How can we increase the hardware keyboard timeout?? HELP?? - Touch Pro, Fuze Themes and Apps

I asked this in another forum, really never got a solution, but there has to be a reg edit, the ones for the mogul dont work and this damn thing only stay on for like 7 seconds, pretty annoying to have to keep pressing the keyboard to get it to light back up, help

Install advanced config - In the "input" section you can change it. All the way up to 10 minutes if you want.

i tried that doesnt work even after a few soft resets, anybody else?

Related

I am getting a white screen from Registry ...

I need some help. I was playing around with the program called the Registry Tweaker found here: http://forum.xda-developers.com/showthread.php?t=255225&highlight=registry and I increased some cache and changed the default keyboard to Tengo (a program that lets you type fast) but when it booted up, it was a white screen and nothing else is happening. How can I reflash my ROM again? I was searching for ways to go into bootloader without the activesync doing it but I no info. My activesync is not connecting as well.
Never mind, I figured out how to get into the bootloader and then upload a new ROM from there. Before I was just holding the camera button and then releasing it right away after I press the soft reset button. But the correct way to let go off the reset button and then keep on holding the camera button that takes you to the bootloader.
changing the default keyboard to an (accidentally) incorrect code will cause a white screen on reboot, i just did the same myself, I only needed to hard reset though
Thanks for letting me know. I am going to avoid changing the default keyboard for the future.

Kaiser II / AT&T Tilt problem

Hi. I am a new owner of the AT&T Tilt, so I was messing around with a few cool new features. I installed the HTC Home Plugin and the HTC Default Theme, which looked really nice. After I installed these, things began going crazy. When I had them installed, the screen would not turn back on after going blank, so I would have to remove the battery and then reboot it again. When it loaded back up, I tried to manually power it off via the power button on the side. INstead of powering off, it would freeze. Sucks, I know...
So I finally decided to remove both the plugin and the default screen, as I figured it would send things back to normal. It didn't. When it was all removed, I tried to slide the phone open, but the screen did not automatically switch to landscape view. So I tried to power it off, and it acted as if it was continually loading something and refused to turn off.
This is very furstrating... Do any of you all know what to do?
Thanks.
ShingTse said:
Hi. I am a new owner of the AT&T Tilt, so I was messing around with a few cool new features. I installed the HTC Home Plugin and the HTC Default Theme, which looked really nice. After I installed these, things began going crazy. When I had them installed, the screen would not turn back on after going blank, so I would have to remove the battery and then reboot it again. When it loaded back up, I tried to manually power it off via the power button on the side. INstead of powering off, it would freeze. Sucks, I know...
So I finally decided to remove both the plugin and the default screen, as I figured it would send things back to normal. It didn't. When it was all removed, I tried to slide the phone open, but the screen did not automatically switch to landscape view. So I tried to power it off, and it acted as if it was continually loading something and refused to turn off.
This is very furstrating... Do any of you all know what to do?
Thanks.
Click to expand...
Click to collapse
Try a soft reset and if that doesn't work, back up any data you don't want to lose and then try a hard reset. This will bring you back to factory settings but you lose all your data and added programs.
I have both those things on my Tilt and have not had that happen. Any other third party software it could be reacting with?
Not that I know of. I installed TomTom6 on there, but I had that for several hours prior to putting the two other programs on there and it worked just fine. Is there a way to do a hard reset before the phone turns on fully? Because once it turns on, I am very limited as to what I can do...
Yes.
Put your stylus into the reset hole (just above and to the right of the USB port) and hold both soft keys at the same time (next to the green and red phone buttons).
Hm.. Strange thing happened. I simply held the two soft keys at start up and it seems to have reset the whole thing. Did I do this correctly or should I redo it?
ShingTse said:
Hm.. Strange thing happened. I simply held the two soft keys at start up and it seems to have reset the whole thing. Did I do this correctly or should I redo it?
Click to expand...
Click to collapse
hmm i don't think so you did a hard reset than buddy. Hard reset is holding the two soft keys and than inserting stylus into soft reset hole on bottom of phone. Doing this brings you to a white screen with a warning in blue that basically tells you all data will be erased to proceed hit the send button .. and once you hit send (green button) than it starts the hard reset and once it finishes it asks you to hit the send button again to reboot the phone.
Yeah. STrangely enough, it didn't warn me of any of that. It simply took a while to boot up from the AT&T screen and when it did, all of the stuff that I had installed was gone...
Another question..
Okay, so after about seven attempts, I finally got the hard reset to work properly. Now that everything is back to it's manufacture settings, I would like to update the plain jane look of it. I know this may sound utterly stupid, but can anyone tell me exactly how to install the HTC Plugin along with the HTC Default theme and Customizer? (If links can be provided as to the correct download site, it would be greatly appreciated as well.)
The last time I thought I installed these correctly, my phone went crazy...
Thanks guys.
P.S. TomTom 6 would not have an affect on my phone.. would it?
Thanks again!
no tomtom6 will not affect your phone, I have used it for months with HTC home plugin, didn't have an issue with my tilt. I hope that helps. I don't quite understand what you want to do with the customizer maybe someone else can help ya with that.
Good luck on your new phone.
ShingTse said:
Okay, so after about seven attempts, I finally got the hard reset to work properly. Now that everything is back to it's manufacture settings, I would like to update the plain jane look of it. I know this may sound utterly stupid, but can anyone tell me exactly how to install the HTC Plugin along with the HTC Default theme and Customizer? (If links can be provided as to the correct download site, it would be greatly appreciated as well.)
The last time I thought I installed these correctly, my phone went crazy...
Thanks guys.
P.S. TomTom 6 would not have an affect on my phone.. would it?
Thanks again!
Click to expand...
Click to collapse
Go here, down load HTC Home plugin and Home Customizer again.
Remember to soft reset after installing (no soft keys just stylus in the reset hole) Go to start>settings>today>items,check HTC Home. And you should be good to go.
If not , now you know how to hard reset and start again.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_software_recs
Alright! Thanks a lot!
I'll keep you informed as to how it goes! Thanks again!
Ah! Thanks! It works flawlessly now!
Juuust kidding...
I don't know what it is, but it worked just fine for a while.
Now, whenever I tap the power button on the side to turn the screen off, I can not get it to turn back on.
Why?

HTC Tilt keeps selecting stuff, help needed

Hi guys,
I have a HTC tilt and overnight something wierd happened to it. I switched it on and its was scrolling through the home tab by itself and now thats fixed but its scrolling through all the options in the start menu when it is opened. I flashed a new rom to it, but the same problem persists. When i press the power button to send the phone into suspend mode, the screen switches back on in 2 seconds. I would really appreciate if you guys could help me out. Thanks
check if ur jog wheel on the right hand side is stucked or what. that the only thing I can think of whoich scrolls without u touching.
I have tried that, it doesnt seem to be the problem because when its scrolling and i press any other button, it stops scrolling till the phone is on. But when i put it in suspend mode and it switches back on, the same problem. I dont know what could be causing this problem.
then i think its like a circuit problem or something, cause it means that something is being pressed at all times on a board, which excites screen and scrolling . did u put it in ur pocket and sat tight or something ! j/k
and u also said that it persists even with change of rom, so I think it might be a hard ware problem !
hmm..it did fall down like a week ago, but the problem just showed up last night. Do you think i should open it up and check it out from the inside. But if something is being pressed at all times then the pressing of a button shouldnt stop the scrolling and the phone shouldnt come out of standby by itself.
rashidali_88 said:
hmm..it did fall down like a week ago, but the problem just showed up last night. Do you think i should open it up and check it out from the inside. But if something is being pressed at all times then the pressing of a button shouldnt stop the scrolling and the phone shouldnt come out of standby by itself.
Click to expand...
Click to collapse
okay if it is in warranty dont open it up, even if isnt in warranty,uless u know how to fix it dont open it.
okay, so in first post u said, it was scrolling on home plugin and u stopped it. can u let me know how ?
well i just played around with it a little bit, did a couple of soft resets and took out the battery put it back in, and then did a hard reset. With that it stopped scrolling on the home plugin but then i cliked the start menu and it was scrolling there, then i flashed the rom and it was scrolling through everything i opened, contacts menu options and what not. It only stopped when i pressed a button and then it was fine till i didnt put it in suspend mode. After i put it in suspend mode it switches back on with 2 sec and the same situation. When i leave the screen on, it switches after some time but the QWERT keyboard under it is always on as in you can see the lights on from the small space.
anything, anyone, i did find a temporary fix, it i went into flight mode and switched on the wireless and the bluetooth. The pda remained in suspend mode and the automatic scrolling stopped. But I need a permanent fix.
This has been the most unhelpful forum EVER....
according to what you say it appears that problem is caused by your radio (radio) rom
try different radio first
try different rom second
best wishes,,
rashidali_88 said:
anything, anyone, i did find a temporary fix, it i went into flight mode and switched on the wireless and the bluetooth. The pda remained in suspend mode and the automatic scrolling stopped. But I need a permanent fix.
Click to expand...
Click to collapse
I have tried doing that, i changed from Duttys Hybrid Rom to the HTC tytn rom and i m pretty sure that changed the radio too...But i still have the same problem. I have heard theres a fix by ATT for the tilt when it does something like this, but i cant find it.
Any Help ?
not really try the xda wiki section
i never heard of that fix but try it - you dont have much choices
good luck
I just purchased a Tilt yesterday and I'm having the exact same problem. Sorry I don't have any answers but just wanted to let you know it's not just you. I'm planning on just exchanging the phone tomorrow since obviously no one has any clue what the problem is. Anyway...good luck friend.
Pez
Hey,
Ya i have heard of these cases, apparently ATT has a fix for it, could you be kind enough to ask them for the fix. I would really appreciate it.
Thanks.
yah i have the same problem as of the past few days if anyone can find this fix let me know please.
any news anyone ?
so now my phone wont hit the down button that much ne more its just the up button now, so im beginning to think its not hardware issue

Locking my Diamond

I have recently had to hard reset my phone (long and boring story).
Since then, I have not been able to get some settings the same and it is frustrating me! I hope someone can help.
What I want is for the backlight on the phone to go dim (but not off) after 10 seconds and I want the phone to switch off after 1 minute. So in the power setting I have set the setting for turn off backlight if device is not used to 10 seconds and the turn off device if not used to 1 minute. All is well. However, I want the device to autolock after 1 minute as well. If I enable autolock in advanced config then the device locks after 10 seconds, not 1 minute!
Where am I going wrong?
Thanks
Try [URL="http://forum.xda-developers.com/showthread.php?t=386451&highlight=turn"]this [/URL]. Or this.
Sergio PC said:
Try [URL="http://forum.xda-developers.com/showthread.php?t=386451&highlight=turn"]this [/URL]. Or this.
Click to expand...
Click to collapse
Thanks. I did try a search, but I find its getting harder to find things now!
What I was wondering was why (or how) I managed to have it working previously and yet not again even though I think I had the same set of settings! That didnt sound right to me...
Interesting program that, will have to investigate. But I am sure it can be done natively with the device - that is how it was for me before my hard reset.
You should have the "Lock" app in Settings. You could use it...or you could install Slide2Unlock (S2U2) to do it as well.

Weird Kaiser Hardware Button Failure

Hi all, please can you help me with this!?
Firstly when my phone boots or is taken out of sleep mode it immediately activates voice record as if this button has been pressed. It then opens the dialler and types ‘EDFC’. If I open pocket word and then wake the phone up it also types ‘EDFC’ before doing the above.
My keyboard is not working and the only hardware buttons that function are the power button (only for a while), the camera button and the silver select button in the middle of the d-pad. The jog wheel and silver directional d-pad buttons occasionally come to life. The others don’t work (green call and red end buttons, ok, windows etc).
When I use the standard keyboard SIP on the screen the directional buttons and delete do not function?!
I’ve reverted to a stock ROM to make sure this isn’t the problem.
It appears as though my Kaiser thinks these buttons are being depressed, but I’ve checked them and they click normally and release when pressed (even though they don’t perform a function) so nothing is stuck down etc….
I’m going to use AE Buttons to try and unhinge the button functions for now, but it would be great if someone has any suggestions!!
Thanks in advance.
Update - AE Button won't unhinge the buttons or change their function to anything else (e.g. nothing). I can't stop this from happening every time the phone boots/wakes up!
Help!
Mine got the same symptoms last week except it opens quick something or other,and then the dialler dials 2547.The screen for my pin then comes up,which I can enter normally.Home screen fires up normally but the keyboard will not work or any buttons except the silver one in the middle.Searched a bit and this problem is very common although I cannot find a solution anywhere.Can someone please help
AE button didn't work?
When mine did that, I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!
That's the only solution I have. It's worked for me 2x.
Also try pulling the battery for 20 seconds or so and restarting. That has fixed my touchscreen not working after it gets spashed 3x. Yeah, my phone is old and abused, but keeps working.
Will
wasilvers said:
"I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!"
Click to expand...
Click to collapse
Thanks for your replies - I've got Orange sending me another one in the morning now and sods law it's just stopped happening.... Taking the replacement anyway in case it happens again.
For my knowledge, how did you reset the buttons? I deleted some registry keys to completely stop them working (although I couldn't find the registry keys for the red and green buttons).
Searching on Google there are quite a few reports of this, but no one has ever posted the cause!
I am having the same problem... please help. My phone is going crazy. I did a hard reset but still didnt solve the problem....
I am also having this issue. Phone starts typing EDFC and then initiates the voice recorder. I reflashed various ROMs and regardless of what was flashed.. initially they appeared okay, then it started happening again. I also tried hard and soft resets. Nothng has worked so far.
I resorted to disabling the keys and some of the applications which I dont use which appear to be getting started/run (Voice recorder for one). So far I havent had the issue, knock on wood.
I think this is more than likely a hardware error. My tilt is actually pretty old so I wouldnt be surprised. If someone finds either the cause or a workable solution please post. Im trying to hold off until January when my contact expires to get a new HTC.
I searched and searched but found no solution for this and ended up getting the phone replaced.
HTC seemed to know nothing of such a problem....
Have you tried whacking it?!!?
Hope you get it sorted.
brandall said:
Have you tried whacking it?!!?....
Click to expand...
Click to collapse
Hmm, yes, but I don't see how that helped my phone.
lol, all jokes aside, my friends, I ask in this thread as well,
what is causing this problem? I ran into this issue after ALL my buttons stopped working (except for the power).
I installed a new rom (I forget which one), and still nothing works except for power button.
It would be even better if someone knows the solution!
-Calling for Help-I'm still convinced it is a software/registry problem...
Okay, so there's no solution available for this weird problem of ours.
On the bright side, however, it is amazing that we can still use the phone, even after it requires servicing (some way or another). I have accepted this handicap that has been placed on my phone for now, simply hoping it will grow out of it one day.
But something isn't right. When I looked in the registry (trying to follow some directions I found within the wiki for when your keyboard STILL doesn't work properly), there was a discrepancy between what was supposed to be found in the registry and what was actually there. It wasn't that the values were wrong, it was the names of the values that were different. Why could this be?
Or even if you have moment of time, and you have an AT&T Tilt, and it works perfectly, maybe you could write up a run down of what you have hanging around in that section of the registry?
Hey, just so I can be sure, is there some place I can cross check what I have in my HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP with what is supposed to be there in a fully functioning AT&T Tilt?

Categories

Resources