help with my Kaiser - Tilt, TyTN II, MDA Vario III General

Hi, every1. how are you.
I have few problem with my kaiser. if anyone can help please.
here's my device info, holp it helps.
Windows Mobile 6.1 Profesional (Build 19212.1.0.3)
ROM version: 3.28.405.0 WWE
ROM date: 05/02/08
after I upgrade my Windows Mobile 6 to HTC TyTN II - Windows Mobile® 6.1 Professional Upgrade from htc's official site.
the first problem I had after upgrade is my camera wont work it starts up with all its icons but there is no camera screen everywhere is black.
second problem is on every restard I have to re-do my setup again from the begining from align, stylus and password 'Tap the screen to set up your Windows Mobile-base device.'
also it feels abit slower now then before.
I tryed to update my rom file ' HTC TyTN II - Operating System [ROM] Update' from htc's site but it displays 'Sorry, this software download is not suitable for your device. '
here's the list of updates i done from the official htc's website.
Bluetooth Hot Fix (for HTC TyTN II, WM6.0 version)
fix for TyTN II photo quality issue (for WM6.0 version)
Hot fix for system hang resulting from Bluetooth usage when memory is low (for WM6.0 version)
HTC TyTN II - Windows Mobile® 6.1 Professional Upgrade
thanks in advance.

hmm strange but now is working after i've chose Clear Storage program...

alex_uk said:
hmm strange but now is working after i've chose Clear Storage program...
Click to expand...
Click to collapse
Glad it's sorted.
Always Hard Reset (a.k.a Clear Storage) after flashing a ROM.
The best time to do this is at the "Tap to Begin Customisation" *, just after flashing the new ROM (*or whatever that screen says).
Ta
Dave

Related

HTC TYTN II Weird Behavior After Upgrade to 6.1

Hi Guys,
thanks for the good job you'all are doing. Will appreciate whatever help i can get to resolve this issue with my phone. I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. Since then i have noticed that sometimes it seems my phone is dialing itself or a call is coming in. The funny part is though every other function is working i wont be able to answer this phone. It will seem to hang. Then after a while i will get the cprog.exe error. To be able to make phone calls i have to soft reset the phone. i have had to hard reset my phone twice already with no solution. Also googling has not been able to provide any answer too. I just sent an email to HTC Technical support now but with experience i doubt if i will get any useful response. So this is my last resort.
It is also pertinent to note here too that intermittently i do get the tmail.exe errors.
Hi,
I am having the same problem after the upgrade..frequently its becoming stoned! requiring restart many time during the day...which was not the case before...anybody has got any solution???
I love my TyTn II but not the 6.1 ..its not stable!
azuka said:
Hi Guys,
I have the HTC TYTN II which i recently upgraded to WM 6.1 using the official ROM which i donwloaded from HTC website. ........ errors.
Click to expand...
Click to collapse
Azuka, who so ever upgraded to 6.1 from HTC experienced the same problem even i myself suffered the same. So your only solution is to downgrade to 6 but before doing that you must HardSPL your phone ...
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
NotATreoFan said:
Two words... bad flash.
Regardless of what you might hear about WM 6.1 being unstable/unusable, it's simple NOT TRUE. Head over to the Kaiser Wiki, read up on flashing HardSPL (really read), and then once you have HardSPL'd your phone, flash a different ROM.
But please do not make the mistake of asking for recommendations on which ROM to use. The ROM that works best for me probably will not work best for you, in terms of programs loaded and cosmetically.
Click to expand...
Click to collapse
Thanks for your reply. Your two words "Bad Flash" got me thinking. How could that be. I thought so too and had to re-download the file from htc website and re-installed.
About HardSPL'd your phone, from reading the wiki i now know what it is. But there is no instruction out there to HardSPL'd. Do i need to get the file and copy unto my phone or what?
thanks.
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
NotATreoFan said:
Head over to the Wiki, and under ROM Upgrading - Tools, I added an entry to HardSPL v3.xx. All the instructions needed are in that thread.
Click to expand...
Click to collapse
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
azuka said:
Thanks for your help for far. This is an update of where i am today and a few questions i need your help to answer:
I took my phone into the retialer where i bought and who serve as the service center for HTC here in Doha, Qatar. They re-installed the WM 6.1 OS and so far i dont have the issues i was having before. However i do experience momentary screen freezes which eases off after a few second. Right the device information is as follows:
ROM Version: 3.28.405.0 WWE
ROM date: 05/02/08
Radio Version: 1.65.17.56
Protocol Version: 25.83.40.02H
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Thank you once again.
Click to expand...
Click to collapse
I have the freezing issues too. Two things has helped me reduce the frequency (and improve general responsiveness of the device):
1. I've disabled the HTC task manager application - that helps a lot on responsiveness
2. Each time I soft reset the phone, I manually kill the mstli.exe process - that helps a lot on the freezing issues.
regards,
Spip
Just to share some experiences
So I have the TyTN II and I recently upgraded to the official HTC WM6.1.
I have none of these problems of screen freezing, unstable rom, etc etc etc...
However, I do suffer from occasional program error message and asks me quite a few times to send the report to microsoft.
But this only happens when I load certain third party softwares and then close them down.
I attribute this to compatibility issues with WM6.1...maybe I'm wrong. But that's what I think anyway.
azuka said:
Going into the bootloader the i see the following information:
KAIS130
SPL-3.28.0000
CPLD-8
Which i believe confirms that the HardSPL is 3.28 - please correct me if i am wrong. Now my questions are as follows:
1. How do i resolve the momentary freezing?
2. Do i still need to do a HardSPL giving that mine is showing 3.28?
3. And your answer to do above is Yes which version do i need to do? 3.28 or 3.29 or even 3.56
Click to expand...
Click to collapse
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
I had this issue and it was just down to previous HardSPL being left at an early version (I think around 1.02) on the device and if you apply this latest HTC stock ROM update you get a bad flash and freezing especially in the threaded SMS app.
Install any HardSPL later than 3.00 then redo the ROM update and it should cure it.
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
NotATreoFan said:
You do not have HardSPL on your phone. You have SPL 3.28, which was flashed to your phone as part of the WM 6.1 upgrade. If you want to try out custom ROMs, you will still need to flash HardSPL 3.xx.
I recommend flashing HardSPL 3.56. It was ripped from an AT&T build, but seems to work great with all flavors of WM 6.1.
As for the freezing, it cannot be eliminated 100%. But with a good cooked ROM and the right HardSPL, you will rarely experience one.
Click to expand...
Click to collapse
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
if u need upgrade or downgrade then u r speaking about a need for hardspl
dkiersz said:
If I want to downgrade from official wm 6.1 to official wm 6.0 that is in xda, do I need a spl or hardspl ???
By the way, the problem I am having with WM 6.1 is support code 86000107, sync problem that until today don't see a solution
Click to expand...
Click to collapse
Just a quick update. After HardSPL-ing my phone it worked well for sometime then the tmail.exe error surfaced. I have only had the cprog.exe error - where a call comes in and i can not answer neither can i make another call until i soft reboot - has only happened once or twice. Apart from these the phone has been working well.
Anyway i just got a reply from my earlier mail to HTC and thought i should post if here for people's information. Apparently they are aware of these issues and working on them. Read for yourselves:
New Response From [ Maha Mamer (Qatar Support (Tech)) ]
Thank you for contacting HTC Corporation Middle East Support Dear Mr. Felix First of all we are very sorry for our late reply Please, if your problem still exist with this error message, you can try one of two options. 1- go to Start> Settings> System(tab)> error reporting> and disable the error reporting option. 2- If this did not solve your problem, then you might need to get back to WM6.0 until we finish our update for the new release of WM6.1 with the new modification for our web site. Please do not hesitate to contact us back for any inquires. Please note that you could also contact us by phone on our hot lines. http://www.htc.com/mea-en/CA_Hotline.aspx?region=MEA Sincerely, thank you for choosing HTC Corporation HTC Corporation Middle East Support Team http://www.htc.com/mea-en/default.aspx
Just an observation here:
After reading somewhere on these pages that the erratic behavior of TYTN II could be due to bluetooth adapter i decided to go some days without my Motorola S9 bluetooth ear piece i am yet to experience any of the issues i had before. Could the bluetooth software for WM 6.1 be the issue?
Momentary Freezing - Resolved?
azuka said:
Thanks guys. I just did the HardSPL 3.56 and re-installed the HTC official 6.1 ROM. So let's see how it goes.
Btw, HardSPL-ing is not as difficult as it seems though.
Right now the following is my configuration:
KAIS130
SPL-3.56.Hard
CPLD-8
Device Information is as follows:
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.17.56
Protocol version: 25.83.40.02H
Thanks all.
Click to expand...
Click to collapse
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
wa4cbg said:
Did you ever resolve your momentary freezing issues? I have a new TYTN II that I upgraded to WM 6.1. I used hardspl 1.0 to do that but after reading numerous posts, I loaded HArdspl 3.28. After installing hardSPL 3.28, the 5 second freezes are less frequent but happen everyday.
I am not sure where to go from here? load another HSPL? Reload '3.28.405.0 (Radio 1.65.16.25) original HTC WWE (World Wide English) ' ROM?
As you know these pauses are very annoying.
Tytn II - Kaiser
ROM Version: 3.28.405.0 WWE
ROM Date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Click to expand...
Click to collapse
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
How to Stop Momemtary Freezing
azuka said:
Actually the freezing is barely existent. Even the other issues seemed to have disappeared since i stopped using my bluetooth.
Click to expand...
Click to collapse
I am looking for a solution. Not using Blue tooth to use a device that costs over 600.00 just doesn't make sense to me.
Is there a ROM hardSPL combination that will give me freeze-free performance or is this an HTC problem that is not solvable. I just can't believe that every Kaiser user that has upgraded to wm 6.1 has the same issue that I have with momentary freezes that last up to 5 seconds.
Is the solution another ROM, another Hspl, another phone? Who can help me resolve this issue? Is there a better place to post this?
Thank you
Freezes and locks.
Prior to my upgrading my AT&T Tilt to WM6.1 which I did today. I was experiancing LONG freezes, listening to music or just waiting for menus. I could not determine any specific software that was the cause. I tend to install a lot. Did a hard reset, didn't install the AT&T bloat, reinstalled my primary apps MS Voice Command 1.6 (a Must). Still same issues... Occationally could NOT answer calls. Hit the green button, or the answer option on screen. the onscreen 'answer' would flash, but I could not use the phone until a soft reset. LONG process when you are waiting for a call back.
AT&T sent me a new phone which I got and installed the NEW wm 6.1 before anything. Worked pretty well, but I had not made any calls or recieved any all day. I did listen to several hours of music on my Motorola S9 headset and made sure Audible Player would work. Two apps I use daily.
All seems well, except NOW I get the cprog.exe error. I decided to test my phone with a simple incoming call. Before I ended it, it went dead. Not sure what the HardSPL is yet. Will look into that. Just thought I'd let others know that the lag, AT&T seemed to think was a hardware issue so they replaced my Tilt.
Software installed; MS Voice Command 1.6, Live Search, Audible Player, TCPMP, FlashBundle, GPSToday. Pretty much it besides the AT&T bloat that came with the ROM. Good luck

Tytn Ii Rom Upgrade

Hi all,
I have TYTN II which was bought in duty free and it is not connected to any network.
ROM Version: 1.81.415.4 WWE
ROM Date: 10/29/07
Radio Version: 1.27.15.32
Protocol Version: 22.51.88.13H
Bootloader (TriColor) screen showing following:
KAIS130
SPL-1.93.0000
CPLD-8
Serial
Please let me know if i can upgrade my rom to the latest one HTC TyTN II-RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe
which i downloaded directly from the HTC but without previously upgrading with HardSPL 1?
Thanks
Yes but why
You don't need to install hardSPL to run the HTC official upgrades from an existing official HTC installation. It's a very straightforward process but be aware many people have found the HTC official TyTN II Windows Mobile 6.1 upgraded ROM to offer deteriorated GPS performance with times to get a satellite lock taking significantly longer. I also found the latest WM 6.1 ROM and Radio combination (what you're looking at upgrading to) to contain quite a few bugs that weren't even in the original WM 6.0 ROM. If you upgrade and don't like it, it's not a straightforward process to put it back again (the HTC repair centre reverted my TyTN II) so make sure it's what you really want.
***Edit*** If your new ROM is for a different region eg Europe vs South East Asia, the ROM *may not be accepted either (I've never tried but I know flashing different languages is a definite nono the 'official' way). If the HTC Website offered up this ROM for your serial no, it should flash through ok.
Thank you for prompt answer Flying Kiwi ,
I have to try upgrading ROM to the latest one in order to try fixing problem i am facing described in this thread http://forum.xda-developers.com/showthread.php?t=434884
Now, is it worth trying to upgrade to the latest ROM or my problem is of hardware nature?
Thanks
ROM flashing to fix such an issue not advisable
jeremija_de_niro said:
Thank you for prompt answer Flying Kiwi ,
I have to try upgrading ROM to the latest one in order to try fixing problem i am facing described in this thread http://forum.xda-developers.com/showthread.php?t=434884
Now, is it worth trying to upgrade to the latest ROM or my problem is of hardware nature?
Thanks
Click to expand...
Click to collapse
I've replied to that thread but I strongly suggest you don't go down the path of flashing a new ROM (even if you could) to fix a problem present in the device with an HTC official setup like this. It's time to call HTC and (possibly) send it off for Warranty investigation if you have correctly prepared the desktop PCs first. I'm sure that HTC wouldn't release a ROM which had issues that significant on a device so I'm sure the problem is not with the ROM itself.
gps software upgrade
hi
i have a problem that while purchasing my tyttn 2 the rom installed doesnt have the gps software . any body can provide me with a serial for another fone that can get me the software as while providing my serial they are giving me the update of the middle east which doesnt include the software

UpGrade ROM

Hello everybody !
I have a G4 Wizard (Qtek A9100) and I'm trying to update its ROM after read a lot of topics on XDA-Developers (Wizard Windows Mobile 6 for newbies), GFórum and PlusGMS fórum.
IPL: 2.22.0001
SPL: 2.22.0001
GSM: 02.46.11
OS: 2.22.17.1
I already used two diferent chips from two diferent telephone companies which means SIM is unlocked (is that right ?)
After sometime reading I concluded that CIM was locked.
I downloaded HardSPL software and run yesterday.
Now, after HardSPL
IPL: 2.21.0001
SPL: 2.21.Olip
I believe that now CID is unlocked. (Is that right ?)
Then I used RUU from three different ROMs and the same error appears:
ERROR 300: Invalid Update Tool.
"This Update utility cannot be used for your PDA Phone.Please get newer Update Utility"
What does it means ?
What is wrong ?
Tks for your help,
Cássio
Replace the RUU in the Rom with the Mun's RUU provided in the HardSPL thread and run that RUU,it'll work.
ROM UpGrade
Thanks for your help !
Everything works well !
Now it time to learn about WM 6.1 and the new ROM features.
I flashed with Diamond Edition. I know there were a lot of ROMs to be used but this one has info safe for G4...
Does CID unlocked even after the flash I made or if I intent to flash another ROM I need to CID unlock again ? As I used HardSPL I understand it is unlocked.
Tks again for your unique help !!!
Best regards,
Cássio
Thanks! you are most welcome.Yes! it'll will remain semi-permanent Cid unlocked,untill you remove HardSPL,you do not have to apply HardSPL everytime you flash a new rom,just flash as many roms as you wish straight away
Is there any new rom version available for O2 MINI S may be relaeased in 2008.
Zabardast_1,
Now with the new WM 6.1 several questions come up...
1. When I start the Smartphone, a number appears on left upper corner (72410). What does it means ?
2. Wizard doesn't has internat GPS. I have a Deluo GPS antena and I use Destinator software.
Bluetooth is working once Deluo blue light is not flashing (if it is flashing means bluetooth is not connected), but I couldn't until now start using GPS because antena can't find much satellites. There is a set up on Destinator software to configure the GPS but on WM6.1 there is a GPS icon too. Do you know if I need to configure something on WM 6.1 ?
3. Some softwares I had installed on my Storage Card doesn't appears (ShortCut) but they are running when I run using file manager. How can I add these shortcuts on Programs area ?
4. The Wheater tab brings me temperatures in F. Is is possible to configure it to bring in C ?
I noted that battery goes down faster than when I was using WM 5.0 Is it normal ? Is it related to the version of the ROM ?
What differs one ROM from another ROM (considering WM 6.1) ?
I'm sorry for the questions but I'm trying to learn...
Best regards,
Cássio
Sync
Hello,
Some of the problems above I solved, but now I'm facing a serious problem with sync.
I use a Notebook (XP) @ work and another (Vista) @ home.
Everytime I sync with one of them, the other doesn't sync and vice-versa.
What is happening ?
Tks in advance.
Regards,
Cássio
Synch problem
Hello everybody,
I'm still facing synch problems.
Now one more problem come up: Fail to synch due to a register on calendar.
I deleted it on Wizard and on Notebook. Still happening.
Removed and instaled ActiveSync.
Still happening, but this register doesn't exist anymore !
What is happening ? What can I do to fix it and sync with Vista and XP on both Notebooks ?
Thks in advance.
Best regards,
Cássio

T5355 can't update to wm6.5 ???

i got my HTC diamond 2 t5355, and i found lot of problems there that i couldn't find the solution.
here are the info about this phone,
it comes with 256 and 128 windows mobile 6.1, ce os5.2.20954, qualcomm msm7200a cpu, Gps (with i was told it come with SiRF III gps chip set), wifi, blue-tooth.
installed softwares:
fly manila 2d
arcsoft mms composer 4.2.8.1
enablerapi enablerapi
.net 3.5
X HTC
fly ImeVibShortCut
... ( those i guess not so important to list out)
in the system storage root there are files(i don't know the extension):
cemail
.net
mxip_lang
mxip_notify
pim
and then i found the gsp software can't detect the gps. i hv try Nav4All, it said it can't detect the gps or it is turn off.
so, i try to update my cell phone to wm6.5, hope that will solve that problem, but i just can't flast the rom
i am using the offical (i guess) RUU_Topaz_S_Telstra_WWE_2.31.841.6_Radio_Sign_Topaz_61.39tc.25.30_4.48.25.20_Ship
for the update my phone, but it can't detect my phone's image version, it just simply said "image version", and it stops at 0%, my phone's lcd turn off back to the screen saver mode and the activesync was turn off too.
the update fail.
come with an ERROR 260
i really don't know which step i am doing wrong, i have try on the xp, vita system already, same problem.
will anyone kindly tell me why?
This phone not HTC.
It is the Chinese fake.
I have files with WM6.5 for this phone.
GPS has started to work after installation of program A-GPS.
This phone not HTC.
It is the Chinese fake.
I have files with WM6.5 for this phone.
GPS has started to work after installation of program A-GPS.
wm6.5 for t5355
Kindly I need wm6.5 for the same mobile
Where could I find wm6.5 for the t5355 ?
Thank you
nikandr said:
This phone not HTC.
It is the Chinese fake.
I have files with WM6.5 for this phone.
GPS has started to work after installation of program A-GPS.
Click to expand...
Click to collapse
can you give to us the rom? and how we can to flash him? have you same instruction??? thx
Where could I find wm6.5 for the t5355 and how i can to flash ? Please help.
hi
where are you buy this phone? and what wrong with him? i want this model http://cgi.ebay.com/ws/eBayISAPI.dl...sories&_odkw=t5353%2B&_osacat=0&_fvi=1&_rdc=1
some diamond2 can't update spl ,because their wafer is special,must cost £ 3 to update spl . author is xda‘s developer bad luck for you

[Q] I cannot upgrade my HTC diamond touch p3700

I have downloaded BsB 6.5.1G and also Diamond: [WWE] BsB 6.5/6.5.3 but whenever I sync my mobile phone and start trying the process as required by the intructions on my PC screen it always disconnected when it gets to update displayed by the software version by this time my phone would have displayed four different colour, the version of my device.....
what is the solution or what I should do to pass through this stage?
adebobo1 said:
I have downloaded BsB 6.5.1G and also Diamond: [WWE] BsB 6.5/6.5.3 but whenever I sync my mobile phone and start trying the process as required by the intructions on my PC screen it always disconnected when it gets to update displayed by the software version by this time my phone would have displayed four different colour, the version of my device.....
what is the solution or what I should do to pass through this stage?
Click to expand...
Click to collapse
if you want to upgrade the ROM WM 6.5, previously you had to upgrade HardSPL first
This thread hard spl http://forum.xda-developers.com/showthread.php?t=400402

Categories

Resources