Hi!
I just unlocked my Diamond and it went all well.
Then I wanted to install TF3D. I made the mistake that I instead of coping the .CAB file, I copied the files in the .CAB file into the external memoery.
After a hour or two the phone froze. Now when I try to start it, I come to the screen to put my PIN code. I pushes it and then enter.
The phone freezes when it says "Waiting".. and nothing happens.
The buttons stops to work, but when I connect it to USB the buttons starts to work again but the screen is the same.
How can I fix this??
THANKS A LOT!
Related
As I said my (Kaiser) HTC TyTN II is frozen at the Smart Mobility screen and restarts constantly. I have tried soft restart, hard restart and nothing changes. When it happened I had to soft reset my phone after my "Phone in the phone" stopped working proplerly. I hit the soft reset button and the it just freezes in Smart Mobility and then restarts, vibrates, freezes and etc.. Soft restet does not do anyting, hard reset goes through the process of cleaning and reseting and then nothing, the same problem keeps coming up. Does anyone have any ideas?
Can you come in the BOOT? So if you put a ROM on your extern storage (You need to rename the ROM in some kind of word, like by the Hermes, if you wanted to flash from your extern storage you needed to rename it to HERMING.nbh) and flash it with that..
Sounds promising - can you give more precise instructions for the Kaiser please?
How do you get to the bootloader?
What exactly do you name the .nbh file on the storage card to?
Sorry to jump in after so long time but there might be a very easy solution, yopur battery! Now i had se sam problem but mine didt want to even start to boot till you connect him on charger so i did a little experiment with an old trick: put a piece of paper between the battery and the edge of its dock so that battery can be well pressed and real tight in its dock. And it worked!!!!
I have the same probleam.But at first my phone dont charging when it turned on(only when it was turned off) and now when i try to turn it on it show me start display(Windows Mobile) and restarts,restarts,restars...
Bram87 said:
Can you come in the BOOT? So if you put a ROM on your extern storage (You need to rename the ROM in some kind of word, like by the Hermes, if you wanted to flash from your extern storage you needed to rename it to HERMING.nbh) and flash it with that..
Click to expand...
Click to collapse
doesnt help
bubimir13 said:
Sorry to jump in after so long time but there might be a very easy solution, yopur battery! Now i had se sam problem but mine didt want to even start to boot till you connect him on charger so i did a little experiment with an old trick: put a piece of paper between the battery and the edge of its dock so that battery can be well pressed and real tight in its dock. And it worked!!!!
Click to expand...
Click to collapse
doesnt help
Hello guys. I have been searching the forum for over an hour to figure out a way to get my Tilt back up and running to the way it was before. I had almost every updated cab thats out there on my tilt along with the TomTom 6 software which is where the prtoblem occured. Once I installed a cab file called "MN6-update" to my memory card it soft resetted itslef and now all I get is a blank screen. This file was supposed to help redirect the maps that I downloaded for tt6 so the program will be able to read it. After installing this file all my phone does now is load up the AT&T startup animation and then it blanks itself out.
I downloaded mtty 1.42 and am able to see the boot screen and it says usb when I connect it. What do I do next? Any help will be much appreciated.
Does anything on the screen show if you do a hard reset?
When I reset the device I only get the At&t welcome screen (along with the anoyying sound) then.... Death. The screen blanks out and none of the buttons respond.
Update: I just did another reset (By holding the power button for 30 seconds) and a message appeared telling me that a reset is not possible due to a program that was installed from an unrecognizable source. It said that it will automatically restore the phones factory settings and since then it has been stuck on the At&t screen for several minutes. Does this change anything?
The Factory Defaults loaded automatically
Looks like that second reset did the trick. Now all I have to do is load all those cabs again avoiding that last problematic one of course!
Hey,
I had gotten to sample the HTC Touch Diamond...and thats all. I got it as a gift from overseas (so its a GSM -simcard- phone). Long story short, I didn't want to buy the phone from the local wireless provider because I'd be stuck with them. I open up the HTC box, turn on the phone, calibrate, take a few pics, and then I decided to put in a simcard. The phone was on at the time and I wanted to make a few phone calls to test out the new phone. I have no idea what happend, but the phone just turned off. I turn it on, and there is no lights, no screen, however the phone did turn on (i felt the vibration, and heard the startup sound). I took out the battery, and put it back in a couple of times and I finally got to turn on the screen and lights, however i recieved a werid message, and it didnt seem that my buttons at the front were working right (they worked fine before when i took pics and listend to the demo music), so I unplugged the battery and put it back in..Since then I have not been able to turn on my screen.
Here is how I know the phone is on, but there are no lights and no screen:
1. the boot up vibration
2. the bootup music
3. the volume up and down
4. I am able to touch the screen to turn up and down the volume.
5. When I put in a simcard, the phone does a ring every min or so (I have no idea as to the cause as i cant see error messages)
Now this is what I did to try to fix it:
1. I tried soft reset , however pressing the reset button does not seem to make the phone restart as i can turn up and turn down the volume no matter how long i press the reset button
2. I tried a hard reset, that doesnt seem to work either. (btw im guessing the confirmation message screen and pressing the volume up key) I think that the reason why steps 1 and 2 are not working, is because the phone does not seem to want to restart!
3. I tried taking out the battery and putting it back in..but i never did it for longer than a minute
4. I tried to update the rom, however the rom update application gives me a "Connection error" even though i have my phone plugged in. If i am supposed to set the connnection up from the inside then nm i cant do it cuz i cant see a thing.
5. I tried charging the phone (through USB and the power outlet)
Does anyone have any idea what happend? how can HTC Touch Diamond go from new to blank screen in about 5 minutes of usage?
plz give me all suggestions u can come up with...plz try to help me. Ive been waitign 2 years for a good phone, and now that I have one, I cant use it. Help me!
remove the sim card and see if it acts normal.
is it already unlocked?
the sim card has been removed, reinserted , and removed again.. yes the phone is already unlocked as the simcard apparently worked ( i made a phone call and the phone rang)
has no one ever come across my problem?
bumping...
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
This is my first time installing a rom on my Htc vogue from sprint I run "Haret" it goes to the black Linux screen then gets stuck at "attempted to kill init" then says rebooting in 3 seconds but doesn't reboot.
I tried the unlocker and things like that.
If it helps I do not have service on my phone right now (not sure if that has anything to do with the problem)
Also after the unlocker finished and such my lock button no longer works well locks or fall asleep then I cannot "wake it up" without taking out the battery and starting all over again.
Thanks for viewing I really hope you can help me.=[
ps, this is also the first time I ever owned a wm device lol..
-Abyy
-sigh- I just tried the "NAND" method and got stuck at the linux boot screen again so I held the power button and camera button and used the sylus thing and now im stuck and the three colored screen thing..
I really need you guys help =[
im assuming you unlocked your phone if you did not unlock it do not try this.
download this...
forum.xda-developers.com/showthread.php?t=711839
extract it to your computer then...
while on the 3 color screen connect your phone to your computer and it should say "usb" at the bottom.
now the folder you extracted open it and double click the ruu file. agree to everything and it will install windows.(that was a random windows rom) this is just to get your phone working
All figured out! Thanks a lot android runs wonderfully.<3