Database Develop

Rom Cooking

I'm quite the newbie when it comes to ROM cooking, quite lucky to have a P4350 so I can mess around a bit w/o worrying about bricking the phone. I was able to flash the t-mobile dump using this method:
xander803 said:
I'll try to detail out exactly what I did. The rom kitchen was used for every single step. The directions provided with the program are not comprehensive but done well enough that you can figure most of it out.
1). Use the extract tool and choose "dump from bin" and dump the wing os bin posted on the first page. This dumped the contents to a directory in xdump.
2). After this "pkgtool" will run to separate out the sys and oem folders.
3). Move the contents of "xdump" (which should be the sys and oem folders and maybe a couple other files) into the "kitchen" folder.
4). Place the XIP folder and Aserg's os.nb, both of which are found in this thread, into the "ROM" folder. Aserg's os.nb will have to be renamed, check for details in the rom kitchen help file.
5). This is the step where cooks can delete/add stuff but I wouldn't recommend it your first time through.
6). Run "Build" and it should automatically create your new os.nb. We don't need to do any of the conversion afterwards because we can just put this os.nb in place of Aserg's os.nb and use his method to flash.
Please read through the rom kitchen's help manual as well as Aserg's help file for flashing the herald and make sure you understand exactly what you have to do. If you don't have an unbranded Herald it may be difficult to recover from a bricked device. I bricked my device several times before getting it but luckily I have an unbranded Herald so I could just flash an official WM5 WWE back on. Lastly, do this at your own risk, this worked for me but may not work for others.
Click to expand...
Click to collapse
What I wanted to know is what I would have to do to switch the T-Mobile rom with the PdaViet rom in this process of cooking. I have tried various methods, but have had no luck right now. The ROM image I create hangs at the initial bootscreen.
Also on another note, not sure why this is but when I extract the PdaViet rom and then compile it back together using the Pro Kitchen, the new image is always a bit smaller (like I missed something.)

Question: How did you CID unlock your device?

I didn't have to CID Unlock to upgrade.

Well I found out that its normal for the rom size to shrink using the Core Pro Kitchen, this is because of Tadzio's program. What I can't seem to figure out is why I can't flash the new build of the PdaViet rom without it freezing at the first splash screen. At first I thought it was the missing .rgu files found by , but I have found out that those were taken out for a reason, so that cancels out one potential problem.

We just have to wait a little more. Anichillus is trying to creat the Kitchen for the herald as he promised it. But now after exams he is in holiday. But after that he will present a new kitchen. Just wait a little.
And yes - his kitchen compresses the files more than other.
Keep on working and cooking. The Heraldforum needs it really...
I never liked PDAViet roms - so let´s creat own ones...
Thanks

Thanks for the update, and only reason I wanted to use the PdaViet rom is cuz it has the newest build. Guess I'll just work with k0ster's release.

Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.

blackout203 said:
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
Click to expand...
Click to collapse
Be careful. When it get bricked whiel falshing there is NO chance to unbrick with Herlad RUU!!!
Believe me and don´t try it
Hope you will allways have success while flashing with Asergs Method

blackout203 said:
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
Click to expand...
Click to collapse
I thought you couldn't CID unlock the Wing.

^^imei-check. It worked so far. No other wing user has tried, I don't believe, i'm the first guinea pig.

So I just started to cook ROMs for the herald and I have to say it is a long and enduring process, but simple enough that anyone who wants to learn is able to do so.
For anyone else who is interested I am using the Core Pro Kitchen to build the roms, using this rom as my base (very clean-also good rom to load to your phone directly. Doesnt have missing files unlike PdaViet rom when running PkgTool.)
http://forum.xda-developers.com/showthread.php?t=319142
I also found a very useful selection of OEM cab packages that work with the herald for the most part. If they dont a simple edit will do the trick.
http://forum.xda-developers.com/showthread.php?t=319970&highlight=rom+kitchen+guide
Even a newb can cook up a rom using this method so there ain't no excuses.\
Cheers
So by all means all P4350 users start experimenting and cooking up ROMS so that Terra and Wing users have something to look forward to when they have an RUU.

Which version of Core Pro Kitchen are you using? The one for Hermes?

BRSG said:
Which version of Core Pro Kitchen are you using? The one for Hermes?
Click to expand...
Click to collapse
anichillus told me that the artemis version should work.
BUT write an pm to him and he will give you a link to his "Hyper Core Kitchen" the complete new one!!!!!!!!!
Give it a try

im going to try this out again and see if I can cook something up. I tried and actually created a rom be4 but was too scared to try it out. ill see if I can have a release by the end of the week but my computers been acting up. imma try to get the touchFLO working also.
neptune, post your cooked rom up or post some pics. did u do a traditional rom or one with the Touch home plugin and stuff?

http://forum.xda-developers.com/showthread.php?goto=newpost&t=323166
Would you be able to add that into your rom? It's a button free activation of the 3D Cube!

i'm currently cooking a rom using the Artemis kitchen, i'll post up how it goes, main issue for me is trying to make sure i'm putting packages in the right folder. I downloaded a .rar full of pre-mad packages so all I gotta do is drag and drop. i'm using k0ster's rom as a base but would love to use the official wm6 that was just released as a base as its newer and cleaner i'm guessing. we'll see, maybe we'll see some cooked roms from me soon!

blackout203 said:
i'm currently cooking a rom using the Artemis kitchen, i'll post up how it goes, main issue for me is trying to make sure i'm putting packages in the right folder. I downloaded a .rar full of pre-mad packages so all I gotta do is drag and drop. i'm using k0ster's rom as a base but would love to use the official wm6 that was just released as a base as its newer and cleaner i'm guessing. we'll see, maybe we'll see some cooked roms from me soon!
Click to expand...
Click to collapse
It should be better to extract the REAL WM6 rom with nbhextract and then start cooking the rom with the kitchen for Artemis (anichillus Core Kitchen??).
ANd be sure - in about one week there will be a new kitchen from him
But please use the real OS. Not a ported one!!

^Alright, i'll try that tonight. What is the major files that people remove? (Transcriber, etc.)

blackout203 said:
^Alright, i'll try that tonight. What is the major files that people remove? (Transcriber, etc.)
Click to expand...
Click to collapse
transcriber, autoupdate, sql

Thanks papamopps!
Will you please test out my rom when it is released

BETA: Extended Herald Kitchen for WM6.1

New extended Kitchen for Herald
HERALD_DEV_v2.1_Build_19199.rar
Related:
Extended Kitchen for Hermes
Extended Kitchen for Trinity
Extended Kitchen for Artemis
Thanks to misar, FreePK for helping with this new set of tools!
About the Kitchen
Herald base: HTC WWE 4.17.405.2
OS base: VF Kaiser UK 3.08.161.0 (Build 19199)
OEM Apps removed, but you need to clean up the OEMDrivers package
I did not do any changes to the OS, because it should be a clean base Kitchen for all of you
Full XIP editing supported by the Kitchen
New tool to merge all dsm files to one big file and delete all rgu's
I think the OEM package to SYS problem should be solved... but did not try it yet
How to use it
Requires Microsoft Visual C++ 2008 Redistributable Package
OEM and SYS can be used as known
The content of ROM\XIP will be used to create a new XIP section for the OS
You don’t have to worry about relocating modules... add/remove whatever you like and the new tools will take care of relocating modules or freeing RAM
.VM and .ROM is updated automatically
Actually this Kitchen runs in auto mode, which means you only need to run BuildNB.bat to create the ROM. You can change that by editing the bat files; made it this way, because I don’t use the options in BuildOS.exe
I consider this a perfect port of the new build to this device
Replaced all XIP SYS packages (I did not just changed coredll.dll to get the new build number)
There were also boot.rgu changes my MS, those have been added too
SYS is completely untouched
Read this for download:
All donations are very welcome!
I need to buy a new device, because this time my Trinity is gone forever and I cannot use my girlfriends Artemis without being killed (by mistake I deleted all contacts last time I used it for testing... she was not very happy about that )
When you are getting money for the ROMs you cook using my kitchen, I would really appreciate a donation.
I'm not talking about 50% of you incomes, but one small donation would be fair I think.
To download the Kitchen click at "All donations are very welcome"
!!! This was only meant for ppl never donated for these tools and expecting donations for ROM's created using my Kitchen !!!
Thanks to all those who have donated already!​
Happy cooking!

Come on guys - the ROM (I installed a test version by bepe) has nothing inside - real barebone...
BUT it is BOOTING
And it is what I call "click n´get" = no lack when clicking start-settings
So start cooking...
And once again: IT is a KITCHEN === NO usable ROM!!!!

which one is the herald kitchen ?

nice release bepe, and misar
quick question...anyone know which phone the 19716 build came from

loco41 said:
which one is the herald kitchen ?
Click to expand...
Click to collapse
Check the bottom of the post and read carefully

wow Bepe, great work. Downing now

Nice. Downloading now, too. My firefox decided to bloat up to 1gb of RAM randomly and then crash... so I have to sit here waiting 17 minutes for Radipshare to let me download again. >.<

neptune said:
nice release bepe, and misar
quick question...anyone know which phone the 19716 build came from
Click to expand...
Click to collapse
Forget about 19716, it is a very old build! Dont ask me about this logic.
19199 seams to be the final build, so please use this one. It's more stable, not beta like 19716, faster.

Now all I need is a way to bypass the flash center's 51.2mb limit and I'm in heaven. ;-) Awesome release. Cooking as we speak, instead of sleeping...

bepe said:
Forget about 19716, it is a very old build! Dont ask me about this logic.
19199 seams to be the final build, so please use this one. It's more stable, not beta like 19716, faster.
Click to expand...
Click to collapse
good to know
cheers

great job guys!
I'll strip it a little more, trying to get the smallest possible (working) rom for building my own one.
**********
edit: do we have to add some drivers or something? No matter what i try, the touchscreen doesn't work so i can't get past the "Tap the screen to set up your...."-screen.

mmh, adding the old drivers from 6.0 doesn't work. Am i missing a step? Can anyone confirm that it works out of the box?
Strange...

OK and Startmenu Buttons are not working,any one have the same problem.
Settings\buttons is clear, can not assiging any button.
Please advice

shafez said:
OK and Startmenu Buttons are not working,any one have the same problem.
Settings\buttons is clear, can not assiging any button.
Please advice
Click to expand...
Click to collapse
have you cooked a rom with this kitchen. because it is NOT a usable rom!!

you have to add EVERYTHING
The OEM folder is pretty empty here...
missing/you must add:
Camera
MMS
Taskmanager
AudioManager
ConnectionSetup
ev.touchflo
Dialer
CommManager
etc
etc
etc
etc
.....

you have to add EVERYTHING
The OEM folder is pretty empty here...
missing/you must add:
Camera
MMS
Taskmanager
AudioManager
ConnectionSetup
ev.touchflo
Dialer
CommManager
etc
etc
Click to expand...
Click to collapse
yeah sure... but the touchscreen should work out-of-the-box, right? Or does it need a package? Couldn't find something suitable...

stahlsau said:
yeah sure... but the touchscreen should work out-of-the-box, right? Or does it need a package? Couldn't find something suitable...
Click to expand...
Click to collapse
I'm working on a stripped version as well... For the touchscreen to work, make sure you have the touch.dll driver in your OEMDRIVERS or a TOUCH package with the needed touch.dll.

papamopps said:
have you cooked a rom with this kitchen. because it is NOT a usable rom!!
Click to expand...
Click to collapse
itje said:
you have to add EVERYTHING
The OEM folder is pretty empty here...
missing/you must add:
Camera
MMS
Taskmanager
AudioManager
ConnectionSetup
ev.touchflo
Dialer
CommManager
etc
etc
etc
etc
.....
Click to expand...
Click to collapse
Thanks, I will give it a go.
Regards

After you run buildnb.bat, and it completes successfully, what is the next step? I was looking for a OS.nb but didnt find one.
Thanks

JLine05 said:
After you run buildnb.bat, and it completes successfully, what is the next step? I was looking for a OS.nb but didnt find one.
Thanks
Click to expand...
Click to collapse
take a look in \tem\
run pagepoolchanger
run htcrt
flash the ruu_signed....
maybe

Kovsky Kitchen

This the WM6.1 Xperia ROM Kitchen by originally developed by jcespi2005 and jugglerlkr. I have adapted it to work with the Xperia! Please search XDA for the full tutorial which is pretty much the same for other phones.
http://rapidshare.com/files/166098346/KovskyKitchen.rar.html
Can someone please upload this to a premium or FTP account please? This link has a 10 download limit.
Note: XP SP2 or Vista with MS .NET Framework required to use it.
Remember to backup your phone and use HardSPL before you flash ANY rom!!
Download the BaseRom you wish to use here on XDA and extract your RUU_signed.nbh. Download the kitchen and read the included instructions to install and start cooking!
Unrar Kovsky kitchen to the root of c: so you have c:\kovskykitchen
The Kovsky ROM Kitchen has been created using the tools and knowledge of many people (not limited to those who are mentioned below)
bepe
dark simpson
itsme
jcespi2005
jugglerlkr
mamaich
pof
tadzio
theblasphemer
Enjoy & go cook!

YES, please - I support

I was gonna release mine, but you can release yours
just give credits to the makers.
The kitchen is a collaboration of many developers/chefs at xda
cheers

[email protected] said:
I started this thread because I could not see one for an Xperia rom kitchen.
I have modified a Raphael Kitchen so it will cook X1 roms. Is anyone interested? If so, I think I will have to get someone's permission to release it.
Any ideas / does anyone want the kitchen?
Click to expand...
Click to collapse
Yeah, I'd be interested in learning how to cook ROMS. How hard is it to learn how to do it? I've been a developer for many years so have a good level of technical skill.
Cheers

http://forum.xda-developers.com/showpost.php?p=2922381&postcount=12
Isn't that the same? At least that one worked for me

Kovsky Kitchen!
phenx said:
http://forum.xda-developers.com/showpost.php?p=2922381&postcount=12
Isn't that the same? At least that one worked for me
Click to expand...
Click to collapse
Pretty much the same except I have removed everything that is Raphael and replaced with X1. There is also some config updates in Dark Simpson's tool so it signs the rom properly.

Kovsky Kitchen!
itje said:
I was gonna release mine, but you can release yours
just give credits to the makers.
The kitchen is a collaboration of many developers/chefs at xda
cheers
Click to expand...
Click to collapse
Cheers itje, I will release it this weekend with credits. Everyone else, standby - just need to test it a bit more.
Anyone hoping to use the kitchen should look for the tutorials for using it as there is no point in me writing another one when there are already plenty of good ones at XDA.

Mirror here. Enjoy Zipped for better compatibility

new Mirror here: http://rapidshare.com/files/167183305/kovskykitchen.zip

change pagepool size
how do we change the pagepool size and rom date?
thanks in advance.

required to use HardSPL prior per any uprom or up radio ?

Hi,
Please could someone do a guide/tutorial for this kitchen.
I am aware that there is a guide for the Kaiser, but is this really the same?
It would be nice if there was a step by step and 'what you need' list so that people can start dumping/cooking roms for themselves.
If there already is a guide/tutorial then I apologise, could someone please link?
Thanks,
Phil Rich

philrich1 said:
Hi,
Please could someone do a guide/tutorial for this kitchen.
I am aware that there is a guide for the Kaiser, but is this really the same?
It would be nice if there was a step by step and 'what you need' list so that people can start dumping/cooking roms for themselves.
If there already is a guide/tutorial then I apologise, could someone please link?
Thanks,
Phil Rich
Click to expand...
Click to collapse
I agree, since there aren't many cooked rom's available at the moment for the X1

I'm having a huge problem with this kitchen.. well all kitchens. IMGFSFROMDUMP keeps crashing. All i do is extract a stock rom and it fails everytime. Can someone point me in the right direction?

Question
Is there any other mirror for this kitchen? The current mirror keeps failing me at 10%.
I'm not sure why though.

is it possible to re-up the ZIP please? because it is offline... thanks in advance!!

File isn't available anymore. Any other links?

someone please upload kovskykitchen.zip i wanted to backup my rom...

~Retred~ [KITCHEN|6.1 OEM|6.5 OEM|Guide] [Joshkoss Kitchen port for Rhodium]

Hey guys,
THANKS for the tools and kitchen components:
Abusalza,TPC,Zelendel,DA_G,Medkid,Phamquang,Tom_Condon,BEPE,Evirus,UDK,Olipro..
I don't have a rhodium myself but recently was contacted by two close friends that are familier with my works in kaiser, hermes, and now fuze.
Basically Long story short, They asked if it was possible for me to port my kitchen over to Rhodium.. Too which i have!!
It has taken hours and is now complete!!
It contains, SYS,XIP,and OEM from latest Rhodium. But in toolset folder you will find oemxip if you feel like upgrading to the latest 6.5
also on the next post i plan on detailing how i did this manually
trust me it was painstaking and needs to be documented.
Peace,
Josh
Rhodium Kitchen 6.1_OEM HERE 09|03|09
Rhodium Kitchen 6.5_OEM Grab it HERE 10|18|09

Rom Basics "well sorta"
To dump a OEM rom:
1: Download the oem rom.
2 Extract the ruu.nbh out of the .exe file it comes in using 7zip
3: open nbhutil.exe and extract the os.nb out of the ruu.nbh
4 drag the os.nb onto DumpTools\imgfs tools\dump_800.bat
5 drag new imgfs folder onto DumpTools\Packagebuilder.exe "this will create your basic file structure"
6 Drag os.nb.payload onto the DumpTools\Dump xip\dumpxip.bat "this will dump xip section of the rom"
7 in xip folder now drag each dsm file onto the DumpTools\Packagebuilder.exe "this will create your new xip folder structure"
8 to create your ext packages you will need to go through the newly dumped oem folder and pick packages you want and drag then onto the DumpTools\EXT_PAckages_rebuilder.exe "evirus Thanks"
Click to expand...
Click to collapse
To edit shortcuts in the rom:
1 open oem\oem_lang_0409\initflash.dat with notepad and edit paths as you want.
2 in each ext package you will find app.dat, open these with notepad and edit.
3 in oem packages you will find initflash.txt, open these with notepad and edit.
Click to expand...
Click to collapse
To create a ext package from a cab:
1 drag the target .cab file onto the DumpTools\cab2oem.exe and this will create a oem package.
2 drag the new oem package onto DumpTools\EXT_PAckages_rebuilder.exe, this will create your new ext package.
3 now you can place your new ext package in the Kitch_Rhode\ext\all\*.* for it to be in the rom.
Click to expand...
Click to collapse
To change your name on the flashing screen:
1 open Kitch_Rhodium\Tools\Rhode.htcproj in notepad and edit your rom name in.
Click to expand...
Click to collapse
How to make kitchen compatible for 6.5:
1 edit build_rom.bat
2 on this link : set OLDKERNEL=1
3 remove the 1 so it looks like this: set OLDKERNEL=
now you can use real nk.exe for 6.5
4 in toolset2 folder you will find oemxipkernal for 6.5 you will need to copy this into your rom\xip folder "delete the one in there currently" NOW you can **** a decent 6.5 rom
Click to expand...
Click to collapse
**more to come**

this one for other things.

thanks Josh i appreciate!!!!!!!!!!

good to have you here josh!

Hey Josh, good to see you on the TP2 forums! Your Hermes Roms are the best. But there are a lot of good ROM developers here too
Hope you will develop some ROMS for the TP2. You can ofcourse ask for donation to buy one there a probably many users who will support you
Regards,

Hi Joss,
Welcome to Rhodium
I'm a fun of your ROM's from Hermes to Tytn2.
I'll wait for your NEW ROM. Thanks in Advance

Heyyyy guys!! Thanks for the support.. my test rom boots! So on post 1 you will find the kitchen as promised.
I hope to begin porting 6.5 shortly and get a 6.5 kitchen up.. also i'll try and answer questions and detail more instructions on post 2.

joshkoss said:
Heyyyy guys!! Thanks for the support.. my test rom boots! So on post 1 you will find the kitchen as promised.
I hope to begin porting 6.5 shortly and get a 6.5 kitchen up.. also i'll try and answer questions and detail more instructions on post 2.
Click to expand...
Click to collapse
thanks for great work..
i want something else from you
i think must add a line if you using real nk from 6.5
can you create a second bat or a number choice with that line?

Hi Josh,
Great to see you here too. Looks like the chef's competition will be hard on the TP2.
cheers

b16b said:
thanks for great work..
i want something else from you
i think must add a line if you using real nk from 6.5
can you create a second bat or a number choice with that line?
Click to expand...
Click to collapse
to use real nk.exe for 6.5 you can edit build_rom.bat
on this link :
set OLDKERNEL=1
remove the 1 so it looks like this
set OLDKERNEL=
now you can use real nk.exe for 6.5
oltp said:
Hi Josh,
Great to see you here too. Looks like the chef's competition will be hard on the TP2.
cheers
Click to expand...
Click to collapse
heyyy man, thanks... Nice to see you here. I don't own a rhodium so i can't compete Just trying to contribute and help for rhodium peoples.

TankU buddy old pal....

ai6908 said:
TankU buddy old pal....
Click to expand...
Click to collapse
Anytime man... just happy to contribute to the scene nice to see you

Thx for the kitchen. I tried to cook a 23409 ROM, but after flashing the TP2 stops at bootscreen (the one with all the red version information)
I replaced the 409 and the OEM part with the ones from the 0407-Lang-File from here and the OEM from a dump of my german TP2.
I followed your instructions at the 2nd post here.
Does anyone have any ideas what goes wrong?
PS: maybe let the kitchen creating a logfile could be a good idea

mcfisch said:
Thx for the kitchen. I tried to cook a 23409 ROM, but after flashing the TP2 stops at bootscreen (the one with all the red version information)
I replaced the 409 and the OEM part with the ones from the 0407-Lang-File from here and the OEM from a dump of my german TP2.
I followed your instructions at the 2nd post here.
Does anyone have any ideas what goes wrong?
PS: maybe let the kitchen creating a logfile could be a good idea
Click to expand...
Click to collapse
stopped at splash screen could be missing wincles module.. or corrupt xip.. did you replace xip for that also...
for 6.5 replace oemxip in rom folder with the one in toolset2 folder then use the new msxipkernal from dag
Good idea on the log file.. i'll look into that.
edit: I'm going to create a separate 6.5 kitchen for you guys and i'll put it on post 1 for you this evening.

congrats on porting our kitchen to rhodium i know this was alot of work now i just need to buy a rhodium so i can use it lol.

twopumpchump said:
congrats on porting our kitchen to rhodium i know this was alot of work now i just need to buy a rhodium so i can use it lol.
Click to expand...
Click to collapse
hehehe, yep. loads of work... getting 6.5 done now will be up in about 40 mins.

joshkoss said:
hehehe, yep. loads of work... getting 6.5 done now will be up in about 40 mins.
Click to expand...
Click to collapse
you are amazing..
i waiting for the release...

Ok, got it working with your oemxipkernel. My own didn't work, don't know why. Now it boots, but with the start of every exe-file which does not com from MS or HTC i get a question if i really want to start it. My sdkcerts and policies from xperia seems to don't work. Will wait now for your 6.5-kitchen

msvcr71.dll
For those who are cooking under Windows 7:
If you get errors like "...msvcr71.dll is missing..." during cooking process, place the attached file into the following kitchen folders:
TOOLS
TOOLS\IMGFS
TOOLSET2

[Kitchen] Ervius Kitchen for Himalaya :) Yes, with platform rebuilder!

Yes, it came true!
Yes it use platform rebuilder!
I'm here to give you a working Ervius Kitchen, the same kitchen as you can use to cook for diamond, HD2 and others, working with himalaya Auto XIP porting, auto rebuilding, relocating!
It contains a 6.5.3 build, it does not work propetlyl, but it boots and works anyway! Something is messed with provxml only.
To build a rom:
Unpack the file
Run Erviuskitchen.exe
Click on Load ROM
Go to Tools\RomSaved and choose hima.erv
Load
Click on Create ROM
Wait a while
Flash
Enjoy
Oh, a link:
Here is new, updated link
HERE
Password is : aeroflyluby

Nice one aeroflyluby.

thank
thank aeroflyluby

aeroflyluby said:
Yes, it came true!
Yes it use platform rebuilder!
I'm here to give you a working Ervius Kitchen, the same kitchen as you can use to cook for diamond, HD2 and others, working with himalaya Auto XIP porting, auto rebuilding, relocating!
It contains a 6.5.3 build, it does not work propetlyl, but it boots and works anyway! Something is messed with provxml only.
To build a rom:
Unpack the file
Run Erviuskitchen.exe
Click on Load ROM
Go to Tools\RomSaved and choose hima.erv
Load
Click on Create ROM
Wait a while
Flash
Enjoy
Oh, a link:
HERE WE GO! HISTORY BEGINS HERE
Click to expand...
Click to collapse
link download:eror

Good Work Aeroflyluby

No working link ?!?!
But, sounds fine!

muckelmaus said:
No working link ?!?!
But, sounds fine!
Click to expand...
Click to collapse
I uploaded it well but it got deleted, don't know why, I'm uploading now, I will port new link in 40 minutes.

Here is new link
HERE
Password is : aeroflyluby

I got it, I got it !!! (Sing a happy song) So much to do - no time to cook. I like it better this way:
So much work - It's time to go paragliding or white water kayaking!

muckelmaus said:
I got it, I got it !!! (Sing a happy song) So much to do - no time to cook. I like it better this way:
So much work - It's time to go paragliding or white water kayaking!
Click to expand...
Click to collapse
Yes! We can run around in circles waveing our hands and singing YMCA (as I did when it got booted).

aeroflyluby said:
Yes! We can run around in circles waveing our hands and singing YMCA (as I did when it got booted).
Click to expand...
Click to collapse
I like this imagination!

thank you
thank you thank you

VK Kitchen
Well aeroflyluby What can I say Your a MEGA STAR man Thank you very much
best regards
swampy395

screenshots to rom build 23541 created out of this kitchen with changes made to welcomehead, wallpaper and startmenu rows
thank you luby for this kitchen

To Aeroflyluby & other Rom Masters
Please can you post detailed Guide for Noobs who are new in rom cooking like me.
how to get new xip & sys ported to this kitchen and get new builds for our hima
Thanking You

doomboyu said:
Please can you post detailed Guide for Noobs who are new in rom cooking like me.
how to get new xip & sys ported to this kitchen and get new builds for our hima
Thanking You
Click to expand...
Click to collapse
Hi mate
this will not port the xip, it this time.
Add my xip kitchen and it will work fine

Thank Swampy
@Aeroflyluby
can you try finding out how to integrate himalaya in this visual kitchen if its possible? because himalaya is not added in the list of devices
http://forum.xda-developers.com/showthread.php?t=628948
OSvisual kitchen

VK kitchen
hi doomboyu
one of the problems is the "imgfs_raw_data.bin" we need to find a way to convert it to "OS.NB.Payload" this will not be easy, and also the Hima XIP start address is not supported by "platformrebuilder" or "implantxip" it's nice to be able to use VK layout and the ease of makeing packages i'v been trying to use it on 6.1 builds but it's not working for 6.1 build's
But it did work on BlueAngel 6.5 builds
regards
swampy395

Swampy
thanks for replying me. i want to ask you which kitchen you use for cooking 6.5.3 builds for himalaya and do you intend to post tutorial for noobs like me

osKichen should work. I didn't dumped my rom in ervius, I built it manually (yea hard manual work).
Xip porting is ON THE WAY )
As blueangel history have been written some time ago, as we are writing Himalaya history right now, right here.