I have installed Mamaich's 1.33.51 (final), and radio 1.10 and BT3900, the problem of "Cannot hear you" has disappeared for two weeks, but it came gain this morning. I found that there is one coincidence, may be you can help to verify this so that someone might gives us a solution:
When I set up the clock alarm to wake me (say 8am in the moring), the cannot hear you problem comes immediately (after the clock alarmed at 8am). I then turn off the alarm (unclick the clock alarm option), the problem seems has gone (better softreset afterwards).
Excellent news...this means nobody should get out of bed before 8 AM.
I am seeing this scenario:
EMPLOYEE: Goodmorning Boss
BOSS: Why are you late everytime
EMPLOYEE: Well, I can not set my alarm clock before 8 AM, coz people will not be able to hear me on my phone...!
:lol: :lol: :lol:
Anybody else using Spb time with their Tilt? I have a problem of it not sounding off the audible alarm from a state of hibernation. The alarm screen will wake the phone up, but no sound. I can hit snooze and then the audible alarm will sound off. If the phone is awake, and the alarm goes off, then it work correctly.
Anybody else experience this?
this problem is already known, ask the support of SPB and they will send you a Beta version of the new SPB Time for WM 6
PS: Ok here is the link:
http://www.spbsoftwarehouse.com/downloads/beta/tt2/SpbTime_1172_setup.exe
GekoCH said:
this problem is already known, ask the support of SPB and they will send you a Beta version of the new SPB Time for WM 6
PS: Ok here is the link:
http://www.spbsoftwarehouse.com/downloads/beta/tt2/SpbTime_1172_setup.exe
Click to expand...
Click to collapse
Thanks for the info! I didn't see anywhere this was a known issue. I hate asking question that have been aswered already.
I didn't have any problems with it on the 8525 and WM6.
no problem. For me it fixed the problem i hope for you as well.
Geko
I got IM+ and Flexmail2007 running in the background on my AT&T Tilt and when the phone receives an alarm (e.g. an IM+ user coming online), it wakes up and sounds the alarm, however it does not go back off after 1 minute (my setting to go off on battery). Is anyone else having this problem?
Thanks,
honestly that doesnt sound like a problem. it sounds like it's working as designed to me. I know that doesnt help you, but with the software that you described, that's the behavior I'd wish it to be if I engineered that software.
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
I think i remember reading something similar to this on another thread. where the problem was something to do with time sync (by activesync or network). Perhaps somebody who has had this problem can help?
Try disabling the HTC Home plugin and the Task Manager. That seems to help fix it.
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
bo78 said:
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
Click to expand...
Click to collapse
I have some problem and use another alarm proogram.
Try to use some another program like SPB Time or another.
Blacksheep said:
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
Click to expand...
Click to collapse
exact same problem here (i did visit germany not france though )
does anyone have a solution without disabling things like the home plugin?
(it's not the auto change timezone/clock from sim setting as i have that before this prob occured and its still off...)
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
You may want to check your time zone is correct. Also check that the time IS NOT being updated from the network, if your cell provider has an incorrect time zone this could cause the problem.
I have been having the same problem. I can set an alarm for 8:00AM, but it will ALWAYS go off at 7:00AM. If I set it for 8:01AM, it will go off at the right time. I have no idea why it's happening and can't seem to find a solution...
Alarm Problem
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:20 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
cliff_lusk said:
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:30 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
Click to expand...
Click to collapse
I just tried SKTools from this thread recomendation. Hopefully that will work.
Hilal said:
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
Click to expand...
Click to collapse
I agrree - clean Notification Que....., BUT cleaning every week, monts ... so boring.....
stop using buged WM clock to alarm - well, how I said, use some another clock program like SPB Time or similar.
I've always had alarm clock issues with every wm device I've ever used. Either going off at the wrong time or not at all. I downloaded 3rd party gentimer and just transfer it to each new device as I get them. I know I shouldn't have to do this and MS should have a better more reliable alarm system, but for a one time charge of 12 bucks I have peace of mind and no. more dickin' with the damn oem alarm. It's worth it IMHO.
cliff_lusk said:
I just tried SKTools from this thread recomendation. Hopefully that will work.
Click to expand...
Click to collapse
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
cliff_lusk said:
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
Click to expand...
Click to collapse
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Jim_R said:
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Click to expand...
Click to collapse
What do you mean delete the existing timers? Where do I delete them?
I use my old Nokia N70 just because it's so pathetic that HTC or MS (don't know whose fault it is) can't fix a proper alarm.
cliff_lusk said:
What do you mean delete the existing timers? Where do I delete them?
Click to expand...
Click to collapse
Perhaps I confused you by calling the alarms 'timers'. Here's how to delete them:
Start, Settings, Clock & Alarms, Alarms tab.
To delete a previously set alarm, uncheck the checkbox, and de-select days of the week. Click Ok. Do a soft reset.
In my experiance, this will remove duplicate alarms as well.
I've tried that with the exception of removing all of the checked days of the week. I will try that and see what happens. Thanks.
I have SGS - official f/w 2.1 via KIES.
In UK on an unlocked phone, with Vodafone SIM.
Set alarm (standard clock) ... and it does not work if phone switched off ! .... i.e works OK if phone is switched on ... but not if phone is off, which is normally how I would leave phone overnight.
I amazed, my 14 yr old Nokia does this no problem ! ..... I googled around and on some other Samsung phones you can fix it under profiles ... but can't find a solution for SGS .
This seems a significant bug, or at least an oversight - can't belive anyone would design it to work like this on purpose.
Any work around ?
Even with my SGS turned on, 4 times out of 5 the alarms do not go off. I think the alarms have a bug.
Probably you have a task killer ending the alarm.
the phone must be on for the alarm to function .
the alarm cant switch on the galaxy s , says it in the manual
Alarm Bug
mayhem2408 said:
Even with my SGS turned on, 4 times out of 5 the alarms do not go off. I think the alarms have a bug.
Click to expand...
Click to collapse
Happened to me this morning as well alarm comes on but no sound,i called my phone and volume works....
I don't have that issue but i recommend you try another alarm app such as "Alarm clock plus" is a good choice.