Related
Hi
I have the newest firmware version installed on my Qtek 9090 (BA_WWE_14000_147_11200_Ship), and I experience a problem again which I had first when I bought my Qtek but was gone after I had installed Radio version 1.08.00:
Once a day I have to reset my Qtek because I can't hear the one I am calling - usually this happens when I call my mobile phone's answer phone. The phone gets connected but I don't hear anything. After a soft reset everything is fine again.
Is this a known issue? Any solutions to it? Ok - I know I can downgrade to 1.08 again but I dont really wanna do that. And yes, I can stop calling my anser phone ....
Anyone knowing what is causing the problem?
Reagrds,
A
I had the same problem with my Qtek 9090 until I stopped use the Bluetooth feature completely. Since then, everything is fine.
tot 1.12 radio has solved the "no sound" issue.
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
keeping_sg said:
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
Click to expand...
Click to collapse
For me, radio 1.12 delivered:
- worse signal reception
- higher battery consumption
- still no sound issue.
flashed twice & still having the bloody "no sound" issue. really give up. i think the next thing to change is the motherboard. sigh.........................
I had never had this issues untill I upgraded my Radio to 1.12 and then I had it 5 times in one day, went back to 1.10, no more issues
Hmm. This is a really 'odd' problem. I didn't originally have this problem with my SX66. Then, it just 'popped up' one day, and I can't seem to get rid of it.
I have tried different ROM versions (currently 1.40), and my radio version is at 1.10.
I have NEVER used radio 1.12, so I know that's not the CAUSE.
We need to compile a list of people with the problem, and see exactly what combination of ROM and Radio they have, as well as the programs they have installed.
if you read the cingular forums, there are a few folks there that say they have had it all along so I am not sure where to start...
umm....... different ppl have different problem. seems like it's a integration issue.
If you go to some HK forums, you will also find a lot of people suffering from this.
To me, I seldom use it as a phone. I only use it to receive emails and website browsing. When I go overseas and I used it as a phone with a BT handsfree (shut down GPRS connection), everything is just fine. I only encountered once with no sound problem when I take away my BT handsfree on a plane....
It's definitely a bug since a long time ago with old and new versions.....
Sad....and disappointed......
Hi all,
I upgraded my phone to the 1.12 radio along with the 1.40 CE ROM and am always resetting due to the "can't hear caller" issue and I never had this problem before.
I'm going to do a hard reset and see if that helps (clear out all the apps and use it for a day or so). If this doesn't work, I shall revert back to the 1.10 as I had no problems with that.
ROM 1.40.00
Radio 1.12.00
EXT ROM 1.13.139 (with Updated CallerID [1.20] and older version of O2 Active [3.0])
This cant hear caller issue, is it cant AT ALL hear caler or caller is so faint I cant hear him.
I ask as sometimes I get calls that are faint however when the caller rings back it fine. Not sure if its crap reseption or the device.
I got O2IIs from UK and had the same "No sound" problem. I have to SR about 5 times daily to sort it out. However, if I turn off Bluetooth (pairing with my Bluetrek G2) then everything's OK.
My ROM version is 1.31.00 WWE, Radio : 1.10.00, ExtROM: 1.31.139 WWE and BT 1.0.0 Build 3500
Had up to BT 3900 but wont help. Gonna up radio to 1.12. Will post the outcome soon.
I've only experience the problem once since the imate 1.40 upgrade.
Now, I must say that I don't use the phone THAT heavily.
I upgrade to 1.40 EX, it seems working fine, still the sound quality is not good enough...
people!
A guy called Derek has posted a possible solution to this problem here! http://forum.xda-developers.com/viewtopic.php?p=118364
It involves removing the Bluetooth for the startup because he believes that even with the bluetooth off, the unit is still trying to connect to a bluetooth headset.
I'm going to remove/unpair my Bluetooth Headset and see if that makes a difference. If anyone else can try this and post results I'm sure this would help loads of people.
Dom
Please confirm this and I will post it to wiki
@xdadom,
It's correct. As I mentioned in my post, when I "turned off" Bluetooth, everything's OK. The way I "turned off" Bluetooth is exactly the same with Derek did in his post, i.e. delete "Run_BTTrayCE" from Windows\StartUp\
However, I still need Bluetooth for my hand-free device. In my opinion, it's rather a trick, not a solution to kill "No sound" problem. Anyway, we can wait the updated BT version from supplier to sort it out.
Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.
this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!
Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.
Check out my signature - use the links provided.
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol
Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?
same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:
_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.
Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself
Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me
Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.
i went from 2.19 to 2.61 but not any better. can someone forward me the link to download 2.47.11 radio rom cab file?
i tried to search but when i put in the search field 2.47.11 radio rom, 21 pages of related topics pop up and i can't find anything in terms of downloading this rom.
thanks, m3m3
http://forum.xda-developers.com/showthread.php?t=279380
xeno1 said:
http://forum.xda-developers.com/showthread.php?t=279380
Click to expand...
Click to collapse
hey xeno,
seeing that you are senior member, i have some questions for you.
how do you like 2.69 rom? here is my situation that i am running into with my 2.19 radio rom.
i cannot receive signal in my house but as soon as i walk outside, it get 4 bars but it takes awhile to recover. i tried 2.40 before but during a call, i could not switch over with call waiting and sometimes, when i call my voicemail, i could not hang up. so, i went back to 2.19. 2 days ago, i installed 2.61 but i don't get any better signal strength than 2.19. but with 2.61, i am experiencing the same problem of not being able to hangup during a call or navigating through my voicemail box. it seems as though it doesn't recognize any button inputs or touch screen inputs.
i bought a longer lasting battery for my MDA so power drain is no issue. the main issue is reception which i will trade off with battery life.
my question to you is are you happy with 2.69 with regard to reception and recovery of lost signal?
maybe i should try 2.69...can you point me to the download?
i am running SPL 2.17/IPL 2.17 on Faria's Crossbow
thanks in advance.
-Mike
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
xeno1 said:
I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
Click to expand...
Click to collapse
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
i've searched for DTMS but the search pulled up nothing under Wizard except for this thread. any ideas??
xeno1 said:
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
Click to expand...
Click to collapse
mestrini said:
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
Click to expand...
Click to collapse
Maybe it's just the .318 WM6 versions that have been having that problem then. Using any other radio versions with it other than 2.19 or 2.69 causes you to have a lot of missed calls.
m3m3, I'll have to do a little searching and see if I can find those threads for you. It's been a while since I've seen them.
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Looks like reinstalling your phone dialer pad should fix the problem. The only other solutions I came across all involved doing a hard reset.
lol...thats fine man. after i installed 2.69 radio rom, i missed a buttload of calls especially from my wife which wasn't too good. had to go back to 2.19 radio. hopefully, someone can program a good radio rom that doesn't miss calls and increases reception otherwise, I will have to migrate to the iphone and to cingular (att)....
xeno1 said:
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Click to expand...
Click to collapse
Please help!
I have a Cingular SX66 that all of a sudden the major phone functions just quit.
Wheb I dial out it appears to be dialing out, shows a connection and connect time, singal strength is good but I can not hear the person on the other end nor can they hear me talking. On incoming calls, the phone rings yet again the same problem a mute connection. (mute is off). Everything else functions properly
If anyone could please help me I would greatly appreciate it.
Phone is in its original configuration
ROM version: 1.20.10 WWE
ROM date: 10/08/04
Radio version: 1.02.10
Protocol version: 1337.35
ExtROM version: 1.20.115 WWE
Alan
try reflashing with a different ROM to see if it fixes it
I will try that, since the BA upgrade list does not show one specificto the Cingular SX66 is there one you would suggest?
Thanks Alan
this happened to me too just today.... i thought i got something broken inside so i disassembled my BA using the guide on wiki.. reheated all the ic's (insane) and then reassemble it... but nothin happens... nada..
one thing i noticed is when i reboot, sometime i see my version nmber on my radio... but sometimes i see is none..
R : none
G : none
B : 5.04.09 wwe
please help
Sometimes that happen with the BA and wm5 (r: none...). The solution is to soft reset it.
About the "can't hear" thing, did you install any new program and then the problem begun?
been investigating this.... it turned out to be a hardware fault.. my charger kind pulled out the thingie inside and i just cleaned it and do things with it..
i dont know jack about all the things inside (as you can see bout my post) but its working now have to test it again and again though...
Thanks Matthew,
I did try reflashing. 1st time with the official siemens rom upgrade and the 1.15 radio rom and it worked for a few calls then then quit so I reflashed with the 1.12 radio rom and it did the same thing - worked for a few calls and quit. It's like it goes into a mute function-cant hear ,cant talk. Yet every other function of the phone works and it shows good signal strength. The phone only has 92 incoming & 50 outgoing hours on it
Thanks for all the help from everyone , this is driving me crazy!!
I'll keep working on it
Does anyone know how/why this could have happened. Perhaps it was a coincidence that my phone broke at the time of updating....but I just have a feeling something else has happened. I updated to Dutty's Diamond ROM and HardSPL 3.29 and after that, I cannot use 3G at all. I show I am connected to the 3G network, but I cannot make/receive calls, or use the internet. If I turn off 3G, all works fine. I tried 3 or 4 radios to see if that would help, but none did. After trying many things, I decided to go back to my original setup as it worked fine before.....but I still cannot use 3G now. I get a 3 or 4 bar signal on the 3g network it shows, but I cannot make/receive calls or use the internet. I did make sure HSDPA was enabled in KaiserTweak and Advanced Config.
If anyone has any idea...I would be so grateful to hear. I am at a loss over what could have gone wrong...or if I need to send the phone in for service.
I used to run this setup before this issue:
ROM: Alex.v52.ATT.162.cube.rom
Radio: 1.27.14.09
SPL: SPL-1.0.Olipof (Kaiser-HardSPLv1)
I updated my Kaiser to the following:
ROM: Duttys_Diamond_Rom_Ruu_Signed_5.2.1588_1.65.16.25_V1.zip
Radio: 1.65.16.25
SPL: HardSPL - 3.29
after the update, I tried the following Radios to see if it would fix the 3G issue. None of them did...
1.58.25.17
1.65.20.29
Niki Radio - 1.58.11.07
Thanks for any help or suggestions!!
This might be bad info but worth a try.
1. make sure there are no proxies being used
2. make sure all the network settings are correct for your provider
3. maybe post this problem in the thread of the rom you're using.
4. Flash back to the old rom to see if it's a hardware problem.
Thanks Chumley for the quick response!!!
I just verified no proxies are being used at this time... tried with them on and off.
I did revert back from SPL3.29 to SPL-1.0.Olipof (Kaiser-HardSPLv1) and reinstalled the old ROM I was using for the past several months.
Just turned on 3G and cannot make calls or receive them. Also cannot visit any webpages.
I am thinking I have a hardware issue at this time... but curious if I did something wrong that may have caused this.
Thanks for your suggestions... I appreciate it very much.
There was a thread last week like this and at least 2 people reported having a hardware problem. The problem was almost like yours.
http://forum.xda-developers.com/showthread.php?t=396459
OMG!!!! I just helped someone without flaming them...... Something must be wrong.
Well it sounds like what I didn't want to hear. Thanks for that link!
Just wonder why it started the moment after flashing a new ROM/Radio/SPL.... seems like it is related in some way... but who knows.
I guess it was a good run with 3G data while it lasted. ha ha
If anyone knows any ballpark figure on service costs to repair a Kaiser phone, I would love to hear it. I am guessing though that it will not be worth shipping it in for service. Well maybe it will be.
No warranty?
I will have to look into the warranty. I didn't purchase anything extra...so I was sort of assuming there was a 30 - 90 day warranty which has past. Maybe it was a 1yr. Going to have to dig out the paperwork.