I've been running WM 6.1 on my Kaiser for over 2 months. WiFi connections were running smoothly - no problems then. But from some time, the phone is just trying to connect, showing finally an error message. The router is Linksys WRT300N. Protected with WPA-PSK2 TKIP.
have you tried connecting to another wifi router? Maybe it's something to do with your router settings.
It connects to unsecured networks. Also, the phone connects when I set a fixed IP, but I can't use internet then. I might turn off the security, but some dicks from the nearby house found my network and were using it - that's why WPA-PSK is turned on.
you may want to try setting your router to mix mode which mean devices with 802.11 g,b, and n can connect. while you may have it on N that may cause the device to not connect to the router.
pije kuba do jakuba
jakub do michala
pijesz ty pije ja
kompanija cala!
lol tez mam na imie kuba
^^(he has the same name as me)
Related
Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.
Hi guys!
I have a Touch Diamond 2. It's great and certainly an upgrade from my Touch Cruise!
I have a strange problem though. Whenever I try to connect through 3G (T-Mobile Netherlands), immediatly after it makes the connection, it gives the dialog 'cannot connect etc'. 3G is truly connected but no data is coming in.
Now I have found where the problem lies, sort of. 3G works fine when I don't configure my home Wifi connection. Whenever I configure that, 3G stops working. It doesn't matter if Wifi is turned on or off. 3G does have a dynamic ip, where my Wifi connection requires a static IP. But I make all these settings in the Wifi part of the configuration screen, the IP details are under the 802.11 b/g network card.
This used to work flawlessy on my Cruise. Anyone have a solution? Thanks!
good morning. as you are with tmobile i'd suggest you are having the same problems as me with tmobile uk. for some reason tmobile sets up a proxy server in your 3g data connection setup, this caused huge problems for me but clearing it solved them all.
try this first and see how you go.
Possible, but where exactly do I change the proxy settings of the 3G connection?
BeQuietAndDrive said:
Possible, but where exactly do I change the proxy settings of the 3G connection?
Click to expand...
Click to collapse
Hey that's a coincidence, just read the same question at GoT
I have similar problems.
Now and than my HSDPA connection works good, but at some moment I just can't reach any website.
Disconnecting and reconnecting to HSDPA sometimes helps, and sometimes I just have to wait a few minutes and than it works again.
I also tried another DNS (OpenDNS) but it doesn't solve the problem,
Proxy settings can be found at (I assume your dutch):
Instellingen> Meer> Verbindingen> Verbindingen> Mijn proxyserver instellen
At my TD2 is no proxy set, so thats not the cause.
Hope sombody else can help!
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
I had exactly the same problem with my D2. I also had it on my Cruise with the later ROMs. The official HTC 6.1 ROM did not have this problem.
I experience it when I set up my wifi 802.11b/g network card in the phone to have a static IP address and set the default gateway. If I use DHCP there is no problem.
Setting the wifi card up on the phone DEFINITELY screws up the cellular data connection.
BeQuietAndDrive said:
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
Click to expand...
Click to collapse
I use a dynamic IP, for me it doesn't work.
With my dear old Wizard (MDA Vario) I had no problem at all with the same settings!
yup thought i was the only one with this problem need a fix for it soon man otherwise we are gettin bumped for not havin the settings coz we on t-mobile
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
for me i find that the web sites work but any app that requires to go online ie facebook, msn, sky fire etc jus dont work wen you try to connect online......... stupid t-mobile
My connection problems are gone.
Maybe I (we) encountered hickups with the T-Mobile proxy-server....
maybe You can help me.
I have a MDA V (germany T-Mobile) and i can not connect to my AP here at Home.
I have a ASUS WL500g configured as AP behind my Firewall/Router. All other device in my house, a Laptop, a Netbook and a 'WII' working fine!
All get the IP from the Router, the AP works transparent.
D2 will not connect. The Mac-Address from the D2 is configured in the AP, and i can see the router statuspage and see the MAC of the D2 sometimes in the list. But only as "associated" and never as "associated authorized" as the Laptop here in example:
-------------------------------------------------
Stations List:
-------------
00:23:76:yy:xx:xx associated <-D2
00:1C:BF:yy:xx:xx associated authorized <- Laptop
--------------------------------------------------
I configured a lot in the settings, but i cant get the D2 online with wifi.
Can someone plz help a bit?
-
other question: if i manage the problem some day, is it possible to configure the Networksettings of the D2 device in the way that the device only use USB and te WiFI-Connection to access the internet? I hat it that the device use mobile-internet connection without asking me to do so.
Same problem
BeQuietAndDrive said:
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
Click to expand...
Click to collapse
I was experiencing the same problem, only with the difference that I am using 3 different Wi-Fi adapter settings every day (for 3 different networks - two with fixed IP and one with DHCP enabled. Most elegant solution that I came up with was a small, but very handy application called "WiFi Profiles". Settings for WiFi adapter are easily changed by choosing a profile that you want to use and applying it. Before you disconnect from WiFi network, you just set adapter to DHCP, and after that your GPRS/3G/HSDPA connection works like a charm. By the way, I am proud owner of Touch HD but I am using Dutty`s Topaz based rom V3.4 XTREME SHIP.
I am having problem accessing my internet connection through my wireless router. Everytime, i tried to connect my G1 to my SSID, it says obtaining IP address then it says unsuccessful.My wireless router is a LinkSys 802.11N with WPA encryption. I did some research and the G1 only accepts 802.11b/g routers? Is that true?
that could be true since it runs on 3G network... just go buy a new routher. i use my FiOS and there is 802.11g router
A N router should be able to trasmit to G adapters. At least thats how it is with linksys routers. No need to even go get a new router . Look under the settings and see if its just broadcasting N or if can Do N and G.
Had this problem. Change your security to WPA2 Personal Only, not WPA1. Should fix it.
h.nocturna said:
Had this problem. Change your security to WPA2 Personal Only, not WPA1. Should fix it.
Click to expand...
Click to collapse
x2
Thats what I had to do. Please specify more information on what ROM your using. Different ROM's have different Wifi drivers
hi people I am new here!
Any way I got my milestone about 5 days ago and I am quite satisfied with it, exept of the WIFI. My wifi is not listed in the wifis that the phone is getting, somethimes for one seconed or two he is getting my wifi but then disappears again. I have 2.1 android, I tried everything, to change channels, replacing the SSID name, with WEP, without WEP, what I am supposed to do now?
My wifi router is Level One WBR6001 (he is NOT broadcasting only n but b\g mixed)
BTW sorry for my bad english, I am from israel
someone???
When you change the wifi settings, you have to do the same on the phone. GO to he wifi settings, and click forget network, or delete it, than restart the phone.
My settings are :
Mixed Mode, channel 6, WPA-Personal / TKIP and it works very good. Router WRT55GL with Tomato Firmware.
Before i have DLINK 524 and it was crap! Wifi, connect but dont work
If you still have problems, try to connect to the other router of your friend, or on any open network in your city
Greetings!
Due to the fact that our router is in the basement and we're located on the 2nd floor Wifi wasn't strong enough and we had to install a repeater on the 1st floor.
I have multiple Wifi devices and none had any issues with the repeater and the fact that I disabled to SSID broadcast.
Then I bought the Galaxy Tab... after some hours of trying different options I came to the conclusion that it's not a problem of the Galaxy Tab to connect to SSID off networks (at least when the name is like that xxxxx xxxxx), but it won't connect to the network if a repeater is repating the ssid off network.
Is there any known solution to this issue without turning ssid broadcast on?
All I can tell you is that. Repeaters cause alot of issues especially with SSID broadcast turned off. All I can suggest to you is that if you are using a custom ROM and you can connect to adhoc networks. You can always connect via adhoc to any device that is connected to the signal. There is a computer application that can turn you w7 computer to an AP. Connectify
I also have the problem of not being able to connect to my router with the SSID off, but very good with SSID on. Also cannot see adhoc networks at all.
I am currently on Overcome 1.4.6 which is otherwise giving me no problems what so ever.
Any advice would be much appreciated.