Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
I read about / tried all the best key-mapping programs (AE Button, hButton, etc.), but I couldn't figure out how do to this..
When I press a certain button once, I want the phone to automatically call a certain contact, without asking for any confirmation. Ideally, announce the name of the contact being called, but no big deal if it doesn't.
Press the same button twice, 3 times, etc. -- the call is placed to other contacts I specify in advance.
I'm just trying to make the PDA car-friendly.. While driving, I still much prefer my $50 Nokia cell phone, which had easy single-button-hold quick-dial.
Thank you for any suggestion..
Hello
I have an att tilt and am a new user. My question is about the voice dial feature and voice launch feature.
In looking at the manual it seems like after you set up the voice feature for each number or program, you still need to go to start / tools / voice dial just to launch it. Is it me or does this seem to defeat the purpose of voice activating a program? You need to hit a series of keys when it might be just as quick or quicker to just launch the program or dial the number.
Does anyone have any suggestions to maybe make this function more easily accessable when you are lets say driving?
Also does anyone know if bluetooth headsets that say they support voice dialing will activate this function?
Thank you
Adam
Your best choice would probably be a bluetooth headset. On those, you just press one button and say who you want to call and it calls.
There's also a program called Voice Commander - but it's not that good yet, it has voice recognition.. just google it or search this forum.
If you're not driving, using smartdial is probably the way to go. Your Kaiser/Tilt should come with it. You just start typing person's name and it appears in the list.
Another opion might be to use HTC Home - you will have about 7-8 boxes with people's names or photos.. you just tap on in and it calls that person.
Oh, and by the way... you can go to start/settings/personal/buttons and assign a hardware button to that voice application.
Hope this helps..
Don't you have a button that activates the voice dial? In my TyTN there is a button on the right side of it. I used to push it accidentally all the time - it made me so annoyed that I turned it off.
Dear Bro,
I am a Nokia convert to Diamond, i was wondering when i received an sms and i would like to call that no. instead of reply, is there a shortcut way?
Cos used to it in Nokia when i view an sms i can just press the call button to call the no. which the sms from.
But in T3DFlo, i can't, is there anyway? or any tweak or software which i can do?
Thanks in Advance.
David Wong
Just click on the persons name/number at the top of the text thread. That will then open the call history log with that person and you can press call to phone them.
Thanks unwire54, but your method only works if the person is already in my contact list, if the person is not in the contact list it will prompt me to add the person to my contact list... if i click no it will dismissed and i back in the message window, cannot call.
Hence i need a way / tweak / app to allow me to call the no. (which the sms was sent from), no matter whether the person is in my contact list.
Is there a way?
anyone knows?
davidwong said:
when i view an sms i can just press the call button to call the no. which the sms from.
David Wong
Click to expand...
Click to collapse
same thing works on diamond. after pressing the call button you'll get a confirmation request ("Verify the number is correct:")of the number and....you can call
have u tried?
it works!!
Thanks KukurikU and unwired4
though i need to dismissed the keypad 1st before i can do so but it works!!
same thing works on diamond. after pressing the call button you'll get a confirmation request ("Verify the number is correct:")of the number and....you can call
have u tried?
I can't do it, can you help me? I have your same rom
maximo88 said:
same thing works on diamond. after pressing the call button you'll get a confirmation request ("Verify the number is correct:")of the number and....you can call
have u tried?
I can't do it, can you help me? I have your same rom
Click to expand...
Click to collapse
go to the sms, be sure you are in the reply box but dismissed the keypad and press the call button. another method is go to all message scroll down to the message but not opening it and then press the call button
THank you very much, I have learnt very well xDD
But I think that touch flow3d needs improvements, because I would prefer to can call without enter in windows mobile's interface
yea i agree
In my old Wizard when you where reading a message just pressed the call button and it asks for number confimation and then press call againan you will dial the person that set the message.
However I thinks its not posible via Touchflo3D app, you need to be in the messages already.
can somebody please tell me how can I send DTMF tones during a call? I searched in everywhere, but couldn't find any clear answers. do I need to install another application?
thanks for ur answers guys..
(HTC Diamond, wm6.1)
as i understand dtmf is enabled by default. i use it all the time with my phonebank.
yes it is enabled in my phone too, but there is no option to send DTMF tones. I am not talking about hearing those tones while dialling a number. what I mean is I made a phone call and connected, and then I want to send a number from my contacts. this is very practical when using the calling cards.
thanks
Press the keypad soft key(left) to bring the phone keypad.
I know it's not "hearing" the tones, as I said I use them to get access to my bank via the phone and that naturally involves quite a few numbers to be received by the other end. And this is carried out rather silently. Unfortunatly I haven't seen a "send number with DTMF" option. Maybe you indeed have to get an extra app to get that to work. The only place i've ever seen an option to even choose DTMF being enabled whatsoever is in schap's advanced config. I can vaguely recall such an option on an old Nokia pone. Sorry though for not being able to help.
ok, thanks for your comments. I appreciate if anyone lets us know if finds such a program.
I use DTMF tones to navigate in my voicemail and everything works fine here.