Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
I think i remember reading something similar to this on another thread. where the problem was something to do with time sync (by activesync or network). Perhaps somebody who has had this problem can help?
Try disabling the HTC Home plugin and the Task Manager. That seems to help fix it.
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
bo78 said:
Hi, this morning the WM alarm clock of my tytn ii failed to raise at the correct time, but finally the alarm did go off about 58 minutes later (the device was left untouched in sleep mode until that). The notification still showed the correct alarm time in the message, and the acutal time (wrong) time in header and top bar.
Never heard of this problem before, any suggestions??? Please help me to identify the problem with this "ready for business"-device (lol).
Click to expand...
Click to collapse
I have some problem and use another alarm proogram.
Try to use some another program like SPB Time or another.
Blacksheep said:
I do not know if this is connected or not, but -
I have a (perhaps) similar problem with the alarm.
My alarm is set to 07:30 every morning.
A while ago, I travelled to france and adjusted the time zone by one hour. I have since returned home, but since, the alarm rings at 06:30 every morning.
The setting is still 07:30.
There is no alarm set for 06:30.
The system **** shows the correct time and the time zone is also correct.
Is it possible that 'old' and incorrect entries are stored in the registry, and trigger the alarm wrongly?
Click to expand...
Click to collapse
exact same problem here (i did visit germany not france though )
does anyone have a solution without disabling things like the home plugin?
(it's not the auto change timezone/clock from sim setting as i have that before this prob occured and its still off...)
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
You may want to check your time zone is correct. Also check that the time IS NOT being updated from the network, if your cell provider has an incorrect time zone this could cause the problem.
I have been having the same problem. I can set an alarm for 8:00AM, but it will ALWAYS go off at 7:00AM. If I set it for 8:01AM, it will go off at the right time. I have no idea why it's happening and can't seem to find a solution...
Alarm Problem
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:20 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
cliff_lusk said:
I have the same problem. My alarm goes off at 5:20 a.m. every morning. I updated the TILT rom with the new updated AT&T rom. I set the alarm once for 5:30 am. After that it has gone off at that time every morning regardless of what I do to the alarm clock settings . Anyone know how to fix this problem????
Click to expand...
Click to collapse
I just tried SKTools from this thread recomendation. Hopefully that will work.
Hilal said:
Try cleanining the notification Que using sktools or some similar program, this alarm problem is a well known bug in WM devices and has been for a long time
Click to expand...
Click to collapse
I agrree - clean Notification Que....., BUT cleaning every week, monts ... so boring.....
stop using buged WM clock to alarm - well, how I said, use some another clock program like SPB Time or similar.
I've always had alarm clock issues with every wm device I've ever used. Either going off at the wrong time or not at all. I downloaded 3rd party gentimer and just transfer it to each new device as I get them. I know I shouldn't have to do this and MS should have a better more reliable alarm system, but for a one time charge of 12 bucks I have peace of mind and no. more dickin' with the damn oem alarm. It's worth it IMHO.
cliff_lusk said:
I just tried SKTools from this thread recomendation. Hopefully that will work.
Click to expand...
Click to collapse
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
cliff_lusk said:
SKTools did not work. My alarm still goes off at 5:20am. Anyone have any ideas on how to make this turn off?
Click to expand...
Click to collapse
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Jim_R said:
What has worked for me in the past is to delete all existing timers, do a soft reset, then re-create them. In your case, I'd be tempted to change the timer, then delete it, then reset and re-enable.
Click to expand...
Click to collapse
What do you mean delete the existing timers? Where do I delete them?
I use my old Nokia N70 just because it's so pathetic that HTC or MS (don't know whose fault it is) can't fix a proper alarm.
cliff_lusk said:
What do you mean delete the existing timers? Where do I delete them?
Click to expand...
Click to collapse
Perhaps I confused you by calling the alarms 'timers'. Here's how to delete them:
Start, Settings, Clock & Alarms, Alarms tab.
To delete a previously set alarm, uncheck the checkbox, and de-select days of the week. Click Ok. Do a soft reset.
In my experiance, this will remove duplicate alarms as well.
I've tried that with the exception of removing all of the checked days of the week. I will try that and see what happens. Thanks.
Related
OK, I just discovered this...
The text under the big clock in Home tab of TF3D always says 'Alarm off'!!
I have been messing around with the manila files and testing stuff so I thought it was me that had done it...
So I did a hard reset... and it's still says 'alarm off' even if I set the alarm..!
Anyone else got this?
hey
I wondered about this for a while - for instance today (friday) mine says alarm off but i have one set for every weekday - sunday night the alarm off will change to alarm on - i think it has a 12 hour refresh.
Yeh, Mine only says alarm is on if it is sceduled to go off the next day.
Ok I figured it out ...
It will only show the alarm time if there is an alarm within 24 hours...
Stupid! WTF! I did a hard reset for nothing..Arghh
can someone help me with this please?
for some reason, my Tilt alarms at 8:10 and 8:15pm every night
the alarms are not set for this time. I first noticed this when I changed the time to daylights saving
has anyone else had weird thing like this?
or is there something I am missing here? and how can i fix it?
thanks so much in advance!
I got the same problem PLUS i have two extra alarms that go off at 6pm and 630pm even though I dont have my alarms set at that time!
I'm glad I'm not the only one!!! I thought I was going crazy. The only added info I can give is that I set an alarm last Saturday night for Sunday morning - DST change weekend. I set it for 7am - thinking the clock would change time overnight (it did) and alarm me at 7am NEW time.
I got an alarm at 6am (new time) and again at 7 (the one that was actually set). All week since, it's been going off every morning at 6am. I've disabled ALL alarms, and it still goes off. I've tried changing the time to 5:59am, and letting it tick through 6am - it will not go off then.
If anyone has any answers, I'd be much obliged to hear them - before tomorrow at 6am
radi0chik said:
I'm glad I'm not the only one!!! I thought I was going crazy. The only added info I can give is that I set an alarm last Saturday night for Sunday morning - DST change weekend. I set it for 7am - thinking the clock would change time overnight (it did) and alarm me at 7am NEW time.
I got an alarm at 6am (new time) and again at 7 (the one that was actually set). All week since, it's been going off every morning at 6am. I've disabled ALL alarms, and it still goes off. I've tried changing the time to 5:59am, and letting it tick through 6am - it will not go off then.
If anyone has any answers, I'd be much obliged to hear them - before tomorrow at 6am
Click to expand...
Click to collapse
Sounds like there are extra notifications in the notifications queue. I had a similar problem on my 8125 once. Get Memmaid (the trial should work just fine) and do a memory cleaning and go into the notifications queue and delete all duplicates. If that does not solve it, look in the queue and look for an alarm at 6am and delete it. That should take care of it I think. Good luck.
interesting program thanks for the tip! I did a memory cleaning and then went into the notification queue. I couldn't find a 6am (or anything that resembled that) entry, but I did select "time based", "classic time based" and "event based" and asked it to "rebuild notification queue" - I'll let you know sometime after 6am tomorrow if it worked. Thanks again!
Windows Alarm
I gave up on Windows Alarm a long time ago. I now use G-Alarm. Its a very good program and its free. If your having issues with your alarm use G-Alarm.
bradecrain said:
I gave up on Windows Alarm a long time ago. I now use G-Alarm. Its a very good program and its free. If your having issues with your alarm use G-Alarm.
Click to expand...
Click to collapse
That'd be fine if I could get rid of the CURRENT alarms
Clearing the Clocks
Try SKTools. It can clear the alarm cache. Also G-Alarm fixes the Windows Alarm bug. and in the options can override the windows alarm system. Give it a shot.
Have you checked to see if there are any appointments saved that reoccur on your pc that transferred when you sync ? I know that if you set a scheduled appointment, you will also get an alarm as a reminder.
I personally use Chronos for an alarm, but this (and a few other posts ;-) ) are off topic what the OP is asking.
It *has* to be in the notifications, so look through them carefully.
as far as i can tell
there are only 3 spots for alarms...and there are no other notifications or reminders for anything else, especially not for the same time every freaking day at that same time
its killing me slowly inside...
scowltura said:
Sounds like there are extra notifications in the notifications queue. I had a similar problem on my 8125 once. Get Memmaid (the trial should work just fine) and do a memory cleaning and go into the notifications queue and delete all duplicates. If that does not solve it, look in the queue and look for an alarm at 6am and delete it. That should take care of it I think. Good luck.
Click to expand...
Click to collapse
I downloaded Memmaid. I did the memory cleaning like you suggested and that fixed it. I'm no longer awakened at 6am. THANK YOU! I looked in the notification queue but couldn't find duplicates of anything... but the cleaning bit seems to have fixed it. Thanks again!
Hey All, I've have recently flashed Touch-it V4 to my Xperia, but now the clock keeps on randomly changing the time on me. Usually puts it out by an hour, or sometimes 15mins. I've tried putting day light savings time on, selecting my city etc but still randomly changes the time on me.
Also noticed if I set my country, it will randomly change itself as well. Eg. set it to New Zealand, then go back and check and it will be on Fiji??
Anyone know how to fix this?
Is super annoying as messes up my alarms & appointments, nearly missed my flight the other day.
Cheers
Same problem here. Seems to be a TF3D bug. It doesn't seem to recognize daylight savings time. It keeps switching me to the "Bogota, Lima" timezone which is 1 hour behind my real timezone of Eastern Standard (US).
I'll have to use a different panel for now to keep my schedule/alarm on time, probably the SPB Mobile Shell.
Alternatively I could just use "Bogota, Lima" time and set it 1 hour ahead, but then every time I sync the phone, the time will be reset to 1 hour behind and throw my calendars off.
Yea is a right pain, fiddled round with it so much but still can't get it to work
uGo check your iGo?
I had that problem and found it was iGo set to an incorrect time zone, so each time I started the program it changed the time.
- Jeff
sammiebreezes said:
Hey All, I've have recently flashed Touch-it V4 to my Xperia, but now the clock keeps on randomly changing the time on me. Usually puts it out by an hour, or sometimes 15mins. I've tried putting day light savings time on, selecting my city etc but still randomly changes the time on me.
Also noticed if I set my country, it will randomly change itself as well. Eg. set it to New Zealand, then go back and check and it will be on Fiji??
Anyone know how to fix this?
Is super annoying as messes up my alarms & appointments, nearly missed my flight the other day.
Cheers
Click to expand...
Click to collapse
I had this problem, it was so anoying with syncing
go to the "settings">select "phone">select the "time zone" tab, and untick automaticly change timezone or whatever.
I have a htc diamond, but should be similar/same as they both WM
dirran said:
I had this problem, it was so anoying with syncing
go to the "settings">select "phone">select the "time zone" tab, and untick automaticly change timezone or whatever.
I have a htc diamond, but should be similar/same as they both WM
Click to expand...
Click to collapse
Thanks but mine was alredy unticked?
jbcross said:
I had that problem and found it was iGo set to an incorrect time zone, so each time I started the program it changed the time.
- Jeff
Click to expand...
Click to collapse
Where do i find iGo ? Never heard of that
sammiebreezes said:
Thanks but mine was alredy unticked?
Click to expand...
Click to collapse
try ticking the check mark...it worked for mee and then soft reset
I'm fairly certain it's a TF3D bug and whether or not that option is ticked won't make a difference. If you live in a time zone where they observe daylight savings, touching the time on the TF3D home tab will change your time zone to one that's 1 hour behind. If you go back into your clock settings and set it to the correct time zone, it'll be ok until the next time you press the clock in TF3D.
So the short term solution is to never press the time =)
SMS timestamp too
I'm using Touch-It 4.0 II.
I'm also experiencing my time shifting by an hour and that my system clock and alarm settings keeps resetting itself back to Bogota, Lima.
Also, my incoming text messages' timestamp is now always 5 hrs in the past.
Is the clock setting from Touchflo 3D supposed to be aligned with the system clock and alarm settings?
Got the same problem before. Able to fix it by making sure the time settings on my computer where i actively sync my phone are the same. That is time, date, time zone, and if DST settings are checked or not.
dgee said:
I'm using Touch-It 4.0 II.
I'm also experiencing my time shifting by an hour and that my system clock and alarm settings keeps resetting itself back to Bogota, Lima.
Also, my incoming text messages' timestamp is now always 5 hrs in the past.
Is the clock setting from Touchflo 3D supposed to be aligned with the system clock and alarm settings?
Click to expand...
Click to collapse
Just noticed I get hte msn time stamp problem as well, really random though
ERWIN CENIZA said:
Got the same problem before. Able to fix it by making sure the time settings on my computer where i actively sync my phone are the same. That is time, date, time zone, and if DST settings are checked or not.
Click to expand...
Click to collapse
Is def a problem with touchflow, flashed generic rom back & now phone is working fine again
+1 on this...
Time zone
I read somewhere that the reason text messages were coming in 5 hrs off was that the Rogers tower was doing its own 5 hr timezone offset on the messages so I ended up getting messages with a timestamp of 5 hrs ago. But I never experienced this problem on my Vox so I don't know. I haven't tried to reflash my ROM to a generic and receive text messages either.
Did anyone else notice this SMS timestamp problem only after flashing to a touchflo 3d rom?
Anyone know if this is fixed in touchflow ver 5? Never had the problem with v3
try not to run any navigation apps..i found out my garmin always changing my time every timr i start the apps..
I ad the same problem
In settings of my navigation (Polish AutoMapa) i can turn off synchronization of my time with gps. (sry 4 my english)
So I have been using my phones as an alarm clock for many many years now. I do it the same way every night. I go into the alarms and change the time and press save. BUT with my 2.2 update, instead of saving for the next day, it saves the alarm as that time but a week away. Its like the day counter doesn't move. I almost missed class this morning because I forgot to move the day I needed the alarm for so I woke up to no alarm 10 minutes before class and seeing my alarm set for next Tuesday.
Anyway...am I missing something?? Or is this a but that others have noticed. It is hard to remember to set the day when I have never had to do this before.
Sent from my SAMSUNG-SGH-I897 using XDA App
Same with me, seems the clock got messed up with 2.2. The day doesn't change when I choose the alarm. Also, it's happened before where I have the right day (it says alarm will go off in 8hrs etc.) but when I wake up the alarm is still set, but now for 7 days from now... It is very annoying, and I can't rely on it now.
So when you created the alarm, did you set the alarm repeat to be daily? Just a thought otherwise the default is a one-time event and when you resave it will bump a week.
i dont want it as a daily alarm...if i go in and set the alarm time, and press save, it should update the day also. It has been that way for years of setting alarms on many different phones, and now that i updated to 2.2 it doesn't update the day. Why would i want to set an alarm for a week away? haha
You don't make it active on the days you don't want it. A one-time event sees that the time is past and makes it a week later. Don't ask me, complain to the coder. lol
Justinph5 said:
Same with me, seems the clock got messed up with 2.2. The day doesn't change when I choose the alarm. Also, it's happened before where I have the right day (it says alarm will go off in 8hrs etc.) but when I wake up the alarm is still set, but now for 7 days from now... It is very annoying, and I can't rely on it now.
Click to expand...
Click to collapse
and yes...these are the exact problems i have, except mine has gone off the days i set the day corerctly, it has yet to NOT go off if i set the day correctly.
cappysw10 said:
You don't make it active on the days you don't want it. A one-time event sees that the time is past and makes it a week later. Don't ask me, complain to the coder. lol
Click to expand...
Click to collapse
a one time alarm on 2.1 worked perfect and exactly as expected. I shouldn't have to make a new one-time alarm OR change the day OR set it as a daily. I wake up at different times almost everyday. No offense, but i don't need instructions on how to set up my alarm!
i know how it works and how it should work, i'm asking if anyone else is having the problem.
I dont have this problem.
I do have a related problem. Its called a job. And I use my phone as my alarm to wake up every weekday morning at the same time. my alarm works great. Since I do not use it for a one-time alarm, it must have something to do with that.
Pirateghost said:
I dont have this problem.
I do have a related problem. Its called a job. And I use my phone as my alarm to wake up every weekday morning at the same time. my alarm works great. Since I do not use it for a one-time alarm, it must have something to do with that.
Click to expand...
Click to collapse
cool man
Here's a description of the change:
On 2.1, clicking on a past "one time alarm" would change the day automatically to the following day, so the alarm worked for the morning you activated it on.
On 2.2, clicking on a past "one time alarm" won't change the day automatically to the following day, so the alarms' day must be set manually for the next morning.
Anyways, does someone have the 2.1 clock apk that they can upload here that we could try, and see if that's the problem?
This does not seem to be an across the board issue. Im one that does not have the issue.
Justinph5 said:
Here's a description of the change:
On 2.1, clicking on a past "one time alarm" would change the day automatically to the following day, so the alarm worked for the morning you activated it on.
On 2.2, clicking on a past "one time alarm" won't change the day automatically to the following day, so the alarms' day must be set manually for the next morning.
Anyways, does someone have the 2.1 clock apk that they can upload here that we could try, and see if that's the problem?
Click to expand...
Click to collapse
I flashed back to JH7 today. Posted for your amusement!
Ehh, the 2.1 Clock doesn't work with 2.2 from just replacing it, oh well... Maybe they'll fix it with the final build.
Justinph5 said:
Ehh, the 2.1 Clock doesn't work with 2.2 from just replacing it, oh well... Maybe they'll fix it with the final build.
Click to expand...
Click to collapse
Figured as much, system apps have to be different. Worth a try!
Hi all,
My alarm keeps going off at the same time even though I've turned it off. I'm the clock settings all alarms are off. I think an old alarm might have been restored drum backup from my Samsung account when I first got the phone. Is there a way to disable the rogue alarm. Please help as I really don't want to factory reset the phone.
Thanks!!
Can anyone help with this. I reset all settings and it still goes off.
Did you try to just clear the data and cache of the Clock/Alarm app and start over again with the app?
eyeatoma said:
Hi all,
My alarm keeps going off at the same time even though I've turned it off. I'm the clock settings all alarms are off. I think an old alarm might have been restored drum backup from my Samsung account when I first got the phone. Is there a way to disable the rogue alarm. Please help as I really don't want to factory reset the phone.
Thanks!!
Click to expand...
Click to collapse
Does the alarm provide any context? Like what it's for? Can you take a screenshot next time it goes off? Also, go to recent apps as soon as you snooze the alarm and see what process called the alarm. If it's the clock app, you have to dig into it and find the alarm.
Next time the alsrm goes off, don't dismiss it. Snooze it instead and try finding the process that triggered it.
Give us some more info brother, so we can try to figure this out...
it should go away after you clear cache and data for the clock app
Maybe it's a different clock app. See if you've installed another one
eyeatoma said:
Can anyone help with this. I reset all settings and it still goes off.
Click to expand...
Click to collapse
same here can anything be done?
seancannery88 said:
same here can anything be done?
Click to expand...
Click to collapse
You have a ghost alarm too?
Hi all,
My alarm continues going off at the equal time despite the fact that i've grew to become it off. I'm the clock settings all alarms are off. I suppose an antique alarm could haveKodi nox been restored drum backup from my Samsung account after I first were given the smartphone. Is there a way to disable the rogue alarm. Please assist as I absolutely do not want to manufacturing facility reset the telephone.
Thanks!!
Mine does this, but with work.. At least 5 of them go off at around 6am... lol. Jokes aside though.
Have you guys checked your calendar app? Maybe you've accidentally set an event that goes off every day? Or something went wrong with the Google/Samsung account sync or whatever its called and its created an event for every day.
A good choice is the Wooden Digital Alarm Clock with Wireless Charging from JALL. The fact that it can set three alarms at once makes me very happy. As a result, I don't have to rely on just one person to set the alarm for my partner and myself.
Clear system cache.
If it persists use Device Care>memory to try to spot it. If you know what time it goes off, hit Clean Now a minute or two before it goes off and see what loads.
SOLVED for me. This was driving me nuts as well. My S20 goes off every 6 a.m. Investigated and it turns out there is this "new" feature called Modes and Routines. Go to Settings > Modes and Routines > Sleep (or other mode set) > Turn on Automatically > Sleep Schedule. Long press the schedule and delete it. You can probably set it for a later time or play around with the sleep settings, but deleting it entirely works.
SOLVED....I was having the same issue, when I got my Galaxy Watch 5 and set my morning alarm for work during the week, some how a 5am alarm got set to go off during the weeknds. I went into settings and then went to modes and routines and turned off the automatic alarm and that fixed the issue