Database Develop

WM6: Ok, VPN: Ok, Remote Desktop: NOT Ok - HELP

Hello all,
I have been successful in loading the WM6 ROM: works great! I have been successful at using the phone for Bluetooth DUN. I have been successfull at setting up a VPN connection to my place of employment: I can look at the RRAS server GUI and see that I have established a viable connection.
What I have NOT been successful at is getting Remote Desktop to work. RD is one of the reasons I upgraded to this ROM. Has any one been able to get their Windows desktop on their Treo? If so, how did you do it?
I can't seem to find any pertinent information on how to make this work so anything you can tell me would be a great help.
Cheers,
idyllic

http://forum.xda-developers.com/showthread.php?p=1453117#post1453117
http://forum.xda-developers.com/showthread.php?p=1451613#post1451613

joannaex said:
http://forum.xda-developers.com/showthread.php?p=1453117#post1453117
http://forum.xda-developers.com/showthread.php?p=1451613#post1451613
Click to expand...
Click to collapse
Joannaex,
thank you for the forum pointers. Alas, they did not help. I did try to load the cab file from one of the threads, but it loaded the same version of Remote Desktop Mobile that I already had. I still get the same errors encountered with the previous version. Maybe this behavior is due to the "unofficial" ROM not being fully functional in some way? I don't know. It would be interesting to hear from someone that actually got this to work.
Cheers
idyllic
PS: in occurs to me that this might be a routing issue in the 10.x.x.x/192.x.x.x space. I could verify this if there were a command prompt where I could run things like ipconfig, tracert, netstat, etc. Or a log file that could be viewed. Just wishful thoughts I suppose
PPS: Just found two great progs, one called VXIPCONFIG which give you the info you would get in you did an ipconfig /all. The other is called VXUTIL which you can do PING, TRACERT, WHOIS and a lot more. The utilities are available from http://www.cam.com/windowdsce.html.

I have been able to connect to remote desktop. What has been successful for me has been to already initiate my 3G connection then connect using remote desktop. It doesn't seem to be able to start up the connection itself.

andokai said:
I have been able to connect to remote desktop. What has been successful for me has been to already initiate my 3G connection then connect using remote desktop. It doesn't seem to be able to start up the connection itself.
Click to expand...
Click to collapse
andokia,
I am doing the exact same thing: starting my 3G connection, then my VPN connection, and lastly Remote Desktop Mobile. The RDN ALWAYS times out with one of these two errors: "Connection Status - Cannot Connect. Likely reasons are: 1. Specified computer name or IP does not exist, 2. A network error occurred while establishing a connection." So, I'm kind of at a loss here as the troubleshooting tools available are not great. Thank you for the response!
Cheers,
idyllic

Hi idyllic,
Can you access a remote desktop when a VPN session isn't active? I have used the two separately without problems but haven't tried them together.

andokai said:
Hi idyllic,
Can you access a remote desktop when a VPN session isn't active? I have used the two separately without problems but haven't tried them together.
Click to expand...
Click to collapse
andokia,
no, I cannot access any system. I have tried my home system (firewalls turned off and on). I have tried my work systems (VPN on and off). Nothing seems to work. It's really frustrating to have a tool that you know can help you, but it doesn't work: aaaaaaaaaaaahhhhhhhhhhhhhhhhhhhhhhhh!
Cheers,
idyllic

I'm assuming you're trying to use a local address because you are connecting with vpn first. Did you put the local address in the exceptions list? If not the vpn connection will disconnect anytime you try to use an address that is not in the exceptions list.
Exceptions list: start\settings\connections\connections\advanced\exceptions
then add the local url
Hope this helps. Used to be the problem I had when trying to use VPN.

chris44gw said:
I'm assuming you're trying to use a local address because you are connecting with vpn first. Did you put the local address in the exceptions list? If not the vpn connection will disconnect anytime you try to use an address that is not in the exceptions list.
Exceptions list: start\settings\connections\connections\advanced\exceptions
then add the local url
Hope this helps. Used to be the problem I had when trying to use VPN.
Click to expand...
Click to collapse
chris44gw,
yes, I'm trying to connect to a local addres, but that address isn't a URL. The address I'm entering is an IP address of the machine for which I want to get a desktop. Now maybe I'm wrong, but my understanding is that I can use Remote Desktop Mobile to get, say, a desktop/console of one of my servers.
I've been able to surf the web on the phone, I've been able to use the phone as a Bluetooth modem, I've been able to connect to each of my companies VPN servers. Still now desktop. Whether I enter a fully qualified domain name or an IP address it never works.
Now, I have a little more information. If I just connect to the AT&T 3G network I can do a traceroute to the VPN servers. If I then connect to the VPN (PPTP connection verfied and active) I CANNOT ping anything on the corp. net. It has to be a routing issue I'm thinking. It seems that it needs to be fixed on the phone side, but I can't seem to figure out where to do this.
Anyway, I appreciate the pointer about the URL exception list.
Cheers,
idyllic

That's what mine looks like. Once I'm connected vpn wise into my 2003 server I can RDP into it and another XP machine on the network through the local IP. Only thing I can think of is if you have activesync connecting to an exchange server. It might disconnect the vpn. I think you've said you're verifying the vpn connections so I might look into the firewall on the computer or make sure RDP is on for the computer (although you've probably done that). Good luck though.

chris44gw said:
That's what mine looks like. Once I'm connected vpn wise into my 2003 server I can RDP into it and another XP machine on the network through the local IP. Only thing I can think of is if you have activesync connecting to an exchange server. It might disconnect the vpn. I think you've said you're verifying the vpn connections so I might look into the firewall on the computer or make sure RDP is on for the computer (although you've probably done that). Good luck though.
Click to expand...
Click to collapse
chris44gw,
thank you for the screen-shot. I gave this a try, but no luck. We don't use exchange servers at work and I've verified that no active sync is active during the connect process. Having downloaded a couple of tools to help troubleshoot, I've noticed that I CANNOT ping anything on the internal network: this after verify that the VPN connection active and viable. I have also verified that each system that I am connecting to has RDP turned on. I guess I'll just keep experimenting. I just can't help but think that there is ONE LITTLE THING that is keeping this from working.
Cheers,
idyllic
PS: What encryption level does the Treo 750 VPN app use? 56bit? 128?
PPS: Upon further testing... when I connect to the RRAS server (and connecting to the RRAS server has NEVER been the problem) on the West Coast (Windows 2000 Server std. SP4) I cannot ping the "inside" network. When I connect to the East coast RRAS server (Windows Server 2003 SP2) I CAN ping "inside" network. In either case I still cannot get a remote desktop.

Have the same problem on Diamond
Hi all,
After upgrading to wm6.1 on O2 Diamond unable connect to Remote Desktop.
When manually connected to Internet it works perfect, but from RD Client there is always an error (dial up or Proxy settings). All other programmes can always correctly initiate internet connection via GPRS/UMTS. Via Active sync RD works always.
MFG

Sorry, never got it to work. Call me a traitor, but I now have an iPhone and everything works the way I expect it... with two major exceptions: 1. no cut-and-paste, 2. can't be used as a tethered modem without jail-breaking the phone (which I'm not willing to do).
--idyllic

Similar problem HTC Touch HD
Hi all, sorry in advance if my problem ends up being because I've missed something basic; I'm trying to setup RDC on my HTC Touch HD with no luck. Computer name is right, password is right, IP is right. Fail message:
"connection status. cannot connect. likely reasons are: 1. specified computer name or ip does not exist. 2. A network error occurred while establishing the connection."
I'm connected to my WiFi network which also has the machine i'm trying to connect to on it. I've also tried when out of network range, connecting via 3G/HSDPA. Steps I've taken:
-Enabled remote desktop in system properties on target machine. Haven't added any remote users as it already allows me (admin on target machine) and I'm using those login details to access.
-Allowed RD in the packet settings of Kaspersky antivirus, using the address as the ip of my mobile, found by going to whatsmyip.com, and name as the name I've set on the device.
-Probably unrelatedly, I've also allowed the HTC to access the wifi through the MAC address access list
I can connect via a standard windows machine on the same router (which just needs the computer name, not the IP). Have found this useful as I had the details around the wrong way, but even now it's not working. Based on the tips in the link above, I'm under the impression that I should set things up thus:
Computer: the ip address of target machine
User name: EITHER my username OR MACHINENAME/User Name, e.g. John Smith OR JOHNSPC\John Smith
Password: pw
Domain: either machinename or blank.
Anyone know if this is right / which of the options for username and domain is right?
Cheers
Dez

SlingPlayer problems?

Hi all, I have a weird problem.
I have a tilt and am using the HTC rom, I connect to wifi in my apartment and 3G or HSDPA when I leave the apartment.
When I'm connected through wifi, my Slingplayer works flawlessly, finds my slingbox, and plays the video. When I try to connect outside using 3G/HSDPA, I get "Cannot connect with current connection settings"
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem, and I know that the 3G works fine on my tilt because I have no problem loading websites, using mundi, etc.
Any ideas? I've seen a couple other posts on other forums with the same problem but there were no responses on them.
Thanks!

Can you connect to anything else when on 3G?
Try your proxy settings
Did you change the default ports on the SlingBox config?
Are those ports (default or modified) open from the outside of your firewall/router?
If you have the ability to monitor inbound connections try monitoring while you connect through 3G and see if your device attempts on the correct port and that it is NATed to the correct IP and port.
Raptor

I had exactly the same problem with my Belkin router. You need to set up a port on your router in order for it to work. I know on mine it involved setting up a virtual server.

I am using the TyTN II and I am having the same exact problems. I think AT&T killed access to slingbox somehow. I can surf the internet just fine, and then as soon as I start the slingplayer, my connection gets lost and my phone says "cannot sonnect with current connection settings." Any help would be appreciated, especially with the World Series coming up this week.

cjf2014 said:
I know the Slingbox is working correctly because I can connect to it through a desktop PC without a problem
Click to expand...
Click to collapse
Possibly a silly point but can you definitely connect over the internet to it? Or just over your LAN?
There's a wizard that enables the port forwarding for you - (called Remote Viewing or something?) should be with the software for the slingbox.
Could be that your desktop is just going direct over the LAN?
Also, I had problems when I was just using the automatic settings to configure the box - in the end it works far better if you ignore the UPnP stuff, and use the manual setup process (or so I found). Again, the desktop software wizard steps you through this.

If you can connect over wifi at home, but not over wifi or 3g when away, then unless AT&T are blocking the ports, its more likely your router settings, as at home you are inside your LAN but elsewhere you have to go through your routers hardware firewall.
Just have a look at slingbox's help files.

SlingBox works fine on AT&T. Check your proxy settings on the phone. Try the "remove hidden proxy" cab. The home router also needs an outgoing port defined as well. Good Luck, I know it can work.

I will bet that it's your router/firewall blocking the incoming net traffic. Try connecting to it from a Friend's internet connection or a public computer at the library or something.

Had a similar problem with slingplayer mobile on my new HTC TouchPro- phone from Vodafone but I put in my T-mobile SIM as I wanted to keep the Web and walk.
Slingplayer worked fine from Vario3 with same sim but not from TouchPro. Eventually unticked the use proxy server in the connection settings and it started to work. Weird, as on the Vario the proxy box is ticked and it works.
Anyway, worth trying if anyone else is having problems.

One of two things, either you have not port fowarded your router to allow the Slingbox to be remotly viewed, go to portfoward.com for exact instructions for your specific router, or your hidden proxy is messing with it. More than likley its not port fowarded correctly. BTW...when your in your home network, i.e... using WiFi, it will work without the router being fwded because your slingbox is already inside your home network. When coming from the outside of your home network through 3g or whatever your router has to allow access to the slingbox.

WM6 internet sharing with whole network

Hi, I have a Tilt and do not have a problem tethering to a single computer. What I would like to do is share with all four computers in my home. I have tried bridging the sharing connection to my lan connection and have gotten dhcp on the Tilt to assign addresses to all computers on the network, but they still can't ping each other (other than the tilt and the computer its directly tethered to. I have turned off all firewalls and still nothing. Rebooted everything. Still nothing. Is it possible to do this? Thanks for any help.

There's a program around here somewhere that allows you to make your TILT a wireless router. If you do this, any machine with wi-fi can connect to the SSID and go.
Anyone have the link handy?

Wireless Router
Could I have it connect with my current wireless router to provide internet to my wired network through the rj45 ports on the router ? 3 of the 4 computers are on a wired lan. You see, we just got HSDPA on Monday and I love it. I got a bit ahead of myself and cancelled my home DSL connection. Now I'm realizing that I am stuck with only having one computer on the internet at a time. This has got to be possible. - I just found the thread on setting up as a wireless router. I will start playing with it. Any suggestions/instructions are appreciated.

OK, get connected to your carrier whilst tethered.
Then from any Explorer window on your tethered PC, select, 'Set up a home or small Office Network'.
Select the first option in the following box 'This computer directly connects...' and follow it through.
This should set up your Activesync PC as an IP address of 192.168.1.1. (an access point IP)
If you connect any other PC/laptop to this PC via wireless or LAN (you do know how to do that I hope??) to this computer, it will share the internet connection..
Remember, this will change any prior Internet configuration you have on the PC/Laptop!
Hope this helps.

Internet sharing
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?

jebrown1 said:
Thanks for the suggestion. I am going to try that again. The first time I tried that I found out that the Tilt had already assigned itself the address of 192.168.0.1 . On the XP machine, the computer will always use that same address to share its connection, so it immediately complained that another computer on the network is already using the required address for internet connection sharing. Maybe all I need to do is force the Tilt to use a different ip address like 192.168.0.10? I am not sure how to do that since this is my first time using Windows Mobile as part of a network sharing its connection. The only reference I could find to 192.168.0.1 in the registry was HKLM\Comm\BTPAN1\Parms\TcpIp. Should I change that?
Click to expand...
Click to collapse
NO, 192.168.0.1 or 2.1 or.3.1 are all access point AD's.
You have to go into your PC/laptop Network Places icon to tel IT to then share the connection.
I am sorry, but if you have never shared an internet connection on your PC before (ie via modem or ADSL), you will not really understand how it is done.

Access points
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...

jebrown1 said:
Thanks for your reply. The problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way...
Click to expand...
Click to collapse
OK, set all computers on the network to fixed IP's of 192.168.0.xxx in Internet protocol (under TCPIP on network)with the same subnet mask with a default gateway matching your device! Try that...

sharing
That was my first attempt at a work around. The problem is that there are
actually two network connections to the pc. One for the Tilt (usb) and one for the LAN (nic card). They don't seem to see each other even when they have matching ip addresses and subnets. Thats why I tried right clicking them and selecting "bridge these connections." It seems that internet sharing "requires" DHCP to be used. I tried setting all the computers to use DHCP and actually had the Tilt assigning ip addresses to all of the computers on the network by bridging the two connections and using dhcp. Oddly, though, the computers on the network could not ping the Tilt. I think its because bridging uses the data link layer of the osi networking model?

There must be a hack to change the ip address that windows uses for the sharing access point. Alternatively, it would be nice if there were a device out there that could act as a hub to network usb and 100baseT devices together. In other words, plugging usb and cat5 cable rj45 plugs into the same box and having them all be on the same network.

OK, I have asked smitty to get on this but both of us are WAYYYYy past our bedtimes.
He should get back to you tomoz on this. (he's the Network buff..)
Hope it works out..

this is the app mentioned earlier and may help your solution...
http://forum.xda-developers.com/showthread.php?t=341398

I can't make this work. I don't have WiFi on all of my computers. I was hoping to use WMWifiRouter to connect to my wireless router and then to my whole wired network. Is there a way to make the Tilt wireless router to connect with another wireless router? I'm thinking what I will do is go back to an AT&T rom and use "wireles modem" instead of "internet sharing". That way I can share the modem with the whole network. There doesn't seem to be a good way to use the Tilt internet sharing with the whole network. What do you guys think?

Deleted.....

For any future readers of this thread: I put the stock AT&T rom back on this phone and did a soft reset during the initial boot to stop the bloatware from loading. I went to start>settings>connections and tapped the wireless modem icon to open the app. I selected "usb" and tapped done then plugged the usb into my computer. My win xp computer found the new modem hardware and installed the HTC modem driver. I then setup a new dialup connection on my computer, and used the following to setup the login and dial:
username: [email protected]
password: cingular1
dial #: *99***1#
When I clicked on dial, it quickly connected to the AT&T network and I had internet access on my computer! I went to a speed test website and clocked my download speed at 1.2mbs and upload at 300kbs. I then opened "my network" and started the network setup wizard. I selected "this computer connects directly to the internet" and "file and printer sharing". To make a long story short, I am now able to share the Tilt's HSDPA internet connection with my whole network! I could not do it using the internet sharing function of the Tilt with either the AT&T rom or the kaiser rom. It would be awesome if someone more educated than me could make this function part of the HTC kaiser rom.

Nojnaworb wrote:
.....the problem is that we are trying to make the pc an access point and trying to make the tilt an access point at the same time. They both are using 192.168.0.1 as the default ip address and as far as I tell there is not a way given to change that. The Tilt automatically uses 192.168.0.1 and when you using the sharing wizard on the pc it also uses the same address for its network card thats connected to the home wired network. Unfortunately for me, two devices on a network cannot have the same ip address. There must be a way.......
I have same problem. I agree with Nojnaworb, this is the reason why its not working.
I have no Wifi at home and have to use LAN for my home network (2 PC + 1 ppc).
Under WM5 it was easy to share Internetconnection with all Lan adapters.
I cannot believe there is no way.
PLS Networkexperts, tell me how to setup !!

Its really quite simple.
You dont connect all the computers to the tilt. You use ICS on the tilt to provide one pc with an internet connection.
You then share the internet connection from that pc to the other pc's using the networking wizard.

I think part of this persons problem was that he needed to bridge the 2 connections.
here have this.
http://www.windowsnetworking.com/articles_tutorials/wxpbrdge.html
You should be able to connect the Tilt, (let it use whatever address it wants) and then make a bridge from the tilt to your nic in the server. Then I beleive you just use internet connection sharing to disperse the lovely packets to the rest of the network. Without the bridge, there is no way to share from one network to another.
I'm pretty sure that you will need to set the address to 192.168.0.2 on the server or any other number were the 2 is. If your using a router then I would suggest turning off dhcp and not using the WAN port on it. Just treat the router like a switch/hub because it will just makes things even harder to figure out.
wish we had service that was worth sharing to my network.

At Work- Access network via ActiveSync/USB?

I read somewhere that when hooked up to the PC and activesynch, that WIFI doens't work (which seems to be the case for me) and you can/will access the internet via that method. The trick is you need to have the proxy server that your office uses entered.
I have ooked to my PC at work, and have the Proxy address in, but I still cannot get to the internet.
The one thing that I also seem to remember (can't find that post now) is that somethign about Active synch. I just tried, on the PC, to select "This computer connected to The Internet". It had been auto. didn't help.
Am I trying to do somethign that I can't? If not, any ideas you can share on what I need to set up?

You can allow your phone to use WiFi by checking the box in your ActiveSync settings.

Thanks. That wasn't really what I need to know. I need dto be more clear.
I don't have wifi at work (well I do, but after many attempts and a long thread here, I still cannot connect to it).
What I want to know is can I get to the internet through my hookup to my computer.

ewingr said:
Thanks. That wasn't really what I need to know. I need dto be more clear.
I don't have wifi at work (well I do, but after many attempts and a long thread here, I still cannot connect to it).
What I want to know is can I get to the internet through my hookup to my computer.
Click to expand...
Click to collapse
You will have to speak to your network administrator.
They could be using MAC addressing or simple password access to a proxy. Either will prevent you using the PC's internet access.
You may also find if they do allow you Internet access, any SMTP or apps that use specific ports/protocols may not work.
It's most likely just security at your work establishment!
EDIT: One way I found around it in MAC systems is to add an access point to your PC which can the copy the PC's MAC to itself and use NAT so that the network just thinks its the PC communicating (you will need another NIC in the PC). The Activesync connection does not use NAT in a correct fashion.

this should help, if you cannot view pages @ pda via AS

Accessing the proxy at work with a PC is as simple as entering the dns name in my browser setup on the PC. I an accessing it fine wiht that. IN fact they have the wireless set up so that anyone coming in visiting who is told the proxy dns name can access a 'public' wireless method. But for some reasong my Tilt will not work on either the public one or the private one which is using Peap.
I also find that at home where I know all my network setup I cannot access the Internet via hookup to the computer.
Based on all of that it must be somethign about my Tilt, or more likely, the setup.
BTW...I can access wifi at home and many other places. Just not through the USB and PC or wireless at my work place.
Pulka...I'll check out your item.
Thanks
[edit]
I just re-read Farsquidges post, and that may be something to check out at work. And I know tha tat home, my router is set up to allow specific MACS. I don't think they do that at work. but I'll see if I can get through it at home. My router will display the MACs trying to get through, and I can allow it. At least that will answer if my Tilt is even trying to get through maybe.
[edit 2]
I think I must not know how to set this up to access via the PC. I just attempted at home, and my device seemed set up for Work Network. I'll have to figure this out.

Remote Desktop Mobile

Hi guys,
I've searched LOADS of threads but to no avail.
I have installed RDM, but can't get it to connect. The PC is XP PRP, and my laptop connects ok (running Vista), but with the same settings on my MDA III, it refuses with the error:
"Cannot connect. Likely reasons are:
1. Specified computer name or ip does not exist
2. A network error occurred while establishing the connection."
I've checked all my settings, left DOMAIN blank, disabled firewall etc.
Router is a NetGear.
Thanks guys
Ratzz

Couple of questions... (excuse me if some of these come across quite basic)
Is your laptop that works within your internal network or from an external network?
To what IP address are you trying to connect to (ie. should NOT be an internal 192.168.x.x or 10.3.x.x address)?
Do you have port forwarding or a DMZ enabled on your router?
Are you assigned a static IP address from your provider?

sorry - bit more info...
how are you trying to connect - wifi? over the air?
if wifi, can you get a general data connection through the router?

fatality88 said:
Couple of questions... (excuse me if some of these come across quite basic)
Is your laptop that works within your internal network or from an external network?
Internal
To what IP address are you trying to connect to (ie. should NOT be an internal 192.168.x.x or 10.3.x.x address)?
I used my 'computer name' as I do on my laptop
Do you have port forwarding or a DMZ enabled on your router?
no
Are you assigned a static IP address from your provider?
dynamic
Click to expand...
Click to collapse
connecting through wi-fi which seems to be running ok
HTH, thanks for the response.

hmmm...
excuse me if i'm asking silly questions which you may have already tried...
is remote desktop enambled under 'system properties - remote' on the xp machine?
have you tried connecting using the IP address (192.168.whaterver) of the XP machine as opposed to the PC name?

FANTASTIC!
Worked with the i.p. address
Thanks buddy!!!!

no problemo...

I am having the same problems, but I can get a little bit further, I believe connected, but error message,
"The system could not log you on. Make sure your log on and password are correct, etc. With the little magnifing window on the lower right, then is disconnects after a bit. I use the correct password and case that I use to succesfully connect from other computers. I am stumped.
Bill

a little late I know......but when I get this error while using GPRS/3G to connect........I just initiate an internet connection using the IE button.....then with that running go to start menu and execute the remote desktop again.......and it connects fine.
a little bit of trouble but that is my work around for it.

chipsxj said:
a little late I know......but when I get this error while using GPRS/3G to connect........I just initiate an internet connection using the IE button.....then with that running go to start menu and execute the remote desktop again.......and it connects fine.
a little bit of trouble but that is my work around for it.
Click to expand...
Click to collapse
Anyone know of a fix for that, its a little annoying

There we go....use this software for remote desktop
Have fun dude !!!!!!!!!!!!!

this might be asking alot but i'm trying to connect via wifi and it won't connect.
I have all the info needed only I cant set the port forwarding on my router. It's a D-link DIR-655..
Can anyone help?

vsicarbon said:
this might be asking alot but i'm trying to connect via wifi and it won't connect.
I have all the info needed only I cant set the port forwarding on my router. It's a D-link DIR-655..
Can anyone help?
Click to expand...
Click to collapse
No port forwarding, no can do. That router has to know which IP needs that port.