Accelerometer is not working in my HTC Touch Diamond - Touch Diamond, MDA Compact IV General

Hai,
I was new to this type of devices. i love to play games. My Teeter Game in HTC Diamond is not working properly. I think the Accelerometer in my device is not working. Picture in the album are not rotating.
Please help me to sort out the problem
Thanks, If anyone help me out

try looking for the G-Sensor Calibrator. you can recalibrate the sensor and see if this helps.

any update here?
have the ts resolve the issue?
im having the same problem with my htc diamond, using gsensor calibration, the vertical axis wont calibrate, teeter game, ball will roll horizontally only.
picture taken will appear upside down when transferred to pc
Is this a software issue or a hardware?
Can re-flashing the rom solve this?

have u tried an hard reset?

yes, tried the hard reset and different rom flash stll no avail

i have the same problem as taipan..in teeter, the ball only move left right only..picture in album also rotate upside down..furthermore, i cannot calibrate it using g sensor calibrator. is it hardware problem?

anyone found a reason or solution to this problem ?

Related

Help G-sensor messed up

The gsensor on my g1 has all of the sudden gone whack in all programs from papi jump to maps to bubble they are all reading weird readings all of the sudden help please how do i fix this problem
liljumpman said:
The gsensor on my g1 has all of the sudden gone whack in all programs from papi jump to maps to bubble they are all reading weird readings all of the sudden help please how do i fix this problem
Click to expand...
Click to collapse
This is a great question as I ran into the same exact problem. My issue started after I downloaded the "de Blob" game which allows you to "calibrate" the sensor based on the orientation of how you want to hold the phone during accelerometer based play. After doing so my auto rotate would turn at awkward times and I found that other games didn't respond appropriately. I tried going back and "re-calibrating" by laying the phone flat but that didn't work. What ended up working for me (as I could not find for the LIFE of me where the "calibrate" feature was in the settings) the "Bubble" app which is basically a level app that tells you if a surface is level. Once I calibrated in the Bubble app, I no longer had the issue. Needles to say I no longer use the accelerometer to play "de Blob" and have emailed him to let him know of the issue. (I haven't gotten a response) Hope this helps. I will be looking forward to other ideas on how to re-calbrate the sensor in case this happens again. I'm sure there is a easier way.
yea i tried the bubble app out and now my gsensor is not working at all no matter what direction i put it in the gsensor does not respond
Really? Sorry man. Worked for me. You may need to start from scratch by wiping your phone and reflashing your ROM
The same problem
Hi are you have some solution. My G-sensor didn't respond too.
liljumpman said:
yea i tried the bubble app out and now my gsensor is not working at all no matter what direction i put it in the gsensor does not respond
Click to expand...
Click to collapse
They recommend you to mahe "8" signs with your phone in hand (twist it in all direction) because the sensor recalibrates that way. This is othe official advice.
Calibrating with the bubble app should work too. If not - alt+w
I have got the G-Sensor.
From Recovery
backup
Alt+W - delete all
and update to CM last stable
No joke, try shaking your g1 around kind of hard, it might be stuck. Reset it again after that and see what happens, worth a shot.
may sound daft, but have you tried this solution?
http://forum.xda-developers.com/showthread.php?p=4424396&#post4424396
it is a quick fix for auto rotate issues, not a permanent solution, but it may help as auto rotate is accellerometer based, as are all the apps you're trying to use
if it works, thanks go to MikeTaylor00, not me, i'm merely a messenger
senaia said:
may sound daft, but have you tried this solution?
http://forum.xda-developers.com/showthread.php?p=4424396&#post4424396
it is a quick fix for auto rotate issues, not a permanent solution, but it may help as auto rotate is accellerometer based, as are all the apps you're trying to use
if it works, thanks go to MikeTaylor00, not me, i'm merely a messenger
Click to expand...
Click to collapse
hey senaia, is this a proven method? Thanks =)

htc diamond both camera problem blueesh &greenish shadow.

please help
brought used htc diamond and found out that its got camera problem, the problem is when you go to camera and see in view finder screen you can see
image blury like blueesh and green shadow around and when take picture then its same result, same problem with front camera as well so i think its software issue,
does any body had this problem, will rom update solve problem?
pleasse help

Problem with g-sensor

Hi to everyone,
First of all, i have to apologyze for my english, and just in case if there is another thread about this, but i haven't been able to fnd a solution or anyone with a similar problem.
I have a problem with the g-sensor of my OB, but i think it's a sw issue, as i can calibrate it with apps like gps settings (or something like that) putting the phone on a flat surface, and then i can see that it behaves normally IN THE APP. But then i go to the gallery and it automatically rotates to landscape mode, no matter how i put the phone. It detects that it is always sideways.
So i would like to know it f there is a way of calibrating the system accelerometer (not using 3rd party apps, which works for the app) and fix this problem.
Note: I have tried stock rom 2.2, 2.3 and cyanogenmod and the result is the same, so i have to disable screen rotation at least for reading properly the menus.
Any help would be appreciated.
Thank you in advance.

Calibrate accelerometer and/or gyroscope

Hi!
I am facing problems with the orientation sensors (accelerometer and/or gyroscope), because installing several applications to test them (or use games), it is clearly observable, that they are a bit off (with enough to be disturbing when required). For example, games or tests that simulate a ball, and my phone is laying on a horizontal table, the ball rolls quickly to the edge of screen. This happens as well with the built-in tests in the "service menu" of the phone, for accelerometer and gyroscope also.
Do you have any suggestions how could I calibrate these sensors globally (for every app)?
Thanks.
Info
vetko said:
Hi!
I am facing problems with the orientation sensors (accelerometer and/or gyroscope), because installing several applications to test them (or use games), it is clearly observable, that they are a bit off (with enough to be disturbing when required). For example, games or tests that simulate a ball, and my phone is laying on a horizontal table, the ball rolls quickly to the edge of screen. This happens as well with the built-in tests in the "service menu" of the phone, for accelerometer and gyroscope also.
Do you have any suggestions how could I calibrate these sensors globally (for every app)?
Thanks.
Click to expand...
Click to collapse
factory Reset ur phone and then use PC companion app to Repair Firmware...
this can wipe current data and install fresh firmware on ur device
:good:
Hi,
I have the same problem. Only the x axis of the accelerometer seems to be affected : it show a value around 1 instead of 0 while the phone is sitting flat. Y and Z display normal values.
All the software solutions I have tried have had no effect at all... It seems the built-in test reads raw data from the accelerometer. It is hard to imagine how this can be a hardware problem though...
Anyway, in my case I believe a software fix (x=x-1) would do the trick but I have no idea how to do such a thing ! Any help ?
@vekto : Have you solved the issue by any chance ?
Would anyone care to try the accelerometer tests and post their results ?
Typing *#*#7378423#*#* will get you on the service menu. The two significant tests are "accelerometer" and "gyroscope".
I'd post some screenshots myself but I'm not allowed yet...
I'm having the same problem now. It seems one axis is affected. Haven't found a way around so far. This is sad because it affects the images taken with Google Camera Sphere mode. The images are badly aligned together with glitches in between. My phone wasn't like this before.
Either a SW fault - might be able to calibrate with GPS Status & Toolbox app, for example - or a FW fault - and reflashing ROM might help (highly unlikely) - or HW fault - the sensor has moved on the board (which is a bad sign anyway, might be on the way to disconnecting itself).
I sent mine to Xperia Care and got it back with the accelerator fixed. Still unclear if it's a HW problem...
It came back with a white spot on the screen (near the power button) though... so I sent it back again
I'm also having issues with the gyroscope. Installed Bubble app to calibrate the gyro. It showed the gyro was of a couple of degrees. Unfortunately the bubble app calibration doesn't work in a game like Need for Speed. It's very difiicult to achieve good times in the game right now since I have to hold it tilted to the left to go straight ahead.
So if anyone has a fix or workaround... Please do post.
Same problem, Seems after factory reset whith wipe dalvik cache.
any solution?
02nd March 2017, my autorotate has completely stopped working, restart, safe-deposit and reset do not fix. Diagnostics show Gyroscope Light Sensor and accelerometer failed testing, 3 years of same issue, surely there must be a fix that works by now?? ( please note, " turning it off and on again " does not fix it )
Helps Please
I have the same issue. Since last week, gyro, accelerometer, light and proximity sensors stop working. I've tried reflashing stock ROM without success. I have not warranty (almost 3 years old), so I even try to disassemble , disconnect an reconnect every flex (I don't know exactly were the sensors are located on the board). After that I get almost 8 hours of fully functionally sensors and then, they stop working again, so I'm almost sure it's a hardware issue.
Same problem for 3 years
I'm just now getting around to doing something about this. As my power button stopped working I can't post requested screenshot without going to the pc. I have been shopping new (fall 2018) phones after having the Z3+ since release. In my research I'm finding the phone still is better than Samsung, LG, and the pixel3 for me because the 3.5mm phone jack is mandatory for me using my device with an i-rig midi requiring both that port and the USB at the same time. I'm going to do everything I can to keep using this phone till it falls to dust. It's one of 4 Sony I've bought since the day Z1 came out of t-mo. I look forward to testing solutions. :good:
Some time after my post, I bought a new jack/proximity sensor flex and replace it. This solved the issue, but weeks later, the bottom portion of the touch screen becomes unresponsive. May be I have done something wrong... may be programmed obsolescence...
Hi I'm facing a problem of my gyroscope I don't know which one is not working a gyroscope or accelerometer. My gyroscope is so delay when I play pubg mobile and I can't also calibrate my Gsensor it always says FAIL but I put in a perfect flat surface please please please help me with this problems

[Q] XT1095 Gravity induction problem

Hi friends:
My device is XT1095,and I find a prolem about Gravity induction now:
when I launch the camera app, I found that the interface is abnormal which means that all settings and icons are rotated compared with the normal,I think the problem is the Gravity induction,and I try erase the phone and flash the system many times, they are no work.
anyone who know how to resolve the problem ?
Thank you !
Can you screen shot it? If so, it's probably a software issue. If not, probably hardware related.
I launch some ames
I launch some games rely on it.and I found that I can rotate it left or right,but cant up and down.

Categories

Resources