hey i just upgaded to 6.1 boots up and works but eveytime i take out the batt i get no service after it starts. and there are no numbers were the R and G are at the boot screen it only works when i do a hard reset evrytime i take out the batt
thats completly normal buddy , it happens to all of us, just restart your BA and your gsm module will start normaly.
Best regards
Vitto
sry for the double post
It happens to me also whenever I removed the battery, to resolved this just push the soft reset button to turn it on whenever you removed the battery.
Related
last night i upgraded my mda vario (wizard) with a new updated rom..while the phone where updating its seem to be stuck at 70% after that the menu that was showing from the update dissapeerd..i could only see my desktop and nothing els, zo i disconnected the device from the usb at 70% to try it again..so i rebooted the phone and thats where the ****s started to happen..because my phone wont turn on anymore it wont even show the bootloader, or the green or red light..it jus seems dead ..anyone got any idee how i can get it to turn on again...
thank you
Try to start the phone in bootloarer. Hold the camera button while turning on, hold camera button until you get the tri colored screen. Then flash T-mobil 2.26 or the Cingular rom. If the phone doesn't start that way pull the battery out for a while.
You can also hold in the reset button for 10 seconds and then hold the camera button, and press power
i tried all of that allready it jus wont start or go in bootloader screen,nothing happends at all ,.no lights nothin..it jus seems like its bricked..but before the flash of the new rom everything where jus fine..
sounds like a half way flash with dead battery. You may try your luck on a charged battery.
Hi,
I wonder if I'm the only one having this issue...
sometimes, after a call, the phone freezes and I have to press the Home key to get the TF3D screen back.
But after that, I can't make a new call... nothing happens when I press the "Call" button or when I try to launch the dialer by pressing on the "Phone" soft button.
I try to launch the FdcSoft TaskMgr (wm2005_3.1) in order to see if a process was stuck, it usually loads fast but in this case, it stops loading and nothing was displayed... (I'm still able to see the TF3D background instead of TaskMgr).
Only way to recover from it, is to SR the device...
I switch off the device each nights, I would expect more stability, it's not like I'm running it for more than 2 weeks...
This issue always occurs (when it does) after a call or when I press the hard key "End call".
Oh, funny thing... By 3 times, I was also unable to end a call, the call was still running and I had to SR the device to end the call... very nice !
Anyone with this issue or with an idea ?
It's the only thing that drives me crazy with this phone :|
Rom : 1.93
radio : BS14 currently, but it was the same with previous radios.
is there anybody with a little clue for me ?
Please
Me too.
Panosha: 1.93.405.1 WWE Shine On 2.4 Full
Radio: 1.03.25.18
After calls... Freezes 80% or more. I don't know if maybe it is 100% of the time when the other end hangs up first. (I don't get it with Voicemail!)
I also get freezes some other times. I don't think it is memory related, (before someone suggests it.) Also Please don't tell me to Hard Reset. I have Hard resetted to my heart's content, also directly after every Rom Update (to get GPS working)
try soft reset......i also got that problem....i do a soft reset,works fine...
cheers!?!!!
hello, i have got a problem with my kaiser, it is tuning off (entering in standby) in 10 s no matter the config than i make
thanks a lot
Oddly enough, I'm having exactly the same problem.
No matter what is running, even apps that are supposed to keep the device from entering sleep (like TomTom, etc.), it always enters sleep after about 10 seconds. What's weird too, is that if I press any physical button on the phone, it resumes from "Sleep" instead of having to push only the power button like you would normally do.
Any suggestions would be appreciated, I have a "AT&T Tilt" Kaiser, and am running a 6.5 rom w/ the eMobile radio.
Hello bro
i found a semi-solution hehehe
starting de audio manager and let it play a part of a music, after that it dont solve all problem but reduce it, some times the kaiser turn off after 2 min as the setting, some times it turn off in 10s
the most strange thing is than the pda never have this problem until today in morning
my rom is a pda-corner wm6,1
thanks
Don't know if it the same problem...
Hi guys got a kaiser bout a month ago and i love the phone haven't done any modifications to it all stock at&t stuff. Having a pretty unpleasant problem... when i go to turn on the phone the at&t logo pops up and then after a couple of seconds turns off, the battery is charged! I seem to be able to turn it on if i open the sim card door and leave it open till the WM6.1 logo appears, but then when i turn it off to put in sim card it turns off in seconds and does not come on. Now when it does happen to stay on for me after its been asleep for a while the touch screen stops working...
all stock kaiser
have done may hard and soft resets nothing seems to be working
don't have sync software
willing to do anything
HELP!!!
maybe you can put a modificated rom, my sotck phone come with wi-fi, internet and e-mail blocked. i put a modificated rom and it unlock all features. its just a try, but dont forget to read all the wiki about the replacement of the rom or you can brick you phone
good luck
i'm also looking for how to change this as tomtom on the move in the car is useless when the phone locks
1.) I changed new rom
2.)It freezes when i was using youtube panel
3.)I turned off and when i turn on again wont load
4.) I tried hard reset , taking out the battery and memory card still wont load
5.) couldn't connect to pc
anyone know how to fix ?
well i had the same issue few moments ago. but now i get rid of it by using a very easy method.
- While the phone is off -hold down the front left and right buttons on the X1 and insert your stylus into the soft reset hole all at the same time.
- After i did this i was presented with a blue screen that told me to press R to reset and delete all my existing stuff. Then i had to callibrate the stylus and the same stuff the day you got it.
I tried that way too, after it said restart i pressed spacebar to restart and its still stuck at loading screen...
you press R... not space
poetryrocksalot said:
you press R... not space
Click to expand...
Click to collapse
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Sorry for my bad english , but it did restarted after pressing the spacebar but it still freezes for some reason and ive done like 5`6 hard reseting it ;/
harveydent said:
R to hard reset, SPACE to restart.
If the phone has finished its hard reset (it's telling you to press SPACE) and you can't just remove the battery and turn the phone on. Maybe your keyboard is dirty and it's not reading the SPA.CEBAR presses
OT: hey poetry, where'd you been? did you sell your X1?
Click to expand...
Click to collapse
yes I sold my X1. I wanted to try out the Nokia E90, and my X1 was in such a bad shape that I had to sell it before it lost value.
i know this is old post, but i have that problem now, any solution.
i changed my rom 20x till now but now stack on XPERIA logo, soft reset hard reset not working, any help....
solved. entered boot loader, three color screen, run task 29 utility 8-12 times, every time connected disconnected usb cable, removed inserted battery and then suddenly update progres was shown on phone. huh. flashing my X1 was easy till today. Good luck to all...
Hi, I'm new to XDA Dveloper. sorry if its already questioned..I don't have time to search for them, I'm running my laptop on battery that only will last about 15 minutes..and I have my electricity out..
Yesterday, I got My diamond exposed to water...it was raining hard and I was on my bike with my diamond in my pocket..
when I got home, my diamond begin to act strangely, it keeps lower its volume(to vibrate state) when I try to press the increase volume rocker, it goes back down to vibrate. but I manage to shut it down with slide2shutdown...and charge it (the battery only 7% left). this morning I get up and switch on the diamond, but It doesn't boot like usual(theTOUCHDiamond sceen)...
it only shows 4 bars (RED, GREEN, BLUE, and WHITE)consist of:
RED BAR with this:
DIAM100 64M
SPL-1.37.Olinex
MicroP-Diam (LED) v11
GREEN Bar with:
PSOC-Diam Stage_PVT v0x30
BLUE Bar : blank
WHITE Bar with
Serial (only "serial is written, nothing more)
That all, and when I try to connect with USB cable, it demands Qualcomm CDMA Drivers...(I use My friend's laptop....no activesync installed)
anyhelp would be appreciated.
thanks
Its strange..., Now my phone could boot normally, but the volume control still error..it keep decreasing( i tried to increase it but it keep getting back to 'vibrate' is this becaus the water?
EDIT: I'm sorry...its still the same, if I restart the device..it shows the 4 colored bars screen again. when I try to reset it, 1 of 10 attempts is likely that diamond boot normally..but the volume error is still there...can sum1 help me?
PS: Sorry, I don't know that I could edit my post..
bellsprout said:
Its strange..., Now my phone could boot normally, but the volume control still error..it keep decreasing( i tried to increase it but it keep getting back to 'vibrate' is this becaus the water?
EDIT: I'm sorry...its still the same, if I restart the device..it shows the 4 colored bars screen again. when I try to reset it, 1 of 10 attempts is likely that diamond boot normally..but the volume error is still there...can sum1 help me?
PS: Sorry, I don't know that I could edit my post..
Click to expand...
Click to collapse
what are you trying to hardreset device..??
A hard reset should only be performed if a normal reset does not solve a system
problem. After a hard reset, the device is restored to its default settings—
the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
Try flashing back to stock rom?
Sent from my GT-P1000 using XDA App
Hi!
I have a boot problem also.
I used Memo ROM about 1 month ago. That was worked well still today. I restarted my Diamond today, it was not boot correctly. Only reboot the phone after showing the ROM information. I made hard reset and put back the rom again, but the phone is not boot properly.
Could to help somebody for me?
I solved the problem.
I downloaded the original rom (included with radio rom) from htc.com.
I put the phone to bootloader mode and flashed this original ROM.
After flashing finished, my diamond boot to WM6.1.
I don't know what was the problem, but it works again...
I hope never happening this again!