Related
Hello,
Before my Diamond I had a Motorola v3 Razr. The Razr did give a sms notification every minute or so. When I received a sms, it gives notifications until i read the SMS. The Diamond only flashes the led light. Is it possible to let the Diamond vibrate every 3 minutes or so when there is an unread SMS?
Thnx in advance
Anybody an idear?
settings/personal/sound and notifications/sound (events and notifications on)
settings/personal/sound and notifications/notifications (go look for mms/sms, check "play sound", check "display message on screen", check "vibrate" or choose any combination).
now say thank you and go ...RTFM! (Read The F... Manual) before you post.
i also recommend a search on the forum. don't be lazy...
KukurikU said:
settings/personal/sound and notifications/sound (events and notifications on)
settings/personal/sound and notifications/notifications (go look for mms/sms, check "play sound", check "display message on screen", check "vibrate" or choose any combination).
now say thank you and go ...RTFM! (Read The F... Manual) before you post.
i also recommend a search on the forum. don't be lazy...
Click to expand...
Click to collapse
A bit rude and not even an answer for his question......
He is looking for REPEATED notifications......something SPBPhoneSuite can do for example. There may be other programs out there for the same purpose, don´t know of any freeware, though....
michi123 said:
A bit rude and not even an answer for his question......
He is looking for REPEATED notifications......something SPBPhoneSuite can do for example. There may be other programs out there for the same purpose, don´t know of any freeware, though....
Click to expand...
Click to collapse
1. sorry you think so. don't get it ...what's rude? my 2 last recommendations?
2. the notification stays on the screen until you dismiss it, so why repeat? as a matter of fact i am not so sure it is not repeating...
i do know for sure that reminders do repeat so i can guess that all notifications are repeating.
i think he is looking for repeated sound notifications.
I'm very sorry when i offended some of you with my question, but the last post sums it all up. I'm looking for a repeating sound/vibration notification. I will try SPBPhoneSuite, but i'm not font on installing an whole " heavy" program for such small things. So when there is an alternative...please let me know
http://forum.xda-developers.com/member.php?u=368137Kukuriku - arrogance and rudeness are sometimes difficult to distinguish, but both are bad.
I did a freeware solution - DmsisAlert
Hi, i did a simple application that works on Windows Mobile 5 or superior (.Net CF 3.5 is a requirement).
To download go to DmsisAlert page and click on DmsisAlert link, unzip, tranfer the .cab file and install. If you like (or not), i will appreciate some feedback (you can do that on download page).
With Diamond is a good idea not to use the minimize functionality because after that there is no way to get interface back (allthough it still running on the background). I will work on a solution for that (i'm busy enjoying my new phone ).
hope that can help, helps me a lot
Dan
Hi dmoreira,
I like your thoughts about the program. I tryed it, but it gave an error. Nullexeception or something...
Dmsis Alert - SMS Notification periodic
Rik_X said:
Hi dmoreira,
I like your thoughts about the program. I tryed it, but it gave an error. Nullexeception or something...
Click to expand...
Click to collapse
Thanks for trying... the program requirements are: Windows Mobile 5 or superior and .Net CF 3.5. I tested on WM5 and WM6.1 (Kaiser and Diamond) and run ok for me. Maybe you device are missing some requirement?!
Dan
Rik_X said:
I'm very sorry when i offended some of you with my question, but the last post sums it all up. I'm looking for a repeating sound/vibration notification. I will try SPBPhoneSuite, but i'm not font on installing an whole " heavy" program for such small things. So when there is an alternative...please let me know
Click to expand...
Click to collapse
Dude, try Best Reminder:
http://best-reminder.en.softonic.com/pocketpc
It ain't freeware, but its light and does the job perfectly every time.
I did use SPB phonesuite before, and I found it heavy with other features I don't need. Also, the damn thing didn't work at times!
try this http://forum.xda-developers.com/showthread.php?t=405071&highlight=sms+reminder+vibrate
and free, always check the 'Development and Hacking' forum
@dmoreira: What requirement can that be? I have an stock diamond, with latest romupdate en .Net CF 3.5?
@MasK: That's i very nice program. I tested it, and it does the job except for the vibrating!
@badaas: That's another very nice program. I also tested this one and it works perfect. Except that it turns on the screen with every reminder... And you have to reboot the device to configurate it again...
Rik_X said:
@dmoreira: What requirement can that be? I have an stock diamond, with latest romupdate en .Net CF 3.5?
Click to expand...
Click to collapse
Sorry, a made some fix in some peace of code that depending of device could rise exception and i think the problem was solved.
I'm attaching the application here to let things easier.
Dan
Rik_X said:
@MasK: That's i very nice program. I tested it, and it does the job except for the vibrating!
Click to expand...
Click to collapse
Yea.. I know.. but it's ok for me. If yr phone is in silent mode, it vibrates instead.
dmoreira said:
Sorry, a made some fix in some peace of code that depending of device could rise exception and i think the problem was solved.
Dan
Click to expand...
Click to collapse
Ok it works just fine! Very nice program! But if i can say 3 things about it:
- The minimize function still doesn't work to well
- You cannot delete the program via the "delete programs" way
- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?
thnx!
Rik_X said:
Ok it works just fine! Very nice program! But if i can say 3 things about it:
- The minimize function still doesn't work to well
- You cannot delete the program via the "delete programs" way
- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?
thnx!
Click to expand...
Click to collapse
before anything thanks for trying my work... about your comments:
"- The minimize function still doesn't work to well" : You're correct, but in others devices without TouchFlo3D the minimize works a lot better. With TouchFlo3D this feature practically doen'st work (i believe that's the same for other applications that have a minimize function that puts an Icon in the Today Screen).
"- You cannot delete the program via the "delete programs" way": A fix for that will be available very soon
"- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?": It's possible but i dont like the result of doing this with the easiest way, so this feature will be available not so soon (but i will adivise here when so).
I will make some changes and post here a new version with some improvements.
Thanks again for trying.
dmoreira said:
"- The minimize function still doesn't work to well" : You're correct, but in others devices without TouchFlo3D the minimize works a lot better. With TouchFlo3D this feature practically doen'st work (i believe that's the same for other applications that have a minimize function that puts an Icon in the Today Screen).
"- You cannot delete the program via the "delete programs" way": A fix for that will be available very soon
"- I really like the phone to not only notify me via sound, but also via vibration? Is this possible?": It's possible but i dont like the result of doing this with the easiest way, so this feature will be available not so soon (but i will adivise here when so).
Click to expand...
Click to collapse
I like testing this program, because it meets almost my exact criteria for such a program! Nice work!
- That minimize function is a pity, but understandable with the TF3D thing!
- Ok if you can fix that 'delete programs' issue, that would be very nice. I don't have a clue how i can properly delete it now!
- I will wait on a fix for the vibrating! That would be very nice!
Keep up the good work!
Thnx!
Dmsis Alert uninstall issue resolved
Rik_X said:
I like testing this program, because it meets almost my exact criteria for such a program! Nice work!
- That minimize function is a pity, but understandable with the TF3D thing!
- Ok if you can fix that 'delete programs' issue, that would be very nice. I don't have a clue how i can properly delete it now!
- I will wait on a fix for the vibrating! That would be very nice!
Keep up the good work!
Thnx!
Click to expand...
Click to collapse
Hi Rik_X, after a lot of work (i posted the issue in different forums, but got no answer) trying finding a correct solution to uninstall and i ended downloading SkTools (i downloaded from here http://www.clickapps.com/download.htm?pvid=1324) and use a feature called Installed Programs and then Dmsis Alert was listed and i was able to uninstall it!! After that i install the version attached here and then the Dmsis Alert will appear again in the Windows Mobile Remove Program list. Sorry about the troubles that error could cause you.
Anyway i'm posting the last version the doesn't have this uninstall issue. I'm also working on the vibrate feature (still looking a direct interop way to do that).
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Can you explain what´s in that cab?
shinobi_uk said:
Hi
I made this little CAB to install the registry tweaks that prevent your screen from blanking. I can confirm that on my Orange Diamond, using Bepe's .97 this actually works, whereas using Advanced Config didn't solve the issue.
The CAB file is uninstallable should you wish to remove it.
Thanks,
Shinobi_UK
Click to expand...
Click to collapse
Nothing new here...
You could also easily do it with Diamond Tweak
MonteCristoffOn said:
Nothing new here...
You could also easily do it with Diamond Tweak
Click to expand...
Click to collapse
Actually i found that using DT didn't work either, and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
horstborsch said:
Can you explain what´s in that cab?
Click to expand...
Click to collapse
Four registry tweaks, and a text file. Nothing sinister.
shinobi_uk said:
Actually i found that using DT didn't work either
Click to expand...
Click to collapse
It works for everybody... even on all bepe's ROMs.
and I also find it more convenient to apply the registry changes with a cab file, rather than having to install an app I don't use and then make a load of clicks.
If you prefer to do it using a tweaking app then this cab isn't for you. The only reason I posted it is because I use it myself.
Click to expand...
Click to collapse
If so, good luck for making cab for each Diamond tweak...
Cheers.
MonteCristoffOn said:
It works for everybody... even on all bepe's ROMs.
Click to expand...
Click to collapse
Well i applied the tweaks and my screen still went blank when calls connected, I'm happy to test it again as I may have been using an older version.
If so, good luck for making cab for each Diamond tweak...
Cheers.
Click to expand...
Click to collapse
Well actually it's been very easy to achieve by taking registry snapshots, and then using diff on a linux box to find the changes, then import them into a cab file.
So thanks for wishing me luck but it's not required.
Sarcasm breeds sarcasm and frankly i'm slightly ammused that on a forum designed to help users share tips and software, a simple CAB i use after new ROM flashes has created such a hostile response.
I'm not attempting to replace or belittle your tool monte, it's certainly streets ahead of what i can do at the moment, however as bepe's ROM lets me run cabs at build this way is nice and easy for me to ensure that if I need to do a hard reset I can reinstate my registry tweaks during the reset without having to install any additional software.
What's so bad about the screen blanking out during a call?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
The registry tweaks in Advanced Config did not work on my phone either, but this cab did the job. Thanks shinobi_uk
THIS is effing amazing
Been looking for something like this for a looong time, cheers
Brilliant, I'd tried the registry tweaks in the tweaks thread, and advancedconfig without any luck and this cab worked perfectly.
I haven't tried DiamondTweak, looks interesting though.
This works perfectly. Big Thanks!
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
Have you tried to dial a requested code with a blank screen?
EXO said:
What's so bad about the screen blanking out during a call?
Click to expand...
Click to collapse
It's not that bad, it just annoys me when I'm phoning numbers where you have a number menu system to get through.
It's strange that it's something no other WM phones I've used have done, yet theres no menu option to disable it.
shinobi_uk said:
I find it annoying to have to unblank the screen to use the keypad for things like phone banking and voicemail.
Click to expand...
Click to collapse
here here...me too
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
If you'll think about it for a moment, during a call we never really need the screen to be active for more than 1 minute or so, from the last time we touched it. If you are calling a digital voice machine (either your voicemail or anything), 99.999% of the time it won't take more than 1 minute between key presses.
The ideal tweak should just make the screen behave like when you're not in a call, meaning the screen reduces brightness after ~30 seconds, and shuts down after ~1 minute. In order to be 100% on the safe side, you could make it shut down after 2 minutes from last key press. BUT, making it never go to sleep is simply a waste of battery if you're doing for example a 30 minutes conversation.
center button and screen back on
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
But i dont think we should discourage anyone from making any kind of cab if they desire.
My preference is to have the screen come on, see who it is, then allow it to go blank. If you need it to come back on, i just push the center of the scroll, enter button or whatever its called, and the screen comes back on. (at least it does on mine) . I like it that the screen blanks so it will save battery.
Click to expand...
Click to collapse
Still, it is unnoying to press that damn key every 5 seconds. The screen should shut down after 1-2 minutes, but NOT never.
Noam23 said:
This CAB file is flawed, because it causes unnecessary battery drain.
It's wrong to make the screen never go to sleep during a phone call.
Click to expand...
Click to collapse
Thats abosolute BS. It is NOT flawed. If you dont want your screen to stay on just - dont use the CAB. I think most users around here are smart enought to know that keeping the screen on during a call takes a battery hit. If they use the CAB as I intend to they are willing to accept this.
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
u need to install advanced confog tool from Schaps, there is an option to disable device sleep while on call.
CSD connection
The screen also turns itself off when I use a CSD connection for internet access on my device. I assume it's because the phone thinks I'm making a regular phone call, so it turns the display off.
I found that if I load up tomtom in the background, the screen stays on, but after a while, the screen starts to turn itself off for about a second every few seconds, so it has only worked as a temporary solution.
I will give the advanced config tool a try. ty
IDK know about advanced config, but kaiser tweak is a nifty little program to change a lot of settings
Advanced config is just about the same as KaiserTweak.
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
dsoler702 said:
I think kaiser tweak has a few more options now. I had advanced config on a couple of roms i flashed and i think kaiser tweak is a little more encompassing as far and the number of features you can tweak.
Click to expand...
Click to collapse
u should know that Nikagl made some "upgrade" to advanced config tool so it has almost the same tweaks as kaiser tweak.
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
hotdog53 said:
Will someone please tell me how to keep the display ON when making phone calls from my Tilt?
Thanx!
Click to expand...
Click to collapse
jahrami said:
start-settings-battery power (uncheck the box) -but that will make ur screen on even in other apps, when recieved other texts...etc
out of curiosity - why do u need ur screen on?
Click to expand...
Click to collapse
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Get it HERE
hotdog53 said:
I prefer having the screen on regardless where I am. All boxes are unchecked>oower, backlight,etc.
but the damn thing goes off after a few seconds when I make a phone call and the keypad can't be seen to press a number when prompted to do so. When I want the screen off, I use psshutXP (light off)
How can I get the advanced configuration tool?!
Thx!!
Click to expand...
Click to collapse
The advanced config tool should have been the first thing to try. Very helpful app.
Mikulec said:
The advanced config tool should have been the first thing to try. Very helpful app.
Click to expand...
Click to collapse
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
hotdog53 said:
o.k I have the advanced config tlool installed on my kaiser/tilt. What do I do to keep the screen from going off during phone calls?
Thx!
Click to expand...
Click to collapse
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
hotdog53 said:
DISREGARD. I found out how.
Thx everyone!
Click to expand...
Click to collapse
ur welcome.
hotdog53 said:
I found out how, but after disabling phone sleep and fast sleep, the screen still goes off when using the phone. Does anyone have a registry tweak to keep the screen ON when using the phone?!
Thx!
Click to expand...
Click to collapse
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
hotdog53 said:
I found a registry tweak that resolved this issue. It works!!!!
HKLM/Drivers/Built-In/RIL>Enable Fast Dormant Display During Call....Change value from 1 to 0. Soft reset. The display will stay on during a call!
Now I have another issue that a search didn't help. When I'm on the internet and using the stylus to scroll down the page, the scrolling slows down to nearly a stop just a very short ways down the page!!
Can someone pls help me with this?
Thx!
Click to expand...
Click to collapse
Here's a screenshot of the phone stay awake tweak.
Hello, im using miri 8.1 premium and i want to remove the "slide down for more options" when i make a call... is this possible??
+1 i hate it!
+1, i really don't like it
yes! Me too, it is the most useless junk ever thought by the HTC ppl! It is annoying, please someone please help us remove it!
And why don't you ask miri for it in is thread instead opening a new one???
speed200 said:
And why don't you ask miri for it in is thread instead opening a new one???
Click to expand...
Click to collapse
Because its not just in Miri's rom, its in more or less all of them now
I want it back to my ROM badly. where is the cab?
+1
i also do not need it, and would like to know how to turn it off
+1.
Its a pain to mute/un-mute during conf calls with this on.
Anyone?
For those users interested to find a solution to disable the curtain, here is the package. Could be a dll or a registry key.
Found a solution
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
sank27 said:
Found a solution with reg key.
Goto HKLM\Software\HTC\Phone\Cover
There is a DWORD value ResumeInterval set to 5000 (5secs).
I changed it 300000 (5mins) and soft-reset.
Now the call starts with slider on, you only need to slide down once. Then it will wait for 5 mins of inactivity to come back up.
Probably higher values can be used, but 5mins should work for me.
As always, modify registry at your own risk...
Click to expand...
Click to collapse
Maybe you can set it to 0 (zero) to disable it?
kwbr said:
Maybe you can set it to 0 (zero) to disable it?
Click to expand...
Click to collapse
i tried that actually but it still show up
i also tried to delete the whole key "cover"
no luck
solaris10 said:
I want it back to my ROM badly. where is the cab?
Click to expand...
Click to collapse
Me too. any cab availabale?
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
homer285 said:
I must admit the Topaz dialer (as nice as it may look) sux! What was wrong with the standard HTC HD dialer? it supported landscape and was functional.
Click to expand...
Click to collapse
contact managment sux on the standard one
and in-call options are better on the new ones
tiburone said:
nothing wrong with it. just when i call, i press the phone with my face and something happens in middle - hang down, second call and so on...
Click to expand...
Click to collapse
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
Click to expand...
Click to collapse
I had zero issue with the standard one, it was functional and did exactly as one would expect. Topaz dialer hides all options instantly making it absolutely dangerous to try and activate loudspeaker whilst driving . The other issue is landscape view, if using any rotate screen app and having the device in landscape (ie. whilst using GPS apps etc) and receiving a call there is no dialer shown at all!
Surely I am not the only one to notice these problems?
thanks man it helped
Sir.B said:
contact managment sux on the standard one
and in-call options are better on the new ones
i assume you like the curtain and i'm glad for you, others don't
maybe we use this and just don't need an extra step of protection
and we want to find a way to turn it off
Click to expand...
Click to collapse
thank's. I'll try that - it looks ok.
But no i have a problem - remove the curtain...
Good afternoon!
I've tried to ask these question on other forums, but almost nobody gave me an answer. There were some about different software to use, but it didn't really help. So I would be very pleased if you, dear X1 gurus, answer these question. Please, if you know the answer - write it here for me and other people. Thank you very much in advance!
The priority is: I. How to solve the problem using native software or registry? II. If and only if the first is not possible, how to solve it using different software?
1. Where in file system the vocabulary of words which were inputted before is situated? It's a vocabulary with these tooltips-words while typing. Can I get it somewhere form my phone and backup or even edit?
2. How can I check my X1 uptime?
A: As yet I know only one way: use AEButton Plus. You can correct or supplement this opinion(and please do it) if you know more on that.
3. Someone called me from number +ХХХ, I want to call him back, BUT to add a zero between + and the first digit(+0XXX). How can I do it? I can't copy this number and there is no options like "change then dial". The one and only solution for it - is to choose "send SMS" and copy the number from the "From" field! But is it useful and normal for a device which costs about 500 euro?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
4. Imagine: you have a contact Ivan in your contacts, which has 2 phone numbers: mobile and work. Two sms arrive to your phone: one is from his home number, another is from work. Sms inbox displays both of it as "Ivan". How do I know which sms is sent from what number?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
5. How can I copy a number which was dialed earlier or number from contacts? I see only one way(but it's weird): chose "edit contact" and copy from the field. Is there another way?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
6. While a phone conversation how can I easily save a number which my friend is saying to me? I tried to dial it while a call is active, it's ok, but once the call is dropped, my number disappears! Yes, I can create a note using a special touch-key, but it's not useful, because I should use my keypad and then should copy that number, but I need to dial it! How can it be solved?
7. Have anybody experienced a problem while taking a photo of many different objects? I had. It happened when I took a photo of a forest - there were a lot of trees alongside each other and after pressing shot button, "Saving..." was displayed on my screen for about 15 minutes! After it said that it failed to take a photo. What it can be?
8. Where can I find all my earlier connected WiFi points and passwords? I want to save it before upgrading my firmware. Can I backup it?
9. Can I turn of a feature of turning my screen light on when I plugging my X1 to PC? I don't want this light to be turning on when I do it! Is it possible?
10. While surfing internet via GPRS/EDGE or getting my email from server, my GSM part of device seems to be "unconsciousness": when somebody calls me, I'm "out of zone". How can I fix it? I want my GSM part to be number 1 by priority!
11. I can see anything when the sun is shining. I know everybody with X1 can't. But can I "ask" my backlight to help me? For example, set it to turn maximum power when on the light, or something? I'm asking because, as I've understood, my auto-backlight works vice versa: when it's bright - it turns off, when it's dark - it turns its max power. I want max power when it's very bright too!
A: People say that screen protector with anti-glare really helps.
12. When an SMS is coming, I get a popup notification at the bottom of the screen. I can either press "Reply" or "Options". If I press reply, the chat mode opens and I can reply, seeing all our conversation. BUT if I go to my address book and choose "New SMS" on a contact, different form will be opened, just like for e-mail composing. And here is a question: how can I make this "e-mail composing" style sms appearing after I press "Reply" when new sms arrived? I know how to turn the chat mode off, but I don't need it to be turned off completely, because it's useful while reading sms from one person. I just want reply to a person using simple form. Is it possible somehow? I think that if it's can be made by hands(New sms from contacts), then it could be implemented programmatically... maybe some values in registry?
A: As yet I know only one way: use Inesoft PhoneEx. You can correct or supplement this opinion(and please do it) if you know more on that.
13. At the screens you can see screenshots from my X1 with R2A0010 and 1.14 radio: 1 hour after powering on and 2 days after powering on. Why there is such a difference in memory consumption in some system processes? Is it an ordinary thing?
A: People say that it's normal. You can correct or supplement this opinion(and please do it) if you know more on that.
Thank you very much in advance again!
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
#5, go to call log in the phone dialer and there is a menu option to save to contacts. If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
PhoneX can do these two.
WhyBe said:
Great questions, especially #6. I can't answer any of them exept #5, so I'll have to watch this thread along with you!
Click to expand...
Click to collapse
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
WhyBe said:
#5, go to call log in the phone dialer and there is a menu option to save to contacts.
Click to expand...
Click to collapse
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
WhyBe said:
If you want to save it to a pre-existing contact....you will have to add a question #14 to your list
Click to expand...
Click to collapse
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
VNMenIeu said:
PhoneX can do these two.
Click to expand...
Click to collapse
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
BRING ON THE QUESTIONS!!!!!!!!!
1 - I don't know.
2 - AEB Button Plus has such a feature.
3, 4, 5, 6, 12 - I use PhoneEx sorry.
7 - Never heard of it. Upgrade your device to R3A and try again.
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
10 - Never had that problem. Are you using a custom ROM?
11 - I can see the screen very good in the sun, because I use a screen protector with anti-glare. Buy one and be amazed.
13 - It is normal.
J-Pro said:
Thank you. I'm sure there are a lot of people, who would like to know these answers too... I hope that there are people here on xda-developers forum, who knows needed answers...
It's almost the same solution I offered for existing contact(edit contact and copy number from there). Maybe it's possible somehow to add in menu "Copy number"? (or I just have too much hope)
I don't know how about you, but when I choose "Save to contacts", it opens all contacts + "New contact" list...
Thanks for your answer. Yes, it can, just as Inesoft Phone. I've installed both of it. And then removed both in the same day. IMHO, they add some good design, but hardly can pretend on a lot more useful then original dialer. (Just for future messages, to have this thread clean, I say to myself and others(for the off-chance): I would not want to discuss any soft here, so please, let it be only tries to answer to these questions... thank you in advance)
Click to expand...
Click to collapse
PhoneEX is way more useful than org. dialer
orelsi said:
BRING ON THE QUESTIONS!!!!!!!!!
...
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
I've been using the PhoneEx trial for a few days and it doesn't do #5 and #6. If any workaround involves tons of keypresses and program changing (during the call) to accomplish, then it fails. I think the OP is looking for a quick way of accomplishing these things during a call. Going to the notes application during a call only partly works. In order to actually use that number you may have jotted down in notes, you have to find the file and call the number from the notes file...not very elegant. There should be a means of jotting down numbers while in the dialer (without sending out tones causing your voicemail to go crazy) so that you may call or save them during or afterwards.
Also, I may be wrong but, how do you add additional numbers to a contact without copying and then going into edit contact then pasting? For example, how do you add a home number to a contact that already has a work number without manually going into edit contact and adding it. There should be a "merge with existing contact" feature within the dialer menus.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
WhyBe said:
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
Click to expand...
Click to collapse
That is your right, but not my problem.
Not bashing PhoneEx, because it is pretty good otherwise. But, I am a stickler for convenience features. I hate tons of button pressing and navigation to accomplish simple things.
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
spikegotti said:
lol so weird, phonex is sooo sexy i open it sometimes just to press the buttons in awe
Click to expand...
Click to collapse
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
orelsi said:
Haha same here. It is super finger friendly and looks so un-WinMo D) like.
Click to expand...
Click to collapse
same...i think it's the most useful app in my fone.
WhyBe said:
I tried to assign the dial pad to the call button, but I just get a dead PhoneEx screen. Is this a limitation of the trial version?
It works when I assign Calls or Contacts, but not the dial pad.
Click to expand...
Click to collapse
Sorry, I can't understand what you want .
J-Pro or others,
what is the task manager in screenshots in first post?
It's not a biult-in one??
orelsi said:
1 - I don't know.
Click to expand...
Click to collapse
Thank you, it really helped me!
orelsi said:
2 - AEB Button Plus has such a feature.
Click to expand...
Click to collapse
Didn't know, thank you.
orelsi said:
3, 4, 5, 6, 12 - I use PhoneEx sorry.
Click to expand...
Click to collapse
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
orelsi said:
9 - Yes. There is a reg tweak, but I can't find it. Someone else should have it.
Click to expand...
Click to collapse
If somebody has it, please, post it here...
orelsi said:
10 - Never had that problem. Are you using a custom ROM?
Click to expand...
Click to collapse
No, my rom is R2A0010 UK WWE.
doministry said:
what is the task manager in screenshots in first post? It's not a biult-in one??
Click to expand...
Click to collapse
It's FdcSoft Task Manager
J-Pro said:
Thank you, it really helped me!
Didn't know, thank you.
Click to expand...
Click to collapse
You are welcome!
Don't be sorry, it's up to you But I would prefer if somebody told me a way to do it without third-party soft...
Click to expand...
Click to collapse
Sorry as in "I use superior product ftw" .
Unfortunatelly the nature of WinMo is that you need to add third party soft most of the time. That's the way it works.
orelsi said:
8 - I believe there is a text file in the Windows folder. I am not 100% sure though.
Click to expand...
Click to collapse
Checked all txt(and other) files in windows folder. There are nothing about wifi settings...
J-Pro said:
It's FdcSoft Task Manager
Click to expand...
Click to collapse
Thank you for help!
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
VNMenIeu said:
If you don't mind I'm asking, why do you want to check your phone uptime? Do you have a time usage restriction or something?
Click to expand...
Click to collapse
Just for fun My work computer can be running for month or so... Sometimes it's interesting for how much your X1 is powered on. For example, if I see any bugs on it, I question myself: "How long does this thing work? Maybe it's time for an SR?". If I found that it's only a day - I would be very curious. And if it's already a week - I do an SR without any additional thoughts That's my answer