okay. so today I upgraded to wm6.1 on my Att tilt after the upgrade i could not open any of files saved to the storage card. The error message "There is no application associated with (file name). Run the application first, then open this file from within the application" comes up on all the files i try to open that were saved on my storage card. the icons have a lock at the corner and they all end in " 38201faf". all of my files saved on the storage card look like that. anyone have any ideas? if i need to clarify anything please let me know.
What happens if you put the card into a computer?
Did you forget to remove your storage card before upgrading to 6.1? The instructions clearly state to remove your storage card or you will lose all files on it.
dalavar said:
Did you forget to remove your storage card before upgrading to 6.1? The instructions clearly state to remove your storage card or you will lose all files on it.
Click to expand...
Click to collapse
Not true,
What about if you are flashing a ROM via the SD Card? How do you remove it then?
Edit:
To the OP, I'd go with what Chum suggests, what happens when you try and read it from your PC using a Card Reader?
Dave
DaveShaw said:
Not true,
What about if you are flashing a ROM via the SD Card? How do you remove it then?
Edit:
To the OP, I'd go with what Chum suggests, what happens when you try and read it from your PC using a Card Reader?
Dave
Click to expand...
Click to collapse
No offense but flashing from SD isn't all that easy and if the OP didn't already try and read it from his PC I doubt he did an SD flash.
Related
Hey so I am flashing my friends phone and I did all the steps to flash from internal memory but it wont go it just goes thru a couple screens in bootloader mode then just goes back to the main screen with cmonex on it... is there a format that the memory needs to be in? I tried to format it into fat32... but still no luck! PLEASE HELP!!!!
Did you make sure to unlock the security (Hard-SPL)
motocrossyz85 said:
Hey so I am flashing my friends phone and I did all the steps to flash from internal memory but it wont go it just goes thru a couple screens in bootloader mode then just goes back to the main screen with cmonex on it... is there a format that the memory needs to be in? I tried to format it into fat32... but still no luck! PLEASE HELP!!!!
Click to expand...
Click to collapse
the card def has to be FAT32. be sure you have it named properly. DIAMIMG.nbh & that its in the root of the sd card. also you may want to try a 2gb or smaller card if perhaps you are trying this on a 8gb or 16gb card. GL
make sure to unlock the phones security and that the file is put in the root of the card and name correctly.
drdrewdown said:
the card def has to be FAT32. be sure you have it named properly. DIAMIMG.nbh & that its in the root of the sd card. also you may want to try a 2gb or smaller card if perhaps you are trying this on a 8gb or 16gb card. GL
Click to expand...
Click to collapse
You may be confusing the OP, as the Diamond does not have an external card slot. 4 gb internal only. Is the phone Unlocked, as it sounds like it may not be??
Phone must be unlocked... ROM file must be placed on the ROOT of the internal storage... ROM image MUST be named "DIAMIMG", do not bother adding ".nbh" to the file name, or it will mess up the file.... the file extension is already an nbh and may not show that in the phone's file explorer.
If you're doing all of that, and the ROM is a Diamond specific ROM and not a Touch Pro ROM, it should be fine.
awesomeindeed said:
Phone must be unlocked... ROM file must be placed on the ROOT of the internal storage... ROM image MUST be named "DIAMIMG", do not bother adding ".nbh" to the file name, or it will mess up the file.... the file extension is already an nbh and may not show that in the phone's file explorer.
If you're doing all of that, and the ROM is a Diamond specific ROM and not a Touch Pro ROM, it should be fine.
Click to expand...
Click to collapse
enable "view file extensions" in windows explorer to be sure
well my sdcard is unable to read it says its damaged on the g1 but when i insert the memory stick into a sidekick 08 it reads everything all pics and videos are there, but cant get it to mount/ read sdcard from pc
i really dont want to format my memory stick any help?
You may have to. I had this happen to me last week just copy your card, reformart, Re do your ext and reinstall your apps. . No biggie.
AndroidFiend said:
well my sdcard is unable to read it says its damaged on the g1 but when i insert the memory stick into a sidekick 08 it reads everything all pics and videos are there, but cant get it to mount/ read sdcard from pc
i really dont want to format my memory stick any help?
Click to expand...
Click to collapse
why not reformat your card. it should be easy. just back up your files on the computer. format. then reload your files back on.
brian_v3ntura said:
why not reformat your card. it should be easy. just back up your files on the computer. format. then reload your files back on.
Click to expand...
Click to collapse
dan0zone said:
You may have to. I had this happen to me last week just copy your card, reformart, Re do your ext and reinstall your apps. . No biggie.
Click to expand...
Click to collapse
i cant access the card on my computer it doesnt let me at all since its having problem reading the sd both on g1 & sidekick even though the sidekick is the 1 able to read it
Hi,
Had been running throught the internet but can't find an answer. I have GenYBoot installed and Android 2.2.1 running from Internal storage of my HTC Touch Diamond. I have a problem with SD-card in Android which ... does not exist. If I want to save something it says that there is no SD-card - please insert the card. Device desen't see any additional storage than own memory (<200MB). There is no need to say it's anoying as it doesn't allow me even to download ringtones....
Could you advise please?
Thanks,
Andrew.
Solution
Just a simple trick
I don know what rom ur using, but i had da same prob
Jus delete every single file in the 4gb storage first, then put ur android files fresh ther and start the haret file from file explorer. This should do da trick, it did it for me.
andzia63 said:
Hi,
Had been running throught the internet but can't find an answer. I have GenYBoot installed and Android 2.2.1 running from Internal storage of my HTC Touch Diamond. I have a problem with SD-card in Android which ... does not exist. If I want to save something it says that there is no SD-card - please insert the card. Device desen't see any additional storage than own memory (<200MB). There is no need to say it's anoying as it doesn't allow me even to download ringtones....
Could you advise please?
Thanks,
Andrew.
Click to expand...
Click to collapse
just format your card in FTA32,,, it does work in my phone
Howro format the SD card to FTA32?
itrifler said:
Howro format the SD card to FTA32?
Click to expand...
Click to collapse
Alright first download this HP FORMAT TOOL
http://www.pcworld.com/downloads/file/fid,64963-order,4/description.html
second, copy all the contents from your INTERNAL SD only card onto your desktop
third, run the tool and choose between quick format [works for me all the time] or full format. Once done re-copy all your files back on the INTERNAL
Basically, what the title says.
There are a lot of data recovery applications if you search Google for "data recovery sd card". Not sure how well any work and someone may have recommendations but definitely don't write anything else to it
[dpeeps74]
Try Recuva using a deep scan to try to recover any files you can. No guarantees.
You can recover data from sd card with card recovery software, see this solution: sd card data recovery
helped me last time.
jasonmaloney said:
Try Recuva using a deep scan to try to recover any files you can. No guarantees.
Click to expand...
Click to collapse
Though recuva is very good in retreiving files from fromatted media, it is not the answer to his question.
His question was: Is there a way to UN-FORMAT a microsd card.
Recuva scans the formatted card, finds files and asks for a place on your PC to place the found and restored files in. Recuva does this job very well. BUT one thing recuva does not do is: Restoring the Root-tree.... And that suuuucks badly because you now have a map whit 100.000 files in it. Some sub-maps filled with files but you are not able to rebuild the tree to place it back to the SD memorycard.
So therefor i think the O.P. asked if there is a way to UN-FORMAT a microSD card...
And the question is still unanswered.
(Yes i can google, so that is not the answer where we are waiting for.....)
Salem
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
artdze said:
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
Click to expand...
Click to collapse
I only get this message once I insert the microsd card into the tablet, I get the option not now or go to my files, and I always press not now, and it never come up again until I take out the card and re insert.
do you keep taking out the card or does the message just comes up without you removing/insert the card.
artdze said:
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
Click to expand...
Click to collapse
Backup all your data from sd card and format the card from settings/storage
Probably a card on its way out.
Hello ...
kms108 said:
I only get this message once I insert the microsd card into the tablet, I get the option not now or go to my files, and I always press not now, and it never come up again until I take out the card and re insert.
do you keep taking out the card or does the message just comes up without you removing/insert the card.
Click to expand...
Click to collapse
thank you guys for your quick reply. Apologize for the insufficient info. Okay, initially when I inserted the card, the tab is in off mode. Once I powered it up, I didn't get that message. I straight away go to my files and the sd card content is already there, so I thought that is normal, but after a while that message cames on. It goes off once you touch anywhere on the screen or the soft keys. This thing happened on and on. the only thing I haven't done is formatting the card. I gonna try that method afterwards. wish me luck...>_<
artdze said:
thank you guys for your quick reply. Apologize for the insufficient info. Okay, initially when I inserted the card, the tab is in off mode. Once I powered it up, I didn't get that message. I straight away go to my files and the sd card content is already there, so I thought that is normal, but after a while that message cames on. It goes off once you touch anywhere on the screen or the soft keys. This thing happened on and on. the only thing I haven't done is formatting the card. I gonna try that method afterwards. wish me luck...>_<
Click to expand...
Click to collapse
It is always best to go through the procedures when insert or removing the sd card, use the menu and unmounts the SD card then format, it's best not to continuous taking out the SD card, even though you can do that.
hmm.... I believe I have tried doing all the method mention before. no joy... formatting process unable to complete(using onboard programme), its only done half way before that message appear again....tried several times....still the same....can't format using PC(ahh....couldn't find my card reader)..so I've concluded that I have to change a new card...even though previously all the content inside works flawlessly. anyway....thanks all for the advices given.
I had that problem with an old microSD and my T810. Changing it with a new one (faster and best branded) solved the problem.
No more messages.
artdze said:
hmm.... I believe I have tried doing all the method mention before. no joy... formatting process unable to complete(using onboard programme), its only done half way before that message appear again....tried several times....still the same....can't format using PC(ahh....couldn't find my card reader)..so I've concluded that I have to change a new card...even though previously all the content inside works flawlessly. anyway....thanks all for the advices given.
Click to expand...
Click to collapse
There are two more method you can try, download the Panasonic SD formatter and use that program to format the SD card, or you can format the card using a old nokia phone that runs on the old S40 OS.
artdze said:
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
Click to expand...
Click to collapse
I had a 16gb sandisk do this on my s2, swapped it yesterday for a newer, faster 64gb card and so far so good. I'd try a different card or buy a new one.
kms108 said:
There are two more method you can try, download the Panasonic SD formatter and use that program to format the SD card, or you can format the card using a old nokia phone that runs on the old S40 OS.
Click to expand...
Click to collapse
wow... I wanna give this method a try, looks very promising....
I can't guarantee that the SD formatter work,but it's. A very good program made by the SD association, but the Nokia one has a good chance, previously I has some dead micros, and some that will not detect, even on a PC, the nokia fixed it.