Hi all,
Is there a way to set the keyboard backlight permanent on, when it is charging?
I have try advanced config, but there i only can change the timeout. No difference if chargin or not.
Thanks for your help
Best regards Voshi
Are you sure you dont have a touch pro?
Shaady said:
Are you sure you dont have a touch pro?
Click to expand...
Click to collapse
umm... what?
sorry for missunderstanding i mean the "keyboard" from Diamond of course. I want to set the 4 hardwarekeys (home - back - hang up - hang on) permanent on when the diamond is in the carholder. the backlight for this keys are only on (for 10 sec by default) if you touch the sensor. sorry for my poor english, hope you know what i mean
Thanks yoshi
he wanted to say that there is no keyboard on the diamond device so that you can adjust the keyboard backlight.
at least - my diamond does also not have a keyboard
if you want to adjust the keyboard backlight, you have to buy yourself a diamond pro
Shaady said:
Are you sure you dont have a touch pro?
Click to expand...
Click to collapse
mugglesquop said:
umm... what?
Click to expand...
Click to collapse
He means which version of the Diamond do you use?? the one with a qwerty keyboard or the one without??
as all you can see in my signatur i have a Touch Diamond. I also write this post into the Diamond section! hope now its clear. The question is still the same. How can i set the 4 hardwarekeys to permanent backlight when the diamond is in the carholder.
\\Yoshi
i understood what he meant, just not the second post lol
i have never read about a solution for this, seen a couple of other posts asking.
Hope i am proved wrong
Allright man...sorry for my delayed reaction.....I wasn't the only one on this topic...lol
I don't have a solution either...I know when you slightly touch the center button, it will glow up and then go off in about 20 seconds...I'm wondering IF it would be possible anyhow....
i see.
we were confused as "keyboard backlight" is different to "hardwarekey backlight"
but here you go:
change HKCU\ControlPanel\Backlight\QKeyLedTimeout to a higher value.
the value represents seconds.
haven't tried it myself. please post back if it works
yes the reg key is working, but iam looking for a solution only if the touch diamond is in the cradle.
\\yoshi
Maybe possible if you use Phoneweaver to create a "power" profile (which is activated when u plug in power or sync) to run a Mortscript file that writes to the registry.
In your script file (open a text file and save it as .mscr), you just need this line:
RegWriteDWord ("HKCU", "ControlPanel\Backlight", "QKeyLedTimeout", no_of_seconds)
Another script file to make it back to default value once you disconnect from plug or sync:
RegWriteDWord ("HKCU", "ControlPanel\Backlight", "QKeyLedTimeout", 10)
Hi all,
I found a interestistin post http://forum.xda-developers.com/showthread.php?t=440305
where i can use mortscript if the diamond is handsfree connected.
so how can i send a "touch sensor" command?
\\Yoshi
Related
Hello,
how can I do it? With Advanced Config I can change the time the keyboard remains on after the last key press. But I want to deactivate this backlight.
Thank you!
Try to set the time to 0.
The lowest value is 1 second.
Just out of curiousity...why do you want to do this?
The backlight makes me nervous
Brevi said:
Just out of curiousity...why do you want to do this?
Click to expand...
Click to collapse
my question is, for what keyboard you wanna do this as the diamond has no hardware keyboard with backlight...
MasterOfDesasters said:
my question is, for what keyboard you wanna do this as the diamond has no hardware keyboard with backlight...
Click to expand...
Click to collapse
The diamond has 5 buttons. For these buttons.
Hello guys,
for the last 20' i am searching the forum but i cant find an answer.
Is there a tweak for the diamond to be able to write in landscape? The landscape mode of other phones is sooooo nice, that it is for me a major factor in selecting the phone i am going to purchase. Makes the SMS life so much easier...
Download GSen from the sticky thread at the top of the forum. Then you can just turn the phone sideways to switch any app into landscape mode.
Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
After this, you can map the long press key to <Rotate>.....I go into sms, press the answer button for a sec...everything goes into landscape....exiting the program takes me back to portrait on the today screen. My only gripe is that it rotates only clockwise. I would rather it rotate the other way but it works.
Your other option is to try Gsen and use the G Sensor to rotate the screen. I have not tried it yet as I have read that some have experienced bugs.
http://forum.xda-developers.com/showthread.php?t=403939
I must say though that texting using the WM6.1 qwerty keyboard isn't too hard. I dont have fat fingers though.
njpollard said:
Download GSen from the sticky thread at the top of the forum. Then you can just turn the phone sideways to switch any app into landscape mode.
Click to expand...
Click to collapse
yup just what i was gonna say, and it works well, i believe you can also manually rotate the screen in the options menu (there is a tweak for this listed in the tweaks thread i think) but i just use GSEN since it lets you rotate any app just by tilting the phone
Help
eskasi said:
Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
Ok in my zeal to change the registry..I am not use to this keyboard on board and I change the registry right below this GDI-rotation-hideorientationUI...what was the name and value right below this? I can't believe I did that.
Click to expand...
Click to collapse
I'm about to ask the same question.
Gsen is a nice application. But I only want landscape when messaging. Is there a better way to activate the rotation when I;m messaging and deactivate when I exit messaging.
remove all other values in the gsen config and keep the one for sms.
heartex said:
eskasi said:
Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
Ok in my zeal to change the registry..I am not use to this keyboard on board and I change the registry right below this GDI-rotation-hideorientationUI...what was the name and value right below this? I can't believe I did that.
Click to expand...
Click to collapse
If you mean LandscapeFixed, which is what is below it on mine the value should be 1.
Click to expand...
Click to collapse
Blazeitup123 said:
remove all other values in the gsen config and keep the one for sms.
Click to expand...
Click to collapse
Hello bro, your instruction is clear. But for a beginner like me, I do not know what is the .exe file to include in the gsenconfig (file name in WM6 for messaging application)
eskasi said:
Enable Manual Screen Rotation (Portrait/Landscape): HKLM - System - GDI - Rotation - HideOrientationUI (change from 1 to 0)
After this, you can map the long press key to <Rotate>.....I go into sms, press the answer button for a sec...everything goes into landscape....exiting the program takes me back to portrait on the today screen. My only gripe is that it rotates only clockwise. I would rather it rotate the other way but it works.
Your other option is to try Gsen and use the G Sensor to rotate the screen. I have not tried it yet as I have read that some have experienced bugs.
http://forum.xda-developers.com/showthread.php?t=403939
I must say though that texting using the WM6.1 qwerty keyboard isn't too hard. I dont have fat fingers though.
Click to expand...
Click to collapse
I changed the registry key, double checked to be sure...but I can not set the long key to rotate...option is not there...this is on a Sprint Diamond
rollrsk8ter said:
I changed the registry key, double checked to be sure...but I can not set the long key to rotate...option is not there...this is on a Sprint Diamond
Click to expand...
Click to collapse
i have the sprint diamond and i got it to work, i set the long key by going :
start > settings > buttons > now where is says "2. assign a program" you need to scroll all the way up the list to find "<Rotate Screen>"
its like this because the list is in alphabetical order and characters come before letters.
hope this helped!
You want this:
All you need is Gsen
Sergio PC said:
You want this:
All you need is Gsen
Click to expand...
Click to collapse
How come Gsen works with my "Programs" but nothing else.. it wont rotate in texts or nething else.. wtf.
Gsen hasn't been updated in an eternity.
I recommend Brins0net_Gyrator:
http://forum.xda-developers.com/showthread.php?t=427805
Still in very much active development and in a much more usable and configurable state than Gsen.
Best regards,
Adam R. Hirshfield
T-Mobile (UK) Ltd.
Core Networks
ahirshfield said:
Gsen hasn't been updated in an eternity.
I recommend Brins0net_Gyrator:
http://forum.xda-developers.com/showthread.php?t=427805
Still in very much active development and in a much more usable and configurable state than Gsen.
Best regards,
Adam R. Hirshfield
T-Mobile (UK) Ltd.
Core Networks
Click to expand...
Click to collapse
i concur. Gyrator is the way to go! gsen is old balls.
Blazeitup123 said:
i concur. Gyrator is the way to go! gsen is old balls.
Click to expand...
Click to collapse
Looks good Ill give it a try.
gyrator does not work for the us versions, sprint/unlocked gsm but it will once version 2 is released in about a week according to the author of it
DomSim said:
gyrator does not work for the us versions, sprint/unlocked gsm but it will once version 2 is released in about a week according to the author of it
Click to expand...
Click to collapse
Sweet thanks for the info
after reading this thread i'm still confused. I have gyrator but that rotates everything. If I want only the messaging to rotate, can someone please post those instructions.
I dunno if I'm only one who has this problem but when I'm occasionally on sun I can't see nothing on my Kaiser and it's really difficult to setup backlight brightness on touchscreen which u can't see.... So I've been looking alot if there is some utility which I can link with button or gesture and I haven't found anything... So I've wrote my own utility. Feel free to use it as well if u find it useful -> http://lobster.ic.cz/?page=bl
is this useful or is there easier way to do that??
Been searching for an app like this for a week.
Works great!
Thanks.
Here's another program that gives you a today plug in for it:
http://forum.xda-developers.com/showthread.php?t=412896
I'll b trying yours tho as I like the idea of UL with icons for up and down
Cheers,
Matthew
I made a cab with this program mapped to the PTT button. I have a AT&T Tilt, Im not sure if your phone has a PTT button or if its called something else or whatever.
With this, just run the cab then I tap the button and it changed the brightness really quickly, no menu or anything, I love it! If I walk out into the sun I just tap the button 3 times and my screen is bright.
Lobsterii, I love this program thanks a ton!
I'm glad that I could helped u out guys... actually there might be more funny stuff possible only if HTC release some documentation on theirs DLL files cos it's pain to guess arguments...
you did it all by guessing? I figured you would have decompiled the dll.
Truly excellent! I have also been looking for something like this for a long time.
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Thanks again for a useful app!
you did it all by guessing? I figured you would have decompiled the dll.
Click to expand...
Click to collapse
I've read some forum where someone pointed out that backlight function should be in some dll by HTC dunno where it was... Then I was googling "dll find export function" and I've found prog "DLL Export Viewer" which can show function names in dll. Unfortunatelly there is generally impossible to find out how many/what arguments the function has. So I've found function name like HTCUtilSetOnBatteryBrightnessLevel and I've simply try prototype int HTCUtilSetOnBatteryBrightnessLevel(int); but it crashed... so I keep going like int HTCUtilSetOnBatteryBrightnessLevel(int*); and it worked... voila...
pudifoot said:
Truly excellent! I have also been looking for something like this for a long time.
Click to expand...
Click to collapse
thx alot...
I figured I might as well kick off the feature requests that always follow a new release: How about the option set both battery and power brightness with one command? Perhaps by a special switch, or by only specifying the brightness level (i.e. no 'b' or 'p' switch)? Or is there a way to do it already?
Click to expand...
Click to collapse
done. + it's now compiled as an release version so it actually has 50KB less than old version... enjoy it's at the same place instead original files http://www.lobster.3web.cz/bordel/bl/index.htm...
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Thanks for implementing the feature I was looking for. A perfect application - it's small and fast, and it gets the job done with excellence.
Thank you. Works perfectly.
silentanvil said:
Nice improvements! how about another a switch so that it will toggle between brightest to dimmest? So if this was used it would just go between 1 or 10 and none in between.
Click to expand...
Click to collapse
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
lobsterii said:
hmhm... what I wouldn't do for y... There is new version 02 (on my web at the same place) where u can setup your own sequence. Length of sequence might be from 1 to 10... values are as usual from 0 to 9... But numbers must not repeat (known feature I don't see point to solve it) so u can set something like "bl02.exe 0 5 1 9 3" or whatever else... enjoy
Report any found bugs... I mean it's super simple but it's 4 am so I'm half sleeping...
Click to expand...
Click to collapse
Awesome! Thanks so much! I've also been looking everywhere for something like this!
Awesome!
Well done! I've been looking for ages for something to do this.
How to use bl02...
Something from lobsterii that helped me:
create link in Total commander (file manager) I think its in options "File -> >>>>> -> Create shortcut" then I have another file bl02.lnk then I open properties of the lnk file, I click tab shortcut and put the text of path into "" and after it I wrote parameters so it looks like
"\Program files\bl\bl02.exe" 1 3 9
OK dumb question and first time posting so don't slaughter me. If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct? Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display? If you get far enough to open the utility then its not that hard to move the brightness up. Sorry for the dumbness of the question.
volleykinginnc said:
If I understand the thread correctly this will put large buttons to adjust from the Backlight screen....correct?
Click to expand...
Click to collapse
my bl02.exe doesn't put any button anywhere... it's just app which actually toggle brightness. U can try to run it via file explorer it should change brightness...
volleykinginnc said:
Is there a program (other than the PTT button which I'm using) that will allow a button or swipe to adjust the brightness without having to open the brightness display?
Click to expand...
Click to collapse
There is plenty of programs to map this app to buttons, finger swipes and some other crazy stuff like voice commands etc.. For example I'm using FTouchFlo (u can use FTouchSl which is easier to configure) and map backlight change for finger swipes... Most easy way is just copy blXX.exe to /Windows/Start Menu/Programs/blxx.exe and then go to Start->Settings->(tab)Personal->Buttons and link it with some buton...
I'm just now at work so have no time for more explanation... but Once I get home I'll create some FAQ at download page cos... cos it'll be easier for all of us
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
volleykinginnc said:
dont sweat it that was a perfect explanation and I now have it helped me to get it running to a button.
One other quick question though....I have S2U2. So the button doesn't work until I have unlocked it (which sometimes is hard to see going out to daylight) is there any way (easy way, Im no programmer)to allow the button to work (that is brighten the display via the button I have it mapped to) while it is still locked?
Click to expand...
Click to collapse
I'm sure he won't be able to bypass A_C's S2U2, but (assuming you have a Kaiser, you didn't say) if you enable dpad in S2U2 you can always hold your right dpad button to make sure S2U2 is unlocked, even if you can't see the screen, and then hit the button for the "bl02.exe 9" link.
Ha ha...you guys are awesome! Right Dpad enabled and now it works like a charm even in the brightest sun!! Thanks for the great application...makes a big difference in usability.
Some of you experts ought to make a list of these application gems (this program/kaeser tweaks etc) to make it easy for the noobs like me. This is good stuff!!
hi people! i have installed on my diamond this app: pocket informant... the latest version...
i was exploring the program, and i found there was an option to turn the program in full screen...
the problem is now i can't turn off that option, and pocket informant is always in fullscreen mode, and it's impossibe to access to the menus, editing what we want, exit the program... is real annoying....
does anyone know how to disable that option??
thanks!!!
I have no solution for you how to disable this option.
To turn off fullscreen again, you have to change the registry key:
[HKEY_CURRENT_USER\Software\WebIS\PocketInformant]
"FullScreen"=dword:00000000
Be sure to quit PI before changing the registry key.
You should be able to press a hard key on the phone and it will take it out of full screen.
callmemoe said:
You should be able to press a hard key on the phone and it will take it out of full screen.
Click to expand...
Click to collapse
Does not work for the diamond.
Doktor [email protected] said:
I have no solution for you how to disable this option.
To turn off fullscreen again, you have to change the registry key:
[HKEY_CURRENT_USER\Software\WebIS\PocketInformant]
"FullScreen"=dword:00000000
Be sure to quit PI before changing the registry key.
Click to expand...
Click to collapse
sorry for asking you that, but how can i change the registry? i never did that, and i really don't know how to do it... do i need to have some program for it??
thatks!! and by the way, do you know if the version 8.5 fixes this problem, witch is really annoying??
Had the same problem. Contacted WebIs and got the following reply
If you do have an issue where its not coming out of full screen mode when it should, then you can fire up a reg editor and go to HKEY_CURRENT_USER\Software\WebIS\PocketInformant and delete "FullScreen".
Doktor [email protected] said:
Does not work for the diamond.
Click to expand...
Click to collapse
It does actually; mapping Button 1(hold) to something (usually left soft key)will drop PI out of full screen mode as advertised.
I've got mine mapped to Comm Manager; if PI has focus in full screen it will drop out of full screen and retain focus, if not in full screen Comm Manager launches
allenf said:
It does actually; mapping Button 1(hold) to something (usually left soft key)will drop PI out of full screen mode as advertised.
I've got mine mapped to Comm Manager; if PI has focus in full screen it will drop out of full screen and retain focus, if not in full screen Comm Manager launches
Click to expand...
Click to collapse
i'm here trying to map the buttoms, but i don't understand how to do it...
can you explain me please??
thanks!
Start|Settings|Buttons| 1) highlight the bottom option "Button 1(hold) and 2) select action from the drop down menu...option <Left Softkey> is the recommended but Comm Manager works for me as "dual use".
Button 1, of course, the Call Answer (Send) key...
Had the same problem with my HD2. The registry edit worked like a charm - I just changed the value in Fullscreen from 1 to 0.
Very nice fix.
hi,
i want to ask if theres a ".cab" or installer which makes my diamond supporting landscape?
so that i can use this kind of action screen like on touchpro. and writing sms in landscape mode.
thx , domi
domi144 said:
hi,
i want to ask if theres a ".cab" or installer which makes my diamond supporting landscape?
so that i can use this kind of action screen like on touchpro. and writing sms in landscape mode.
thx , domi
Click to expand...
Click to collapse
changescreen should be fine. for further settigns pm me
HKEY_LOCAL_MACHINE\System\GDI\Rotation
HideOrientationUI from 1 to 0
then START - settings - Buttons
And then if you hold call button then your screnn rotate.
gyrator 2 is also a very good program but it is not able to turn the touchflo userinterface but everything other it rotates with ease (including textmessaging etc.)
i cant really seem to either understand or find this directory "HKEY_LOCAL_MACHINE\System\GDI\Rotation" ? is there a possible cahnce that you could specify it a little more so that even i understand? HKEY_LOCAL_MACHINE\System\GDI\Rotation
Hojlind said:
i cant really seem to either understand or find this directory "HKEY_LOCAL_MACHINE\System\GDI\Rotation" ? is there a possible cahnce that you could specify it a little more so that even i understand? HKEY_LOCAL_MACHINE\System\GDI\Rotation
Click to expand...
Click to collapse
It is not a directory, you have to edit registry with registry editor program "REGEDIT" or some else.
If you are in registry (HKEY_LOCAL_MACHINE\System\GDI\Rotation) then you have to change key "HideOrientationUI" from 1 to 0.
domi144 said:
hi,
i can use this kind of action screen like on touchpro.
Click to expand...
Click to collapse
To get the action screen you have to install touchflo3d from touch pro. Of course you have to enable rotation like other posters said.
hmk thx i'll try
riki1 said:
It is not a directory, you have to edit registry with registry editor program "REGEDIT" or some else.
If you are in registry (HKEY_LOCAL_MACHINE\System\GDI\Rotation) then you have to change key "HideOrientationUI" from 1 to 0.
Click to expand...
Click to collapse
ahh okay i think i understand that and thx but i think ill go with gyrator 2 since i aint that good at all that stuff
riki1 said:
HKEY_LOCAL_MACHINE\System\GDI\Rotation
HideOrientationUI from 1 to 0
then START - settings - Buttons
And then if you hold call button then your screnn rotate.
Click to expand...
Click to collapse
thanks mate you're a genius, i was searching for that for a time ago
thanks again