after a good hard reset everything works again!
Hi all,
I am on Dutty's apr-29 rom and here is my issue..
My kaiser is connected to my work pc with activesync installed and i am unable to use internet on my device... I can update htc weather with no worries but the pie and skyfire doesn't work... the strange thing is that netfront browser works just fine so iam not sure if its a proxy issue or not???
I would like to use skyfire if possible so pls let me know what can i do to make it work.
Thanks alot
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
hi, i have the same problem...but I still using the standard ATT rom...
ajmoncrief said:
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply, I tried what you suggested but still no luck..
I honestly don't know...the fact that you are able to update the weather but not others has me stumped. Has it always behaved this way? Can you do a complete system backup using sprite and hard resest, before you restore, connect it to activesync (you do not need to configure it to sync with your device, iow just cancel the first screen) and see if you can use pie or check your email. If you can then there must be a problem with your settings somewhere, but if you cant then just use sprite for a full system restore and you should be back to where you were and maybe someone else can help.
For what its worth when I first got my tilt it would not use the internet no matter which way I tried (ota or activesync). Then it magically just started working.
hello once again,
Ok so here is the thing... i played around with it a bit more and was able to get pie to work.. but everything else still doesn't work (windows live, skyfire, etc..)
I went to connections>>advanced>>select network>> on this screen i selected "My ISP" for the top menu and "My Work Network" for the bottom menu... By making this change pie is now working but still no luck with skyfire..
Note: i do not have a data plan so MY ISP menu is empty, i usually use skyfire with wifi or when connected to my laptop at home
PS: I didn't do a hard reset because i dont think it has anything to do with rom upgrade...i have flashed my device like 47 times in last 2 months and have had the same issue with every rom i've tried including the original htc rom. Everything works jsut fine when when my device is connected to my laptop at home using activesync.
I think you would still have the problem after a hard reset. Mine has the problem now on the standard Tilt ROM. The wierd part is it didnt when I first set it up and was running the internet through cerdisp. I guess I need to look into it too, but I havent been going crazy trying to find it.
What version of activesync are you using?
Iam using Activesync 4.5..
Have you tried disabling your windows firewall?
Dumb Question
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
larcen007 said:
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
Click to expand...
Click to collapse
Well the only reason i wanna use my device and not the work pc is beacuse all the major sites like hotmail, youtube, facebook are blocked but they all work on my device using "only" netfront browser..
Cheers
Xyberz said:
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
Click to expand...
Click to collapse
Thanks Bud,
will give it a go and report back...
PS: i just noticed that windows firewall is enabled and i dont have access to disable it :-(
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
ld-runner said:
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
farhanali_ said:
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
Click to expand...
Click to collapse
yes, or you could just copy and paste my post into a file with and extension called .reg , save it and double click on it.
I can not connect my HTC TyTN II to PC. Activesync is installed on my PC, firewall and antivirus is turned off, but HTC shows "status: connecting to host" and nothing happen. I tried Activesync 4.2 and Activesync 4.5.
In my mobile I also unchecked "Enable advanced network functionality"
quizzical said:
I can not connect my HTC TyTN II to PC. Activesync is installed on my PC, firewall and antivirus is turned off, but HTC shows "status: connecting to host" and nothing happen. I tried Activesync 4.2 and Activesync 4.5.
In my mobile I also unchecked "Enable advanced network functionality"
Click to expand...
Click to collapse
you've tried using another usb cable..?
I tried 2 cables. Maybe I might to install some 3rd party applications on my PC?
quizzical said:
I tried 2 cables. Maybe I might to install some 3rd party applications on my PC?
Click to expand...
Click to collapse
try to checked advanced network functionality on your device..
Hakim Rahman said:
try to checked advanced network functionality on your device..
Click to expand...
Click to collapse
When it's checked even Device Manager can't see my phone
Nice post,
Because I have same problem.
Thanks for publish this post.
I have the same issue. Also, the phone doesn't charge when switched on. Through much hassle got bluetooth PAN internet sharing to work but for one time only.
Am now preparing to hard reset - it has helped in the past on similar occasions.
The most probable reason is that we're dealing with a windows-phone here.
It's a great and multifunctional tool and among the other functions there is a tedious one - the habit to crap/brick itself from time to time. Oh well.
Good luck!
zandhorn said:
I have the same issue. Also, the phone doesn't charge when switched on. Through much hassle got bluetooth PAN internet sharing to work but for one time only.
Am now preparing to hard reset - it has helped in the past on similar occasions.
The most probable reason is that we're dealing with a windows-phone here.
It's a great and multifunctional tool and among the other functions there is a tedious one - the habit to crap/brick itself from time to time. Oh well.
Good luck!
Click to expand...
Click to collapse
quizzical said:
When it's checked even Device Manager can't see my phone
Click to expand...
Click to collapse
you should try to uninstall and then reinstall activesync on your PC
Hakim Rahman said:
you should try to uninstall and then reinstall activesync on your PC
Click to expand...
Click to collapse
I reinstalled Activesync on PC, and made hard reset on TyTN II, but nothing has changed. PC shows HTC is connected and ready to use, but Activesync shows: "not connected" and TyTN: "Connecting to Host".
Although I installed wm5torage, and if it's activated and connected to pc my TyTN II freezes while I disconnect USB cable.
hi
hi
you solved the problem???