Sometimes when I make a call, after listening to some voice prompts it asks me to press some numbers. When I go to do that, the screen has already darkened and the dialer is not visible. If I hit another key to attempt to "wake up the screen", it goes on hold or does something else.
There's got to be a simple solution to this, but I can't figure out what it is.
Exactly my problem
I have my backlight set to go out after 5 min. Works fine in every app. except the dialer. It goes black after 10 sec.
Anyone knows a remedie ?
asolof said:
Sometimes when I make a call, after listening to some voice prompts it asks me to press some numbers. When I go to do that, the screen has already darkened and the dialer is not visible. If I hit another key to attempt to "wake up the screen", it goes on hold or does something else.
There's got to be a simple solution to this, but I can't figure out what it is.
Click to expand...
Click to collapse
Pressing the power button works for me in WM6.1. This turns the backlight back on allowing you to use the touchscreen again.
agree with the post #3 and ALSO...
post #3 in this thread is what i USED to do on wm6 as well as wm6.1
you might also want to look into disabling "Fast Sleep" or disallowing "Sleep" during phone calls using KaiserTweak...i got tired of the method in post #3 so i set the "Sleep" option to disallow in KaiserTweak, which automatically disables "Fast Sleep" also
Related
Well I've had my Tilt for a week now and I have been frustrated completely with the Phone App.
First of all, when I am calling a tone prompted location where you have to press the keys to get somewhere (611, corporate voicemail, etc), some of the time the phone will go into "hold" when i press the keys.
Secondly, after a call that i have pressed the keys for tone operation, the phone app will not completely close. the screen will stay half dim and the start bar and task panes are locked out. i can't access any of the icons at the top of the screen. the only button available is the task manager which shows no programs running.
i can pretty much replicate the 2nd problem consistently. does anyone else have this problem? Please try to call into a company say even 611, go through all the tone prompts and see if the phone app closes appropriately afterwards. make sure you are on the phone long enough for the screen to automatically dim.
the only way for me to get past this is to softboot so i can get access to the start menu again. but i'd rather not have to softboot after every phone call =T
Thanks!
Same problem here, any help would be great.
Massiv
disable the lock thing where you have to enter a pin - i think its a bug in the rom
Same problem - but if press the on/off button for the screen twice I do have again access to all icons. Not nice but ....
yeah i was messing around with the phone last night and realized that it has to do with phone lock and figured out if you press the power button to put it to sleep and press it again to wake it up, everything is normal again. it was just a fluke how i found out but i'm glad to know that this isn't only my problem. i was about to do another hard reset on the phone.
i called ATT techsupport and they told me it might be the simcard. can other Tilt owners chime in here. is this a ROM problem or could it be related to a faulty sim?
http://forum.xda-developers.com/showpost.php?p=1566518&postcount=2
Sorry if this has been discussed already, but is there a way to disable the Start Menu, and for that matter EVERYTHING but the dialpad while on the phone? I used KaiserTweak to keep my phone awake, but now everytime i go to use the dialpad while im on the phone, my ear has managed to open the start menu or some program and its very annoying .
TIA
I just knock the power button to disable the screen - then flick it on again if I need to tap keys.
I tried this but it doesnt really work. The phone seems to turn itself back on at some point during the call, and then when i go to hang up or use the keypad, i have google maps or some other app opened up. Major pain in the butt. If someone has a way to make the dialer app "always on top" or disable the start menu and/or taskbar when the dialer is open, that would be awesome for me.
by default, the screen is suppose to shut off after a few seconds while you are on a call. Have you made a reg hack to change this? or are you suing a cooked ROM? Most cooks will turn off this feature. Also, it's the first option in Kasier Tweak.
i've tried with it on and off. The problem seems to be that if you hit the wheel on the side (to adjust the volume) the screen turns back on...so if you want to adjust the volume, you have to pull the phone away from your face first, and then hit the power button again when you're done.
I find this rather annoying, but don't know how to adjust it.
When making a call, sometimes you have to press through prompts like, 1, 2 , 3 etc. But after listening to the prompts, I find the phone screen to be OFF. I know that it's a power saving feature. However, it's quite annoying when to have press other keys to continue. I have to press the power button to get the screen to come back on.
Secondly, when connected to a call, the dialpad goes to the status screen by default. I have to change to keypad as well.
So here are my questions:
1) Anyway to change the amount of time before the screen blanks out while in a call?
2) Any other way to turn on the screen quickly without have to push the power button (which is difficult to push BTW)?
3) Any way to make the dialpad go to the numbers by default after a call is connected?
Thanks for any inputs!
Using WM6.1 ROM by Duty
anubus12 said:
I find this rather annoying, but don't know how to adjust it.
When making a call, sometimes you have to press through prompts like, 1, 2 , 3 etc. But after listening to the prompts, I find the phone screen to be OFF. I know that it's a power saving feature. However, it's quite annoying when to have press other keys to continue. I have to press the power button to get the screen to come back on.
Secondly, when connected to a call, the dialpad goes to the status screen by default. I have to change to keypad as well.
So here are my questions:
1) Anyway to change the amount of time before the screen blanks out while in a call?
2) Any other way to turn on the screen quickly without have to push the power button (which is difficult to push BTW)?
3) Any way to make the dialpad go to the numbers by default after a call is connected?
Thanks for any inputs!
Using WM6.1 ROM by Duty
Click to expand...
Click to collapse
KaiserTweak should solve some of your problems, if you have installed it.
http://forum.xda-developers.com/showthread.php?t=333898
tkalli said:
KaiserTweak should solve some of your problems, if you have installed it.
http://forum.xda-developers.com/showthread.php?t=333898
Click to expand...
Click to collapse
that utility doesn't change any of those settings.
anubus12 said:
that utility doesn't change any of those settings.
Click to expand...
Click to collapse
isnt that was the fast sleep and the sleep function in KT does??
Speaking of dialpads,
Do any of you guys having problems with inaccurate digit presses? I mean, I try to press 2, and 0 gets pressed instead, or other adjacent and non-adjacent numbers. Quite annoying really. Anyone experienced the same?
Hey guys,
Right, I've come over from symbian, namely UIQ and the SE P-series, so am used to things being somewhat different. The main issue I don't seem to be able to find a solution to is the screen locking problem.
Essentially, at the moment I push the power button to lock the device, as well as enter a power save mode. I have to say, I like the way that works. However, when I recieve a call (or text with the reg fix) the phone comes to life, great, but say I miss the call, or the phone is in my pocket, the screen is now ACTIVE. Not good news.
How am I supposed to lock this device properly? Screen lock and then the power button? Can't I get a simple tap on the power button to lock and power save the device?
Essentially, if I have a missed call or message I just want the phone to vibrate once, then keep an LED flashing intermittently. But I want the screen to stay LOCKED.
Any help would be much appreciated, and thanks for all the other useful tips on the forum!
Cheers,
Daz.
Go start/settings/System/Long Press End Key
Select automatically execute etc
and Lock device
then OK
then, a long press on the hang up button (bottom right) will lock the phone.
Hope that helps
Perhaps I didn't explain myself. I know how to lock the phone, but how do I make use of the power button tap mode? In other words, the power saving mode?
Can I set up a button that locks the phone, AND sends it to power save mode? (or "turn it off" as WM seems to call it).
Thanks again,
Daz.
I found a regedit in:
HKLM\Software\HTC\KeyLock\SameAsDeviceLock
Set it to 1, but it doesn't do the trick. In fact, it now causes the power button click to not lock the keys.
I suppose the only option is to have standby mode come on after a timeout, lock the device, then it will go into standby on its own. Seems like a slight waste of battery to me!
Cheers,
Daz.
I really want this to work too,
It should unlock and turn on when recieving a call, it should just turn on when recieving an sms (so you can have a quick look from who it is, and then unlock to reply)
and when you lock the device it should automatically turn off...
Not EXACTLY what you want, but S2U2 in the "Development and Hacking" section will improve matters for you.
When you turn the phone off with the power button, S2U2 kicks in. Then:
1) If you turn the phone back on, you'll get the slide to unlock screen.
2) If a call comes in, the phone turns on and you see the caller ID (with full screen picture, if you so desire) on a "slide to answer" screen. The S2U2 default settings ensure that the phone turns itself back off again if you fail to answer it.
3) If a text / e-mail / mms comes through, it notifies you but remains off... When you hit the power button, the "slide to unlock" screen will show missed calls, text messages, e-mails (and even the weather if you want...).
Check it out, it's an essential piece of software in my opinion... http://forum.xda-developers.com/showthread.php?t=381588
Thanks sub69, great recommendation. However, does anyone else get the bug when hitting the "x" in other applications to close them, the status bar (Or task bar) goes all scrambled and looks like the S2U2 status bar.
Shame this isn't built in though, would be nicer to see the TF3D interface rather than a 3rd party one.
Thanks again!
Daz.
Anyone with other suggestions? S2U2 is just a little too buggy at the moment on the diamond...
use "BatteryStatus" from www.chti-tai.info, they have a option for devicelock on wakeup, so even u missed a call, and the screen light up, it is still locked.
somone posted this on other thread.
--------------------------------------------------------------------------------
Now we don't need any devicelock software with diamond.
If you want automatic lock your diamond you have to change this registry key HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off automatically your device are locked
Sorry for may bad english but i'm italian.
Ciao
Thanks for that reg fix, seems like a good option. There was a new S2U2 version release, 1.5, and that seems to work well for me. Will see how that goes for now...
Cheers guys! Daz.
the reg edit is good, but it doesn't solve the problem of unlocked touchscreen prone to being pressed during incoming call (when scrambling in your pocket to take out the phone)
btw there are several other threads where this problem is addressed and deeply analyzed (without a complete working solution, however...)
dazbradbury take a look at sensorlock, if you have not already.
I'm using Zeus 6.11. This is perhaps a "feature not a bug" but I'd appreciate an explanation from those who know!
During a call, the screen detects when it is near something (a face!) and switches off. Great - but when I need to input numbers during a call, it keeps switching the screen off when I move my hand near it.
Is there a way to disable this so that I can input numbers during a call?
Thanks, and sorry for the stupid question if it is one (it probably is).
just try not to block the distance sensor which is next to the front camera(including ur hands and fingers)...the screen will light up automatically..
Sent from my LG-P970 using Tapatalk
or you can just press power button to unlock screen and it will last the time you setup at screen settings
Felsar said:
or you can just press power button to unlock screen and it will last the time you setup at screen settings
Click to expand...
Click to collapse
Just make sure you don't have the "Settings->Accessibility->Power button ends call" checked
It took a day to figure out why pressing the power button ended the calls, i forgot about this option and there was nothing related to it in the Calls section.
verszipo said:
Just make sure you don't have the "Settings->Accessibility->Power button ends call" checked
It took a day to figure out why pressing the power button ended the calls, i forgot about this option and there was nothing related to it in the Calls section.
Click to expand...
Click to collapse
to be honest I've never saw that option... but [I've just checked it out ] it's true... but since is disable by default I think it should represent no problem