Database Develop

A helping hand needed to upgrade my MDA Vario!

Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!

Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:

Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.

Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.

Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!

if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..

Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!

hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.

Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.

thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.

SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.

Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks

Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.

Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?

Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.

meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.

Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.

I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?

Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?

Never mind ignore me, that'll teach me not to read T-Mobile's site correctly

Can't use my SIM card! Operator not supported problem!

Hi, I've updated my Trinity with this ROM.
All works fine, except that it doesn't work with my SIM card.
When I insert the SIM card, I got a message and the Network Wizard:"Your current operator (23433) is not supported. You should obtain an update from your device vendor.
Would you like to select another network provider?
Basically I can't connect to the network and the network wizard gave me only asian and australian operator I can choose from, but I'm on Orange and in UK!!
Please let me know what's wrong!
Cheers

You sure it doesn't work when you wait a while? It should work telephony-wise, but the data settings you have to change manually...

just doesn't accept Orange SIM cards..
Can't understand why...maybe has a lock when you insert an Orange SIM?

Orange simcards
Hi gioazz,
I bought an m700 from you on ebay ( dezlatics )and have found it to work great, but I am eager to use the GPS option with it.
But just a quick note on your issue....
I have now installed an Orange 3g Pay as you go simcard with no problems.
However, I did originally buy a simcard and have problems connecting to the internet. I rang Orange customer services and they told me that the simcard was only a 2G simcard and that it was not compatible with the m700. So I then bought a 3G simcard and everything is sorted.
So perhaps you are trying to use a 2G card and not a 3G card??
Could you possibly send me any info on the GPS rom update that you have installed and tell me how to check if my m700 is locked or unlocked.
Cheers mate!

My Sim Card is 3G but it doesn't work with any Orange SIM...I think that this is simply a faulty phone.
As for the GPS ROM, just download the ROM from the FTP it works great, and if your already works with an Orange SIM I think it will still working.
I've tried to revert to an old ROM and the nproblem is still there so I think is just the phone.
It does works with any other phone SIM so far,so I think is simply an Orange lock on this device...

'FTP' - What is this?
Thanks for your reply gioazz,
But because I am a bit of a newbie on this site, could you tell me what the 'ftp' is please. Where I can look for the ROM update.
My apologies if this is such a stupid question!

mikehockenballs said:
But because I am a bit of a newbie on this site, could you tell me what the 'ftp' is please. Where I can look for the ROM update.
My apologies if this is such a stupid question!
Click to expand...
Click to collapse
First of all - great username!
Second of all, ftp (file transfer protocol) is where you are going to find the stockpile of roms and other files the esteemed members of this forum have compiled from around the world. Here's a link to the trinity rom page:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Good luck with the update...I see in another post of yours you already CID unlocked your phone.

How Do I Know If My Device Is Unlocked?
Thanks for your reply PSARGENT,
Yes I unlocked my Trinity with the IMEI unlocking service, it cost me £20.00 but I think it will be worth it in the long run.
But how can I test that my device is unlocked and will stay unlocked even after I upgrade using the GPS ROM update?
Is there a quick to tell, or do I have to try and install software that is not digitally signed to find out, Also, I do not have any other carriers simcards to try in my Trinity either.
Cheers!
Still no sign of the Official GPS ROM Update from HTC!!!
Sorry for the double posting!!
I did not read your reply to my post in the other Trinity section of the site, my apologies psargent!

Solution
Do Hardreset,
After you finish the initial phase, do hard reset before it installs the DOPOD software (the 3 seconds countdown) and your sim will work fine.
Nadavi

assasins said:
Do Hardreset,
After you finish the initial phase, do hard reset before it installs the DOPOD software (the 3 seconds countdown) and your sim will work fine.
Nadavi
Click to expand...
Click to collapse
After you finish the initial phase, do _SOFT_ reset before it installs the DOPOD software

anonimo said:
After you finish the initial phase, do _SOFT_ reset before it installs the DOPOD software
Click to expand...
Click to collapse
Thats right
worked for me .
Nadavi

Please Help Me ! SPV M700 GPS no longer works

Hi - I have an Orange SPV M700, and i just used the sim unlocker from this site to sim unlock
the sim unlock process has worked, and i can now use my tmobile sim in the phone.
HOWEVER, the GPS function on the phone is no longer working. TOMTOM 6 worked with the internal GPS before i sim unlocked - but now, it keeps saying "No GPS Device"
Could anyone PLEASE help me to get GPS function (and whatever else may have got messed up during the process) back to working order.
I am a newbie at all this, so please give me step by step guide as how to sort it out.
I have already tried a hard reset, but no change
i only did sim unlock and not the cid unlock
Thanks

Did you install a new radio ROM after unlocking ?
If not do it, radio roms with GPS works better with GPS than radio ROM without GPS
http://forum.xda-developers.com/showthread.php?p=1250041&highlight=radio#post1250041

hi super sheep - thanx for reply
no, i did not do that, i just selected sim unlock.
looking at the link, there are 2 roms - 1.38 and 1.41 - will any of these change language of my phone?
also do i need to cid unlock the phone to install the rom?
also, how do i intall the rom?
sorry, but im a newbie at this (have 2 start somewhere)!
thanks

i love u sheep!
thanks - waiting for a valid gps signal......
next thing - how can i download all the tmobileuk settings for the spv m700?

http://www.modaco.com/index.php?showtopic=200961
any good to you?
you have to do the work your self though...just one question M700 on tmobile?..... assume you have dumped the Orange SIM card etc? If not Orange have a real good set up page for thier services.

cheers for link - yes, dont use orange sim, tmob web n walk is good stuff.
thanks

Right - now i have another problem....
atfer sim unlocking, i now find that when i try to use with my parrot ck3200 carkit, the m700 only automatically pairs up with it if i soft reset the device...is there any fix to make my bluetooth better and for it to pair without having to soft reset the device?
previously i had mda compact ii and never had any problems with that.
thanks

HTC TyTn II Aussie ROM?

Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?

Can anyone help me??

You're more than likely having issues with the radio that came with the phone. Go to the ROM development forum, read how to unlock, install HardSPL, etc.. and then choose either one of the ROMs that come with a new radio available: NATF, Hyperdragon, Dutty's, etc... or look at one of the threads that show how to install a new radio. I'm not going to make any ROM recommendations, because it's really a matter of personal taste and how the ROM feels to you. For me personally, I've settled on T.i.R vk8 WWE build 19971. And I have radio version 1.58.25.17.

Hey dude,
congrats on the kick-ass new phone.
To help you with your prob, you'll have to signup and login to HTC E-Club for Australia, then download and flash the latest 3 ROM. Its the only way to ensure you have the correct inbuilt three network settings, there was a cab floating around a while back but it didn't include planet3 connectivity - only mobile internet.
look for this one :
HTC TyTN II WM6.1 ROM code for Hutchison ‘3’ Network customers
ROM version: 3.29.861.0
ROM date: 05/15/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
Date: 2008-06-02 Category: ROM Upgrade

I found the ROM development page and the list of radios that relate to the specific ROM's match the ones I already have (note: I already flashed my phone using the one in the link I provided in my first post).
I went and registered for HTC E-Club and went to download the WM6.1 ROM u mentioned Sanchez and when I entered the Serial Number it says the ROM is unsuitable for my phone. Is this because it is NOT an Australian phone?
Would this ROM actually work on my phone and would I be able to get a copy of it from somewhere else?

yeah, its not the actual ROM so much as the stuff Three bundle within that you need.
I'm aka Dr.Nerdlinger on whirlpool, a guy I recommended this to didn't have any problems, seemed to make his US Tilt into an Aussie Three TyTnII.. Havent tried it myself as Im already three branded.
http://www.andrewjstevens.com/2008/06/a-new-att-tytn-ii-tilt-by-htc/
from : whirlpool thread

How did you go Morphio, did that link help out any ?

Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do

Morphio said:
Umm nah, I've also tried a much newer 3.29.861.0 ROM and that didnt help.
I dont know what to do
Click to expand...
Click to collapse
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.

Official 3 ROM
Morphio said:
Firstly...I'm with 3 in Australia
Ok, bought a TYTN II off ebay some months ago now from a Hong Kong dealer (that'll learn me) and it seems to not work with the 3G network here in Australia. The phone is always EDGE roaming and whenever it switches to 3G I can't send or receive SMS messages.
I've done some reading around and found that maybe I need to flash the ROM of the phone to an Australian one so that the phone will work properly. I found a thread on Whirlpool and someone there posted a link to this ROM for another user:
www.mediafire.com/?0jt1cwyx61g
Is that the ROM I want? If so, how do I go about flashing my phone with this ROM to make it work?
Click to expand...
Click to collapse
Dude... found it in seconds on google
Link to the ROM download
http://www.megaupload.com/?d=7J3L5LEE
I have flashed this ROM anytime I've had problems with others and it has always worked.
One question though, did Juvs Network Wizard not find 3 for you or it failed in some other way?
Congrats on your purchase and hope get as much out of it as I have

MaDing2000 said:
I have the latst official shipped TyTnII 3 ROM (WM 6.1) for Australia.
ie:
TyTN II_AUS Hutch_WM6.1_Upgrade_20080602 (may 2008)
Can't recall where I found it. I am fairly certain it was on this site
If you cannot find it through searchLet me know if you still need it.
Click to expand...
Click to collapse
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network

Morphio said:
This is the same one I used (3.29.861.0) and nothing seems to have changed, still doesnt register on 3G network
Click to expand...
Click to collapse
Damn! Sorry...
The ROM I posted the link to doesn't ask me for a "serial" when I've flashed it..
I assume you have run the Connection Setup wizard (Settings > Connections > Connection Setup?
Have you tried to manually enter 3's settings?
Perhaps flash the latest Hyperdragon III http://forum.xda-developers.com/showthread.php?t=397121
It has a suitable radio for Australia and I flashed this recently on a TyTn II purchased in Malaysia and all worked fine (as did the ROM I referred to earlier)

Ok but to flash to that (being a cooked ROM) dont I have to do something before I can flash to that? Is it HardSPL I have to install or something like that?

Yes... Unlock and flash a hard spl...
It is quite easy
Excellent directions here:
http://forum.xda-developers.com/showthread.php?t=356895
I am in no way an expert with these devices but I have had no problem that hasn't been quickly resolved.
perhaps unlocking the phone may resolve your problem with flashing the 3 shipped ROM.... (again, no expert here)

Ok seems this is not gonna work. I've done some reading and apparently the board it to blame for my phone not working properly. Since it was an eBay job (but from a company) I can still get warranty but I have to send overseas to HK.
What do people think, I can buy a new TytnII for $659 and when the old one comes back from warranty I can sell it. Would the new one (if I bought from Australian store) work on 3G?

Unless it's faulty hardware, it shouldn't need a return. Don't spend your cash just yet
Try this new official 3.34.721.2 WWE HTC rom, with 1.70 radio.
Download it, plug your activesync cable in, run the exe file you downloaded - after 20 mins or so, you should have the latest ROM, with built in Aus Three Network detection (assuming you have a legal 3 sim-card)
(ps. it may seem like its stalled while flashing, but just give it time)
Report back if successful

Downloaded and installed last night - doesnt seem to have made any difference
sigh...

Morphio said:
Downloaded and installed last night - doesnt seem to have made any difference
sigh...
Click to expand...
Click to collapse
After Flashing a ROM you should always hard reset the device as well. After all this is done, what versions of the following are showing as being installed: ROM, Radio, SPL (can find the last one in the tri colour boot screen - read the wiki if you need to know how to get to the boot screen)? If all of this is showing correctly and you're still having problems then it's probably something like the sim (just any old sim won't do and it needs to be compatible with the phone). You could try another if you have a spare. When you switched it on, after a minute or so did you get a message popping up asking if you wanted to automatically configure the phone for your networks settings?

Signal Problem - O2 Germany

Hello Everyone,
I know that is a very noob question, but I don't know anymore what to do.
I recently move to Germany and I bring my wizard (bought in Brazil) with me.
My device is CID and SIM unlocked and its running WM 6.1
The problem is, I never get signal!!
I already try all the available radios (2.19, 2.25, 2.69, 2.71 and etc..) and nothing happen!
someone knows if there anything to do for work?
I appreciate all the help.
Thanks in advanced.

no one? no ideias =/

None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?

-MyHTC- said:
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
Click to expand...
Click to collapse
i was not able to find it,
could you please send me a link, or tell me where i can find?
hope that work.

This Radio is from the O2 Xda Minis
And here is link to the ROM

danken schön!
i will try and report!

That is very strange!
i flash the radio and nothing happen.
I start to think that my device is SIM unlock again.
But the most strange is:
-I put a diferent SIM and my phone start normaly look for signal but couldn't find it.
-The Invalid SIM screen for type code don't show anymore
-When i read my device on Wizard service tool its show SIM LOCKED.
-But in Brazil i test other operator SIM a long time ago and works.
Any ideia?????

damed! i cannot find a solution...
anyone? any ideia?

I had the same Problem, I live in Germany and have the XDA mini S too, but it's a Vodafone SIM-Card inside. When I installed WM6 the Phone always got a bad connection to the network, and it took much longer even to connect than with the original GERMAN ROM from O2. I downloaded the original ROM from O2s german Website and flashed it with the tool which was in the downloaded file, I didn't extract it from the installer because my Phone was CID-locked. Then the Phone had very good connection again. Then I CID-unlocked it and flashed the newest release of TNT. I expected bad connection again but NO, the Phone behaves like with the original ROM.
XDA mini S german ROM:
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
My Phone is a G4, so I used this tool to unlock:
http://forum.xda-developers.com/showthread.php?t=332320
Then I flashed this ROM (Professional Edition):
http://forum.xda-developers.com/showthread.php?t=414518
I used ROMUpdateUtility_Wizard_NoID.zip for that:
http://forum.xda-developers.com/showthread.php?t=291215
Everything seems to be normal again. I described every detail because I am not really sure what the EXACT problem was because there are so many ways to do the same thing, but i don't know if every method REALLY DOES EXACTLY the same thing, if you know what i mean

wow! thats really strange! but i will try it!

i cannot beleave but works!!
thank you!