Kaiser II / AT&T Tilt problem - Tilt, TyTN II, MDA Vario III General

Hi. I am a new owner of the AT&T Tilt, so I was messing around with a few cool new features. I installed the HTC Home Plugin and the HTC Default Theme, which looked really nice. After I installed these, things began going crazy. When I had them installed, the screen would not turn back on after going blank, so I would have to remove the battery and then reboot it again. When it loaded back up, I tried to manually power it off via the power button on the side. INstead of powering off, it would freeze. Sucks, I know...
So I finally decided to remove both the plugin and the default screen, as I figured it would send things back to normal. It didn't. When it was all removed, I tried to slide the phone open, but the screen did not automatically switch to landscape view. So I tried to power it off, and it acted as if it was continually loading something and refused to turn off.
This is very furstrating... Do any of you all know what to do?
Thanks.

ShingTse said:
Hi. I am a new owner of the AT&T Tilt, so I was messing around with a few cool new features. I installed the HTC Home Plugin and the HTC Default Theme, which looked really nice. After I installed these, things began going crazy. When I had them installed, the screen would not turn back on after going blank, so I would have to remove the battery and then reboot it again. When it loaded back up, I tried to manually power it off via the power button on the side. INstead of powering off, it would freeze. Sucks, I know...
So I finally decided to remove both the plugin and the default screen, as I figured it would send things back to normal. It didn't. When it was all removed, I tried to slide the phone open, but the screen did not automatically switch to landscape view. So I tried to power it off, and it acted as if it was continually loading something and refused to turn off.
This is very furstrating... Do any of you all know what to do?
Thanks.
Click to expand...
Click to collapse
Try a soft reset and if that doesn't work, back up any data you don't want to lose and then try a hard reset. This will bring you back to factory settings but you lose all your data and added programs.
I have both those things on my Tilt and have not had that happen. Any other third party software it could be reacting with?

Not that I know of. I installed TomTom6 on there, but I had that for several hours prior to putting the two other programs on there and it worked just fine. Is there a way to do a hard reset before the phone turns on fully? Because once it turns on, I am very limited as to what I can do...

Yes.
Put your stylus into the reset hole (just above and to the right of the USB port) and hold both soft keys at the same time (next to the green and red phone buttons).

Hm.. Strange thing happened. I simply held the two soft keys at start up and it seems to have reset the whole thing. Did I do this correctly or should I redo it?

ShingTse said:
Hm.. Strange thing happened. I simply held the two soft keys at start up and it seems to have reset the whole thing. Did I do this correctly or should I redo it?
Click to expand...
Click to collapse
hmm i don't think so you did a hard reset than buddy. Hard reset is holding the two soft keys and than inserting stylus into soft reset hole on bottom of phone. Doing this brings you to a white screen with a warning in blue that basically tells you all data will be erased to proceed hit the send button .. and once you hit send (green button) than it starts the hard reset and once it finishes it asks you to hit the send button again to reboot the phone.

Yeah. STrangely enough, it didn't warn me of any of that. It simply took a while to boot up from the AT&T screen and when it did, all of the stuff that I had installed was gone...

Another question..
Okay, so after about seven attempts, I finally got the hard reset to work properly. Now that everything is back to it's manufacture settings, I would like to update the plain jane look of it. I know this may sound utterly stupid, but can anyone tell me exactly how to install the HTC Plugin along with the HTC Default theme and Customizer? (If links can be provided as to the correct download site, it would be greatly appreciated as well.)
The last time I thought I installed these correctly, my phone went crazy...
Thanks guys.
P.S. TomTom 6 would not have an affect on my phone.. would it?
Thanks again!

no tomtom6 will not affect your phone, I have used it for months with HTC home plugin, didn't have an issue with my tilt. I hope that helps. I don't quite understand what you want to do with the customizer maybe someone else can help ya with that.
Good luck on your new phone.

ShingTse said:
Okay, so after about seven attempts, I finally got the hard reset to work properly. Now that everything is back to it's manufacture settings, I would like to update the plain jane look of it. I know this may sound utterly stupid, but can anyone tell me exactly how to install the HTC Plugin along with the HTC Default theme and Customizer? (If links can be provided as to the correct download site, it would be greatly appreciated as well.)
The last time I thought I installed these correctly, my phone went crazy...
Thanks guys.
P.S. TomTom 6 would not have an affect on my phone.. would it?
Thanks again!
Click to expand...
Click to collapse
Go here, down load HTC Home plugin and Home Customizer again.
Remember to soft reset after installing (no soft keys just stylus in the reset hole) Go to start>settings>today>items,check HTC Home. And you should be good to go.
If not , now you know how to hard reset and start again.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_software_recs

Alright! Thanks a lot!
I'll keep you informed as to how it goes! Thanks again!

Ah! Thanks! It works flawlessly now!

Juuust kidding...
I don't know what it is, but it worked just fine for a while.
Now, whenever I tap the power button on the side to turn the screen off, I can not get it to turn back on.
Why?

Related

AT&T Tilt Black Screen Fix !

Software incompatibility can cause your AT&T Tilt (HTC 8925) screen to go "Black", without the ability to perform and can render the phone useless.."briking your tilt"
The following fix will return the phone to factory specs only if you were using AT&T ROM. This fix is NOT tested on Other ROMS:
1. Remove your SIM card.
2. Remove your Micro SD Card.
3. Do a Soft Reset.
4. Immediately when the black screen appears, press and hold the On/Off side button ( hold for 25-30 seconds ).
5. Wait for 1 to 2 minutes, until a message appears on its own, saying that the phone reboot is non-functioning due to installing incompatible software. It also asks you if you want to re-set the phone to original factory settings to press "send" ( They mean the button with the green phone picture on it on the bottom of the phone), or press any button to cancel the process.
6. Press the button with the picture of the green phone.
7. Wait for 2-5 minutes and the phone will re-set itself to factory specs.
8. Phone will shut down itself. Turn it on normally and start fresh.
Good luck!
I found this out the hard way. We should start a list of software that does it, heres the first that I found will black screen your tilt, do NOT use this.
Levenums taskbar battery meter
http://forum.xda-developers.com/showthread.php?t=277790
You will black screen and lose everything with it as I found out twice on my tilt. It loads at widows startup during the windows screen.
Another non compatible program!
please note that if you install "arabizer13bn277.exe" or any of its product on your Tilt YOU WILL brick the device and you will need to re-set it to factory ROM.
if u do factory rest
we will loose all the phone nos & information of contact
Im not able to sycn & save Telephone nos & notes on induvisale nos
How else can i save nos on comp
or should i get a new phone & then ask AT&T phone people to help me set it on the new phone
Please help
While this won't BLSOD (BLack Screen Of Death) your Tilt, it will definitely kill your GPS and should be avoided at all costs - Map4PDA.
If you install it and run it, it starts searching for your GPS and eventually hangs, requiring a soft reset to recover use of the phone. After a soft reset, the GPS no longer works. Too bad there isn't an option to manually specify GPS settings because it's a sweet GPS mapping program ala Google Maps that can switch between MS Live!, Google and Yahoo maps (plus one or two others I think...).
Man i hope this works!!!!
I got the black screen from flashing wm6.1 from htc e-club site. The new OS came up fine but when I restored my files with Sprite (only because PIM back up log couldn be found on memory card) the annoying Att animation starts but when the WM6.1 screen is supposed to come up screen goes black. Tilt WILL NOT hard reset with soft keys and stylus! I even attempted to re-flash 6.1 in hopes for a hard reset that way, but usb is even un-responsive! If this black screen reset you posted works, be looking for a donation from me!!!
Any other tips or suggestions would be greatly appreciated! I am new to all of this...but I have read, and read, and searched, and read, and have learned a good bit. But now I need HELP PLEASE!
rednekvolfan said:
I got the black screen from flashing wm6.1 from htc e-club site. The new OS came up fine but when I restored my files with Sprite (only because PIM back up log couldn be found on memory card) the annoying Att animation starts but when the WM6.1 screen is supposed to come up screen goes black. Tilt WILL NOT hard reset with soft keys and stylus! I even attempted to re-flash 6.1 in hopes for a hard reset that way, but usb is even un-responsive! If this black screen reset you posted works, be looking for a donation from me!!!
Any other tips or suggestions would be greatly appreciated! I am new to all of this...but I have read, and read, and searched, and read, and have learned a good bit. But now I need HELP PLEASE!
Click to expand...
Click to collapse
If you have a HardSPL, re-flash your Radio to a newer version. That can fix a black screen if you just upgraded your ROM. Just remember that you may need to try a few before it finally works.
Cant flash anything til I get it to reset.
As of now the phone is TOTALLY bricked! My pc doesn't even recognize it when I plug in usb. Really I'm getting two different screens. one is lit up but black, and the other is bars going down the screen Blk-white-blk-white...
I'm gonna try the steps above when I get home n pray for a miracle! I just had the screen replaed a month ago. I hate to lose her all over again! 8525n it for now!
I got the black screen from flashing wm6.1 from htc e-club site. The new OS came up fine but when I restored my files with Sprite (only because PIM back up log couldn be found on memory card) the annoying Att animation starts but when the WM6.1 screen is supposed to come up screen goes black. Tilt WILL NOT hard reset with soft keys and stylus! I even attempted to re-flash 6.1 in hopes for a hard reset that way, but usb is even un-responsive! If this black screen reset you posted works, be looking for a donation from me!!!
Any other tips or suggestions would be greatly appreciated! I am new to all of this...but I have read, and read, and searched, and read, and have learned a good bit. But now I need HELP PLEASE!
Click to expand...
Click to collapse
I have the exact same issue. I am trying the steps above, but no luck so far. Any tips?
Ok it seems to be working. Any tips on restoring my data that was on the sprite backup?
rednekvolfan said:
As of now the phone is TOTALLY bricked! My pc doesn't even recognize it when I plug in usb. Really I'm getting two different screens. one is lit up but black, and the other is bars going down the screen Blk-white-blk-white...
I'm gonna try the steps above when I get home n pray for a miracle! I just had the screen replaed a month ago. I hate to lose her all over again! 8525n it for now!
Click to expand...
Click to collapse
This is from the manual -
To perform a hard reset using device keys
1. Press and hold the left SOFT KEY and the right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. (It helps to have three hands to do this part).
2. Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press SEND to restore manufacturer defaults, or press any other button to cancel.
3. Release the two SOFT KEYs, and then press the green phone button on your device.
Warning! Your device will be set back to factory default settings.
It worked for me! It returned me to the WM6.1 I just installed!
asfoor said:
Software incompatibility can cause your AT&T Tilt (HTC 8925) screen to go "Black", without the ability to perform and can render the phone useless.."briking your tilt"
The following fix will return the phone to factory specs only if you were using AT&T ROM. This fix is NOT tested on Other ROMS:
1. Remove your SIM card.
2. Remove your Micro SD Card.
3. Do a Soft Reset.
4. Immediately when the black screen appears, press and hold the On/Off side button ( hold for 25-30 seconds ).
5. Wait for 1 to 2 minutes, until a message appears on its own, saying that the phone reboot is non-functioning due to installing incompatible software. It also asks you if you want to re-set the phone to original factory settings to press "send" ( They mean the button with the green phone picture on it on the bottom of the phone), or press any button to cancel the process.
6. Press the button with the picture of the green phone.
7. Wait for 2-5 minutes and the phone will re-set itself to factory specs.
8. Phone will shut down itself. Turn it on normally and start fresh.
Good luck!
Click to expand...
Click to collapse
I had the same exact dang problem about the whole thing about getting the new rom from e-club and using sprite to backup and then upon restore of my back up, i just got a blank screen. I did this trick here and it worked perfectly. The real trick is step 4 and 5. I did what step 4 said to do except i held on for 35 sec instead of 30. and then after that i just pushed the send key (green phone button) a couple of times and then just let it sit for the 1-2 min and the magic message popped up! I followed through with the rest of the steps and voila! It works!
P.S. Dont forget to put your sim card back in.
Anyone get positive result from this method ?
I'm not.
My Kaiser have a black screen after unsuccesuful ROM update, and I can't flash him anymore.
Because PC recognize it as Flash Device, but noone from ActiveSynch driver's does not approach for this mode.
Any solution, please ?
I bricked my tilt after upgrading to 6.1 and using sprite backup to restore my data. I fixed it by putting my tilt in to bootloader mode by holding down the camera button and using the stylus for a soft reset. Once in bootloader mode the usb port on the device worked and I was able to reflash the rom. I will use the new method to restore to factory setting without having to reflash the the rom.
i am having the same problem as supereri and rednekvolfan. did you guys ever figure it out?
Reset worked
Hi everyone.
I had the same issue - backed up data using Sprite Backup, upgraded to WM 6.1 then restored data using Sprite Backup and the custom Device Update file that Sprite Backup requested. The phone reset and then would show the initial ATT and 3G screens then black.
I used the modified steps outlined by live2c2morrow -that are a modification of asfoor's original post and they worked.
Black screen appeared - held the power button for 35 - 40 seconds, pressed the Green Send button a couple of times then waited - 5 minutes later I received the message that the phone failed to boot and was given the option to reset the phone to factory defaults.
The key is to be patient - the screen will appear eventually.
Also - the first few times failed and I think I was inadvertently pressing the PPT or wheel buttons on the other side of the device.
Thanks to everyone on this thread - I thought I ruined my phone!
Sprite Backup - upgrade
I am upgrading my Sprite Backup to version 6 and will try the restore again.

Help

Okay, so my phone is going crazy and it's really aggravating me! It worked fine for two days, but all of a sudden, when I tried to add a picture to my contacts, my phone began to frustrate the crap out of me!
So this is what happens.. When I hit the power button on the side to black out the screen or when it simply times out, the phone pretty much remains on, but I can not get the screen back on. Other times, when I boot the phone the backlight will fail to turn on and the phone won't even switch to landscape when I slide the phone open..
WHY?!?! I have the HTC Plugin installed with HTC Customizer and TomTom 6.. What is the deal?!
That does seem pretty strange. You weren't messing with the registry at all before that happened? Did you try soft reseting the device? (you probably did) If you have been adding and deleting a lot of cabs, apps and such lately then you may have to hard reset and start clean. If you do have to, don't forget to copy your pim.vol file over to your card for replacement after reset. Hopefully it won't come to a hard reset though. Good Luck, Kevin
Ah. I've already hard reset the phone twice...
I don't understand it.. It seems really quite ridiculous.. Could it be a hardware problem?

Stuck on TouchFlo

Hi everyone,
My HTC Touch Diamond phone appears to be stuck on the TouchFlo screen. I can use the hard-buttons to move around the screen and do the essentials, but I somehow cannot use the touch-screen at all.
Strange thing however is that while I am in certain screens (ie: Call History), whenever I touch the screen, I can see the OK button in the top-right corner show up and go away whenever I remove my finger from the screen.
I've attempted several soft resets and removed the battery for a few minutes, yet still at no avail. Anyone have a clue what could be wrong? I am desperate and don't want to do a hard-reset and lose all my data and settings.
Looking forward to your suggestions!
nobody any ideas?
My personal thought on it is that you probably just need to recalibrate your screen... but I can not figure out a way to get to that option without using the screen. If there was a start button it would be easy, but since we have a sleek phone it doesn't have one.
wizardlizard111 said:
My personal thought on it is that you probably just need to recalibrate your screen... but I can not figure out a way to get to that option without using the screen. If there was a start button it would be easy, but since we have a sleek phone it doesn't have one.
Click to expand...
Click to collapse
It may or may not help but a shortcut to align screen is to hold Enter/Action and press Volume Up.
I only know this because my friend is looking for a way to disable this combo for gaming purposes.
The symptoms sounds like you have installed SensorLock.
When i have it activated i can press the hardbuttons and the upper right corner of the screen.
Try flip your phone and see if it unlocks?
All great suggestions guys! Especially the Enter + VolUp was the one I wouldve wanted to try! In the end, I decided to go to HTC Support and they checked the device. Turned out it was a hardware problem: the connector was loose! After pressing a bit around the lower edge of the screen, the connector worked properly again!
Thanks again for the help guys!

Lost Button & Keyboard Functionality

Started experiencing a strange issue with my tilt today..
When I soft reset it loads the Today screen, and then attempts to search for the contact 'wszx' (these keys are located next to each other). After this I can navigate the phone just fine using the touch screen, but the only buttons that work are the directional and center buttons located on the front of the phone, and the arrow keys on the keyboard. I cannot type at all using the keyboard, and pressing any of the other buttons does nothing (except the directional/center/Power). I also cannot Hard reset because the two soft-keys do absolutely nothing. I've hard reset in the past but it no longer works.
So am I SOL? I think I've tried everything.. and now I have a custom rom, etc on the phone and I have no way of getting it back to factory rom without the ability to hard reset.
Thanks for any help.
dam1en said:
Started experiencing a strange issue with my tilt today..
When I soft reset it loads the Today screen, and then attempts to search for the contact 'wszx' (these keys are located next to each other). After this I can navigate the phone just fine using the touch screen, but the only buttons that work are the directional and center buttons located on the front of the phone, and the arrow keys on the keyboard. I cannot type at all using the keyboard, and pressing any of the other buttons does nothing (except the directional/center/Power). I also cannot Hard reset because the two soft-keys do absolutely nothing. I've hard reset in the past but it no longer works.
So am I SOL? I think I've tried everything.. and now I have a custom rom, etc on the phone and I have no way of getting it back to factory rom without the ability to hard reset.
Thanks for any help.
Click to expand...
Click to collapse
Sounds like a hardware issue or simply a bad flash. Have you attempted to reflash the rom? Which rom are you using?
Well...
It wasn't working again this morning, but suddenly - out of nowhere - began to work properly. I'm stumped. If I ever figure out the exact issue I'll be sure to post back.
Thanks
Greetings,
I have same problem on my tytn...
Sometimes it suddenly starts working fine, but shortly it breaks again.
I have tried hard-reseting while it was working, but didnt help.
I think the problem appeared after charging my phone with a motorola v3 charger, so maybe it damaged my phone with over-voltage or something...
Anyway, if someone can suggest something i would be very grateful!
Hi I have exactly the same symptoms with my HTC Tytn II...when you power it on it starts typing letters (in my case CEDF). If the recording button is active it will start recording too. This happened suddenly and I haven't used any other charging apart from the usb and wall socket charger supplied with it.
All buttons (except front center key) and keyboard do not work. Any suggestions would be appreciated very much. This phone is only 8 months old.
Hi,
my Kaiser with dutty's WM6.1WWE ROM did the same this morning Yes I disabled the button 6 and stopped the voice recordings but all the hardware keys but few in the center of the keyboard are not responding. So I cant make or receive calls without taking the stylus out and touching the screen soft buttons andd that's pin in the ... while I am driving. I am using this ROM for almost a year now and I am extremely hapy (up to now) with its performance. When it all happened there were no activities on the phone - I woke up from a SMS notification (Yes I did receive an SMS from my bank) followed by repeting Voice Recordings. Any help will be highly appresiated! Thanks in advance!
keyboard problem
I am experiencing a similar problem with my stock tilt my keyboard does work however none of the text appears on the screen. I have tried hard reset and everything else I could think of, short of a clear storage reload. I would appreciate any help or suggestions from some of you more experienced users.
Bisonwill
anyone ever figure this problem out? im having the same thing happen now.
Same here
I've had it for a couple of weeks now.
I'm running WM6.1 from HTC (rom ver.3.29.422.1 from 2009-01-12) so nothing fancy here.
I even ordered and replaced the D-Pad and I replaced the keyboard (just the sticky part though). I totaly dismantled the phone and didn't find any issues with the cables.
Any ideas would be highly appreciated
Join the club!
This is crazy. My problem is exactly the same. I re-romed to the latest phoenix and it did not change a thing.
Help!
help....
any body here found a solution for the keypad/keyboard yet??? i have the same problem as you guys... any idea, thanks so much...
i have the same problem And there is something else. My Kaiser wakes up every 2 minutes - it's killing the battery. It works only for 6 hours now
Help
bump!!!
No more people with this issue or any solutions?
Pls! Help
ive joined the gang!
I decided to flash my cooked rom ive been working on.
i hadnt changed much in the kitchen and i think the flash has went badly.
it starts booting windows and where it should state "calibrate screen" it goes white and hangs there, buttons seem to respond by lighting up when pressed.
Now when i try to get it into bootloader or even hard reset it just doesnt work.
it just restarts the phone.
before this happened the backspace key hasnt been working for ages.
anybody got any ideas??
(lucky for me i have a backup kaiser!)
I'm having the same problem. Automatic wakeup, applications starting automatically, can't use keyboard, have to to use screen to use phone etc. I've hardreset using the clear storage method, reflashed a couple of times, but nothing helped. So here I am joining the club
If it's not a hardware issue, then try to flash another radio, many of the custom ROMs here doesn't include a radio, so if it's caused by a wrong radio, flash a new ROM without a radio doesn't help.
Check the Sticky for 'how to' if not aware.
PS: Check here for something need to know..
The question is.... how do I flash the device if I cant get it to go to boot loader and the OS wont boot properly !?
I think its an official Brick!
the really odd thing I've discovered is sometimes the OS leaves the loading screen on, and when it does if I press the FN and folder key, I get explorer up but its not responding... I haven't tried inserting a memory card yet to see if I can access that.
Danhargreaves said:
The question is.... how do I flash the device if I cant get it to go to boot loader and the OS wont boot properly !?
I think its an official Brick!
the really odd thing I've discovered is sometimes the OS leaves the loading screen on, and when it does if I press the FN and folder key, I get explorer up but its not responding... I haven't tried inserting a memory card yet to see if I can access that.
Click to expand...
Click to collapse
Try this:
1. Take out the battery from the phone.
2. Take out SIM card and SD card.
3. Press in and hold the CAMERA button.
4. Plugin to your computer using the USB cable, while keep holding press in the CAMERA button.
See does it enter the BOOTLOADER mode.
Once entered the BOOTLOADER mode, you can flash a new radio or rom right from there, in your regular way of running KaiserCustomRUU.exe.(Since you already have a HardSPL flashed on, otherwise a HardSPL is needed to flash first.)
Good luck.
Edit: If the power button and the camera button is still working, you can use the regular way of entering BOOTLOADER mode, and flash from bootloader mode or flash from SD card.
Originally posted by Manpreet @ www.sakajati.com
To enter in bootloader mode:
Simply Switch off your phone. Press and hold camera button and also press and hold the power button..You can remove ur finger from power button when phone is switched on but keep holding camera button until u come to bootloader …Now attach the usb to ur computer and do the flashing you normally do.
Click to expand...
Click to collapse
Thx for your suggestion:
I tried removing battery as sim and sd were already removed due to previous attempts in fixing!
so:
i removed battery (did not put back in), plugged in while holding camera
got nothing, so held power button at same time, the green light came on, then went off, and came back on again. but no bootloader.
i tried same procedure with battery in, and all i get is the OS loading up, no bootloader no matter how long i hold the buttons.
is there any other alternative method to get into bootloader (possibly involving other button presses)?
or any other ideas.
Really want to fix this as it was my "experimental" phone for cooking roms with.
Thanks again.
Suspect you have some hardware issue with the camera button. Can you ever take a photo with it?
Edit: Did you read through every post onthis thread:
MTTY (How to fix a bad ROM flash!)
If you tried that and still no luck, you can post your questions there. There are masters will keep an eye on that thread. And generally they only have time to look into their 'subscribed' threads, chances are they will not look into here.
Edit: Maybe the procedure I told is wrong, since I call from memory, check this:
dwny said:
If you have a bad flash....that's no reason to worry.
I haven't had to use MTTY to recover.
In most cases, if there's no issues with the Rom itself...you can pop out the battery and re-flash the same ROM from BootLoader Mode. This will also work if for some reason your computer crashes or loses power & restart during the FLASH.
If the Rom has issues.....the flash will not complete and the device will be stuck in BootLoader Mode. At this point,you must FLASH a FACTORY ROM!!
Pop the battery off 1st, power up the device, device will power up in BootLoader Mode, connect to pc & FLASH your devices FACTORY ROM. This will restore your device back to it's original out the box settings.
The above only works if the device has been put through the Hard SPL or SuperCID process.
I personally have never tried to flash a cooked ROM without unlocking any of my devices. From what I've read what others have experienced...the flash would just fail and they're stuck in BootLoader Mode.
Myself ... I've experienced bad flashes, bad cooked roms that I've cooked, lost power to a pc & had my pc crash during a flash. Listed above is how I've recovered. There is life after Bootloader Mode.
The only time you have to worry is if your device does not power up at all
As a public chef...it's your responsibility to set the parameters of your ROM! Meaning, Radio, HardSPL, program conflicts, etc.
You are not ultimately responsible if someone bricks their phone but if they pushed the issue, you could be hit with some form of liabilty because you failed on providing a simple Disclaimer that sets the expectation.
I hope I've been helpful.....
Click to expand...
Click to collapse
Edit again:
And try like:
Plug in USB first, and thenn press & hold Camera, Power button etc.
I remember once I read there is a way to enter bootloader without battery, just can not find the original again.

TouchFlo 3D messed up - please help?!?!

Ok, so im new to this, don't go hard on me, but my touchflo 3d thing is messed up.
I tried installing themes earlier and one was fine, then i installed another and after rebooting i noticed a small white square in the top left corner, under the start button. How do i fix that?
Other thing is a added a different clock, because the old one that slid up when placing the finger on the clock and sliding up, got removed when i added the theme.
Now i have this old style clock and I've deleted all themes and everything and soft/hard restarted it, but it continues to have the theme and that old clock.
Can anyone help? i'd VERY much appreciate it.
Is there a way to restore the touchflo 3d, like delete it and re-download it?
i have the sprint phone, btw.
The Htc touch pro (Raphael one)
I guess i piled too many themes on one, because i still see part of one theme and another.
HELP???
When you say you have soft/hard resetted it... what do you mean with hard reset?
If your way of hard resetting it, is turning off the phone and then restarting it... well that is also considered a soft reset.
Hard reset "should" get your device in a state when you first bought it.
Noone has replied so i will tell you how to hard reset if you don't know it. If you do.. well just skip this
first off! Backup your stuff and contacts. hard reset will wipe your phone. Storage cards are safe.
so use pim backup or sump or sync with outlook.
on your raphael: Hold down the volume down button on the side, also hold down the "ok" button. You know the round button in the lower center of your phone. While holding down these 2 buttons use your stylus to reset the device on the bottom near the micro usb. Keep holding down the 2 buttons untill you get a screen with further instructions.. you may let go now. it will ask do you want to go back to default settings. this will wipe your device. and press the button to apply it. volume up or down i believe.
good luck

Categories

Resources